Ekscentrinis presas

PME PE 80 C

Gamybos metai: 1990, Sąlyga: naudotas, Pressure: 75 t Throat depth: 300 mm Stroke: 8 - 110 mm Table size: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Passage opening in table: 250 x 150 mm Ram bore: 40 mm Strokes per minute: 60 + 90 spm Chsdpfx Aed Nl E Uodmsf Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram at bottom stroke, ram down: 19 mm Distance table/ram at top stroke, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for attaching tool change consoles - 2 roller rails in table - mechanical overload in ram (shear plate) The following work will be carried out on the machine / partial refurbishment: - Machine will be completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine will be repainted - New Balluff cam switchgear - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication - New control cabinet with touch panel and ABB safety control - Current safety inspection (German UVV) including brake time measurement

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Parts Cleaning Machine / Spray Cleaning System Type L102 Automatically operating hot water parts washer with basket drive via gear motor, 2 stainless steel wash pumps (manufacturer: Lowara), 2 rotating three-sided spray systems. - Basket diameter: 910 mm - Usable height: 520 mm - Maximum load weight: 200 kg Chedpfohymmgsx Admof - Spray pressure: 2x 3 bar - Tank capacity: 175 liters - Heating: electrically adjustable (room temperature - 90°C) System dimensions (LxWxH): 1,300 x 1,250 x 1,990h mm Empty weight: approx. 300 kg Washing timer freely adjustable (minutes and hours) Complete cleaning machine (internal and external casing) made of stainless steel 1.4301 Water circuit and loading basket made of stainless steel 1.4301 Bath cover with fine filter (2,000 micron) 2 intake filters for pump protection Steam extraction including condensate return This is a demonstration unit from the Glogar Technology Center.

Sąlyga: naujas, New electric scrubber dryer, floor cleaning machine KREMER model KR-FL50A Year of manufacture: 2024 Theoretical area coverage: 2,000 m²/h Working width: 510 mm Cleaning brush: Ø 510 mm Brush speed: 175 rpm Squeegee width: 850 mm Fresh water tank capacity: 50 litres Dirty water tank capacity: 50 litres Noise level: 66 dBA Cedpfevvww Tjx Admshf Climbing ability: 2% Battery voltage: 24 Volt, 100 Ah - Battery charger 24 Volt - Battery 24 Volt, 100 Ah - One cleaning brush - Two separate tanks - No traction drive, the machine is manually pushed Machine length: 1,200 mm Machine width: 510 mm Squeegee width: 850 mm Machine height: 1,350 mm Unladen weight: 160 kg Good condition

Sąlyga: naujas, Gamybos metai: 2025, The ERBA EVP-RA 550 vibratory finishing machine features a flat process bowl base with integrated separation, specifically designed for processing medium to large workpieces. It is equipped with an easily replaceable screening unit. Emptying and separation are carried out via the integrated flap (manual/pneumatic operation). For increased load capacities, reinforced suspension and a more powerful motor can be installed upon request. The motor speed can be continuously adjusted using a frequency converter (optional). The EVP-A 550 can be linked with other machines due to its side discharge configuration. The system can be equipped with fully automated PLC control (optional). ERBA vibratory finishing systems are characterized by their durability and longevity, supported by the hot-cast polyurethane lining of the process bowl. Technical data: - Gross volume: 550 L - Process channel width: 390 mm - Imbalance motor output: 4.0 kW - Rotational speed: 1,400 rpm - Inner diameter of the bowl: 1,400 mm Chedpfxsn Ut Uge Admjf All prices are net, subject to the statutory VAT applicable at the time of purchase, and plus shipping costs. The images may show the system including accessories, which are optionally available and subject to additional charges. If you are interested, we look forward to hearing from you. Our consultation is non-binding and at your disposal. The European Commission provides a platform for online dispute resolution (ODR). This offer serves exclusively as an online presentation of our products. Contract negotiations take place via telecommunications (e-mail, telephone, messaging portal). Our initial offer is non-binding and will include our general terms and conditions with company information and cancellation policy before any purchase/contract conclusion takes place.

Gamybos metai: 1971, Sąlyga: geras (naudotas), Decoiler – Expanding Mandrel Decoiler with Coil Lifting Table Chedpfod Ha E Sex Admsf Strip Width: 1,200 mm Strip Thickness: 0.3 – 5 mm Coil Weight: 10 t Mandrel Ø: 508 mm

Sąlyga: naudotas, Gamybos metai: 2008, Biesse Rover A 3.40 FT - NBC 412 Automatisierte Nestingzelle Beschreibung: Rover A 3.40 FT Zentralisiertes automatisches Schmiersystem 8 vordere Anschläge + 8 hintere Anschläge jeweils mit Sensoren 1 rechter Seitenanschlag mit Sensor Vakuumsystem für zwei Pumpen mit je 300 m³/h Förderleistung Chsdpowh Sfzjfx Admef 12 kW (16,1 PS) Elektromotorspindel, ISO 30 Aufnahme, luftgekühlt Blaseinheit Bohrkopf BH 18 A Revolver-Werkzeugwechsler mit 10 Positionen Numerische Steuerung XP600 BiesseWorks - Advanced - Maschinen- und Büroversion BIESSE NEST Modul Beladungs- und Entladearm, am Maschinenbalken positioniert Be- und Entladetisch, an der linken Seite des Bearbeitungszentrums positioniert CE-Sicherheitsvorrichtungen Drehklauen-Vakuumpumpe Mechanischer Niederhalter mit pneumatischer Absenkung für Nesting-Anwendungen (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1968, Equipment: 1 gripper feeder on the right 1 eccentric press 90 kN 2 narrow slide units Csdpjl D N Hvefx Admohf 4 standard slide units Working range: Wire diameter range: 0.5 - 3.5 mm Strip width: max. 32 mm Feed length: max. 170 mm Capacity: max. 250 cycles/min

Gamybos metai: 2002, Sąlyga: naudotas, Press pressure: 63 t Throat depth: 315 mm Stroke: 8–100 mm Strokes per minute: 140 spm Ram adjustment: 63 mm Table area: 1200 x 630 mm Ram area: 800 x 315 mm Through-hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight approx.: 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation Roller block rails in table Hydraulic tensioner on ram Counterbalance cylinder Chedpfx Aslp U D Tjdmsf Approved for manual loading and unloading

Sąlyga: naudotas, Sheet width: 250 mm Coil outer diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: Expanding range mm Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Space requirement: approx. (specify dimensions) Codofn Aqmjpfx Admshf Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Unbraked decoiler with pressure roller Straightening machine MR 250/4: Strip entry height: 1250 mm The system has been dismantled, inspected, and freshly repainted.

Gamybos metai: 1980, Sąlyga: naudotas, Pressure: 80 t Chedpfedlcy Hox Admef Outreach: – mm Stroke: 50 mm Table surface: 875 x 695 mm Ram surface: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30 – 90 Gap width: 450 mm Machine weight approx. 6.2 t Space requirement approx. 2.0 x 2.1 x 3.2 m Installation height (stroke down, ram adjustment up): 480 mm Further information: - The machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen, including wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine is safe for manual loading operation at open tools. Before delivery, a current UVV safety inspection and brake time measurement will be carried out.