Gręžimo staklės

OPTIMUM OPTImill MZ 4 SV

Sąlyga: geras (naudotas), Gamybos metai: 2001, šlifavimo ilgis: 650 mm, šlifavimo plotis: 525 mm, bendras aukštis: 350 mm, stalo ilgis: 600 mm, stalo plotis: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric / US Standard X-axis travel: 650 mm Y-axis travel: 525 mm Z-axis travel: 350 mm Table length: 600 mm Table width: 350 mm Table load capacity: 400 kg X-axis feed rate: 35,000 mm/min Z-axis feed rate: 1,000 mm/min Grinding wheel dimensions: 300 x 50 x 76.2 mm Power: 3.7 kW Speed: 2,800 rpm Dimensions (approximate) Length: 3,200 mm Njdpfx Ajvdal Aef Iekt Width: 2,000 mm Height: 2,870 mm Weight: 2,300 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, this does not constitute representation or contractual terms. We recommend verifying all critical details.

Sąlyga: naudotas, Gamybos metai: 1986, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Very well-maintained machine. The machine comes from a precision grinding workshop in the Black Forest. Still under power at the previous owner’s site and can be inspected for a short time. In 2022, the machine underwent a partial overhaul and servicing at our facility, including restoration of the geometry to manufacturer's specifications. Equipment: Njdpfx Afev Tqqns Iokt - 2-axis FAGOR digital readout - Sine bar - Tailstock with fine adjustment - Hydraulic tailstock - Face grinding attachment - Internal grinding attachment - Fischer UJ70 internal grinding spindle - Paper band filter - Automatic cycle: roughing - finishing - spark-out - retraction

Sąlyga: geras (naudotas), 16 external turning tool holders Nsdpjikn E Hofx Af Iokt 41 internal turning tool holders

Sąlyga: naujas, Optimum OPTImill MZ 2S Universal Milling Machine Nkedpfx Aefnh Sgef Ijt Equipped with digital 3-axis position display DP 700 from NEWALL. The feed axes are inverter-controlled via the operating panel. Wide Range of Applications Excellent damping characteristics and chassis stability All guideways hardened and precision ground, adjustable via gib strips Automatic feed on X, Y, and Z axes, infinitely variable through an electronic joystick on the control panel Electrical feed limit switch-off Ball screw drives on all axes Central, clearly arranged control panel with integrated digital position and speed display Heavy-duty cross table, generously sized and precision-machined with 5 T-slots Coolant system Large, scaled handwheels Machine lamp Smooth operation Manual central lubrication TECHNICAL DATA Dimensions and Weights Length (product): approx. 1239 mm Width/Depth (product): approx. 1168 mm Height (product): approx. 1900 mm Weight (net): approx. 1400 kg Drilling/Milling Head Milling head swivel range: ± 90° Drilling/Milling Capacity Max. cutter head size: 100 mm Drilling capacity in steel (S235JR): 30 mm Continuous drilling capacity in steel (S235JR): 26 mm Max. end mill size: 25 mm Electrical Data Drive motor power: 2.2 kW Connection voltage: 400 V Power supply frequency: 50 Hz Horizontal milling table Horizontal table length: 750 mm Horizontal table width: 320 mm Vertical spindle to horizontal table min.: 75 mm Vertical spindle to horizontal table max.: 410 mm Horizontal table T-slot size: 14 mm Horizontal table T-slot number: 5 Horizontal table T-slot pitch: 63 mm Horizontal spindle to horizontal table min.: 70 mm Horizontal spindle to horizontal table max.: 400 mm Horizontal table max. load: 285 kg Vertical milling table Vertical table length: 830 mm Vertical table width: 250 mm Vertical table T-slot size: 14 mm Vertical table T-slot number: 2 Vertical table T-slot pitch: 63 mm Coolant System Coolant pump drive power: 95 W Travel Manual X-axis travel: 400 mm Manual Y-axis travel: 200 mm Manual Z-axis travel: 335 mm Automatic X-axis travel: approx. 310 mm Automatic Y-axis travel: approx. 160 mm Automatic Z-axis travel: 295 mm Vertical Spindle Vertical spindle reach: 100 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 50 – 1890 rpm Vertical spindle number of speed steps: 12 steps Vertical spindle drawbar: M16 Vertical spindle quill travel: 120 mm Vertical spindle max. torque: 1100 Nm Feed Rate Feed speed X-axis: 10 – 600 mm/min Feed speed Y-axis: 10 – 600 mm/min Feed speed Z-axis: 10 – 600 mm/min Electrical Connection Total connected load: 4 kW Motor(s) Rapid traverse X-axis drive power: 0.375 kW Rapid traverse Y-axis drive power: 0.375 kW Rapid traverse Z-axis drive power: 0.375 kW DELIVERY INCLUDES: Adapter ISO 40/MK3 Sleeve MK1 and MK2 Horizontal milling spindle Ø 27 mm Operator's toolkit

