Prispaudimo stalas Dalijimo stalas

Peiseler 320 x 320 mm 360°

Sąlyga: naujas, Metal band saw OPTIMUM OPTIsaw S275N - Showroom machine - Feed rate steplessly adjustable, pivoting ----- Technical Data ----- Swivel range: 0 - 60°, Cutting height: 150 mm, Cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min, Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Kledpeu R S Hpofx Af Iel Weight: 185 kg - new showroom machine -

Sąlyga: naudotas, Walther Trowal Circular Trough Vibratory Finishing Machine, Model CLS-230 Ref. No. 05.833/00 Year of manufacture: 1969 Trough diameter: 1100 mm Overall trough height: approx. 650 mm Process container / gross volume: max. 230 liters Usable volume: approx. 115 liters Speed: 1100 to 1800 rpm, infinitely variable Motor power: 7.5 kW Kodpfsfqpxisx Af Iell Electrical connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator drive - Manually adjustable eccentric balance weights - Trough with polyurethane lining (lining partially damaged/worn) - Sound-insulated lid - Manual separation flap - Built-in screen separation device after the separation flap - Liquid connection - Material discharge opening: 180 x 150 mm - Control cabinet for wall mounting - Baffle cover with perforated screen Space requirement with base (L x W x H): 1800 x 1750 x 1700 mm Net weight: approx. 1800 kg Good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and circulated extremely gently. The continuous relative movement between the workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Sąlyga: geras (naudotas), Apvalaus plieno pjovimo diapazonas ties 45°: 250 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 280 mm, pjovimo aukštis (maks.): 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity at 45º: Kledpfx Afott Nd Rs Ijl 250 mm round 250 mm square Saw speed: 40/80 m/min Saw blade: 3,320 x 27 x 0.9 mm Mitre angle: 0 - 60º Equipped with: - Cooling system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine dimensions (LxWxH): 190 x 120 x 135 cm

Sąlyga: naudotas, Gamybos metai: 2007, pjovimo plotis (maks.): 1 060 mm, pjovimo aukštis (maks.): 1 060 mm, Bandsaw Kasto HBA 10×12 Year of manufacture 2007 Cutting ranges: Round cutting area: 1,060 mm Square cutting area: 1,060 x 1,060 mm Flat cutting area: 1,060 x 1,260 mm Clamping range: 300 – 1,260 mm Minimum workpiece dimension: approx. Ø 300 mm Minimum cut length: 10 mm Minimum remnant length (single cut): 20 mm Minimum remnant length (automatic operation): 100 mm Table load capacity max. 50 tons Table travel: 6,100 mm Total drive power: 20 kW Saw motor: 11 kW Cutting speed infinitely variable at 50 and 60 Hz: 12 – 90 m/min Automatic single feed length: 2,100 mm Clamping force of machine vice: 50,000 N Saw blade dimensions: 11,430 x 80 x 1.6 mm Ksdpfx Aewk D Efsf Ioll Cutting feed: steplessly adjustable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: via easily replaceable brush, motor-driven This offer is exclusively for commercial customers as defined by §14 BGB No sale to private individuals

Sąlyga: geras (naudotas), Gamybos metai: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drill and milling machine, model making mill - Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories - Rotatable cross table: 490 x 400 mm - Travel (X/Y/Z): 320/385/430 mm - Spindle taper: SK30 - Drive: 1.1 kW - Speeds: 560 to 14,000 rpm, 8 steps - Accessories: included, see photos Klsdpfx Ajnzpx Rsf Ijl - Dimensions: 1000/680/H1970 mm - Weight: 477 kg

Sąlyga: naudotas, Hydraulic Workshop Press, Broaching Press, Keyway Broaching Press Hydraulic Workshop Press, Custom-built, MaVo Type 5t-20 Was used for broaching keyways in through holes. Pressing force: 5 tons (at 100 bar hydraulic pressure) Frame width: 770 mm Cylinder stroke: 220 mm Distance from piston rod thread to table traverse: max. 900 mm Pressing speed, ram down: approx. 11.5 mm/sec = 220 mm in 19 sec. Klodpfx Aewki Apef Ijl Pressing speed, ram up: approx. 24.5 mm/sec = 220 mm in 9 sec. Motor power: 5.5 kW Power supply: 400 V, 50 Hz - Two-hand control (2 buttons for down, 1 button for up) - Hydraulic pump: HAWE, Type K5/3 (also delivers 400 bar, but becomes extremely noisy at that pressure) - Threaded connection on piston rod: M42 x 1.5 mm external thread - 1 screw-in extension approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm length - 2 support plates - Very robust steel construction made of 140 double T-beams - Load capacity of the steel frame estimated at 40 tons or more - Can be moved with a pallet truck Space requirement (L x W x H): 1200 x 930 x 2280 mm Weight: 485 kg

