PANHANS 693 / EURO 30

PANHANS 693 / EURO 30

Būklė: geras (naudotas), Gamybos metai: 1992, Single Piece Wood Sander Sanding top & bottom Electric height adjustment with digital display Continuously adjustable feed speed Star-delta start-up Pneumatic belt tensioning Main switch Sanding belt oscillation Top and bottom finishing brush unit, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Sanding belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed & outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Technical details and prior sale subject to change. • Stated prices are ex works (location) - loaded free of charge! Ijdpfjwyda Ujx Aaueia • Machines have been cleaned and function-tested. • All machines are sold as seen without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG Ioderigxyjpfx Aausia - Machine length: 415 cm - Machine inspected and in original condition

Būklė: naudotas, Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation - Effective dust extraction directly at the sanding rollers - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes - Electropneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Belt speed: 22 m/s - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P Iiodpfx Aaevu Hgbeuja - CE compliant Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Būklė: naudotas, Gamybos metai: 1988, Atstumas tarp centrų: 1200 mm Sukimosi greitis A) 70–380 aps./min. Sukimosi greitis B) 380–2000 aps./min. Svoris: 2,2 t Tekinimo staklės +++++ Atkreipkite dėmesį, kad įrenginys yra išardytas ir paruoštas pakrovimui. Dėl šios priežasties negalima jos parodyti įjungtos arba padaryti vaizdo įrašo. Mūsų skelbime pateiktos pačios informatyviausios ir geriausios kokybės nuotraukos. Deja, papildomų nuotraukų atsiųsti negalime. Iiodpok Sat Dofx Aauja +++++

Būklė: naudotas, Gamybos metai: 1994, WEINIG PROFIMAT 23 AUTOMATIC 5-SPINDLE MOULDER – USED Configuration: Isdpfx Aajrm Rxweuoia - 1) Bottom horizontal spindle - 2) Right vertical spindle - 3) Left vertical spindle - 4) Top horizontal spindle - 5) Bottom horizontal spindle Working width: 230 mm Year: 1994 Voltage: 380/50

Būklė: naudotas, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single Wood Sanding Machine Ø Sanding from below/above Ø With 2 offset sanding units each (below and above) Ø Sanding units (below and above) arranged in series according to the planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finishing) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper feed units Ø Oscillating use of sanding belts (during the sanding process) Ø Absolute power connection via 5.5 kW motors and large-dimensioned drive drums Ø Oxide-ceramic sanding shoe for: - precise surface geometry Iiodet Tqy Eepfx Aauoa - no need for readjustment - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy-duty welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration damping. Offset sanding units with large-scale belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust, with sealing brushes and integrated sanding belt air-blast system to extend sanding belt service life. Sanding units made from heavy steel plate design as a basis for vibration-damped, smooth belt running. Absolutely backlash-free guides using ball linear sets made from hardened and ground shafts. Height adjustment of sanding units via hardened and ground special linear guides and preloaded guide carriages. Lasting precision due to dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers serve as contact rollers. Contact rollers and sanding shoes are optimally matched to the sanding belt grit load. The large-dimensioned drive drums guarantee full transmission of the sanding motors’ 5.5 kW output to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation. This enables maximum stock removal. Automatic machine stop trigger in the event of belt breakage. Optical indicator at the control panel and machine warning beacon. Finishing sanding shoes are completely maintenance- and wear-free, made from oxide-ceramic for optimal heat dissipation. Sanding belt tension by appropriately dimensioned pressure springs. Sanding belt release for belt changes using a pneumatic system for sensitive, distortion-free installation of new belts. Upper sanding unit and brushing device are centrally motorized, height-adjustable with digital display at the control panel for motorized sanding thickness adjustment. Integrated brushing and finishing device for improved surface finish, built into the main machine. Two vertically-aligned special brush rollers, 150 mm diameter, operating in the same direction as the feed. Separate height adjustment of the brush rollers using precise slide guides for wear compensation. Additional conveyor roller for removing or further transporting the workpiece out of the sanding machine, coupled with the transport belt. Wood guide at entry for hard, double-sided...

