SPALMACOLLA

OSAMA S2 R 1300

Būklė: naudotas, Gamybos metai: 2021, Used machine Credpfx Aoygn Ihjbxjc Year of manufacture: 2021 Features and technical specifications: Uniform and consistent application across the entire working width as a result of an innovative technical solution and thanks to special vibration dampers that compensate for variations in uneven panels. Application rollers: With a special coating made from "acid-resistant synthetic rubber," allowing for various adjustments and therefore a long service life. Homogeneous glue dosing thanks to adjustable distribution trays. Safety guards on all moving parts ensure optimal operator safety. Electrical system: Fully sealed and compliant with European standards, with push-button control panel, 24V voltage. Technical data: Working width: 1300 mm Working height: 100 mm Application roller diameter: 185 mm Feed speed: 18 m/min Drive motor: 0.37 kW Working table height: 800 mm Dimensions: Length 780 mm, Width 2000 mm, Height 1350 mm Weight: 340 kg Includes stainless steel tank for water collection Location: Flörsheim Availability: Immediately

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, slėgis: 70 juosta, bendras aukštis: 1 600 mm, bendras plotis: 800 mm, bendras ilgis: 1 200 mm, temperatūra: 40 °C, darbinis slėgis: 70 juosta, triukšmo lygis: 80 dB, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, Approx. 15,000 L/Day Drinking Water Compact, fully automated reverse osmosis unit for producing hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, smaller industrial, and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feedwater: Seawater with high conductivity, approx. 55,000 µS/cm (high salt content) Permeate quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery rate: Approx. 30% (typical operating range) at 55,000 µm/cm conductivity Design temperature: Approx. 25 °C (operating range approx. −2 to 35 °C) Process Technology & Construction Crsdpsw Uf Ihofx Abxjc - DT module with open feed channel – highly fouling-tolerant and fully cleanable - Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) - Typically no chemical feedwater pre-treatment required (no acid dosing) - Integrated flush and CIP function, PLC-controlled - Skid mounting on stainless steel frame (AISI 316) - High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic - Pump parts in contact with seawater made of corrosion-resistant materials Operation & Power Data Feedwater flow: Approx. 1,000 L/h (reference value) Operating pressure RO module: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, 1~ Connected load: Approx. 6 kW Control, Monitoring & Safety - Local operator panel with integrated PLC control - Monitoring of pressures, flows, conductivity, and operating hours - Automatic shutdown including: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic diversion to drain) - Automatic “Stop & Rinse” function: Flushes seawater-contacted components with permeate during shutdown to minimize fouling during idle periods Dimensions & Weight (Skid) L × W × H: approx. 1,190 × 705 × 1,500 mm Weight: approx. 530 kg (dry), approx. 605 kg (in operation) Typical Applications - Ships, offshore platforms, ports - Island and coastal water supply - Hotels, resorts, smaller industrial and utility operations - Backup or peak load plant for existing drinking water production Further technical documentation, photos, as well as information regarding scope of delivery, pricing, and availability are available upon request.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Vientpusė klijų padengimo mašina OSAMA S2R-1300 Crsdpfex Tha Sex Abxsc Darbinis plotis: 1300 mm Min. / Maks. praėjimo aukštis: 0-90 mm Padengimo volelių skersmuo: 185 mm Padavimo greitis: 18 m/min Variklis: 0,37 kW Viršutinis griavėtas volelis Apatinis lygus volelis Voletai su nauja gumine danga

Būklė: naudotas, Gamybos metai: 2000, mašinos/transporto priemonės numeris: 2855, 2-ROLLER GLUE SPREADER OSAMA MOD. S2R1300 – 130 CM – CE COMPLIANT – USED - Glue loading accessory - Chiller (Thermal conditioner) Cooling system for vinyl, urea, polyurethane and other types of adhesives for 2- and 4-roller glue spreaders. This device is essential to maintain a constant glue temperature between rollers and to ensure preset pressing times, even under higher ambient temperatures, thereby guaranteeing end product quality. - CLT-A Mixer (Automatic two-component glue feeder) Cedpfjr Iyf Tsx Abxjrc Automatic mixing and feeding system for roller glue spreaders using two-component vinyl or urea glues with catalysts, sulfates, and isocyanates. This device is necessary for in-line or continuous operations with two-component glues that require mixing at the glue spreader's inlet. It features a mixing head mounted on the roller glue spreader, supplied by special glue and catalyst pumps. The pumps draw products directly from storage tanks and are managed by level probes installed on the rollers, thus always ensuring a constant glue supply. (s6+s7) - Automatic roller washer - No. 2 rollers - Voltage: 380/50 - Serial No.: 2855 - Year: 2000 - COMPLETE WITH MANUAL AND CE DECLARATION