Sąlyga: geras (naudotas), Gamybos metai: 2002, From business closure: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Max. punching and shearing capacity: 1,000 kN Punches 31 mm holes in 25 mm steel Shears flat bar up to 500 mm length with a material thickness of up to 18 mm steel Contact length stop included A wide range of accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg Kljdjt Iklkjpfx Af Iel

Sąlyga: naudotas, Gamybos metai: 1987, Technical details: Swing diameter over bed: 500 mm Swing diameter over support: 280 mm Turning length: 1,500 mm Distance between centers: 1,500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Speed range: 25-1,250 / 32-1,600 / 36-1,800 - 18 steps rpm Feed range: 0.05 - 8.5 mm Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 200 mm Total power requirement: approx. 8.2 kW Machine weight approx.: 2.5 t Kodpfou Ixznex Af Ijll Machine dimensions approx. LxWxH: 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (end position switch clutch not functional, manual shut-off required) Top slide with 4-position tool post Steel plate Ø 705 mm with offset threaded holes

Sąlyga: geras (naudotas), Gamybos metai: 1963, Vertical Turning Lathe Manufacturer: JUNGENTHAL, Type: DK 1400, Year: 1963, equipped with 1-axis digital readout. Maximum turning diameter: 1400 mm Klsdpovi Hrysfx Af Iel Faceplate: 1250 mm automatic turret head Spindle speeds: 3.5-180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For additional specifications, please refer to the data sheet. Machine documentation available. Dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t In good overall condition.

Sąlyga: naudotas, Gamybos metai: 2003, x-travel: 930 mm y-travel: 400 mm z-travel: 406 mm Spindle speed: 9–6750 rpm Table: 1370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (x) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product information "Multifunction Milling Machine Optimill MF 4 Vario – Tool Milling Machine with Variable Speed" Optimill MF 4 Vario – Multifunctional drilling and milling machines for professional use. Electronically infinitely variable drive with frequency inverter "Made in Germany" and digital 3-axis position indicator DPA 21. Heavy, robust construction made from high-quality Meehanite cast iron. High concentricity accuracy due to tapered roller bearings, less than 0.01 mm measured in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X and Y axes with adjustable dovetail guideways. Coolant device. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse (Z-axis). Equipment details: - Frequency inverter quality Made in EU - Drilling/Milling head tilt ±45˚ - Overhang 200–680 mm - Spindle speeds - Infinitely variable speed regulation - Particularly wide speed range - Drilling depth stop, adjustable with millimetre scale, front-reading - Safety screen, height adjustable and generously sized - Cross table, solid, generously sized, precisely surface machined - Motorized table height adjustment Z-axis - Adjustable end stops - OPTI control panel, integrated switch panel - Integrated digital position display DPA 21 with speed display - X-axis: motorized table feed, stepless speed regulation, rapid traverse, forward/reverse rotation Kedpfxot U Rm Ie Af Isll Technical data: Product length: 1,500 mm Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total connected load: 4 kW Electrical voltage: 400 V Phase(s): 3 Ph AC power supply, supply frequency: 50 Hz Maximum face mill size: 100 mm Maximum end mill size: 20 mm Vertical spindle overhang: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range Number of speed ranges vertical spindle: 8 Vertical spindle speed control: electronically adjustable Horizontal milling table length: 1,370 mm Horizontal milling table width: 254 mm Distance vertical spindle to horizontal milling table, min.: 40 mm Distance vertical spindle to horizontal milling table, max.: 446 mm Horizontal table T-slot size: 16 mm Horizontal table T-slots: number 3 Horizontal table T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle drive motor (normal operation): 3 kW Coolant pump(s) drive motor: 100 W X-axis travel (manual): 930 mm Y-axis travel (manual): 400 mm Z-axis travel (manual): 406 mm X-axis travel (automatic): 850 mm Z-axis travel (automatic): 350 mm Drilling capacity steel (S235JR): 32 mm Permanent drilling capacity steel (S235JR): 28 mm Vertical spindle swing range, milling head Z-X plane: +/- 45 degrees Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev