Kompaktiška sieninė linija

Randek AB Compact wall line

Sąlyga: naujas, Gamybos metai: 2025, Firebox output: 510 kW Working output: 407 kW New device, original packaging: Yes Flue outlet diameter: 250 mm Psdpok Utrwsfx Af Nogg Warm air supply ducts: 4 x 350 mm Firebox length: 1900 mm Firebox width: 900 mm Firebox height: 900 mm Air delivery: 26,000 m³/h Power consumption: 4,500 W Designed for room volume: 8,000 m³ Area to be heated: 1,800 m² Oven height without warm air ducts: 3,000 mm Oven width: 1,220 mm Oven length without flue gas fan: 2,700 mm Weight: 1,575 kg

Gamybos metai: 2020, Sąlyga: visiškai atnaujintas (naudotas), 2 semi-gantry cranes for indoor operation extendable to full gantry crane span approx. 8.5 m hook travel approx. 6.0 m Pgedpfomdrt Sjx Af Nog DEMAG single-girder trolley floor control

Sąlyga: geras (naudotas), Gamybos metai: 1990, RANDEK SP700 Crosscut Saw Manufactured by Randek, Sweden Pgjdpjh Ayyqsfx Af Nsg Year of manufacture: 1990 In good condition The SP700 series by Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and highly accurate. It has been on the market for a long time and is continually improved based on close cooperation with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all required cuts. The large saw blade diameter (700 mm) enables you to cut multiple pieces from wood stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Timber clamping near the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Discharge roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to change/errors excepted

Sąlyga: naujas, Gamybos metai: 2024, ♻ MONSTER is a hybrid machine consisting of a PRE-SHREDDER P 150 (equipped with two reduction gearboxes), combined with the SHREDDER SD 90 XL. The MONSTER shredder stands for effective shredding of various types of pallets, polystyrene, plastics, waste, and electronic equipment. ✔ Motor power: 30 kW + 1x 5.5 kW-9.2 kW (shredder + pre-shredder) ✔ Rotor length: 870 mm + 1580 mm (shredder + pre-shredder) ✔ Rotor diameter: 270 mm + 355 mm (shredder + pre-shredder) Pjdpfshwwplex Af Negg ✔ Rotor speed: 80-120 + 5.3-10.3 rpm (shredder + pre-shredder) ✔ Number of cutting blades: 2x19 + 12/12 (shredder + pre-shredder) ✔ Granulation: 10-50 mm ✔ Capacity: up to 60 pallets/hour* ✔ Suitable materials: pallets, polystyrene, electronic scrap, plastic, wood, ... ✔ Feed opening: 2072 x 1070 mm ✔ Dimensions (L/W/H): 3.73/1.78/2.67 m ✔ Weight: 4200 kg 2 years warranty or 2,000 operating hours

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hardwood and softwood Condition: Technically in excellent condition Included in the price: All machines, auxiliary equipment, spare parts, and saw blades 🔧 Main Lines of the Plant 1. Log Handling and First Cut • 25 m chain infeed conveyor for logs • Holtec ES 120 crosscut saw (year: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw type: chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk materials • 5 m discharge roller conveyor 2. Internal Wood Processing • E. Gillette Europe automatic log feeder  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Powered by electrical and hydraulic units • Brenta PN 1600 band saw (2014)  - Roller Ø: 1600 mm  - Capacity: logs up to Ø1200 mm  - Band width: 100–160 mm  - Automatic inlet/outlet with conveyor • Elmed ARGUS 3 metal detector  - Tunnel design with split opening  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edging machine (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / width: 600 mm  - Automatic infeed and roller outfeed 3. Shredding and Removal • Vecoplan VTH 65/25/5/U industrial shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 vibrating table  - Surface: 650 × 2500 mm  - For uniform feed to the shredder • Vecoplan KKF 500-1K-U drag chain conveyor Psdpfx Afswh U Dme Njgg  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, pellets 4. Automatic Cutting to Length and Sorting • Kallfass RA4000R automatic crosscut line (1995)  - Max. cutting diameter: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC multi-blade saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacker (1999)  - Automatic stacking with separator strips  - Max. wood length: 2.5 m 5. Additional Machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw blade sharpening machine  - Blade Ø: 80–700 mm  - Grinding angle: -20° to +30° • Bammesberger FBA2 surface grinding machine  - Grinding length: 400 mm / width: 140 mm • Ingersoll Rand ML30 screw compressor  - Output: 30 kW  - Air delivery: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction System • APW fan – 18.5 kW, year 1998 (2 fans) • Lysair fans – years 1995 and 2020 • 2 cyclones with rotary valve • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be inspected in Belgium by appointment. All equipment is operational and ready for immediate use. Ideal for industrial wood processing or as a full-scale investment.

