VALYMO MAŠINA + Šlifavimo mašina

PIZZIGALLI GP 11

Sąlyga: naudotas, A.COSTA LEOPARD Multiblatt-Auftrennsäge mit Doppelwelle - Maximale Schnitttiefe: 200 mm - Breite des Förderbands: 350 mm - 2 x 55 kW / 75 PS - Gewicht: ca. 5 Tonnen Lsdpfjvf Dagsx Af Ierg

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2024/121/47, pjūklo disko skersmuo: 420 mm, GRAULE Crosscut and Mitre Circular Saw Model ZS 170 N (tiltable) 400 Volt three-phase brake motor, 2.2 kW Saw blade diameter: 420 mm Blade bore: 40 mm Cutting height: 170 mm Blade tilted to 45°: cutting height 115 mm, cutting length 410 mm Lsdpfx Afstwz Tlo Ierg Including the following accessories: 1 pc. machine, tiltable on both sides via hand crank from the rear, from 90° to 45° left and approx. 30° to about 60° right 1 pc. HM circular saw blade 420x3.4/2.4x30 mm, 48 teeth, negative rake, for wood 1 pc. machine stand

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING Lodpsrmucxjfx Af Ierg PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Sąlyga: naudotas, Gamybos metai: 1980, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: KME 2/750L, Clamping carriage for saw frame Ledpfjv Umb Ejx Af Iorg Inspection by appointment is gladly possible.

Gamybos metai: 2009, veikimo valandos: 214 h, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Thin-cut frame saw DSG Sonic – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical data: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of frame strokes: approx. 550/min Lrjdpsw Dp Ufofx Af Ijg Cutting heights for different saw lengths: Saw length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) Saw length 420 mm → cutting height: 30–128 mm, 45–128 mm Saw length 500 mm → cutting height: 80–210 mm, 45–210 mm Saw length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For standard machine: +185 mm With magazine: 250–1700 mm With double planer: +250 mm Block height difference: ±0.5 mm Cutting width for side fence: 140 mm 🔹 Additional technical data: Cutting width for central fence: 2 × up to 60 mm Optional groove width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss per cut (kerf thickness): from 0.9 mm Saw blade service life (depending on wood): ~40 hours Machine weight: - Basic: 3000 kg 🔉 Noise levels (hearing protection required): At the machine (1 m): - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator’s workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and air system: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3200 m³/h (30 m/s) Working air: - Min. 6 bar - Consumption: 200 l/min Lubrication: Central, with guide monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Supply cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Sąlyga: naujas, Gamybos metai: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable Brush lift height: 25 mm with pneumatic damping 1st brush: Metal brush, diameter 220 mm 2nd brush: Tynex brush, grit 80, diameter 220 mm Reversible direction: for both brushes Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW Feed motor power: 0.37 kW Machine length: 1400 mm Lodpfx Afsi Ezrzj Ijrg Machine width: 900 mm Weight: 500 kg

Sąlyga: naujas, Gamybos metai: 2023, Demonstracinis įrenginys Pagaminimo metai: 2023 Įranga ir techniniai duomenys: Pagrindinė mašina 1057 XL C su Beckhoff liečiamu ekranu valdymui Ištraukiama ruošinio atrama 600 mm Įleidimo liniuotė ilga 1252 mm Dviejų variklių sujungimo frezavimo agregatas DIA sujungimo freza 70 x 64 x 30 mm Z2+2 su kairine ir dešine eiga Krašto padavimo sistema 1903 visiškai automatinė Glujet 301 klijų užnešimo sistema Automatinė papildymo funkcija Lrsdpfow I Uytjx Af Ieg Talpykla 1,4 kg klijų patronams (4 patronai) GluJet surinkimo bakelis Spaustuvas 1912-3 pneumatinis Purškimo įrenginys GM 201 už spaustuvo Atpjovimo agregatas 1918 pneumatinis Ištraukimo gaubtai atpjovimo agregatui Kombinuotas frezavimo agregatas FR201 su DIA frezomis R=2 mm Forminis frezavimo agregatas 1832 Lentynų programos funkcija Radiusinė traukimo mentelė ZK 301 Lustų surinkimo dėžė Paviršiaus traukimo mentelė FK 701 Purškimo įrenginiai priekyje ir gale TR201 Poliravimo agregatas 1940 Vieta: Zolingenas Prieinamumas: trumpuoju laikotarpiu

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Celaschi panel saw 4+4 motors Lrsdpfx Afovx Afno Isg Opening width 3000 mm Option for complete overhaul available

Sąlyga: labai geros būklės (naudotas), Independent machine - Universal machine (First & Second in a machine line) Electronic control – EasyLing programmer Safe and soundproof casing No. 3+3 vertical columns to support the working units Min. useful working width (mm): 240 Max. useful working width (mm): 3,100 Min. useful working thickness (mm): 3 Max. useful working thickness (mm): 150 Retractable positioning cams, spacing (mm): 800 Feed rate (min/max), stepless adjustment (m/min): 4 – 24 Total power Lrjdpfewhmdfjx Af Iog No. 4 machining groups (for each side of the machine): Scoring unit Automatic scoring unit 1 x 3 kW (6,000 RPM) Planing unit 1 x 6 kW (6,000 RPM) 0–10° Universal milling unit (electropneumatically controlled) 1 x 6 kW (6,000 RPM) 0°–90° Universal milling unit 1 x 6 kW (6,000 RPM) 0°–90°

Sąlyga: naudotas, No. 3231 Extraction System with Briquetting Press Spänex SHB 50 Used Complete disposal system for residues from wood, paper, plastics, cotton, etc. The sawdust is conveyed directly from the filter unit into the chip bunker of the hydraulic briquetting press. After compaction, the briquettes are transported directly to the heating system. Technical data according to manufacturer brochure: Capacity: 50 kg/h (material-dependent) Throughput: 0.45 m³/h Briquette shape: octagonal, 125 x 70 mm Motor power: 5.5 kW Compression ratio: 1:10 Moisture content: min. 8%, max. 20% Sale on behalf of customer, ex location near 69124 Heidelberg, without dismantling, transport or installation Dismantling, loading, and transport by us available as an option Errors in description and price excepted To avoid potential misunderstandings, on-site inspections are possible and recommended by prior appointment Sale as is Technical specifications, condition description, year of manufacture and scope of delivery as per manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is provided on used machines; the goods are sold as seen Pictures and videos serve as examples and do not represent the actual scope of delivery Payment terms: prices plus statutory VAT, payment prior to collection or dispatch Lredpfowqhwljx Af Isg Delivery terms: ex location