Padėklų stelažų statramsčiai Padėklų stelažų lentynos

Nedcon AS/ 3.200 x 900 mm/ Rahmenprofil: 100 x 68 x 2.0 mm

Būklė: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) Cgedpfx Absgwbbqj Teu No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Gamybos metai: 2008, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 431808, Ref. No. 18177 Hydraulic flat, profile, and bar steel shear with notching device and punch Technical Specifications: - Flat steel shear cuts up to 375 x 10 mm - 220 x 20 mm - Profile steel shear cuts L-angle steel at 90° up to 130 x 13 mm Cgedpfx Asmidyijb Teu - Bar steel shear cuts round steel up to 45 mm - square steel up to 45 mm - Notching device with square notching unit 100 x 42 x 10 mm - Punching unit – Punching force 600 kN – with gauge table – Throat depth 300 mm – punches in steel up to 28 mm Ø in 15 mm or 34 mm Ø in 12 mm - Manual length stop - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Būklė: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness with veneer strips (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, without transmission bar (Master & Slave systems) Stop cams retractable, distance (mm): 1080 FORMAT PROCESSING (per side): Protective cutter (pre-milling) 75.186 (1 x kW 4.4) Chipping unit (2 x kW 8) Jointing milling unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): Gluing unit (hot melt adhesive) 283.1513 04.1570 + 283.205 Edge pressure zone – edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270° Cgodpsd Nt Rqsfx Ab Teu

Būklė: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Working width (min/max): 236 / 1300 mm Control/Software: ICOS Open Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free position Cgedpedh Tfgefx Ab Tsu EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Edgeband magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flush trimming unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free position

Gamybos metai: 1998, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 0159488169537, Offer 23293 Technical Data: Cjdpfx Aspuy H Dsb Togu - Pressing force: 300 kN - Punching capacity, e.g.: up to 30 mm Ø in steel: 9 mm - or with special punching device: up to 100 mm Ø in steel: 2.5 mm - Stroke, infinitely adjustable: 0 to 28 mm - Strokes per minute: 26 to 36 1/min - Throat depth: 610 mm - Installation height: 240 mm - Drive: 400 V / 4 kW - Space requirement approx.: W 750 x H 1650 x D 1350 mm - Weight approx.: 1300 kg - with: - Foot switch - Center punch locating device - Support table with folding stops, W 1100 x D 850 mm - Stop adjustment paths from center of punch - Width between left and right approx. 470 mm x D 510 mm

Būklė: labai geros būklės (naudotas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in a line alongside other machines. Control system: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal drilling support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Csdpfxeh Ryhns Ab Togu Drilling units per lower vertical drilling support (qty): 2 Spindles per unit of lower vertical drilling supports (qty): various Upper vertical drilling supports (qty): 2 Spindles per unit of upper vertical drilling supports (qty): 2 Spindles per unit of upper vertical drilling supports (qty): Upper vertical workpiece clamps (qty): 6 Chip removal conveyor Digital display of axis position data Total connected load (kW): 26

Būklė: naudotas, 🧰 Produkto ypatybės • Gamintojas: Palflex • Būklė: naudota • Spalva: oranžinė • Aukštis: 400 cm • Gylis: 110 cm • Lentynos apkrova: 24000 kg • Sijos ilgis: 410 cm • Vienos lentynos sluoksnio apkrova: 3000 kg Pasiūlyme yra: • 11 vnt. iš anksto sumontuotų rėmų, gylis 110 cm, aukštis 4 m • 40 vnt. sijų, ilgis 4,1 m, apkrova 3000 kg/sėdynė • 80 vnt. įkabinimo saugos Codjvfnqvepfx Ab Tsgu • 44 vnt. betoninių inkarų • 1 vnt. apkrovos lentelė kiekvienai stelažo eilei Naudoti kampų apsaugai galimi iš karto, kaina už vienetą 15 € + PVM! Daugiau priedų rasite priedų kataloge. 💰 Kaina: 2 790 € be PVM • Nuolaida už kiekį: pagal užklausą • Pristatymo išlaidos: visoje Europoje pagal užklausą • Pristatymo laikas: galima pristatyti iš karto • Apžiūra ir atsiėmimas: bet kada pagal susitarimą Nuolat sandėlyje turime virš 5000 bėginių metrų palečių stelažų iš įvairių gamintojų (Pasikeitimai ir klaidos techniniuose duomenyse, aprašymuose ir kainose bei tarpinis pardavimas galimi! Žiūrėkite mūsų bendrąsias sąlygas. Visos kainos be PVM ir iš sandėlio.)

Būklė: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse transversely movable by 180° (horizontal) - Console table with vacuum clamps Codpfx Abed Tyvxs Tjgu - Internal lifting platform with motorized sheet metal roller conveyor - Front protective fence, movable - Separate control cabinet and operator panel - External roller conveyor for stacking panels from destacking unit - External driven roller conveyor from destacking unit, also with belt for transfer at 90° angle of the panels - Operating capacity (cycles/min): 12-15 - Panel thickness (min/max) mm: 10 - 40 - Min. panel dimensions mm: 250 x 320 - Max. panel dimensions mm: 1200 x 3000 - Total connected load kW: 11

Būklė: labai geros būklės (naudotas), rida: 561 km, galia: 368 kW (500,34 AG), pirmoji registracija: 06/2024, kuro tipas: dyzelinas, ašių konfigūracija: 8x4, ratų bazė: 5 100 mm, kuras: dyzelinas, kuro bako talpa: 400 l, stabdžiai: variklio stabdymas, spalva: balta, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2024, Įranga: ABS, AdBlue, centrinis užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, kranas, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priešrūkiniai žibintai, spoileris, suodžių filtras,

Būklė: labai geros būklės (naudotas), COMPLETE 4-SIDED EDGE PROCESSING AND EDGEBANDING LINE, max. working width 2500 mm, equipped with automatic feeding and stacking system, comprising the following machines: X04004A) Loading portal (with 2 loading stations) "BARGSTEDT" TBH 500/D/30/14 Cgjdpfx Aslikvhsb Teu X04004B) Rotating device (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDR31/25/12 X04004C) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for finished cut) X04004D) Separation station "BARGSTEDT" X04004E) Double-sided sizing and edgebanding machine "HOMAG" Model KFR 620/19/QA/25 X04004F) 1st drilling machine "WEEKE" Model BST 500 D X04004G) 2nd drilling machine "WEEKE" Model BST 500 D X04004H) Rotating device (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for finished cut) X04004M) Stacking portal (with 2 unloading stations) "BARGSTEDT" Model TSP 420/40/30/12 BA