Suvirinimo sukamasis stalas 3 ašysReguliuojamas aukštis

Protec KT 3000 HV

Būklė: beveik kaip naujas (parodų įrenginys), 3,000 kg welding positioner, hydraulically height-adjustable Speed: 0.05 to 0.6 rpm Table diameter: 1,200 mm Tilt angle: 0 to 120° Total height adjustment: approx. 700 mm Height adjustment with vertical plate (up to center): 960 mm to ~1,910 mm Dimensions with horizontal plate: 1,200 mm to 1,900 mm Fodpfx Ahjdvn E Uswefw

Būklė: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre band saw K-tech DG 50/33 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min Fedefg E Hljpfx Ahwofw - Hydraulic cutting pressure control valve - Hydraulic operation of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off 5. Raise frame just above the material 6. Open vice

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 3 000 kg, Protec KT 3000 HV, hydraulically height-adjustable Load capacity: 3,000 kg Handheld remote control with digital display Dual foot pedal control Height approx. min. 700 mm (horizontal), max. height 1,400 mm Turntable diameter: 1,400 mm Tilting angle min. 135° Rotation speed: 0.05 to 0.9 rpm Motor power: 3 kW We offer a huge selection of turntables of all sizes, with load capacities from 100 kg to 30 tons Used and new machines available Fedpsq U Ac Defx Ahwofw

Gamybos metai: 2022, būklė: naujas, 3,000 kg welding positioner, hydraulically height-adjustable Speed: 0.05 to 0.8 rpm Ffodpfx Aeff Ngiohwow Very robust, complete set with hand and dual foot remote control Table diameter: 1200 mm Tilt angle: 0 to 120° Total height adjustment approx. 700 mm Height adjustment (vertical plate center): 960 mm to approx. 1910 mm Dimensions with horizontal plate: 1200 mm to 1900 mm We offer turntables in 600 kg, 1,000 kg, 3,000 kg, and 5,000 kg versions

Būklė: naujas, Capaciteit, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radiusverschil ----- 90 mm Buigsnelheid/herhaalbaarheid ----- 500º/s. ±0,05° Buislengte ----- 1.350 ∞ mm Gewicht ----- 2.200 kg Machineafmetingen ----- 3,0 x 1,2 x 1,3 m Buisrotatie ----- 0–850°/sec Lengteaanvoer ----- Standaard 0–2.400 mm/sec Booster ----- 0–1.200 mm/sec Tolerantiegraad ----- 0,05°/mm Draaibeweging van de buigkop ----- 0,75 sec Standaard componenten voldoen aan VDMA-, ISO- en DIN-normen. OPTIES * Online koppeling met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaaddetector en buispositioneerder via elektromagnetische of optische detectie Ffsdpfx Ahoga T Exewow * Vrije radiusbuiging * Simulatie/Collision Control * Verlenging van het bed

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Protec KT 3000 HV, hydraulically height-adjustable Load capacity: 3,000 kg Handheld remote control with digital display Dual foot pedal control Height approx. min. 700 mm tilted to center, max. height 1,400 mm Faceplate diameter: 1,400 mm Tilt angle: min. 135° Rotation speed: 0.05 to 0.9 rpm Motor power: 3 kW Fjdpfxofky Iqo Ahwofw

Gamybos metai: 2023, būklė: naujas, 3000 kg welding positioner, hydraulically height-adjustable Complete set Speed: 0.05 to 0.6 rpm Table diameter: 1200 mm Tilt angle: 0 to 120° Total height adjustment: approx. 700 mm Height adjustment with vertical plate (up to center): 960 mm to approx. 1910 mm Fedpfsk Adlijx Ahwsfw Dimensions with horizontal plate: 1200 mm to 1900 mm

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: Ffedpfjfxyhfex Ahwow The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: naujas, Gamybos metai: 2023, Protec KT 3000 HV, hydraulically height-adjustable Load capacity: 3,000 kg Handheld remote control with digital display Dual foot pedal control Height approx. min. 700 mm tilted to center, max. height 1,400 mm Faceplate diameter: 1,400 mm Ffodpfx Aoqvnh Tjhwow Tilt angle: min. 135° Rotation speed: 0.05 to 0.9 rpm Motor power: 3 kW

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019, Protec KT 3000 HV, hydraulically height-adjustable Load capacity: 3000 kg Ffodpfod Ig H Aex Ahwjw Hand remote control with digital display Double foot remote control Height approx. min. 700 mm horizontal, max. height 1400 mm Faceplate diameter: 1400 mm Tilting angle min. 135° Speed: 0.05 to 0.6 rpm Motor power: 3 kW

Būklė: naujas, Gamybos metai: 2026, bendras svoris: 1 000 kg, Geriausia kokybė 3D skylėtas stalas 3000 x 1500 x 200 mm, tinklelis 100 mm, plokštės storis 20 mm, skylės skersmuo 28 mm, Lygiu paviršiumi, itin masyvus, svoris apie 950 kg Su 6 kartus reguliuojama stalo koja Fsdsx Nihijpfx Ahwjfw Kaina be priedų, priemoka 500 € Supakuota medinėje dėžėje, siuntimas teiraujantis

Būklė: naujas, keliamoji galia: 3 000 kg, Protec KT 3000 HV, hydraulically height-adjustable Load capacity: 3000 kg Handheld remote control with digital display Double foot switch Height approx. min. 700 mm (tilted to center), max. height 1400 mm Ffjdpst Sk Imjfx Ahwsw Faceplate diameter: 1400 mm Tilt angle min. 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW Optional: with original Siegmund perforated plate, octagonal plasma-nitrided worktable 1800 x 25 mm with 28 mm boreholes (surcharge applies)

Būklė: naujas, keliamoji galia: 3 000 kg, Protec KT 3000 HV, hydraulically height-adjustable Load capacity: 3000 kg at a load centre of 300 mm Handheld remote control with digital display Double foot pedal control Height approx. min. 700 mm tilted to centre, max. height 1400 mm Faceplate diameter: 1400 mm Minimum tilt angle: 135° Fodpfx Ast Ugm Rjhwefw Speed: 0.05 to 0.9 rpm Motor power: 3 kW Perforated plate available at extra cost

Būklė: naudotas, Gamybos metai: 2014, maks. tekinimo skersmuo 160 mm maks. tekinimo aukštis 150 mm maks. ruošinio skersmuo 100 mm maks. ruošinio aukštis 150 mm maks. sukimosi greitis 6 000 aps./min X eiga 700 mm Z eiga 375 mm Fodpfx Aheqvd Iqowefw C ašis 360 ° Valdymas FANUC Vertikali tekinimo staklės | EMAG - VL2 Įrengta ruošinių cirkuliacine juosta. Staklės labai geros būklės. Atkreipkite dėmesį, kad techninės detalės buvo pateiktos pagal panašius įrenginius.