Sriegio valcavimo mašina

PEE-WEE P 20 US

Sąlyga: naudotas, Gamybos metai: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Number of tool stations: 35 Approx. machine weight: 3.3 t Space requirements (approx.): 2.11 x 1.2 x 1.89 m Used CNC sliding and fixed headstock turning/milling center with B-axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B-axis: freely programmable from 0°–130° Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear slides: 2 Total number of tool stations: 35 Itsdpfx Afevivx Ne Iob Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding head and fixed head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross drilling at the rear Chip conveyor Fire extinguishing system FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Sąlyga: naudotas, Gamybos metai: 2004, Technical Data: Main Spindle: Maximum turning diameter: 33 mm Maximum spindle speed: 8000 rpm Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Z1 axis travel: 320 mm X1 axis travel: 50 mm Y1 axis travel: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool Mounting Slide 1: Number of tools Fixed with 16 x 16 mm tool shank: 5 pieces Slide 2: X2 axis travel: 165 mm Z2 axis travel: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool Mounting Slide 2: Number of stations with revolver and integrated spindle: 8 stations Number of axially driven tools (integrated): 8 pieces Itodpjtzyx Tjfx Af Iob Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - Fanuc iT CNC control - Workpiece unloading system - IEMCA bar feeder - 5-position tool holder plate for Slide 1 - Electrical interface and software for bar feeder - Collet chuck for main and sub spindle - 2 double drill holders for rear machining support with cylinder - Sub spindle part ejector

Sąlyga: naudotas, CNC lathe with Y axis and sub-spindle Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T, ASA 5. Main spindle power 15 kW. Self-centering chuck diameter 175 mm. ASA 5 spindle mount. Bar capacity 52 mm. Turning diameter 230 mm. Turning length 500 mm. Spindle speed 5000 rpm. Number of tool turrets: 1. Number of tool stations in the first turret: 12. Number of live tools in the first turret: 12. First turret tool interface: VDI 30. X-axis travel 160 mm. Y-axis travel +/- 32 mm. Z-axis travel 550 mm. Rapid traverse feed (X, Y, Z): 30 m/min. Sub-spindle: yes. ASA 5 spindle nose. Sub-spindle speed 5000 rpm. Sub-spindle power 9 kW. Sub-spindle bar capacity 30 mm. Bar feeder make and model: LNS with single bar tube. Chip conveyor: belt type. Presetter: yes. Year: 2000. The machine is in our warehouse in Gussago BS, powered up. Mimu Machine Tools, Italy. Iedpfoqn E U Tex Af Ijtb

Sąlyga: naudotas, Gamybos metai: 2001, x-axis travel: 2050 mm y-axis travel: 1100 mm z-axis travel: 800 mm Control: Fanuc 18iM Super Cap II Spindle speed: 60-6000 rpm Tool magazine: 60 positions Tool holder: BT50 Total power requirement: 26 kW Machine weight approx. 23.6 t Space requirement approx. 6.3 x 3.3 x 3.8 m The machine will be available for loading from 03/2024! Description Itsdpfx Afjrw Dkne Iob X-axis: 2050 mm, Y-axis: 1100 mm, Z-axis: 800 mm, Spindle speed: 60-6000 rpm, Number of tool stations: 60, Tool magazine: BT 50, Drive power: 22/26 kW, Table pitch: 250 mm, Control: FANUC 18iM Super CAP II with 10.4-inch display, Length: 6250 mm, Width: 3300 mm, Height: 3800 mm, Weight: 25 t, with High Precision Contour Control, Central lubrication extension (2005), axis upgrade (X-Y-Z) to linear scales (0.001 mm), Memory expansion 128 KB, tool compensation memory (200 pcs), High Speed Remote Buffer, Extraction via HEPA filter system, upgrade to high-pressure internal coolant supply 20 bar, and zero-point clamping system with 16 pots each.

Sąlyga: geras (naudotas), Gamybos metai: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Isdpfexflxajx Af Ijtb Control unit: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel range X-axis: 300 mm Travel range Y-axis: 300 + 100 mm Travel range Z-axis: 330 mm Rapid traverse in X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Permissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Connected load: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): - CNC machining center Fanuc Robodrill α-T21iFa - Coolant pump and chip tray The precise scope of supply is as per the photo documentation. The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel ranges of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, this machine offers versatile machining capabilities. The tool changer with 21 positions ensures flexible production processes and minimizes setup times. The spindle reaches speeds up to 10,000 rpm, enabling both fine finishing operations and high-performance machining to be carried out efficiently. The Fanuc Series 31i-Model A5 control unit facilitates comfortable and reliable programming. Thanks to a maximum workpiece load of 200 kg and its compact footprint, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness or currentness of the information provided.