Būklė: naujas, Gamybos metai: 2024, Magnetic separator for chip conveyor line Tube magnet with 4 magnetic plates (permanent magnet) Codpfx Abecqvhwoxjrc Hinged door for easy removal of metal parts Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Volelinis klijų užnešimo įrenginys OSAM S2R-1300 + lėkštinis stalas OSMA TDM Darbinis plotis: 1300 mm Csdpfjxrdv Dsx Abxorc Maksimalus darbinis aukštis: 100 mm Rankinis darbinio aukščio reguliavimas 2 klijų voleliai – viršuje ir apačioje Lėkštinis stalas OSAMA TDM 1300-3000 CE ženklinimas Komplekto pagaminimo metai: 2018

Būklė: naudotas, Gamybos metai: 2008, mašinos/transporto priemonės numeris: 21543, 2-ROLLER GLUE SPREADER OSAMA MOD. S2R1300 – CE CERTIFIED – USED Credpfx Abjr Ixy Ioxsc - Chiller (Thermal Conditioner) Cooling system for vinyl, urea, polyurethane, and other types of adhesives for 2- and 4-roller gluers. This device is essential to maintain consistent adhesive temperature between rollers and to ensure set pressing times even in high ambient temperatures, thereby safeguarding the quality of the finished product. - Mixer CLT-A (Automatic Two-Component Glue Feeder) Automatic mixing and feeding system for roller gluers using two-component vinyl and urea adhesives with catalysts, sulphates, and isocyanates. This device is necessary for in-line or continuous production, utilizing two-component glues that require real-time mixing as they enter the glue spreader. It includes a mixing head mounted on the roller gluer, fed by special adhesive and catalyst pumps. These pumps draw products directly from storage tanks, and level probes on the rollers automatically ensure a consistent adhesive level. - No. 2 rollers - Automatic roller cleaning unit - Voltage: 400/50 - Serial No.: 21543 - Year: 2008 - COMPLETE WITH MANUAL AND CE DECLARATION

Būklė: naudotas, mašinos/transporto priemonės numeris: 4/14242, Frank floor sanding machine FSR, used Crodob Auu Rspfx Abxjc Motor power: 0.75 kW Voltage: 230 Volts 5 Amps, 50 Hz, Machine no.: 4/14242 Dust bag Location: Ex stock Bitburg

Būklė: naudotas, Gamybos metai: 2000, mašinos/transporto priemonės numeris: 2852, 2-ROLL GLUE SPREADER OSAMA MOD. S2R1300, WORKING WIDTH 130 CM – CE CERTIFIED – USED - Glue feeding accessory - Glue cleaning accessory - Chiller (Thermal conditioner): Cooling system for vinyl, urea, polyurethane, and other types of adhesives suitable for 2- and 4-roller glue spreaders. This device is essential for maintaining a constant glue temperature between the rollers and for ensuring the set pressing times, even in high ambient temperatures, while preserving the quality of the finished product. Credpfx Ast U Iupsbxsc - Mixer CLT-A (Automatic feeding system for two-component glue) Automatic mixing and feeding system for roller spreaders using two-component vinyl and urea adhesives with catalysts, sulfates, and isocyanates. This device is necessary for in-line or continuous production processes where two-component adhesives require mixing at the entry of the glue spreader. It includes a mixing head mounted on the roller spreader, supplied by dedicated pumps for both glue and catalyst. The pumps draw directly from storage tanks, and level sensors positioned on the rollers ensure a constant glue level at all times. (s6+s7) - Automatic roller cleaner - 2 rollers - voltage: 380/50 - serial no. 2852 - year: 2000 - COMPLETE WITH MANUAL AND CE DECLARATION

Būklė: naujas, Gamybos metai: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with a 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with a 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Machine length: Machine width: Weight: Crjdpfjug Ty Hex Abxec