Greitaeigis radialinis grąžtas

Otto Müller SR23

Sąlyga: naudotas, Drilling capacity in steel (diameter): 23 mm Spindle taper: MK 2 Spindle stroke: 130 mm Throat depth: approx. 860 mm Nsdpfxewugrcs Agieku Table size: 1280 x 500 mm Clamping surface: approx. 1250 x 480 mm Speed range: 115 - 2400 rpm Workpiece height – max.: approx. 535 mm Drill chuck: Quick-change chuck 1-13 Machine weight: approx. 690 kg Total power requirement: 1 kW Dimensions (L x W x H): approx. 1300 x 1800 x 2100 mm Distance spindle center to column center (throat): approx. 860 mm Distance table to quill (workpiece height): max. 535 mm Horizontal/vertical adjustability of the arm: approx. 300 - 400 mm

Sąlyga: naudotas, Cutter Hersteller: Seydelmann Modell: K 204 Ultra Nkedpetu I T Eefx Agiju Ausführung: Edelstahl Volumen: 200 Liter 2 Messergeschwindigkeiten 2 Kesseldrehzahlen 2 Mischgeschwindigkeiten Abmessungen: 280 x 205 x 255 cm Elektrische Leistung: 78 kW Spannung: 400 V, 3 Phasen, 50 Hz

Sąlyga: naujas, Bernardo Horizontal Bandsaw HBS 275 – 400 V Nsded Du T Ispfx Agisku Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H):1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw band • Workpiece stop • Base frame • Pressure gauge for band tension • Vice with quick-action clamp • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Sąlyga: geras (naudotas), Gamybos metai: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm Nkjdpfeirax Usx Agisu - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, lazerio galia: 30 000 W, X ašies eiga: 3 050 mm, Y ašies eiga: 13 050 mm, Z ašies eigos atstumas: 450 mm, pozicionavimo tikslumas: 0,03 mm, kartojimo tikslumas: 0,02 mm, ruošinio svoris (maks.): 20 000 kg, įėjimo dažnis: 50 Hz, bendras ilgis: 16 800 mm, bendras plotis: 2 200 mm, bendras aukštis: 5 120 mm, garantijos trukmė: 24 mėnesiai, darbo diapazonas: 13 000 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, aušinimo blokas, avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, dulkių šalinimas, dūmų ištraukimas, GS-CL Serie, Glorystar Einzeltisch-Gantry-Metall-Laserschneidmaschine Laserleistung: 12.000–80.000 W Passend in einen Standard-40HQ-Container Die GS-L Serie ist eine Hochleistungs-Metall-Laserschneidmaschine mit Gantry-Bauweise und segmentiertem Maschinengestell. Das Maschinenformat kann flexibel an die Anforderungen des Kunden angepasst werden. Hauptmerkmale: ● Besonders großes Bearbeitungsformat durch Gantry-Design mit segmentiertem Maschinengestell ● Die GS-L Serie bietet den größten Z-Achsen-Hub und die größte Bauteilhöhe ihrer Klasse am Markt ● Ausgelegt für das Schneiden von dickwandigen Blechen über 20 mm ● Schneiden von ultradicken Blechen bis 70 mm möglich Njdpfxovmwn Hs Agisku ● Automatische Absaugung durch Unterdruck-Zonen; segmentierte Staubabsaugung ● Ausgestattet mit Hochleistungsgebläse für effektive Staub- und Rauchabsaugung Technische Daten: Bearbeitungsbereich (mm): 13.000 × 3.000 (Fasenschnitt: 12.500 × 2.500) Verfahrweg X-Achse (mm): 3.050 Verfahrweg Y-Achse (mm): 13.050 Verfahrweg Z-Achse (mm): 450 X/Y-Positioniergenauigkeit: ≤0,03 mm/m X/Y-Wiederholgenauigkeit: ≤±0,02 mm Max. Positioniergeschwindigkeit (synthetisch): 110 m/min Max. Beschleunigung: 1,2 G Min. Einstellwert: 0,001 mm Stellfläche (mm): 18.500 × 6.500 Maschinenabmessungen (mm): 16.800 × 5.120 × 2.200 Max. Tischbelastung: 20 t (gleichmäßige Lastverteilung)