Gamybos metai: 2007, Sąlyga: paruoštas naudoti (naudotas), - NAUDOTAS - 8 AŠIŲ CNC TEKINIMO STAKLĖS SU FREZAVIMO GALVA, APATINĖS REVOLIUCINĖS GALVOS IR PRIEŠSPALVIO VELENU MAKSIMALUS SUKIMOSI SKERSMUO: 660 mm MAKSIMALUS TEKINIMO ILGIS: 1495 mm Itodow Ey R Tepfx Af Isb MAKSIMALUS TEKINIMO SKERSMUO: 660 mm STRYPŲ TALPA: 65 - 65 mm PAGRINDINIS VELENAS: 35-5000 aps./min.; 22 kW; 254 mm PRIEŠSPALVIO VELENAS: 35-5000 aps./min.; 18,5 kW; 254 mm GALVA: CAPTO C6; -30°+195°; 15-12000 aps./min.; 18,5 kW X AŠIES EIGA: 580 mm X2 AŠIES EIGA: 150 mm Y AŠIES EIGA: 160 mm Z AŠIES EIGA: 1545 mm Z2 AŠIES EIGA: 1490 mm B AŠIES EIGA: 1550 mm GREITOSIOS PASTŪMOS X-Y-Z: 38 - 26 - 38 m/min REVOLIUCIJOS GALVA: 9 POZICIJOS ĮRANKIŲ MAGAZINAS: GRANDININIO TIPO; 80 POZICIJŲ AUKŠTO SLĖGIO AUŠINIMAS: 18 bar VALDYMO BLOKAS: MAZATROL MATRIX SVORIS: 11800 kg BENDRI MATMENYS: 5090 x 3270 x 2830 mm PRIEDAI: DROŽLIŲ TRANSPORTERIS; POPIERINIS FILTRAS; ĮRANKIŲ NUSTATYMO PRIETAISAS

Sąlyga: naudotas, Gamybos metai: 2011, Bar diameter: 32 mm Spindle bore: 38 mm Turning length: 320 mm Spindle speed: 8,000 rpm C-axis: 0.001° Itedpfx Aew Ed Tfof Isb Pick-off station: 32 Sub-spindle turning length: 150 mm Sub-spindle speed: 8,000 rpm Sub-spindle C-axis: 0.001° Number of tools: 4+7+6+10 = 27 Number of milling stations: 4+4 Control: Mitsubishi M70 Number of axes: 5 + 2x C axis (total 7) Chip conveyor: yes (LNS) Total power requirement: 7.5/5.5 kW Machine weight: approx. 3,300 kg Space requirement: approx. 2.5 x 1.2 x 1.82 m plus FMB CNC Swiss-type automatic lathe Citizen A32-VII PL, year of manufacture 08/2011 with bar feeder FMB Turbo 3-36 Very good condition! Main spindle motor and bearings are new. Delivered complete with all accessories, clamping devices, and manuals.

Sąlyga: naudotas, Gamybos metai: 2016, Technical Details: Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speed: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev + cross: 0.025 - 0.376 mm/rev Spindle bore: Ø 42 mm Tailstock quill taper: ISO MK4 Tailstock quill travel: 180 mm Total power requirement: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions (LxWxH) approx.: 2.4 x 1.0 x 1.7 m The lathe does not have a rapid traverse. Positioning over 2 axes Readout via Pinacho Lathe Controller Iedpfsvav Sdex Af Ijtb Multifix toolpost with turning tool Coolant system Foot pedal Thread cutting possible (metric, Whitworth, module, pitch)

Gamybos metai: 2002, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW Itedehzbipspfx Af Ieb - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Sąlyga: naudotas, Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 540 mm, greitas poslinkis X ašimi: 24 m/min, greitas poslinkis Y ašis: 24 m/min, greitasis eiga Z ašyje: 20 m/min, X ašies padavimo greitis: 16 m/min, Y ašies padavimo greitis: 16 m/min, padavimo greitis Z ašis: 16 m/min, nominali (akivaizdi) galia: 16 kVA, valdiklių gamintojas: Heidenhain, valdiklio modelis: ITNC 530, stalo apkrova: 800 kg, bendras svoris: 5 300 kg, veleno greitis (min.): 10 000 aps./min, veleno veikimo valandos: 8 500 h, ašies variklio galia: 12 W, veleno nosis: ISO B40, ašies skaičius: 1, įrankių magazino lizdų skaičius: 24, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, drožlių transporteris, Machine in very good condition and maintained by the manufacturer. Available immediately. Renishaw probe Video available upon request. Itedpowxrgtofx Af Iob Delivery and installation possible by our team.