2019 m. PIOVAN temperatūros valdymo blokas THW124-F

PIOVAN THW124-F

Gamybos metai: 2020, Sąlyga: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Ffsdpjfzktzofx Ab Set Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 – RC300 Robot TECHNICAL DATA: Injection Unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticising capacity (3-zone screw): 222.9 g/s Plasticising capacity (barrier screw): 279.2 g/s Injection performance: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Max pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (including nozzle): 8 Heating power: 88.5 kW Clamping Unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Fedsw Aw Tajpfx Ab Seft Max. platen distance: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (H x V): 2,000 x 1,600 mm Platen size (H x V): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2 x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector Unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and cooling: Installed main motors power: 265 kW Oil tank capacity: 1,600 l Max. oil cooling power (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 – RC300 Robot (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – control via machine panel Machine in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, household appliances, technical parts). Machine is under power, test run possible. AVAILABLE IMMEDIATELY For further information, please contact us – we can provide additional photos, a working video, technical documentation, and arrange a convenient appointment for inspection.

Sąlyga: naudotas, Gamybos metai: 1989, veikimo valandos: 74 900 h, spaudimo jėga: 850 kN, varžto skersmuo: 40 mm, bendras svoris: 3 700 kg, Machine No. 145464 Year of manufacture: 1989 Machine weight: 3,700 kg (without oil filling) Clamping force: 850 kN Heating capacity: 8.31 kW Motor: 18.5 kW Total power: 27.2 kW Fedpfxor Hrqrs Ab Soft Machine cycles: 7,112,306 Operating hours: 74,900 h Interfaces: Host computer, handling, air blast, sorting gate, hydraulic core pull 1, mold temperature control 3 zones. The following accessories etc. are included with the machine: Complete 50 mm thermoplastic injection unit, sorting gate, hydraulic infeed conveyor (height-adjustable in 3 steps, integrated into the control), external disk drive (Arburg original), documentation and machine service reports from Arburg, machine setup course documentation (folder), electrical schematic, documents also available in digital form, oil filling (must be pumped into a container prior to transport—pump is included), electronic water manifold.

Gamybos metai: 2005, Sąlyga: paruoštas naudoti (naudotas), Galimi du BOY 55M, pagaminimo metai 2005. Užveržimo jėga: 550 kN, sraigto skersmuo: 38 mm, judesio tūris: 196 cm³, įpurškimo slėgis: 2000 bar, plokščių matmenys: 565 mm / 540 mm, tarpų tarp juostų: 360 mm / 335 mm. Detalės aukštis min./maks.: 250 mm / 650 mm, atidarymo eiga: 400 mm, maks. plokščių atstumas: 1050 mm, išstumtuvo eiga: 80 mm, maks. įrankio svoris: 600 kg. Matmenys X/Y/Z: apie 3300 mm / 1200 mm / 2100 mm, svoris: apie 2300 kg, darbo valandos: 29 664 h, valdymas: Procan MD. Įskaitant roboto sąsają Euromap 12. Fsdpfstyaypsx Ab Ssft

Gamybos metai: 2026, Sąlyga: naujas, mašinos/transporto priemonės numeris: 1234, Used for collecting mash prior to the packaging process. With the buffer option, the entire system can operate continuously and independently of the packaging machine, without interruption. - Capacity: 600 L - Material: Wnr. 1.4301, AISI 304 stainless steel - Weight: 80 kg - With floating lid - Fill level indicator Ffedsiu Hy Tspfx Ab Sot Dimensions: D - Diameter: 565 mm H - Total height: 1095 mm h1 - Tank height without legs: 845 mm h2 - Leg height: 250 mm

Sąlyga: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 191523, spaudimo jėga: 490 kN, varžto skersmuo: 30 mm, -KOM 3086- Offered here is a used injection moulding machine. Technical specifications: Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2013 Machine No.: 191523 Fjdpov Tb U Dofx Ab Seft Screw diameter: 30 mm Tie bar spacing: Tie-barless Location ring diameter: 125 mm

Sąlyga: geras (naudotas), Gamybos metai: 2007, veikimo valandos: 24 210 h, This injection moulding machine from Dr. Boy is currently stored at Plastima Used Machinery’s warehouse. The machine was manufactured in 2007 and has relatively low operating hours for its age. Ffodotpf N Uepfx Ab Sjt – Brand: Dr. Boy – Model: 55M – Year of manufacture: 2007 – Screw diameter: 32 mm – Shot volume: 96.5 cm³ – Clamping force: 55T – Operating hours: 24,210

Gamybos metai: 2014, Sąlyga: paruoštas naudoti (naudotas), Max. output capacity: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic feed system, frame structure, level valve, inspection chamber, and documentation. Fodjh Akm Topfx Ab Soft

Sąlyga: naudotas, Gamybos metai: 2019, Year: 2017 Control type: CC300 Operating hours: 20,000 h Storage location: MECA PLASTIC Availability: AVAILABLE Clamping force: 160 t Opening stroke: 460 mm Tie bar spacing: 520 mm x 520 mm Platen dimensions: 760 mm x 760 mm Ffodpfev I Uw Isx Ab Sst Minimum/maximum mould height: 250/600 mm Maximum daylight between platens: 1,060 mm Screw diameter: 35 mm Screw length: 20D Shot volume: 154 cm³ Injection pressure: 2,000 bar Motor power: 21 kW Heating power: 9.2 kW Clamping unit weight: 8.4 t Overall length: 5.90 m Overall width: 1.70 m Overall height: 2.20 m Core pull: NO Robot interface: YES Bimetallic screw: YES

Gamybos metai: 2003, Sąlyga: labai geros būklės (naudotas), 7x Stück MOTAN Materialbehälter für Trockner, 200 Liter, mit Heizgeräten, Baujahr ca. 2003. Die Behälter verfügen über eine eigene Temperaturregelung. Insgesamt sind 8 Stück vorhanden, verfügbar sind 7 Stück. Fedpfefwx Ebsx Ab Seft