Pirštinis frezavimas, 17 vnt.

Protostar Ø32 x 40mm

Gamybos metai: 1999, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg Nsdpor A Hcbefx Af Heda General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Būklė: naudotas, Module milling cutter Module 8 20 degrees Length 1800 mm Diameter 120 mm Nodpfxedklt Ns Af Hoda Bore 40 mm

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Ndedpfxeh Ek Dao Af Hsa Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1990, Pressure: 25 t Outreach: 160 mm Installation height: 500 mm Table size: 650 x 650 mm Ram surface (round): 140 mm Stroke: 130 mm Power requirement: 4 kW Weight: 2000 kg Height: 2100 mm Width: 1100 mm Njdpfx Afjfcw Apo Hsda Depth: 1500 mm

Būklė: labai geros būklės (naudotas), Focker Strähler Welding Positioner, 8 Tons - Load Capacity: 8,000 kg Ndedpfx Aef Ezdnef Hsa - Equipped with hand and foot remote control - Infinitely variable speed and tilt adjustment - Rotation speed: 0.02 rpm to 1.1 rpm - Table diameter: 1,500 mm - Height to center (tilted): 1,170 mm - Height (horizontal): 1,400 mm - Length: 2,400 mm - Width: 1,500 mm - Condition: Visually and technically impeccable, operates very quietly

Būklė: naudotas, Räummaschine Ndodpst Hr Dfjfx Af Hsa

Būklė: naudotas, Gamybos metai: 1996, Diameter / mm Workpiece length / mm Length / mm MITUTOYO SURFTEST SV-500 roughness tester with OLZE measuring plate Dimensions: 600 x 600 x 80 mm Nsdstvm Smopfx Af Hsda Target µm: 16 Actual µm: 10.00 Net weight: 85 kg Information regarding scope of delivery The package contains only the ordered product. Any additional decorative items or other objects shown in the product images are not included in the delivery.

Gamybos metai: 1987, būklė: naudotas, mašinos/transporto priemonės numeris: 34, max. traction force: 10 t max. stroke: 1000 mm Cutting speed: 7.5 m/min Return speed: 24 m/min Nedpjnd Dmjfx Af Hjda Weight: 6.2 t Machine is suitable for tube clearing

Būklė: labai geros būklės (naudotas), 10 x deep hole drills, manufacturer: Botek 3 pcs 6.5 x 320 mm 2 pcs 10.2 x 190 mm 3 pcs 10.4 x 250 mm 1 pc 11 x 350 mm 1 pc 11 x 270 mm Weight: 1.5 kg Ndedpfx Ajhl Awdjf Hsa

Būklė: naudotas, TOX Clinching Unit – Pneumatic-Hydro TOX Press Hydro-Pneumatic Press TOX Pressotechnik KRAFT PAKET Model: CRS 03.62 Serial No.: 207599.2 Year of manufacture: approx. 2005 Nsdpjdz Sqqjfx Af Hoda Pressing force: max. 80 kN = 8 tons Throat depth: 20 mm Installation height: 32 mm - integrated clinching tool - pneumatic valve for actuation - for joining by mechanical interlock (clinching) - for creating a form-fit connection between two sheets without piercing or heating the material - mounted on stand - with basic electrical control and foot switch Net weight: 230 kg From a production line, sold without electrical control unit