Laboratorinis ekstruderis

PMH GmbH EX-20-25l/d

Gamybos metai: 2020, Sąlyga: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection Bcodpfx Agsfzktzoiow The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2003, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Stock no. 2651 1 used underwater pelletizing system, partially overhauled in 2023 Throughput up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, 4.4 kW drive By-pass system TVE 1000 ED pellet dryer with 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200 L water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Bcjdpeiyyf Iefx Agisw Further underwater pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruders.

Sąlyga: naudotas, Feed opening: 1200 x 1600 mm Drive: 110 kW, without gearbox Bjdpfx Aebq Stqegijcw Rotor diameter: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen design: heavy-duty screen basket, reinforced with ribs Screen perforation: 15 mm Counter-knives: with adjustable cutting gap Machine weight: approx. 5,900 kg

Gamybos metai: 2010, veikimo valandos: 29 000 h, Sąlyga: labai geros būklės (naudotas), Kategorija: Dvigubas sraigtas ekstruderis Bedpfxjxykcgs Agiscw Numeris: DE27699 Gamintojas: Coperion - Werner & Pfleiderer Tipas: ZSK 50 MCC+ Pagaminimo metai: 2010 Sraigtų skersmuo: 2 x Ø 50,0 mm L/D santykis: 48:1 Variklis: 129 kW Išsami informacija: Taškiniai sraigtai sukasi ta pačia kryptimi, segmentuoti sraigtai ir cilindras, vakuuminis siurblys, temperatūros reguliavimo įrenginys, 2x šoninis padavimas, 1x šoninis dujų pašalinimas. Ekstruderis yra labai geros būklės, dirbo tik 29 000 valandų. Papildomos opcijos: 7 padavimų Motan Colortronic dozatorius, džiovintuvas (Motan LA 1200/4), IPS gijų ištraukimo sistema, gijų transportavimo juosta, vandens vonia, granuliatorius, vibruojantis sietas – galima įsigyti iš karto už papildomą kainą. Šis pasiūlymas neatitinka Jūsų poreikių? Aplankykite mūsų Plama svetainę arba atsiųskite mums detalią užklausą – turime įvairių sprendimų bet kokiam biudžetui.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Distance between mounting plates: 350-500 mm Bedpsuykh Dofx Agijcw Tie bar spacing: 221 mm Mould mounting platens (W x H): 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Screw stroke: 100 mm Injection volume: 70 cm³ Shot weight: 59 g Injection pressure: 1040 bar Operating hours: 34,748

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, - Single-screw extruder - 25/25 L/D screw - Motor: 2.2 kW - Adaptor for flat die 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / take-off unit - Control system Bodsrg Ebcopfx Agiscw

Sąlyga: labai geros būklės (naudotas), Boy 80M Year of manufacture: 1998 Clamping force: 80 tons Screw diameter: 36 mm Shot weight: 132 g Tie bar distance: 410 x 358 mm Bedpfx Aemt Hh Esgijcw

Sąlyga: geras (naudotas), Gamybos metai: 2007, veikimo valandos: 24 210 h, This injection moulding machine from Dr. Boy is currently stored at Plastima Used Machinery’s warehouse. The machine was manufactured in 2007 and has relatively low operating hours for its age. – Brand: Dr. Boy – Model: 55M – Year of manufacture: 2007 – Screw diameter: 32 mm – Shot volume: 96.5 cm³ Bcedpfx Aotpf N Uogisw – Clamping force: 55T – Operating hours: 24,210

Gamybos metai: 2024, Sąlyga: naujas, oris- Extruder MINI ESE 20/25 D Technical Data Screw Diameter [mm]: 20 Screw Length [L/D]: 25 Screw Speed [rpm]: 20-200 rpm Screw Axial Pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency converter Drive Power [kW]: max. 2.5 Reduction Gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590 *) Electrical Connection Values: 3 / N / PE Supply Voltage [V]: 400 at 50 Hz Bedpfohx Elfsx Agiscw Control Voltage [V]: 230 Temperature Control: Electric mica resistance heating bands Max. Processing Temperature [°C]: 300 Control Cabinet and Control Panel The electrical installation of the extruder is located in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; the water connection must be provided by the customer. A chiller unit for cooling the water is not included in the offer. Extruder tooling is not included in the scope of supply.

Sąlyga: naujas, Gamybos metai: 2024, mašinos/transporto priemonės numeris: 302340, Ring bending machine Manufacturer: KB Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Bending capacity: Round tube up to 48 x 3.0 mm Flat bar (upright) 50 x 10 mm Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3 phase. Bsdpfx Aod S Uf Segijcw