Omal Insert Lygis 3

Omal Insert Livello 3

Būklė: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 Gedegwbbqepfx Apyjuh No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Gamybos metai: 2010, būklė: geras (naudotas), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: Guodpfshknbrex Apyeh 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Full protection of the working head and machine work area - Numerical control (controller) with BIESSE Works software running on Windows - Vertical positioning of panels, with 2 panel clamping grippers - Panel feed (in X-axis direction, on the lower rubber wheel support), movement (on X-axis) of the panel/table clamping grippers WORKPIECE DIMENSIONS (WORKING RANGE): - Length Min 160 mm / Max 3200 mm - Width Min 35 mm / Max 900 mm - Thickness Min 8 mm / Max 80 mm WORKING UNITS: - No. 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18,000 RPM) - No. 1 circular saw (for grooves) diameter 120 mm (fixed on X-axis) - No. 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - No. 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - No. 1 hinge drilling head unit - Total installed power 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH FACES WITH PRESSURE PUMP FOR GLUE APPLICATION.

Būklė: naujas, Gamybos metai: 2026, CNC gręžimo ir kaiščių įkalimo automatas, skirtas pilnai automatiniam gręžimui, klijavimui ir kaiščių įkėlimui. Gręžimo ir kaiščių apdirbimo centras pasižymi kompaktiškumu, efektyvumu, kokybe ir lankstumu. Trumpas pristatymas: Gsdpfxedx Axfs Apyjuh • Universalus CNC valdomas gręžimo ir kaiščių įkalimo įrenginys • Klijų įpurškimo kontrolė per GIC • Uždara klijų sistema • Tinka plokščių ir masyvo apdirbimui • Papildomos horizontalios ir vertikalios gręžimo galvutės – pasirinktinai • Palengvina CNC apdirbimo centrus • Optimali papildoma įranga nestingo staklėms

Būklė: labai geros būklės (naudotas), PANEL SAW ANGLE SYSTEM Control: OSI Plus - Optiplanning Software Gusdpeukhd Asfx Apyjh No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lift table (mm): 4500 x 2200 1st pusher saw with 5 grippers Rotating device (for panels) up to 90° 1st panel saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd pusher saw with 10 grippers 2nd panel saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air cushion tables (mm 2200 x 1500) Automatic unloader (bridge) for cut panels: "RBO (BIESSE)" model Lifter with no. 6 stacking positions

Gamybos metai: 2001, būklė: naudotas, • Heating plate size (mm): approx. 1500 x 2700 • Max. usable area (mm): 1250 x 2450 Godokt N Hujpfx Apyouh • Loading side (mm): 1500

Būklė: naudotas, Gamybos metai: 2018, 1 unit CNC-controlled drilling, gluing and dowel inserting machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz, complete in standard configuration with: - Linear guide support consisting of: 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. reinforced blow-out, gluing and dowel inserting station for 8 mm diameter dowels, dowel length 30 mm - Fully automatic, electronically controlled centralized lubrication - X-axis NC controlled, with working length 1,300 mm, max. travel speed 78 m/min - Z-axis, position programmable over support table 5-40 mm, with option for NC-controlled Z-axis - Dowel insertion projection 7-20 mm, programmable with option of NC-controlled Y-axis Drilling depth from 0-35 mm (with drill length total 70 mm) is automatically set with dowel protrusion - Enclosed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 liters of water - Indicator lamp for glue level in glue container - 1 pc. side fence left, 1 pc. side fence right, and 1 pc. center fence (all removable) Guodpfxoxwaz Hj Apyjh - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10°, for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection diameter 80 mm - 1 pc. TCT control with: integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" resistive TFT industrial touchscreen display, 1024 x 768 resolution, 2 GHz CPU, 256 MB RAM, 2x network interfaces, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensioning, automatic workpiece mirroring and process optimization, 4 work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point shifting, programmable job lists, plain text error diagnosis OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional vertical angled clamping cylinders 10° with bracket (total 8 clamping cylinders) - Surcharge for machine bed length 1,800 mm with working length 1,800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm (Standard working length not reduced) - 1 NC-controlled Y-axis, with ballscrew and dynamic travel speed 300 mm/sec. Via software, programmable dowel insertion projection 7-30 mm and drilling depth 0-42 mm (with drill length total 77 mm) for vertical drilling unit from above, Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis position 5-62 mm instead of 5-42 mm - Surcharge for: 1 vertical drilling unit from above, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm, Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K

