Optinis separatorius

PICVISA ECOPACK EP-2000

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Conveyor belt length: approx. 28 m Discharge height: approx. 10 m Feed hopper approx. 10 m³ with adjustable dosing conveyor belt 2 transport conveyors (one of which is flexible) Iodev Scaxjpfx Abvjat on a 3-axle chassis Powered by ENDRESS generator set, 45 kVA,

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. Iedpfx Abovf E Aveveat The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), įėjimo įtampa: 400 V, Konténersajtó Husmann, nagy adagolónyílással Ijdpfx Aswampfebvoat

Būklė: paruoštas naudoti (naudotas), Būgninis sietas Terra Select. 50 mm sietelio skylės. Iajdpfx Absvnmcvovot

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 6 000 h, mašinos/transporto priemonės numeris: 006424, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, garantijos trukmė: 3 mėnesiai, galia: 75 kW (101,97 AG), Įranga: dokumentacija / vadovas, This very recent baler is being offered by Bollegraaf Recycling Solutions. It concerns a HBC100 baler (75kW) equipped with, among others, cross-tying and FULL HARDOX wear plate lining, and a Bollegraaf chain conveyor with Bordoflex protection. Both the chain conveyor and the baler are fitted with all available options for optimal efficiency in baling all types of plastics. Everything was manufactured in 2022 and has very low operating hours. The previous owner has purchased a new Bollegraaf installation and traded in these machines. Following dismantling, this baler will be sold including a 3-month warranty. Baler HBC100K (75kW): - Pressing force: 390 mm press ram height - Intermediary feed hopper - Conveyor feed chute Iaodpfxoxvh Ewo Abvjt - Working platform with cage ladder - Additional photocells - Frequency inverter for main motor for energy savings - APCP (adaptive self-learning channel pressure control for consistently optimal bale weights) - Cross-tying (3 horizontal and 5 vertical wires) - Full Hardox interior lining in the baler chamber - Bale exit - Hydraulic lifting mechanism for both knotter units for improved accessibility/maintenance - Bale length display - Air conditioning on control cabinet - Frequency inverter for conveyor chain - Hydraulic oil heater - Hydraulic unit oil cooler - 4G modem for remote support Chain Conveyor Bollegraaf HBT 1200/1800*20400: - Equipped with Bordoflex for extra chain protection - Discharge plate for debris - Supports - Chain lubrication system

Gamybos metai: 2011, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Rūšiavimo rentgeno spinduliais mašina. Iasdpfxoyy A Uwo Abvet Gamintojas: TITECH TOMRA Tipas: X-TRACT 1200 Mašina TOBULOS DARBO BŪKLĖS. Atliktas pilnas mašinos kapitalinis remontas. Šaltinis pakeistas: 35 000 € Visi jutikliai pakeisti: 29 000 € Diržas pakeistas: 10 000 € Pritaikymas: - bromuotų plastikų rūšiavimas D3E sraute - metalų rūšiavimas - medienos, stiklo, PVC rūšiavimas CSR gamybai - organinių atliekų rūšiavimas

Būklė: naujas, WAŁY DEDYKOWANE DO HAMMEL VB 850. DOSTĘPNE TAKŻE Z GRZEBIENIAMI BOCZNYMI PROTECHNIKA to firma z 21-letnią historią, która od początku swojej działalności zajmuje się produkcją części zamiennych oraz kompletnych linii do recyklingu. W ostatnich latach rozszerzyliśmy naszą ofertę o produkcję wałów rozdrabniających do wolnoobrotowych rozdrabniaczy. Dzięki wdrożeniu automatycznych procesów spawania oraz własnej technologii produkcji zminimalizowaliśmy czas realizacji, przy jednoczesnym zachowaniu wysokiej i powtarzalnej jakości. Wały rozdrabniające są produktem seryjnym, co m.in. umożliwia nam współpracę z producentami maszyn jako dostawca OEM. Co wyróżnia PROTECHNIKA na tle konkurencji? To proste! - Materiały z certyfikatem 3.1 - Jakość TUV SUD Rheinland Iasdpfsx Hhfzox Abvst - ISO 9001 - Zautomatyzowany proces spawania / ISO 15613 / ISO 15614 - Uprawnienia spawalnicze ISO 9606-1 - ISO 9001:2015 - ISO 14001 - Własne niezależne biuro konstrukcyjne, realizujące indywidualne wymagania klienta - Własne CENTRUM BADAWCZO-ROZWOJOWE Relacje z klientami są dla nas najwyższą wartością, ponieważ ich satysfakcja jest naszym sukcesem!

Būklė: labai geros būklės (naudotas), Techninė būklė: labai gera Išorinė būklė: labai gera Iasdpjt Dltbjfx Abvet Norėdami gauti daugiau informacijos, susisiekite su Ferdinand Pater.

Būklė: geras (naudotas), For sale: Solid German industrial washing machine from the renowned brand Miele, model WS 5141 EL. Designed for heavy-duty use in commercial laundries, hotels, hospitals, or production facilities. Equipped with an automatic detergent dosing system and a high-performance 15 kW heating unit. - Technical specifications: • Model: Miele WS 5141 EL • Type: Free-standing industrial washing machine • Power supply: 3N~ 380–415V / 50–60Hz • Heating power: 15 kW • Power consumption: 15.4 kW • Drum capacity: up to 14 kg • Spin speed: up to 1,000 rpm • Drum: Ø 590 mm x 512 mm • Weight: approx. 380 kg • Electronic control unit with programmer and automatic dosing Iaodpfx Ajw Hhvmjbvot • Protection class: IP X4 • PC/programming interface - Technical condition: • Fully operational • Ready for connection – complete • Dosing system requires replenishing container no. 2 (notification visible on display) • Inspection valid until 2025 (Miele service sticker) • Removed from service from an industrial line - Applications: Ideal for: • Commercial laundries • Industrial facilities • Care homes / hospitals • Hotels and guesthouses • Cleaning companies - Why is it worth it? Premium-class machine, German-made – extremely durable construction, perfect for intensive operation. Instead of investing 20,000–25,000 PLN (net) in a new one – save a significant amount while retaining Miele quality and reliability. - Included: • Miele WS 5141 EL washing machine • Cabinet with dosing installation (visible in photos) • All connection cables

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, TRI OPTIQUE Gamintojas: PELLENC Tipas: M 2800 BB HR Darbinis plotis: 2 800 mm Iasdpfx Ajyy Aa Tsbvjt 2024 m. birželio mėn. sumontuota opcija: visų tipų metalų, įskaitant nerūdijantį plieną (INOX), separatorius. Naujas transporterio juosta. Mašina gali išskirti visų rūšių plastiką pagal kokybę, visus metalus, įskaitant nerūdijantį plieną, bei medieną. Mašina ką tik peržiūrėta. Pateikimo sistema: Gamintojas: SINEX Tipas: MU 75 6500 Galia: 2 x 3 kW Išėjimo konvejeris 1: Gamintojas: RMIS Išėjimo konvejeris 2: Gamintojas: ARVAL