šaltasis pjūklas

ProfiFeed Technologies S200 Semi-Automatic Steel Saw

Gamybos metai: 2013, būklė: naudotas, Cutting diameter: 420 mm Saw blade length: 41 x 5600 mm Dedpsd Izmaefx Ad Ijup Cutting width: 1.3 mm Control system: Simatic S7 Touch Band speed: 17 - 110 m/min Saw motor: 7.5 kW Round material diameter: 420 x 3000 mm Round material diameter: 300 x 6000 mm Total power requirement: 30 kW Machine weight: approx. 18.5 t Space requirement: approx. 12.5 x 5.0 x 2.5 m CNC sawing system with JAESPA Compact 4S bandsaw including round bar magazine and unloading gripper, designed for sawing round bars from 50 to 420 mm. The magazine features 6 storage compartments, each with a maximum bar weight capacity of 3,400 kg. Cutting lengths range from 20 to 1000 mm. Like-new condition, approximately 1,000 operating hours.

Būklė: naudotas, Gamybos metai: 1982, Spindle diameter: 90 mm X-axis travel: 900 mm Y-axis travel: 900 mm Z-axis travel: 1200 mm W-axis travel: 800 mm Table clamping surface: 900 x 1200 mm Rotational movement: 360 degrees Table load capacity: 6.0 t Spindle speed: 25 – 1400 rpm Spindle taper: ISO 40 Power supply: 380 V / 50 Hz Milling spindle drive: 9.2 kW Total connected load: 35 kVA Machine weight: approx. 10 t Space requirement: approx. 4.5 x 2.8 x 2.5 m The machine was completely overhauled by the manufacturer in 1994, including: Djdpetv H Ucsfx Ad Ijup - new electrical cabinet - new BOSCH servo drives and Heidenhain TNC 360 control (3D control) - facing slide Ø 600 mm, travel: 150 mm The machine is currently not ready for demonstration due to an electrical fault.

Būklė: beveik kaip naujas (parodų įrenginys), Grape pomace conveyor SMB Spezial-Maschinenbau, designed for feeding presses with fermented mash as well as for removal of stems or pomace. Curved conveyor belt with side walls, conveyor belt width approx. 400 mm, conveyor belt length approx. 2,600 mm with attached inclined conveyor, conveying height approx. 1,600 mm, stainless steel frame (with castors). Duedpfx Aohrzaaed Isp

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, HYDRAULIC HIGH PERFORMANCE BAND SAW LINE MAKE: BEHRINGER MODEL: HBM 440 A YEAR: 2023 Sawing capacity (round): 440 mm Sawing capacity (flat W x H): 440 x 440 mm Minimum (round / flat): 15 mm / 12 x 12 mm Bandsaw blade dimension: 6700 x 54 x 1.1 mm Drive power: 11 kW Cutting speed: 15 – 150 m/min Material feed per stroke: 600 mm Material feed multiple strokes: Max. 5400 mm Machine weight: 4600 kg Dimensions (L x W x H): 4900 x 2650 x 2700 mm Height for transport: 2700 mm All information without guarantee – subject to change and error Coolant system: 200 l Full saw enclosure Chip conveyor BEHRINGER BT 65 TOUCH CONTROL + AUTO FEED CONTROL Automatic bar change, max. 3000 kg Infeed side: Magazine KM 45 F-VR (600–6,200 mm) Round material: 50 – 440 mm Flat material: 40 x 20 – 400 x 400 mm or 440 x 430 mm Duodpfx Adsxw T Uge Iop Bar length: 600 – 6,200 mm Driven roller conveyor: 6,100 mm Material stock: 3,000 mm usable Safety fence Outfeed side: Output: Metal belt, ejection plate, delivery table Metal belt: For transporting cut pieces, good parts and remnants Belt width: 550 mm, length: 4,200 mm Guides fitted on both sides up to 1,000 mm length Side ejector for short bars (pusher) Table for cut pieces and material: max. 1,000 kg, length 2,400 mm, usable depth: 1,500 mm Subject to prior sale

Būklė: beveik kaip naujas (naudotas), Manufacturer: Parker Duodpfog Snulsx Ad Iep Type: T / D RAPID 1.5 x 4 Dimensions: 1,500 x 4,000 mm Deck: 3