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. Nkjdpfxjpugwio Agisu The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Gamybos metai: 2015, Sąlyga: naudotas, Parduodama W ir C profilio gamybos linija Skirta kelio atitvarų, stulpelių ir tvirtinimo elementų gamybai. Pilnai sukomplektuota linija, tinkama nuolatinei pramoninei gamybai. Liniją sudaro: Du dekoileriai Stulpelių gamybos linija Parapetų gamybos linija Du presai tvirtinimo detalėms gaminti Techniniai parametrai: Ilgis: 17 m Plotis: 1 m Aukštis: 1 m Variklio galia: 22 kW Svoris: 18 t Gamybos metai: 2015 Gamintojas: Chengxing Machinery (Kinija) Paskirtis ir privalumai: Ši W ir C profilio gamybos linija pritaikyta įvairių kelių saugumo elementų gamybai: atitraukiamųjų kelio atitvarų, atraminių stulpelių bei tvirtinimo detalių. Įranga užtikrina patikimą, stabilų ir nuoseklų gamybos procesą. Įrenginys yra paruoštas apžiūrai. Nedpfxexhf R Ij Agioku Jei turėsite daugiau klausimų – mielai atsakysime.

Sąlyga: beveik kaip naujas (parodų įrenginys), EXHIBITION MACHINE For sale is an as-new Drechselmeister STRATOS ECO woodturning lathe with a center distance of 680 mm. The exhibition machine is in original condition, therefore you receive full warranty. Technical specifications - Center height approx. 230 mm - Turning diameter approx. 455 mm (with optional external turning device up to 800 mm!) - Center distance approx. 680 mm (extendable!) - Spindle connection M33 x 3.5 with ASR (Euro) anti-rotation safety groove* - Spindle and tailstock taper: MK2 (Morse taper 2) - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (with scale and trapezoidal thread) Njdpfx Astpxt Rjgieku - Motor: 2 HP (230 V connection) - Weight: 177 kg The machine is located in A-5431 Kuchl and can be inspected any time during our business hours. Subject to prior sale! Shipping by freight: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT Related keywords: woodturning lathe, lathe, metal lathe, wood lathe, woodturning, woodturning chisel, wood spinning, turning, machine Reference: R-A0117

Sąlyga: beveik kaip naujas (parodų įrenginys), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Belt dimensions: 2000 x 150 mm Belt speed: 18 / 37 m/sec Power: 2.2 / 3.8 kW 400V/50Hz Weight: 110 kg Technical data and dimensions: subject to change/errors excepted Nsdpfxopgmufe Agisku

Sąlyga: naujas, Gamybos metai: 2022, SPECIAL PRICE, stock machine year 2022, condition: new List price: €4,200 STOCK MACHINE – The ARG 235 plus is a manual metal bandsaw offering high cutting precision. This machine enables stepless mitre cuts from -45° to +30° (pivot range: 45° to the left, 60° to the right). Technical Data: Njdpfemftv Rex Agieku ● Cutting capacity: - 90° round: 235 mm / square: 230 mm / rectangular: 280 x 180 mm - 45° right round: 165 mm / square: 145 mm / rectangular: 185 x 180 mm - 30° right round: 115 mm / square: 80 mm / rectangular: 115 x 80 mm - 45° left round: 185 mm / square: 160 mm / rectangular: 185 x 100 mm ● Saw blade drive power: 0.9/1.4 kW / 400 V / 50 Hz ● Blade speed: 40 and 80 m/min ● Saw blade: 2710 x 27 x 0.9 mm Standard Equipment: ● Powerful band drive ● Stepless feed adjustment from the control panel ● Manual workpiece clamping, movable vice with dovetail guide ● Easy mitre adjustment by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop (without scale) --> Also available in various sizes and configurations!