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig Profimat 26 Super Working width: 230mm Working height: 130mm Number of spindles: 5 Spindle configuration: Bottom: 4 kW Left Right: 7.5 kW Top: 5.5 kW Bottom: 4 kW Pneumatic pressure rollers divided into 3 sections Feed speed adjustable via variator: 5–24 m/min Isdpfx Aeu Hgd Ijaujia CE certificate Technical documentation

Būklė: naudotas, Number of sanding units: 2 Sanding width: 190 mm Maximum sanding height: 4–180 mm HESS GLORIA – 2-BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer’s Description: Iiodpfx Aev D Rg Djauja ---- Compact design constructed according to modern principles. Quiet and vibration-free operation thanks to a torsion-resistant, stable machine housing and special insulation. Safety features compliant with EU Machinery Directive, certified as “dust tested.” Offset sanding units equipped with large tension rollers for effective heat dissipation and stable belt guidance. Sanding units with forced sanding belt oscillation. Two-point sanding dust extraction directly at the sanding drum. Airborne dust extraction at the large tension rollers. Integrated sanding belt air-blow system for extended belt lifespan. Integrated brush and finishing device, adjustable by threaded spindle, with large dust extraction. Motorized adjustment of sanding thickness for the entire upper unit via precision lead screws and linear ball sets on hardened and ground precision shafts, protected against dust and dirt. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe proportioned for optimal grit load. Hardened and ground sanding rollers. Maintenance-free and wear-free oxide-ceramic sanding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional stability. Sanding belt tensioning via pneumatic cylinders. Belt change by pneumatically actuated belt release. Adjustable belt tracking during belt change. Electro-pneumatic pressure monitoring of compressed air supply with visual fault indicator. Automatic machine stop upon belt breakage or if infeed safety device (with integrated wood thickness control) is triggered. Visual indicator on control panel. Feed device and proven, calibrated, non-slip transport belts on precision-ground tables and spring-mounted pressure rollers. Cardan drive for consistent wood feed. Continuously variable feed speed. Chip removal adjustment via precision lead screw with scale ring (resolution 0.1 mm). Ergonomically arranged controls on the machine front: Top sanding and brush unit, bottom sanding and brush unit, workpiece transport, sanding thickness setting, operation indicators, fault indicators. Integrated control panel with lockable main switch. All motors electrically protected against overload. Technical Data: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Shortest workpiece length: 300 mm Feed speed: Infinitely adjustable, 5–25 m/min Sanding belt dimensions: 200 mm wide, 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 – 2500 m³/h, 20–25 m/sec Extraction connection ports: 2 x 160 mm diameter, top of machine housing External dimensions: Length: 1600 mm ...

Būklė: naujas, Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm LÖWER - DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Robust heavy-duty design with innovative features. Suitable for continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, from both top and bottom 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-resistant CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for cooler sanding and longer belt life - Positively guided pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine-dust extraction at the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized thickness adjustment via precision lead screws and large-sized linear ball-bearing units on hardened and ground precision shafts with dust and dirt protection - Lower-side material removal adjustment via precision lead screw, with scale ring display (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt relaxation within seconds Iiodovnv Tqspfx Aauoa - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated slip- and adhesion-resistant conveyor belts over heavy cast tables with super-fine planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Sanding thickness: 2-180mm - Four brake motors for the drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min. - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each, 0.37 kW - Extraction connection: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with soft disc 2740mm): 2600mm - Length with control panel (with soft disc 3035mm): 2985mm - Width: 880mm - Height: 1910mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-compliant ----- Price for the machine specified above: On request! ----- Optional accessories at additional cost: Workpiece air nozzle cleaning - Located at the machine outfeed, top and bottom, pneumatically controlled Sanding belt air jet cleaning, 4-belt Via nozzles arranged directly at the radius of the tension rolls inside the extraction unit, timer-controlled on/off, each 5...

Būklė: geras (naudotas), Longitudinal circular saw with max. 3 m cutting length max. cutting width 0.5 m Iodewumwfjpfx Aaujia max. cutting height 100 mm motor 12 kW overall length 5.8 m overall width 1.55 m