Būklė: naujas, Gamybos metai: 2026, The automatic column-type band saw CORMAK H - 300SA is a high-performance machine designed for automatic cycle cutting of bars, pipes, and profiles made of steel, cast iron, and non-ferrous metals. Its robust saw frame and column construction ensure excellent rigidity and outstanding stability during the cutting process, even with the most challenging materials. The saw is equipped with a PLC controller and an intuitive touchscreen interface. Manual mode allows all operations to be performed from the machine’s control panel. Automatic mode – upon activation, the complete cutting cycle, including clamping the workpiece in the vise, advancing it to the selected length, lowering the saw arm for cutting, and raising the arm to the preset height after the cut, proceeds without operator intervention. Cutting parameters such as number of cut pieces, their dimensions, blade speed, and descent speed are set via the control panel. The machine stops automatically upon completion of the programmed batch, in case of blade breakage, or if another fault is detected by the saw’s control system. The blade drive, based on a frequency-inverter-controlled motor, provides smooth speed adjustment over a wide range. In the event of blade breakage, the machine halts automatically. Accurate blade guidance is ensured by guide bearings and carbide inserts. The movable blade guide head is set according to the size of the material, which enhances blade stability. A coolant system and cleaning brush prolong blade life and maintain optimal cutting conditions. Hydraulically forced descent of the arm is precisely adjustable via a throttle valve. The rapid-feed system shortens cutting times for individual sections. The hydraulic feed system enables a fully automatic operation cycle. The controller, equipped with an LCD display, facilitates programming of the saw, signals material end, displays errors, and provides a cut-piece counter after the programmed cycle. Maximum material feed per stroke is 500 mm, with accuracy of +/- 0.2 mm per stroke. Technical Data: Cutting capacity: ∅ 300 mm / □ height 300 mm x width 300 mm Bundle cutting: max 260 x 90 mm Dsdoiz S Nyjpfx Ad Ioup Blade (length x width x thickness): 3505x27x0.9 mm Cutting speeds: 40/60/80 m/min Feed speed: hydraulic, stepless adjustment Motor: 3.8 kW Hydraulic unit: 0.75 kW Coolant pump: 0.09 kW Feeder stroke: 500 mm Load capacity: 1500 kg Dimensions (L x W x H): 1750 x 1950 x 1550 mm Weight: 1200 kg

Būklė: naujas, Gamybos metai: 2025, pjūklo disko skersmuo: 480 mm, High-Performance Everising Circular Saw Fully Automatic Machine (NEW) incl. magazine. Suitable for use with thin-kerf circular saw blades (carbide / cermet). Basic data: • Working range: 70-160mm round • Drive: 15 kW • Blade dimensions: 480 x 2.7 x 2.25 • Saw blade speed: 30 – 125 rpm • Weight: 5 tons • Dimensions: 3100 x 7530mm (incl. magazine) Equipment: Djdpfx Ajq Ul Rked Ioup • Automatic loading magazine 6 meters (for 6-meter bar material) • Emulsion cooling option • Siemens control system • Electromagnetic braking system • Direct-drive saw spindle for exceptionally high cutting performance • Ball screw incl. servo motors for precise feed • Heavy-duty design • Minimum quantity lubrication system • Inverter-controlled, stepless cutting speed • Fully enclosed, low noise • Automatic cut-off and scrap piece sorting • etc. Other available models: P-50 ILA: Cutting range 8-50mm P-75 ILA: Cutting range 10-75mm P-100 ILA: Cutting range 15-100mm P-150 ILA: Cutting range 70-150mm P-160 ILA: Cutting range 70-160mm P-180 ILA: Cutting range 70-180mm P-230 ILA: Cutting range 70-230mm

Būklė: naujas, Gamybos metai: 2026, The CORMAK H - 260 SA Automatic Column Band Saw is a high-performance machine designed for automatic cutting cycles of bars, pipes, and profiles made from steel, cast iron, and non-ferrous metals. A robust body and heavy-duty saw frame combined with a column design ensure excellent rigidity and an exceptional level of stability during the cutting of even the most challenging materials. The saw is equipped with a PLC controller and a user-friendly touchscreen interface. This saw allows for operation in both manual and automatic modes. Manual Mode enables all operations to be performed manually from the machine’s control panel. Automatic Mode – once the machine is started, the entire cutting cycle, i.e., clamping the workpiece in the vise, feeding it to the set length towards the saw blade, lowering and raising the saw arm to the required height after the cut, takes place automatically, without the need for operator intervention. Cutting parameters such as the number of cut pieces, their dimensions, saw blade speed, and arm descent rate are set on the control panel. The machine will automatically stop at the end of the programmed series, in the event of a blade breakage, or in case of other faults detected by the machine’s control system. The machine body is a cast iron component mounted on a rigid, heavy-duty frame. The enclosure houses the hydraulic unit, coolant tank with pump, and swarf conveyor. The blade drive uses an inverter-controlled motor, allowing for smooth and wide-range speed adjustment. The hydraulic blade tensioner provides optimal working conditions. In the event of blade breakage, the machine stops automatically. Maximum cutting performance and extended blade life are ensured by the cooling system and a cleaning brush. A hydraulic material feeder delivers a fully automatic working cycle. The controller, equipped with an LCD display, enables programming of all saw functions, indicates material end, reports faults, and provides data on the number of cuts after the programmed cycle. Maximum feed length per single stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. The innovative design and manufacture of CORMAK semi-automatic and automatic band saws according to ISO:90001 and ISO:140001 standards guarantee safety, quality, and reliability. Reliable operation is further assured by the use of motors licensed by ABB, a world-renowned industry leader. Technical Data Dedpfxeiz S I Hs Ad Ieup Cutting range: Ø260 or 260 x 260 mm Blade: 3150 x 27 x 0.9 mm Cutting speeds: 40/60/80 m/min Motor: 2.2 kW Hydraulic power unit: 0.75 kW Coolant pump: 0.09 kW Feeder stroke: 500 mm Load capacity: 1500 kg Dimensions: 1600 x 1800 x 1550 mm Weight: 1000 kg Maximum cutting range Angle 0º ø260 | 260 × 260 mm Standard Equipment - Automatic cycle operation - Arm position memory function - Built-in hydraulic unit - Vise position memory function - Variable cutting speeds - Driven blade cleaning brush - Cooling system - Bimetal band saw blade - CE Declaration of Conformity - User manual (DTR) in Polish and English For more information, please visit our website.

