Lakštinio metalo briaunų apdirbimo staklės

PAUL ERNST Pluto EDD 600

Gamybos metai: 2002, būklė: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. Kjdpfxet Hw Sho Aixedp 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, veikimo valandos: 55 771 h, lazero valandos: 35 157 h, lazerio galia: 3 200 W, maks. lakšto storis: 20 mm, plieno lakšto storis (maks.): 20 mm, aliuminio lakšto storis (maks.): 8 mm, stalo ilgis: 3 000 mm, stalo plotis: 1 500 mm, X ašies eiga: 3 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 150 mm, pozicionavimo greitis: 140 m/min, pozicionavimo tikslumas: 0,02 mm, paskutinio kapitalinio remonto metai: 2024, padavimo ilgis X ašis: 3 000 mm, padavimo eiga Y ašimi: 1 500 mm, padavimo ilgis Z ašis: 150 mm, Įranga: apsaugos šviesos užtvara, aušinimo blokas, dokumentacija / vadovas, Lazeris veikia, galima apžiūra ir išbandymas. Reguliariai prižiūrėtas, geros techninės būklės. Visi veidrodžiai buvo pakeisti 2024 metais. Kdjdpev Hxbbefx Aixep

Gamybos metai: 2001, būklė: beveik kaip naujas (naudotas), Double-belt sander, two lower sanding heads, each with a main motor of 2 x 7.5 kW, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished. The conveyor belt is in very good condition. The graphite shoe is new. The machine features two lower units: the first is a rubber contact roller, and the second is a combination unit with a graphite shoe. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation system. Pneumatic belt tensioning. Sanding belt speed is 18 m/s. Conveyor belt feed speed is 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Rated total power: 21 kW. Maximum workpiece height: 160 mm. The machine is equipped with two lower working rollers. The conveyor belt operates from above. Kedpsfxpbmefx Aixedp

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2000, bendras svoris: 1 000 kg, bendras aukštis: 3 500 mm, keliamoji galia: 2 500 kg, gerklės gylis: 5 000 mm, darbinio aukščio: 3 000 mm, Sertifikuota DGUV iki: 06/2025, Įranga: dokumentacija / vadovas, Column and Wall-Mounted Slewing Cranes TAUCHA / DEMAG / LIFTKET – 50 kg to 2,500 kg – Electric Chain Hoists – Multiple Systems Available For sale are several column and wall-mounted slewing crane systems from the manufacturers Mechanik Taucha Fördertechnik GmbH, Demag, and Liftket. The cranes feature load capacities ranging from approx. 50 kg to 2,500 kg and are suitable for use in workshops, production sites, assembly areas, as well as in internal material handling and logistics. Some systems are designed as classic column slewing cranes with single arms, while certain units are configured as double-arm column slewing cranes and can therefore serve two work areas at the same time. The cranes are equipped with electric chain hoists and trolleys, and are operated via pendant controller units. Kjdsyt Hc Dspfx Aixedp Each system can be purchased individually. Inspection available by appointment. Taucha Column Slewing Crane – Load Capacity 2,500 kg Heavy-duty column-mounted slewing crane with floor-mounted steel column and jib arm for industrial lifting and assembly operations. Taucha Column Slewing Crane – Load Capacity 2,000 kg Column slewing crane with pivoting jib for material handling in production and assembly environments. Taucha Column Slewing Crane – Load Capacity 1,600 kg Industrial crane with column installation and slewing jib, suitable for medium to heavy loads. Taucha Column Slewing Crane – Load Capacity 1,250 kg Column crane with jib arm and trolley for precise material movement. Taucha Column Slewing Crane – Load Capacity 1,000 kg Column crane with electric chain hoist and pivoting jib for assembly areas. Taucha / Liftket Column Slewing Crane – Load Capacity 1,000 kg Column crane with Liftket electric chain hoist, suitable for industrial lifting applications. Taucha Column Slewing Crane – Load Capacity 800 kg Column slewing crane with jib arm and trolley for workshop and production facilities. Taucha Column Slewing Crane – Load Capacity 800 kg (Double Jib) Column slewing crane with two opposite jib arms, suitable for servicing two workstations. Taucha / Liftket Column Slewing Crane – Load Capacity 500 kg Column crane with electric chain hoist for lighter lifting applications. Liftket Column Slewing Crane – Load Capacity 500 kg Column crane with Liftket chain hoist and pivoting jib. Demag Wall-Mounted Slewing Crane – Load Capacity approx. 315 kg Wall-mounted slewing crane with Demag electric chain hoist, suitable for workplaces with limited space. Taucha Column Slewing Crane – Load Capacity 250 kg Compact column slewing crane for light loads. Taucha Column Slewing Crane CS KD 250-6 – Load Capacity 250 kg Column slewing crane with pivoting jib and electric chain hoist. Liftket Column Slewing Crane – Load Capacity 250 kg Column crane with Liftket electric chain hoist for assembly operations. Taucha Column Slewing Crane – Load Capacity 200 kg Column crane for light material handling. Taucha Column Slewing Crane – Load Capacity 125 kg Light-duty column slewing crane for small components and tools. Taucha Column Slewing Crane – Load Capacity 100 kg Compact workshop crane for light-duty applications. Taucha Column Slewing Crane – Load Capacity 50 kg Very light-duty slewing crane for minor lifting tasks.