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Berstorff dviejų sraigtų ekstruderis ZE (CL) 25 Techniniai duomenys: • Pagaminimo metai: 1997 • Variklio galia: 11,6 kW • Šildymo galia: 16 kW Nodpfxow Iqhme Af Ijkt • Sraigtų apsukos: 500 aps./min. Sraigtas: • Vienkrypčio sukimosi dviejų sraigtų ekstruderis, 2 × 25 mm × 30 D • Modulinių elementų konstrukcija (sraigto segmentai) • 2 × nuorinimo zona • K-TRON dviejų sraigtų dozatorius Valdymas: • Klasikinė kontaktorių valdymo sistema • Elektros spinta integruota į mašinos korpusą • Atskiras valdymo pultas su valdymo skydeliu • Skaitmeniniai indikatoriai (temperatūra ir masės slėgis), taip pat įvairūs kontroliniai indikatoriai Kita: • Mašina prijungta ir paruošta bandymui • Bandymas galimas pagal susitarimą

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1994, The press brake was manufactured in 1994. The working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Working length: 1250 mm Pressing force: 600 kN Weight: 4000 kg Nedpfx Afep R Irce Iokt Power: 10 kW

Sąlyga: beveik kaip naujas (naudotas), Donau Donauflex 135 greita radialinė gręžimo staklė Gamintojas: Donau Tipas: Donauflex 135 Nkjdpfxjxcyz Ro Af Iet Pagaminimo metai: 2020 Būklė: Labai gera, naudota, bet kaip nauja Iš karto pristatoma iš sandėlio.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Parduodama naudota Kellenberger apvalaus šlifavimo staklė labai geros būklės. Kaina ženkliai sumažinta !!!!! Nedpfow Dzbdox Af Iskt

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, TECHNICAL SPECIFICATIONS Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distance Between T-slots: 65 mm From spindle centre to underside of counterholder: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal: 4000 mm/min Cross: 4000 mm/min Nkedjwuurwopfx Af Ijt Vertical: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swivelling: 0-140° Spindle feed Quill diameter: 90 mm Quill travel: Manual Feed: 75 mm Weight: Approx. 2300 kg SCOPE OF SUPPLY Includes, among others (list not exhaustive): ABENE milling machine Heidenhain control Toolholder set Coolant pump Levelling feet Mounting block Complete operating documentation Exact scope of supply according to photo series.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1988, - Completely overhauled in 2022 - Heidenhain TNC320 CNC control system - CNC or manual operation possible - Movable vertical milling head with extendable spindle - Counter support for long milling arbors - Hydraulic tool clamping - Automatic gear transmission - Automatic clamping on X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measuring - Collision protection coupling on the Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools & tool cart Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (cross): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually adjustable on spindle headstock: 150 mm Main drive: - Pole-changing three-phase brake motor: gearbox with forward/reverse operation - Power: 3.7 / 4.4 kW - Working spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: disc spring pack - Tool release: hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z axes: 1 DC motor Nsdpfx Afewhk Ubo Iskt - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Required space (including safety area): approx. 2300 x 2500 mm - Machine weight incl. vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor loading: 3000 kg/m²