Būklė: geras (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 6535, Pasiūlymas 25230 Hidraulinis dviejų kolonų valdomas juostinis pjovimo automatas Techniniai duomenys: - Automatinė pjovimo proceso eiga, hidraulinis pjovimo rėmo kėlimas/nuleidimas - Rankinis kampo reguliavimas su hidrauliniu fiksavimu - Automatinis medžiagos padavimo automatas, motorizuotas kampo reguliavimas - Juostos matmenys: 4400 x 34 x 1,1 mm Dsdpfx Aew I Scfjd Ioup - Pjovimo greitis: bepakopis reguliavimas 15–150 m/min - Pjovimo spaudimo reguliavimas: bepakopis 10–15 bar - Nusileidimo greitis: 0–300 m/min - Pjovimo sritis 90°: - Apvalus: 335 mm - Kvadratinis-plokščias: 500 x 335 mm - Medžiagos padavimo automatas: 5–2300 mm - Pavara: 400 V / 6,5 kW - Reikalinga vieta: apytiksl. Plotis 2400 x aukštis 1950 x gylis 2200 mm - Svoris: apytiksliai 1800 kg

Būklė: naujas, Gamybos metai: 2026, Semi-automatic hydraulic column band saw. A universal machine designed for series production, suitable for cutting both solid materials and profiles. The device comes standard with an automatic blade tension control module set for the desired depth, ensuring precise and straight cuts. Exceptionally large cutting capacities: 500x700 mm. Duedsizi T Ejpfx Ad Iop Machine description The CORMAK H-50/70 double-column band saw is a high-performance machine for semi-automatic cutting cycles of solid materials and profiles made from steel, cast iron, and non-ferrous metals. The double-column design provides increased rigidity during the cutting process, while the entirely different arm and blade guidance technology, compared to scissor-type machines, significantly reduces cutting time and increases accuracy. In the CORMAK H-50/70 semi-automatic band saw, once the start switch is activated, the entire cutting cycle—including hydraulic vise clamping of the material, blade movement initiation, lowering of the cutting arm (speed smoothly adjustable), machine stop at the end of the cut, arm lift (lifting height adjustable), and hydraulic vise release—takes place automatically. Manual operation is simplified to material feed against a stop. The robust arm, made from a single cast-iron piece, together with the refined, heavy, and stable frame construction, gives the CORMAK H-50/70 saw exceptional rigidity. This translates into trouble-free operation and highly precise cuts. Blade tension control ensures optimal operating conditions for the blade. In the event of blade breakage, the machine stops automatically. Blade precision is ensured by guides composed of bearings and carbide inserts. The innovative design and manufacture of the CORMAK semi-automatic and automatic saw series according to ISO:90001 and ISO:140001 standards and certifications guarantee safety, quality, and reliability. The use of motors licensed by ABB, a globally recognized and respected manufacturer and industry leader, guarantees long-term, trouble-free performance. Technical specifications TYPE: Semi-automatic ARM LIFTING AND LOWERING: Hydraulic with smooth lowering adjustment BLADE SPEED: 40/60/80 m/min VISE: Hydraulic TABLE HEIGHT: 600 mm SAW BLADE: 41x1.3x6100 mm MAIN MOTOR POWER: 5 kW TOTAL POWER: 6.5 kW DIMENSIONS (LxWxH): 3050x1150x1950 mm WEIGHT: 2400 kg Maximum cutting range [mm] Angle 0º ø500 500 × 700 Standard equipment - Front-mounted control panel - Semi-automatic cycle operation - Built-in hydraulic unit - Arm position memory function - Blade cleaning brush - Cooling system - Bimetallic blade - CE declaration of conformity - Technical and Operating Documentation