Būklė: naudotas, Gamybos metai: 2003, SCM SANDYA 20 modelio 20 M3 135 naudota kalibravimo ir šlifavimo mašina pagaminimo metai: 2003 serijos nr. AE/024903 didžiausias darbinis plotis: 1350 mm padavimo greitis: 3,5–18 m/min su inverteriu darbinis aukštis: 4–170 mm Kdjdpoxwbydefx Aixop vakuminis stalas: 7,5 kW Sudėtis: I grupė: griovelinis plieninis kalibravimo volas, D. 250 mm, variklis 22 kW II grupė: šlifavimo volas d. 250 mm, kietumas 45 SH, variklis su dviem greičiais 9/11 kW, 1400/2800 aps./min. III grupė: kombinuotas volas d. 170 mm, kietumas 30 SH + segmentuota elastinga padas (46 sekcijos), variklis 11 kW su inverteriu IV grupė: šilkinimo volas Scotch-Brite Stalo padėties nustatymas su apdirbamu ruošiniu Juostų matmenys: 2620 x 1370 mm II ir III juostų pūtikliai automatinis kilimo centravimas elektroninis pirmojo/antrojo/trečiojo volo ir pado valdymas

Būklė: naujas, Shaft diameter: 180 mm Upper roller diameter: 60 mm Lower roller diameter: 50 mm Working speed: 5 m/min Motor power: 3 kW Length: 1200 mm Width: 850 mm Height: 1200 mm Approx. weight: 1000 kg Technical specifications: - Welded frame made of steel construction - 3 rollers are driven - Hardened and ground shafts made of high-strength special steel - Rollers are hardened and ground - Horizontal and vertical working position Kdjdpod Ab H Nofx Aixop - Hardened standard rollers - Mobile control panel - Angle guide rollers - Equipped with brake motor for precision bending - Digital displays (2 units) Options: - Standard digital display - NC control unit 7 Screen, EUR 9,000 HPK 50 file TypeSizeMin. DiaNotes 1 60x10 20x5 500 250 Standard Rolls 2 80x20 50x5 500 250 Standard Rolls 3 32x32 12x12 400 250 Standard Rolls 4 Ø 35 Ø 10 350 250 Optional Rolls 5 Ø 60x2 Ø 15x1,5 600 200 Optional Rolls 6 2”x3.91 1/2”x2.77 400 200 Optional Rolls 7 50x25x3 20x15x2 450 250 Optional Rolls 8 45x3 20x2 600 300 Optional Rolls 9 60x60x6 30x30x4 650 350 Optional Rolls 10 50x50x5 30x30x4 550 350 Optional Rolls 11 60x7 20x3 550 250 Standard Rolls 12 50x6 20x3 500 250 Standard Rolls 13 60x7 20x3 500 250 Standard Rolls 14 UPN 80 UPN 30 600 250 Optional Rolls* 15 UPN 65 UPN 30 600 250 Standard Rolls* * Special washer (spacer) may be required / Only with special Beam Bending Attachment • Capacities are given for plate yield strength of 260 N/mm²

