Pirštų sąnarių linija

NKT DP 205/600/1000

Sąlyga: naujas, Wood dryers of all capacities. Proprietary technology with over 70 years of experience. More than 500 machines worldwide. Equipment for ISPM-15 treatment. Cajdpfok D S Npjx Admja

Gamybos metai: 1980, Sąlyga: paruoštas naudoti (naudotas), An old Brunner drying chamber (approx. 40 years old) is available. External dimensions (X/Y): approx. 6000mm/8000mm. An on-site inspection is possible. Cajdpfovbigwex Admea

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Set for producing finger-joint connections for medium and large-scale production. Cedpfxelu D Tfj Admjaa The machine is technically efficient and in good condition. The set includes several tool kits. Characteristics: – Industrial set with one tenoner. Batch feeding under operator supervision enables processing of lower grade raw material as well, – Operation controlled by microprocessors (automatic control), – Batch rotation after each operation on a rotary table (straight finger-joint connection) or tilting the batch rearward (furniture joint on a line; unique GOMA solution), – The set includes an automatic loading station for the press, – Possibility to use mid-cutting on the press, TENONER WITH FEED TABLE Specification Values Milling spindle diameter 50x210 mm Spindle speed 6000 rpm Motor 18.5 kW Tool dimensions 250x160 mm Saw spindle for end trimming Special chipper 300x8 mm Motor 6 kW / 3000 rpm Stepless feed table Working width x height 600 x 30-160 mm Glue nozzle outline according to tool FC-10 PZ6/2 PRESS Specification Values Board width 30-160 mm Board thickness 20-70 mm Finished board length 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic pump 3 kW / 140 bar

Sąlyga: labai geros būklės (naudotas), Circular saw flat motor KATT 11 kW / 1450 rpm, flange diameter 200 mm, right-hand thread, secondary shaft stub for hydraulic pump drive with 150 mm Ø pulley, tested and newly fitted with bearings Cedpfxjh D Rt As Admoaa

Gamybos metai: 2013, Sąlyga: naudotas, Drying chamber / Recirculating air drying chamber / Wood drying kiln / Drying system Mühlböck VLSM2120 External dimensions: Length: 7.1 meters Casdpfxewpfwys Admoa Width: 4.4 meters Height: 5 meters Internal dimensions: Length: 6.4 meters Width: 3 meters Height: 4.2 meters Technical specifications: Year of manufacture: 2013 Heating capacity: 102 kW Flow temperature: 90°C Water flow: 6 m³/h Electrical connection load: 4 kW Fans: 3 x 1.1 kW Optional with wood chip heating system

Sąlyga: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 220992, STROMAB CROSSCUT SAW WITH ELECTRONIC PUSHER MOD. TR 500 MATRIX – CE STANDARDS – USED - infeed roller table and MATRIX electronic pusher 6000mm - outfeed table 1500mm - 10 HP motor - blade diameter: 500mm - blade rotation speed: 3500 rpm - maximum cutting capacity: 360 mm (W) x 55 mm (H); 200 mm (W) x 135 mm (H) - minimum cutting section: 20 (W) x 10 (H) mm - ELCO CNC control - 415 volt - s/n 220992 Csdpfx Adot U I A Homjaa - year 2002

Gamybos metai: 2023, Sąlyga: naujas, Maximum chipping height: mm 200 Feed width: mm 500 Feed rollers: pcs. 3 Rotor diameter: mm 600 Chipping length approx.: mm 20–30 Output capacity: 16–20 rm/h wood chips Chipping knives: pcs. 2 Feed motors: kW 2x2.2 Net weight approx.: kg 4100 Feed: horizontal Machine frame: steel, shielded gas welded Cajdpfxsncd Aze Admoa Rotor: steel, shielded gas welded, dynamically balanced Bearing: Oversized roller bearings Bearing housing: steel flange housings Feed rollers: steel, specially toothed Chip discharge: below the machine Screen: (sieve) for re-shredding overlength material Drive pulley: matched to main motor N=1500 min-1 Hydraulic system: consisting of hydraulic pump, membrane accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Sąlyga: naujas, Gamybos metai: 2025, Drum Chipper Series ATH 300 S&F chipping machines and drum chippers with horizontal feed are used in various sectors of the wood processing industry (sawmills, wood mills). Chippers of the "ATH" series produce high-quality and homogeneous wood chips from residual wood with a low proportion of fines, for example as quality wood chips for the pulp industry or as fuel chips for energy production. Series ATH 300 - Infeed height: 300 mm - Infeed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pcs - Number of counter knives: 2 pcs - Rotor diameter: 700 mm - Number of infeed rollers: 3 pcs - Throughput capacity: up to approx. 70 stacked cubic meters/h * - Chip length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Infeed roller drive power: 2 x 3.0 kW - Operating / control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chip length, main motor kW, number of knives, and material feed Advantages: - Maximum throughput - Minimal fines content - Low maintenance - Versatile application Casdpfx Adsuz Hmxomsa - Custom manufacturing Need further information? Contact us! We’ll be happy to advise you. Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Crusher

Sąlyga: naudotas, Gamybos metai: 2004, WEINIG GRECON FINGER JOINT LINE DOUBLE END MODEL PJ 150/500 – CE – USED - Infeed wood length: 150 – 700 mm - Wood width: 40 – 150 mm - Wood thickness: 18 – 80 mm - Press length: 6100 mm - Pressing force: 120 kN Cjdpfx Ajwry I Esdmeaa - Milling motor: 15 kW - Scoring unit: 5.5 kW - Year: 2004 CE

Sąlyga: labai geros būklės (naudotas), Optimising cross-cut saw GreCon type 2004 with infeed cross conveyor with outfeed conveyor belt featuring 4 ejectors with chain bed Technical specifications: Max. workpiece width: 250 mm Max. workpiece thickness: 80 mm Saw blade diameter: 450 mm Cutting speed: 90 m/sec Saw motor: 5.5 kW Saw shaft control: pneumatic Chain drive: servo motor Min. working width: 40 mm Min. infeed length: 500 mm Cajdpfjn Hwl Aex Admea Net weight: approx. 1,800 kg Was completely overhauled and not used afterwards Location: Austria, near Ried im Innkreis