Automobilių gabenimo furgonas

OPEL Movano Autotransporter Voll - Aluminium 480x210

Būklė: naudotas, Gamybos metai: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery (flow rate): up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Chicago Pneumatic CPVR15 CE screw compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications—this compressor reliably supplies the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Application: workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigerant dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - oil-water separator Fpsdpfx Aeh A Sfdehwsd Technical data taken from publicly available sources.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 800 h, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 1 400 mm, bendras aukštis: 2 300 mm, bendras plotis: 250 mm, ruošinio svoris (maks.): 72 kg, Parduodama beveik nauja automatinė miltelinio dažymo linija, sumontuota 2023 m., dirbusi apie 800 val. Išdėstymo plotas (kaip yra): apie 12 x 28 m, aukštis 5 m. Kaina ir demontavimo terminas priklauso nuo individualių susitarimų. Išdėstymą galima keisti, pridėti priešapdorojimo tunelius, o krosnį pastatyti kaip tiesų tunelį net ir 6+ m ilgio detalėms. Galime pasiūlyti pilną kainą su demontavimu ir transportavimu į kitą šalį pagal atskirą susitarimą. Puiki galimybė įsigyti praktiškai naują liniją už mažesnę kainą ir greičiau nei naują. Monorėlinis konvejeris: - greitis 0,9–3,3 m/min - automatinis tepimas Fpedpfex H Tadsx Ahwed - automatinis tempimo mazgas - grandinės žingsnis 270 mm - bendras ilgis 131 m - maksimali apkrova 9500 kg - plieninės atramos tarp grindų ir konvejerio Automatinė miltelinio dažymo kamera Gema: - PVC kamera MagicCompact EquiFlow BA04 - valdymo pultas MagicControl 4.0 - fotoląstelinė rėmo ginklų valdymui - 16 x OptiGun GA03-P automatiniai purkštuvai - 1 x OptiSelect GM04 rankinis purkštuvas - 17 OptiSpray AP01.1 dažų padavėjų siurbliai - OptiCenter OC07 miltelių padavimo sistema - Ultragarsinis sietas US07 OptiCenter - 2 vnt. ZA07-23 rekuperatoriai su X ašies automatiniu valdymu - MonoCyclone EZ05-16, 16 000 m³/val. - Dulkių filtras 16 000 m³/val., 30 kW - Didmaišių sistema atliekų milteliams - CO₂ sprogimų apsaugos sistema - Rankinio dažymo siena / vežimėlis nuotraukose NEĮTRAUKTAS Miltelinis kietinimo krosnis: - Hibridinis šildymas: elektros arba dujų! Retai pasitaikantis lankstumas pasirinkti pigesnį energijos šaltinį. - 300 kW įrengtoji galia - Maksimali temp. 220°C - Siemens PLC valdymo pultas

Gamybos metai: 2020, būklė: naujas, ROMER manipulators are distinguished by their quiet operation. They can handle both simple, common processes as well as complex, multi-dimensional tasks. Programming is performed via a PLC control system. Capable of operating with both long and short strokes. The toothed belt drive ensures quiet running. Maintenance-free AC motor. Slim column design saves space. The robust construction of the manipulators provides high versatility and stability. Fpjdpfx Aef Aad Nshwsd The manipulator is equipped with a 7" touch panel or can be controlled externally via the ModBus protocol using RJ45 cables.

Būklė: naudotas, rida: 67 189 km, galia: 84 kW (114,21 AG), pirmoji registracija: 03/2017, kuro tipas: dyzelinas, bendras svoris: 3 000 kg, spalva: mėlyna, pavaros tipas: mechaninis, emisijos klasė: Euro 6, sėdimų vietų skaičius: 3, Gamybos metai: 2017, Įranga: ABS, autonominis šildytuvas, centrinis užraktas, elektroninė stabilumo programa (ESP), suodžių filtras,

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Fjdpfefz I D Dox Ahwopd Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). Fodpfx Ahsfz Nb Tjwjpd - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 1990, būklė: labai geros būklės (naudotas), Manufacturer: KOJA Year of manufacture: 1990 Power: 200 kW, 370 A Speed: 1485 rpm Air delivery: approx. 100,000 m³/h Inlet side: Diameter: 800 mm Outlet side: 800 x 620 mm Impeller diameter: 1800 mm Casing dimensions: 3400x3100x2400 mm Fpodpsrgqm Hofx Ahwjd Net weight with motor: approx. 4.5 t Aerodynamic control with inlet guide vanes, grease-lubricated rolling bearings. The machine can be disassembled and transported with a standard truck.

Būklė: geras (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, PASSPORT™ Automatyczny Wyładowywacz do Koszulek Fsdsqvmkdopfx Ahwopd - automatyczny wyładowywacz do tekstyliów - w pełni sprawny - mało używany

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, rida: 20 km, galia: 132 kW (179,47 AG), pirmoji registracija: 10/2025, kuro tipas: dyzelinas, tuščias svoris: 2 600 kg, didžiausias leistinas svoris: 900 kg, bendras svoris: 3 500 kg, ratų bazė: 4 100 mm, kita apžiūra (TÜV): 10/2027, kuras: dyzelinas, kuro bako talpa: 100 l, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas, sėdimų vietų skaičius: 3, krovinio erdvės tūris: 25 m³, krovimo vietos ilgis: 4 900 mm, krovinių skyriaus plotis: 2 200 mm, krovos erdvės aukštis: 2 300 mm, Gamybos metai: 2025, Įranga: ABS, automobilio registracija, autonominis šildytuvas, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kruizo kontrolė, oro kondicionavimas, oro pagalvė, papildomi žibintai, priekabos jungtis, priešrūkiniai žibintai, spoileris, sunkvežimio registracija, suodžių filtras, trauki kontrolė, vairo stiprintuvas, vasarinės padangos,

Būklė: naudotas, rida: 74 134 km, galia: 130 kW (176,75 AG), pirmoji registracija: 11/2021, kuro tipas: dyzelinas, bendras svoris: 7 490 kg, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, sėdimų vietų skaičius: 3, krovimo vietos ilgis: 7 270 mm, krovinių skyriaus plotis: 2 480 mm, krovos erdvės aukštis: 2 510 mm, Įranga: ABS, elektroninė stabilumo programa (ESP),