Agregatas

Perkins 404-22TG - 28 kVA Generator - DPX-19801.1

Sąlyga: naujas, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 – 110 m/min Total power requirement: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy - Mitre cuts left 60° and right 45° - Material height sensor (automatic cut start detection) - One-piece cast frame and gearbox; exceptionally quiet and low-vibration cutting - Hydraulic vice, laterally adjustable - Guided, high-quality industrial bearings - Robust vice and machine casting - Large machine bed - Machine base with tool compartment and chip drawer - Cut monitoring via ammeter - Feed pressure regulator - Support roller (material infeed side) - Ball-bearing rotary table Ksdpfsfgyh Ujx Ahwjnd Semi-automatic operation: 1. Clamp material 2. Start saw 3. Fast lowering to material edge, or for series cutting, cut immediately 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Sąlyga: naujas, Cutting diameter: 240 mm Saw blade dimensions: 2730 x 27 x 0.9 mm Table height: 920 mm Cutting speed: 35 + 70 m/min Cutting capacity at 90° round: 240 mm Cutting capacity at 90° square: 230 mm Cutting capacity at 90° rectangle: 270 x 230 mm Cutting capacity at 45° round: 210 mm Cutting capacity at 45° square: 200 mm Cutting capacity at 45° rectangle: 200 x 210 mm Cutting capacity at 60° round: 130 mm Cutting capacity at 60° square: 130 mm Cutting capacity at 60° flat: 130 x 160 mm Total power requirement: 1.2 kW Keded Iip Sspfx Ahwsnd Machine weight: approx. 0.26 t Space requirement: approx. 0.9 x 1.6 x 1.74 m • Mitre cut left 60° • Quick-action vice with quick-clamping device • Quick-release lever for easy operation • Frame and gearbox cast in one piece, very quiet cut and low vibration • Electronic monitoring of blade tension and blade breakage, saw blade cover • Carbide saw blade guides • Large machine bed • Machine base (supplied disassembled) with automatic coolant system The AutoCut system consists of: Hydraulic cylinder, feed control, spring package, limit switch Automatic saw frame lowering via the hydraulic cylinder, infinitely adjustable feed, with limit switch at the end of the cut. Rapid traverse lowering of the saw frame from rest position to the workpiece, then switching to normal sawing feed (e.g. for scribing). Manual operation: The hydraulic cylinder acts as a brake cylinder (e.g. for notching). The brake cylinder allows the saw to be positioned at any point during the return stroke.

Sąlyga: naujas, Table height: 650 - 1050 mm Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm Table width: 1230 mm Table length: 2480 mm Weight approx.: 733 kg Knedpfx Asfk Aifjhwod This allows the user to flexibly adjust the working surface height according to requirements, enhancing productivity and ergonomics. Height adjustment is standardly achieved via a manual hydraulic system within a range of 650 to 1050 mm (other heights available on request). Like the SST fix series, the worktop features a 100 x 100 mm grid of Ø 28 mm holes. When used in combination with processing machines, test or post-processing fixtures (deburring, marking, checking) can be adjusted to match the clamping table height of the respective machine. The table systems can be easily relocated on site using a pallet truck. These mobile systems, with their various fastening and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced directly after removal from the machine and transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the work surface can be cost-effectively replaced if worn in the future. Price must be confirmed with the manufacturer before ordering! For accessories and further information, please follow this link:

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 450x320 mm Saw band length 4250x34x1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitre cutting left and right 60° without machine conversion · 34 mm saw band width · Large material support turntable, ball bearing mounted · Saw band guides positioned via extra-wide linear guides · Heavy-duty, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Free-standing, safe and ergonomic control console · Storage space for saw bands and consumables · Cutting pressure and feed rate regulator · Fully hydraulic vice · Super-fast preclamp (front loading) · Material height sensor (automatic cut-start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lower feed to material or start cutting for serial cuts 4. Stop saw band 5. Raise frame just above material 6. Release vice Optimal, material-independent cutting results through fine adjustment of the saw frame using: * Pressure control valve (cutting pressure-force) * Feed control valve (speed) * Switches with pictograms, easy and clear to operate Knjdpjfgyicsfx Ahwsd

Sąlyga: naujas, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350 x 200 mm Kedofd Abaopfx Ahwond Saw band length: 3375 x 27 x 0.9 mm Band speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Space requirement: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing mounted rotary table - Vice laterally adjustable - Solid, large material support - Automatic cooling system The illustration shows the semi-automatic version.

