Surfinisher / Vibroapdirbimo įrenginys

Rösler RMSF-4/800 / R 12/6 SM-E / Z1000

The system consists of a complete Surfinisher system including suction station, undersize grain screening station, complete water treatment system, and water tank by Rösler.

Deburring performance with a 20-second immersion time is approximately equivalent to the performance of 10–15 minutes in a conventional vibratory finishing system.

Rotating Working Container RMSF 4/800
- 1 piece circular plastic container
- Working container diameter: 850 mm
- Working container depth: 500 mm
- 1 piece quick-release coupling for easy container change
- 1 drive motor, output 7.5 kW
- 1 dosing unit D1-K/320 SF (process water), on stand
- 1 stand for inlets to the working container
- 1 flow monitoring system (with flow switch)

Undersize Media Screening:
- 1 media return system
- 1 base frame as a stable welded construction
- 1 balancer for weight compensation (media + hose + nozzle) incl. mounting rack
- Hose suspension on the base frame
- 1 vacuum generator to produce negative pressure
- Connection of the piping system to the transfer device of the vibratory finishing system
- Suction hose with nozzle, approx. 5 m
- 1 500-liter collection tank as cyclone separator
- For collection of process media extracted from the working container
- For delivery of process media to the screening machine
- Including automatically actuated shut-off valve and hose for returning process media to the screening machine
- 1 spray nozzle for rinsing the collection tank
- 1 two-hand control for flap
- 1 dosing station DZ1-K

Rösler Screening Machine R 12/6 SM-E
- For undersize media screening
- Total length: 1,400 mm
- Total width: 1,160 mm
- Screening area: 1,200 x 600 mm
- Discharge height: 1,065 mm
- Step in the separation zone: 1 x 40 mm
- Vibration motors, drive power: 2 x 0.525 kW
- Vibration motors mounted laterally
- Motor speed: 1,500 rpm
- Operating voltage: 400 V, 50 Hz, 3 Ph N/PE

Rösler Centrifuge Z 1000 ASS-II Turbo with automatic sludge discharge
Consisting of:
- Centrifuge Z 1000
* Centrifuge rotor made of aluminum alloy
Dedpfxsyngito Aaiswa
* Speed: 2,050 rpm
* Reduced peeling speed via frequency converter
* Automatically retractable peeling knife
* Sludge quantity per cycle: up to 25 kg
* Automatic residual water discharge
* Long bearing life due to relubricatable special bearings
* Electronic vibration monitoring
* Automatic rotor rinsing

Equipment:
- 1 sludge wagon RSKM 30
- 1 combined waste water and process water tank 700/700 liters
- 1 flocculant dosing pump DP2
- 1 automatic additive dosing station DZ-4/320
- 2 suction lances (empty tank monitoring)
- 1 noise reduction package approx. 80 dB(A)
- 1 cooling unit RK 3
- 1 titration test kit for manual compound measurement

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.