Būklė: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 84659300, Mašina susideda iš 3 darbo modulių: 1. XSV šepečiai (12 besisukančių ir osciliuojančių šepečių) 2. XSV šepečiai (12 besisukančių ir osciliuojančių šepečių) Kedoxn Ifuepfx Aixsdp 3. Volelinis šepetys Padavimo juosta 1350 mm.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2010, FICEP PJŪKLAS 1045 BH Kodpfx Aowd Ugtjixjdp Pagrindinės techninės specifikacijos - Mažiausia pjovimo talpa prie 90°: 80 x 10 mm - 1015 x 450 mm - Pjovimo talpa prie 45°: 620 x 450 mm - Pjovimo talpa prie 60° (galima tik ant dviejų flanšų su atitinkama opcija): 350 x 350 mm - Pasukimo kampai +45° / -60° - Žingsninės juostos matmenys mm: 41 x 1,3 - Juostos greitis m/min: 20 - 100 - Juostos variklio galia kW: 5,5 - Darbinio paviršiaus aukštis mm: 850

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Pirmasis paleidimas: 2024 Darbo režimas: pusiau automatinis Mašinos tipas: horizontalioji juostinė pjovimo staklės Pjovimas: kampinis pjūvis Kampinio pjūvio diapazonas: -60° iki 60° (kairė/dešinė) Pavaros galia: 5,5 kW, 3 × 400 V/50 Hz Juostos greitis: 20–120 m/min Juostos matmenys: 7900 × 54 × 1,6 mm Medžiagos pakrovimo aukštis: 810 mm Trumpiausias likutinis ilgis: 40 mm Mažiausias pjovimo skersmuo: Ø 10 mm Pjovimo pajėgumai: Kodpfx Aioyxcu Uexsdp - 0 laipsnių: apvalus D640 mm, stačiakampis 820×640 mm, kvadratas 640 mm - 45 laipsnių dešinė: apvalus D560 mm, stačiakampis 560×400 mm, kvadratas 540 mm - 45 laipsnių kairė: apvalus D580 mm, stačiakampis 580×560 mm, kvadratas 560 mm - 60 laipsnių dešinė: apvalus D380 mm, stačiakampis 380×250 mm, kvadratas 360 mm - 60 laipsnių kairė: apvalus D400 mm, stačiakampis 400×530 mm, kvadratas 400 mm Matmenys (IxPxA): 3750×2400×2700 mm Svoris: 2500 kg

Būklė: naudotas, Gamybos metai: 2006, Webhöhe min. 80 mm, max. 1220 mm. Flanschhöhe min. 42 mm, max. 600 mm. U-Profile min. 80 mm, max. 1200 mm Flanschhöhe min. 45 mm, max. 300 mm. Winkelprofile min. 80 x 80 x 8 mm, max. 300 x 300 x 50 mm Flachstahl min. 100 mm, max. 1220 mm Quadratrohre min. 80 x 80 mm, max. 600 x 600 mm Rechteckrohre min. 80 x 40 mm, max. 1200 x 600 mm Maximales Positioniergewicht: 15.000 kg Maximales Liniengewicht des zu bearbeitenden Profils: 750 kg/m Max. Verfahrgeschwindigkeit: 30 m/min Anzahl Bohrspindeln: 3 - Zwei horizontale Bohraggregate mit einzelnem Spindel - Ein vertikales Bohraggregat mit einzelner Spindel Maximaler Bohrdurchmesser: 50 mm - mit Morsekegel Nr. 4 Maximale Bohrstärke: 75 mm Motorleistung pro Spindel (Wechselstrom): 15 kW Spindeldrehzahl (stufenlos programmierbar): 180–3000 U/min Positionierweg zur Anpassung an die Teilungslinie: - Vertikale Bohrspindel: 20–1200 mm - Horizontale Bohrspindeln: 10–600 mm WERKZEUGWECHSEL - Anzahl Werkzeugwechsler: 3 - Anzahl wechselbarer Werkzeuge: 6 Kdodpfex N Iclox Aixjp - Werkzeugaufnahme ISO 45 Modell 1260 BH für Profile-Kaltsägeschnitte: - Sägeleistung 90°: min. 80 x 10 mm - Sägeleistung 90°: max. 1250 x 600 mm - Sägeleistung 45°: max. 800 x 600 mm - Sägeleistung 60°: max. 500 x 500 mm - Sägebandantrieb 11 kW - Schnittgeschwindigkeit: 20–100 m/min - Sägebandabmessung: 67 x 1,6