Sąlyga: naujas, Table height: 800 mm Dimensions (LxWxH): 2980 x 1480 x 800 Kodpfx Ajfk Ailjhwjnd Table width: 1480 Table length: 2980 Approximate weight: 630 kg Special worktable systems of the SST, SFT, and SWT fixed series as 3D clamping workstations for efficient production of assembly, welding, and bonding constructions, e.g. fixtures, railings, frames, etc. With the help of the comprehensive range of clamping accessories (see catalog section welding table accessories), these table systems can also be used as flexibly configurable fixtures and thus allow for high-quality production of small and medium series. The special worktables are equipped with a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, which features a Ø28 mm hole grid. Additionally, the tabletop offers a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The table perforation allows the use of a wide variety of clamping elements and fastening aids. For special applications, the tabletop surface can also be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials ST70, as an alternative to the standard. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in case of later wear. This ensures the table system remains particularly sustainable for long-term use. Price must be reconfirmed with the manufacturer before ordering!

Sąlyga: paruoštas naudoti (naudotas), Caractéristiques techniques En cours de vérification Longueur du chariot à doubles rouleaux : 3000 mm Moteur de 5,5 kW 4 vitesses de rotation : 3000, 4000, 5000 et 6000 tr/min Unité inciseur 0,75 kW Guide parallèle avec réglage fin 1200 mm Lame inclinable ⌀ 350 mm (max. 450 mm) Lubrification centralisée automatique pour l’axe de pivotement de la lame Hauteur de coupe : 100 mm (max. 150 mm avec lame de 450 mm) Hauteur de coupe à 45° : 70 mm (max. 106 mm avec lame de 450 mm) Puissance et moteurs Tension : 400 V Raccordement : Triphasé Puissance : 7 kW Kjdeuciqajpfx Ahwend Moteur : 7,5 CV Encombrement

Sąlyga: naujas, Gamybos metai: 2025, Patented mitre system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw band drive Swivel range: 30° right / 45° left Cutting capacities in mm: 45° left: round 300, flat 300 x 300 90°: round 410, flat 620 x 410 45° right: round 360, flat 420 x 360 Ksdpfxeh S Nxpj Ahwond 30° right: round 300, flat 300 x 300 Remaining piece length without bundle clamping: 60 mm Recommended options: Micro-spraying device Laser light Clamping pressure regulator Powered chip brush Manual lifting roller Mounting elements

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre band saw K-tech DG 50/33 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut Knedpfx Ahefg E Hlowed - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic operation of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off 5. Raise frame just above the material 6. Open vice

Sąlyga: naujas, ROGI SAWING MACHINE TYPE CY355 INVERTER VARIABLE SPEED SEMI-AUTOMATIC Saw blade dimensions ----- 3770 x 34 x 1.1 mm Saw speeds ----- variable 20-80 M/min Motor power ----- 2.2 KW - 400V - 3 Phase Ksdoga Tzxjpfx Ahwend Weight ----- 855 KG Sawing capacity 90° ----- 355 mm / 490 x 300 mm Sawing capacity 60° ----- 230 mm / 180 x 220 mm Sawing capacity 45° ----- 350 mm / 290 x 340 mm Sawing capacity -45° ----- 290 mm / 250 x 250 mm INCLUDES: Saw blade Workpiece stop Base cabinet Manometer for saw blade tension Saw blade guide with carbide inserts Hydraulic quick-release vice Coolant pump Hydraulic drop cylinder Motor protection switch Automatic end-stop