Aušinimo bakas

Primac CV.2C. 125/6

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Dsdpfx Ajvgrh Ueahecd Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press only): approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Gamybos metai: 1999, būklė: naudotas, Used Entex extruder PL-WE150, complete with control cabinet, previously used for powder coatings, in good condition. Dsdpfx Asbqt Arsahscd We can also offer you an Entex PL WE 70!

Gamybos metai: 2003, būklė: dilaminuotas dirbtuvėje (naudotas), Stock no. 2651 Dsdpfeiyyf Isx Aahjcd 1 used underwater pelletizing system, partially overhauled in 2023 Throughput up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, 4.4 kW drive By-pass system TVE 1000 ED pellet dryer with 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200 L water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further underwater pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruders.

Būklė: naujas, The solution for shredding large, long pipes and profiles. The ZRS series is specifically designed for the size reduction of pipes with diameters up to 1,300 mm made from various materials such as PE, PP, and PVC. These machines are capable of directly shredding plastic pipes up to 9 metres in length without the need for pre-cutting or sawing. At the core are rotors with diameters up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low rotational speeds. The pipe is inserted into a closed feed trough, where it is pressed against the rotor by a hydraulic pusher. The pre-shredded material is then conveyed by the shredder via a conveyor belt to a granulator. The granulator further processes the material into directly re-usable regrind. Dedpfxoghgd Ij Aahocd The entire system is operated automatically via a central control unit. Additional advantages of the system include low energy consumption, avoidance of power peaks, and minimised risk of accidents during pre-shredding.

Gamybos metai: 1996, būklė: geras (naudotas), Make: KRAUSS-MAFFEI KMD-2-50-KK Description: Used, fully functional Model: KMD-2-50-KK Output capacity: up to approx. 140-180 kg/h with H-PVC pipes, depending on material and product these values may vary Year of manufacture: 1996 Screw diameter: 50-103 mm (conical) Screw length: 1300 mm Screw speed: max. 43 m/min Drive motor: DC motor, 25 kW Barrel heating/cooling zones: 4/3 (oil cooling) Feed section heating zone: 1 Dcedpsh Nmt Djfx Aahsd Tool heating zones: 5 Equipment: Dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw temperature control Gearbox: Gearbox was installed at 53,000 h. Refurbished screws and barrel Comment: Current operating hours 62,590 h

Gamybos metai: 2010, būklė: beveik kaip naujas (naudotas), BATTENFELD PE PIPE HEAD RK 315 Spiral, screen basket with 315 PE tool Lightly used Condition: Like new The pipe head is my property Sachal Extrusion Machines Dsdpfxehy Aq Is Aahjcd Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), VACUUM CALIBRATION TANK LÜERS VT 125-1-6 Dodeiidm Tepfx Aahjcd Chamber: 1 Pipe diameter: max. 125 mm Length: 6 meters Feed: electric forward and reverse Year of manufacture: 2000 Material: stainless steel (VA)

Būklė: beveik kaip naujas (naudotas), Rostfritt stålpalllyft, Gaffelmått: (2x) 1150 mm x 160 mm Totalmått: 1600 mm x 530 mm x 1220 mm Dsdpfshlp Nfox Aahscd

Gamybos metai: 1991, veikimo valandos: 102 364 h, būklė: geras (naudotas), This extrusion line from Hans Weber GmbH is located at Plastima Used Machinery in the machine warehouse. The line was manufactured in 1991 and is in used but good condition. – Brand: Hans Weber GmbH – Model: WEBER DS 6.5 – Year of construction: 1991 Dsdpfx Aaeqpft Iehocd – Screw diameter: 65 mm – Operating hours: 2,364

Gamybos metai: 2004, būklė: geras (naudotas), 1x Rapid GK2218 (1987) 1x Rapid 1521A (1996) 1x Rapid GK205A (1989) 2x Rapid 1521A (2004) Dcodpfx Ajitvbpjahod