Konvejeris

opvoerband 15,5 meter

Gamybos metai: 2023, būklė: paruoštas naudoti (naudotas), Two Vecoplan drag chain conveyors are available. 1) VKU 800, year of manufacture: 2023, drive power: 5.5 kW, belt speed: 24 m/min, conveying capacity: approx. 120 m³/h, belt width: 820 mm, max. incline: 70°, section length: 10.2 m. 2) VKU 1100, year of manufacture: 2023, drive power: 11 kW, belt speed: 24 m/min, conveying capacity: 180 m³/h, belt width: 1150 mm, max. incline: 70°, section length: 22 m. Documentation available. On-site inspection possible. Gisdpfot Iw Rysx Agdsp

Būklė: naudotas, Gamybos metai: 2003, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 25 - 140 Throat depth: 460 mm Clearance between frame uprights: 590 mm Shut height: 690 mm Giedpfsvuun Tjx Agdep Table size: 1500 x 880 mm Pass-through opening in table: 950 x 250 mm Table height above floor: 900 mm Ram area: 870 x 725 mm Ram adjustment: 120 mm Drive power: 30.0 kW Weight: 32.0 t Space requirement approx. 2.34 x 2.38 x 3.99 m (L x W x H) Approved for manual loading operations and automatic operation in accordance with CE standards Equipped with infinitely variable drive, safety light curtain (manufacturer: Sick), hydraulic clutch/brake combination, hydraulic overload protection in the ram, automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, fixed table, pneumatic drawing cushion in the table (20 t), motorized central lubrication, operator panel with two-hand control Clear space between tie rods: 940 mm Side opening: 900 mm

Būklė: naujas, Gamybos metai: 2026, Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt Demonstration Machine Manufacturer: S&F GmbH Model: MFB-500/8 Belt width: 500 mm Axle distance (A-A): 8,000 mm Conveying capacity: approx. 30–40 m³/h (at 0° incline) Drive: Drum motor Gsdpsxk Tg Nofx Agdjip Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tension drum: Drum diameter 220 mm with spindle tensioning station Belt: Rubber steep-incline conveyor belt EP 250/2 2:1 with V-profile (32 mm) Machine weight: approx. 800 kg Machine colour: RAL 6011 reseda green Suitable, among others, for the following bulk materials: Potatoes, wood chips, sawdust and wood shavings, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, trimmings, and much more. Optional accessories: Feed hopper, internal belt scraper, chassis, drawbar, steel support, electrical installation (plug switch 16 A) Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt | Bulk Material Conveyor | Belt Conveyor | Inclined Conveyor Belt

Gamybos metai: 2014, būklė: labai geros būklės (naudotas), Spiral concentrator for separating minerals from slurry Type: K8LM5/2 Brand: SWMS - South West Metallurgical Services UK Year of manufacture: 2014 Condition: very good, was only used for a short period 2 units available Complete documentation (EN) available Gsdpfxjgak Hlo Agdoip

Gamybos metai: 2020, būklė: labai geros būklės (naudotas), buffer hopper with conveyor belt inside, equipped with a dosing auger at the front, length 9 meters, width 2 meters Gisdpeilqfqjfx Agdjp