Būklė: naujas, Gamybos metai: 2026, CNC gręžimo ir kaiščių įstatymo automatas, skirtas visiškai automatiniam gręžimui, klijavimui ir kaiščių įstatymui. Gręžimo ir kaiščių apdirbimo centras, pasižymintis kompaktiškumu, efektyvumu, kokybe ir lankstumu. Trumpas pristatymas: • Universalus CNC valdomas gręžimo ir kaiščių įstatymo įrenginys • Klijų padavimo kontrolė per GIC • Uždara klijų sistema • Tinka plokščių ir masyvo apdirbimui • Papildomos horizontalios ir vertikalios gręžimo ašys kaip pasirinkimas Gsdpfx Aedx R Dfopyjuh • Atlaisvina CNC apdirbimo centrus • Optimalus priedas nesting staklėms

Būklė: naudotas, mašinos/transporto priemonės numeris: 008005, Didžiausias apdorojamas plotis: 2440 mm Gedjwu Aacspfx Apyouh

Būklė: naudotas, Gamybos metai: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for the 1st and 2nd pass of the panel Godpfepp Tkfox Apyeuh Motorized mobile shoulder opening by N.C., mm 3000 Maximum panel height: 60 mm PVC-ABS edge thickness: 3 mm Feed speed: 40 m/min Feed speed with corner rounding: 20 m/min Motorized rubber pressure belt Guide rail with retractable pin (distance between pins: 500 mm) Squaring unit consisting of: - Anti-adhesive unit - Timer-controlled automatic anti-chip unit - Double scoring unit - Spare space for each group extension Glue unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlap cutting unit Corner rounding unit (FK rounding group) Edge scraper unit Glue scraper group Brush unit Anti-adhesive unit

Būklė: naujas, Gamybos metai: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard version with: - Support with linear guidance consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for 8 mm Ø dowels, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traverse speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position over table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth from 0–35 mm (with drill length GL 70 mm) automatically set with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity of 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for rinsing glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 liters water - Indicator lamp for glue level display in glue container - 1 pc. left side fence, 1 pc. right side fence (both removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic inclined clamping cylinders 10° for workpiece thickness up to max. 80 mm, minimum workpiece length (Y) 70 mm - 1 pc. suction hood, connection Ø 80 mm - 1 pc. TCT control with: Built-in industrial PC incl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, Gusdpfx Apew Sgm Hoyjh 15" capacitive TFT industrial touchscreen display, Operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-driven user software, drilling positions freely programmable with ABSOLUTE, RELATIVE or GRID dimensions, automatic workpiece mirroring and operation optimization, two workzones programmable with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, plain text error diagnostics - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle Art. no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots prior to the start of the work program (drilling/gluing/dowel insertion). E.C.S. for 1 pc. glue nozzle Art. no. 0471-Z010 - 1 single-spindle vertical drilling unit, drilling from above, 0.65 kW (3000/5000/8000 rpm), Y-position manually adjustable via mechanical digital counter from 5–40 mm, max. drilling depth (Z) 30 mm (with drill length GL 57 mm). Max. workpiece thickness (Z) 50 mm, minimum workpiece length (Y) 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) Art. no. 0471-0830 - 4 vertical inclined clamping cylinders 10° with holder, additional, Art. no. 0470-0850 Available: at short notice