Kopijavimo šlifavimo staklės

PeTeWe GmbH PFS 30-CNC

Gamybos metai: 1985, Sąlyga: naudotas, Workpiece diameter: 25–90 mm Thread length: 3,000 mm Thread pitch: 2–16 mm Total power requirement: 25 kW Machine weight approx.: 10.5 t Space requirement approx.: m O F F E R We can offer you the following, subject to prior sale and errors excepted, ex stock without obligation. WALDRICH COBURG Whirling machine / peeling machine for the production of threads, worms, ball screws or similar components Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 – 90 mm Max. thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Pitch angle max. up to Ø 55 mm: 15° Pitch angle max. descending up to Ø 90 mm: 8° Whirling head speed, stepless: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore diameter of clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive approx.: 25 kW – 380 V – 50 Hz Weight: approx. 10,500 kg Accessories / special features: • Robust whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests, integrated with prism guides. Manual thread depth adjustment and optical pitch angle setting on the support. • Powered tool head, normally equipped with 4 tools: 2 roughing tools, 1 flank tool, 1 deburring tool. • Workpiece speeds and pitch feed are finely adjustable using change gears. Separate rapid traverse for resetting the whirling slide. • Simple indexing unit for whirling multi-start threads. • Additional setup for whirling threads longer than the centre distance with intermediate support. • For correcting lead-screw errors, thermal expansion of the workpiece, or errors during additional setups, the machine is equipped with a compensation device. This enables both an electronically programmed compensation of the lead-screw as well as workpiece-specific linear compensation using a wedge system. • Motorized tailstock adjustment with automatic stop by contact pressure sensor. • Comprehensive accessories including cutting tools, toolholders, collets, accessory parts, setting devices, gauges, and operating tools. • Central lubrication, coolant system, separate control cabinet, operating manuals. Lhodstzdyzjpfx Abrjc The machine is suitable for roughing and finishing of single and multi-start right- and left-hand threads, worms, ball screws or similar workpieces!

Sąlyga: naudotas, ----- Lhjdpfjv Armcex Abroc Description: General: Year of manufacture: 2020 Control: WEISS CNC Centre distance: 6 mm Centre height: 200 mm Grinding wheel dimensions: 400 x 60 mm + 0 x 60 mm Workpiece spindle head: Speed: 1 rpm Max. workpiece weight: 25 kg Max. grinding diameter: 390 mm Mount: MK4 Grinding spindle head: Peripheral speed: 2 m/s Grinding wheel dimension right: 0 x 60 mm Grinding wheel dimension left: 400 x 60 mm X-axis: 380 mm Z-axis: 1.1 mm B-axis: Torque motor, stepless Tailstock: Quill diameter: mm Quill stroke: 45 mm Mount: MK 4 Micrometer adjustment: +/- 0.04 mm Equipment / Accessories: Measuring systems: Direct (glass scales) Grinding spindles: 2x grinding spindle (left/right) GAP / Crash Control: Structure-borne sound (Sensotronic) Balancing: MPM balancing device Workpiece measurement: Marposs PF ME Automation: Robot interface prepared Setup operation: Electronic handwheel Emulsion mist extractor: Mechanical Dresser: For external grinding wheel left/right Accessories: Various grinding wheels + flanges

Sąlyga: naudotas, Gamybos metai: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Maximum clearance between columns: 3,000 mm Maximum clearance height: 1,950 mm Maximum distance from spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Main spindle speed range: up to 18,000 rpm Main spindle drive power: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Type P 8002320/00-4 Main spindle speed range: 20 - 5,000 rpm Main spindle drive power: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Lhedpfx Abovy Ihdsroc Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Table clamping surface: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool positions: 327 pcs. Number of tool positions HSK A63: 156 pcs. Number of tool positions HSK A100: 171 pcs. Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total connected load: 150 kVA Space requirement approx. 25.0 x 12.0 x 7.0 m 5-Axis Gantry Large Machining Center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools subject to agreement

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, X ašies eiga: 2 400 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 810 mm, CNC HEIDENHAIN iTNC 530 X/Y/Z travel: 2,400/1,500/810 mm Retrofitted 4th axis 12,000 rpm, 40 kVA, traverse paths Weight: 7,800 kg Table with vacuum plate Including BORNEMANN 960 extraction system Lhedpfxsq Rcu Ej Abrjc

Gamybos metai: 2006, Sąlyga: geras (naudotas), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Inspected and tested, Ledpfxsdtr A Te Abrshc

Sąlyga: naudotas, Gamybos metai: 2014, Workpiece length: 100 mm Swing diameter: 80 mm Number of spindles: 2 Lhedpsvx Uvfofx Abrjc Control: FANUC 31i-B5 Workpiece weight: 2.00 kg Center height: 170 mm Grinding wheel diameter: 100 mm Grinding wheel bore: 32 mm Maximum grinding wheel width: 20 mm Maximum peripheral speed: 125 m/sec Steady rest pass-through: 45 - 60 mm Total connected load: 75.00 kW Machine weight approx.: 25.00 t Space requirement approx.: 5.00 x 3.50 x H3.50 m Camshaft grinding machine for cam components. With FANUC 31i-B5 control for non-circular grinding; loading gantry; CO₂ fire extinguisher system; for CBN grinding wheel; tailstock; steady rest; diamond roll dresser for grinding wheel mounted on the dressing spindle; grinding spindle head variant 12 (two grinding spindles can be moved independently)

Sąlyga: labai geros būklės (naudotas), Perfekt erhaltene sechsspindlige INDEX MS 25 Mehrspindel-Drehautomat mit sechs Quer- und sechs Längswerkzeugführungen. Lhedpfx Asqhkukebrec Der Preis ist verhandelbar und abhängig von der gewählten Zusatzausstattung: Spannzangen, Werkzeugen, Späneförderer usw. Die Maschine befindet sich noch im Produktionseinsatz. Besichtigung nach Absprache möglich.

Sąlyga: geras (naudotas), Traypacker / wrap-around-verpakker Trays en wrap-around dozen minimale verpakkingsafmeting L x B x H = 190 x 140 x 80 mm maximale verpakkingsafmeting L x B x H = 460 x 350 x 250 mm 4-banen machine. Hotmelt-installatie geheel gereviseerd in 2018, Siemens S7 PLC-besturing, eenvoudig formaatwissel. In huidige staat of Aangepast aan klantwens. Lhedofxypijpfx Abrsc

Sąlyga: naudotas, Gamybos metai: 1994, Technical Details: Number of spindles: 8 Spindle bore: 32 mm Ledpfx Abel Su Rxorshc Item: cam-controlled multi-spindle automatic lathe Brand: Schütte Model: AF32 S DNT Year of manufacture: 1994 Eight-spindle automatic lathe with 8 main spindles Max. nominal through-bore D=32mm Control: Siemens SIMATIC S7 electronic cam switchgear Balluff Gripper at station 8 for rear-side machining CNC cross-slide at position 6 CNC cross-slide at position 7 Workpiece conveyor belt Coolant system Schimpke Chip conveyor with magnetic separator Thread-cutting clutches Displayed tool equipment may differ from delivery scope! Please contact us for further information and images via mail(at) or *

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), Schütte AG20 multi-spindle automatic lathe Lsdpshrihyjfx Abrehc