Gamybos metai: 2011, Sąlyga: labai geros būklės (naudotas), This is a complete plant for house construction. Prices for each item are listed individually. Comprising the following elements (see attached document): Images will follow and are already included in the attached document. Table 1 (Positioning and clamping the stud frame) €34,500 • Adjustable longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Table 2 (Placing and fastening the first sheathing layer) €25,300 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 3 (Placing the second sheathing layer, fastening, and flipping the element onto the next table) €35,650 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity • Hydraulic turning device Table 4 (Installation of electrical systems and insulation) €34,500 • Cross transfer with rollers and sheathing • Table cross-travel function • Connections for compressed air and electricity • Hydraulic turning device Table 5 (Placing the first sheathing layer and fastening the second side) €32,775 • Longitudinal conveyor with 3 hinged belt conveyors • Cross transfer with rollers • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 6 (Placing and fastening the second sheathing layer) €28,750 • Longitudinal conveyor with 3 hinged belt conveyors • Pneumatic cross-clamping • Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 • Longitudinal conveyor with 3 hinged belt conveyors • Hydraulic tilting unit Pgedpfxeu D Amgo Af Nog • Table cross-travel unit • Overhead guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 (placing the first sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 (placing the second sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 (placing the first sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 (placing the second sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Wall storage 1: 12 m long, 24 bays €11,500 Wall storage 2: 12 m long, 20 bays Vacuum lifter with column-mounted slewing crane €9,200 1 traverse, 2 t Abus €20,125 1 traverse, 2 t

Sąlyga: naujas, Gamybos metai: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Pjdpfx Aehw Ng Iof Negg Technical specifications of the saw unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400/50 Hz. TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system with brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for bundle weight up to 80 kg Maximum push feed system speed: 90 m/min Pneumatic lift of pusher at the end of the cutting cycle and overhead return. Data input management: 12-inch TOUCH SCREEN controller (800x600 Pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit cutting cycle (pattern) and enter directly at the controller Transfer cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of the stock length Partial optimization without measuring the panel length Cutting cycle with 3 optimization options (maximum length, sequence, and board order) 1000 cutting lists with 11 sizes each, or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length measurement via photocell Cutting cycle: with 6 optimization criteria (longest length, sequence, board order, volume, minimal waste, and priority length) "OPTI PLUS" package: overall optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects during timber mapping Marking with fluorescent chalks (Note Ð Only available in combination with ZA250) Pneumatic side clamping device

Gamybos metai: 1977, Sąlyga: visiškai atnaujintas (naudotas), I am selling a Rapid DGS double mitre saw, year 1977. Swivelling heads. Drilling heads on each side at the front included. In very good condition. Available immediately. Pedpfx Aod N Rb Def Njgg

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 24 h, keliamoji galia: 3 000 kg, kėlimo aukštis: 6 000 mm, laisvas kėlimas: 1 718 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 643 mm, šakių laikiklio plotis: 1 750 mm, šakių ilgis: 1 200 mm, tuščias svoris: 5 814 kg, bendras ilgis: 1 600 mm, pavaros tipas: Elektro, statybos plotis: 1 540 mm, Keturkryptis šoninis krautuvas Krovos centras: 600 mm Šakių plotis: 125 mm Šakių storis: 50 mm Pjdpfx Afsv Tf Are Negg ISO klasė: ISO 3 klasė = 2 500 - 4 999 kg Stiebo tipas: Triplex Techninė būklė: labai gera Priekinės padangos tipas: pilnos gumos Priekinės padangos dydis: 406 x 176 mm Priekinės padangos būklė: 80–100% Galinės padangos tipas: pilnos gumos Galinės padangos dydis: 559 x 254 mm Galinės padangos būklė: 80–100% Baterijos įtampa: 48V Baterijos talpa: 930Ah Baterijos metai: 2025 Baterijos būklė: nauja Integruotas šoninis poslinkis (+/- 100 mm), hidraulinis šakių padėties nustatytojas (uždaryta padėtis 290 mm, didžiausias atstumas 1750 mm (išorėje nuo šakių iki išorės)), 3-iasis vožtuvas, 4-asis vožtuvas, darbinis žibintas gale, darbinis žibintas priekyje, šildymas, pilna kabina, pilnas laisvas kėlimas, CE sertifikatas, saugos šviesa, LED darbiniai žibintai (2 į priekį, 2 į šoną), posūkio švyturys, atbulinės eigos įspėjamasis signalas. Spalva: Combilift Hi-Vis žalia (RAL 6018) ir pilka. Pagalbinis hidraulinis valdymo vožtuvas su 2 žarnomis, baigiančiomis šakių laikiklyje.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 9 100 mm, bendras plotis: 3 600 mm, Mūsų įmonė gamina įrenginius ir sistemas namų prefabikacijos gamykloms. Gaminame stacionarius surinkimo stalus, sukamus stalus, „drugelio“ stalus ir pilnas gamybos linijas. Siūlome naują surinkimo stalą, kurio matmenys 3,6 m x 9,0 m. Pgsdovv Rv Ajpfx Af Nog - Konstrukcija padengta milteliniais dažais - Stalo paviršius dengtas faneros plokšte su smūgiams atsparia danga - Angos SD-01 spaudimo cilindro montavimui - Išimami ir reguliuojami ribojimo kaiščiai - Modulinė konstrukcija savarankiškam surinkimui (vienoje paletėje) - Mažos transportavimo išlaidos visoje Europoje