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2013, veikimo valandos: 18 819 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 085 mm, pildymo angos ilgis: 2 815 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 100 mm, ryšulio aukštis: 800 mm, balo svoris: 400 kg, bendras plotis: 3 140 mm, bendras aukštis: 2 900 mm, bendras ilgis: 8 840 mm, bendras svoris: 7 380 kg, transporto aukštis: 2 900 mm, galia: 9 kW (12,24 AG), paskutinio kapitalinio remonto metai: 2023, transporto plotis: 2 400 mm, transporto ilgis: 5 650 mm, Good day, We hereby offer you a used baler manufactured by Strautmann, model BaleTainer. The following technical data has been taken from the manufacturer’s operating manual and brochures, for which we cannot guarantee the accuracy or completeness. Manufacturer: Strautmann Model: BaleTainer Year of manufacture: 2013 Gisdpfxot H Rgfe Agdjp Operating hours: 18,819 hours Number of bales pressed: 7,019 Main press force: 60 t Drive power: 9.2 kW Press machine weight: 7.38 t The baler has been partially overhauled. Piston rods and seal kits for the two main hydraulic cylinders have been replaced, and general maintenance such as oil and filter changes has been carried out. Following these overhaul works, the machine was tested. For loading, the press is equipped with a hydraulic tipping device for emptying mesh box containers at an HGV loading ramp. For example, the machine can be operated at a truck ramp with the tipping device. Employees can roll paper in a mesh trolley to the tipping device and then hydraulically tip it into the baler. Alternatively, the machine can also be loaded from the side via the large feed/storage hopper using a forklift or wheel loader. Conveyor belt feeding could also be implemented. The machine documentation is available in German. Inspection is possible by appointment at our workshop. We would be pleased if this machine is of interest to you. Your service team, Mertens & Frowein GmbH

Gamybos metai: 2023, būklė: naujas, Met geboute, gelaste en horizontale types worden silo’s gebruikt voor de opslag van cement, vliegas, bentoniet en andere stortgoederen. Gelaste silo’s Gelaste silo’s worden bij voorkeur gebruikt voor opslag met een lage capaciteit. Ze kunnen binnen 2 uur met één kraan worden gemonteerd en in bedrijf genomen. Deze uitvoering is ideaal voor lokale toepassingen waarbij transportkosten verwaarloosbaar zijn. Semix kan gelaste silo’s produceren met een capaciteit van 50 tot 150 ton. Geboute silo’s Geboute silo’s zijn populair vanwege hun compacte ontwerp ten behoeve van transport. Ze kunnen in containers worden vervoerd om transportkosten te besparen. Dankzij de modulaire constructie kan Semix geboute silo’s fabriceren met een capaciteit van 100 tot 2000 ton. Voor een correcte montage levert Semix een technisch opzichter bij iedere geboute silo. Semix heeft met succes geboute silo’s geïnstalleerd in Peru, Israël, Duitsland en het Verenigd Koninkrijk. Gjdpfx Aogavacsgdeip

Būklė: paruoštas naudoti (naudotas), Parduodu juostinius transporterus, matomus nuotraukose. Ilgis – 7,8 m. Juostos plotis – 0,4 m. Kaina nurodyta už vienetą. Kreipkitės dėl išsamesnės informacijos. Yra transportavimo galimybė. Giodpfxowv D T Ho Agdop

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, The subject of my auction is a 15-meter-long conveyor belt with a belt width of 0.8 meters. Possibility of transport. Godpfeqcuy Eex Agdsip

Būklė: naudotas, Gamybos metai: 2019, Overview This filler and capper for products such as hand sanitizer, liquids, lotions, and creams was manufactured in 2019 by the Chinese company Terry. The machine is in its original, unused condition and still in its original packaging. It has never been operated and is available immediately. Technical specifications - Filling volume range: 20–300 ml - Bottle shape adjustment range: ø25–70 mm (For diameters of 10–25 mm, an inverse mold can be used as needed. Products with diameters over ø70 mm can utilize custom molds for automated production.) - Filling accuracy: 20–100 ml, ±0.5 g; 101–300 ml, ±0.5% - Production speeds: - Products with 300 ml capacity: ≥15 bottles/minute Giodpfxjunn Tro Agdjp - Products with 200 ml capacity: ≥20 bottles/minute - Products with 100 ml capacity: ≥35 bottles/minute - Products with 50 ml capacity: ≥40 bottles/minute (All values based on water as the medium.) - Products with 150 ml capacity: ≥20 bottles/minute (All values based on cream as the medium.) - Air pressure supply: 0.6–0.8 MPa - Air consumption: 200 L/min