Mechaninė daugiafunkcinė presas

NAVA 2MI1600DE/SE

Sąlyga: naudotas, Gamybos metai: 1997, Pressing force: 315 t Adjustable stroke: 30 - 100 mm Ram adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table clamping surface approx.: 1600 x 1100 mm Ram clamping surface approx.: 1600 x 1100 mm Pass-through opening in table: 600 x 180 mm Strokes per minute: 15 - 180 min-1 Table height above floor: 1200 mm Power requirement: 170 kW Height above floor approx.: 4900 mm Dimensions LxWxH: 4900 x 1900 x 4900 mm Machine weight approx.: 55 t Standard equipment The press was retrofitted to CE standard in 2015. The press has been upgraded to a SIEMENS S7 control system. The coil line is still equipped with a SIEMENS S5 control system. Additional equipment Stroke bars in the press table Automation KEMMERICH coil line consisting of: Decoiler: Load capacity: 5 t Kledpsuqd Tmofx Af Iol Straightening machine: Roller diameter: 70 mm Strip width: 300 mm Roller feeder: Roller diameter: 160 mm Feed length: 0.1 - 9,999.9 mm Strip width: 30 - 350 mm Material thickness: 0.2 - 10 mm Material cross-section: 1,500 mm² Feeding accuracy: +/- 0.05 mm Loading stand

Sąlyga: naudotas, Gamybos metai: 1988, Pressure: 400 t Clearance between uprights: 1100 mm Stroke: 250 mm Stroke rate: 25 - 75 spm Distance table/ram, max. stroke top, adj. top: 900 mm Table area: 1100 x 965 mm Ejector force in table: 30 t Ejector stroke in table: 80 mm Ejector force in ram: 3 t Ejector stroke in ram: 60 / 70 mm Ram area: 980 x 800 mm Side clearance between uprights: 800 mm Ram adjustment: 20 mm Drive power: 80.0 + 5.5 kW Weight: 47.0 t Space requirement (W x D x H): 3.5 x 3.3 x 6.0 m Control cabinet weight: 1.4 t Control cabinet dimensions (W x D x H): 4.9 x 0.5 x 2.6 m Kodpfx Afsvuukne Ioll Multi-stage cold extrusion press with linkage drive with steplessly adjustable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in ram, motorised ram adjustment, pneumatic compensating cylinder in the press frame, table ejector – cam-controlled (30 t / 80 mm), pneumatic ejector in ram (3 t, 60 mm), motorised central lubrication Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system.

Sąlyga: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Visą informaciją rasite ekspozicijoje. Klodpfjxvx R Dex Af Iel

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, hidraulinio cilindro reguliavimas: 600 mm, spaudimo jėga: 2 000 t, eigos ilgis: 700 mm, stalo ilgis: 5 500 mm, stalo plotis: 2 500 mm, Tipas: Spaudimo presas Gamintojas: Aida Modelis: S4-20000/5500x2500/LD-ET3 Nominali presavimo jėga: 2000 t SPM (smūgių per minutę): 8-24 Nominali energija: 400 kJ Stūmoklio eiga: 700 mm Stūmoklio reguliavimas: 600 mm Atvira aukštis: 1400 mm Atstumas tarp statramsčių: 5970 mm Stalo matmenys: 5500 × 2500 mm Apatinio stovo stalo matmenys: 5500 × 2500 mm Stūmoklio/ramstinės vežimėlio aukštis: 600 mm Angos statramstyje dydis: 3100 mm Pagrindinio variklio galia: 250 kW Pagalvės jėga: 1500 kN Pagalvės eiga: 250 mm Spaudimo preso svoris apytiksliai: 390000 kg Įprasta stūmoklio padėtis: Viršutinis miręs taškas Maksimalus smagračio greitis: 421,6 aps./min. Didžiausi stūmoklio matmenys: 5500 × 2500 mm Didžiausias viršutinio štampo svoris: 200 kN Energijos tiekimas: 400 V, 50 Hz Mažiausias pneumatinių sistemų slėgis: 6 bar Hidraulinis slėgis stabdžio-sankabos blokuose – min.: 68 bar Hidraulinis slėgis stabdžio-sankabos blokuose – maks.: 73 bar Perdavimo sistema: Perdavimo eiga: 0-1250 mm Didžiausias atsidarymas: 2500 mm Skersinio uždarymo eiga: 0-750 mm Pakėlimo eiga: 0-280 mm Kljdpfx Afox Ifrzj Iel Vidaus tarpas tarp uždaryto skersinio: 1000 mm Technologinės linijos aukštis nuo stalo: 580 mm

Sąlyga: naujas, Gamybos metai: 2025, Slėgis: 315 t Atstumas tarp stovų: 2800 mm Fiksuotas eiga: 35 mm Eigos skaičius: 100–250 eigų/min Montavimo aukštis (eiga + viršutinio stūmoklio reguliavimas): 560 mm Šoninis praėjimas tarp stovų: 600 mm Kledpexcp Itofx Af Isl Stalviršio plotas: 2700 x 1200 mm Prapjova stalo plokštėje: 2450 x 450 mm Stūmoklio paviršius: 2700 x 800 mm Svoris: 80,0 t Reikalingas plotas (PxGxA): 5,1 x 2,65 x 5,25 m

Sąlyga: naudotas, Gamybos metai: 1997, Total pressing force: 315 t Ram stroke: 160 mm Ram adjustment: 100 mm Shut height (stroke down, adjustment up): 1,050 mm Distance between uprights (L-R): 2,740 mm Distance between uprights (lateral): 1,500 mm Distance between oil drip trays: 2,400 mm Kodpfxsvmfzho Af Ioll Table clamping area approx.: 2,740 x 1,800 mm Ram clamping area approx.: 2,400 x 1,700 mm Strokes per minute: 10 – 60 min⁻¹ Power requirement: 75.5 kW Operating hours (machine): 77,341 h Height above floor approx.: 5,500 mm Dimensions (LxWxH): 5,400 x 3,300 x 5,700 mm Machine weight approx.: 80 t Control system: Siemens S5 Standard equipment: Hydraulic tool clamping Additional equipment: Tool change cart

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, hidraulinio cilindro reguliavimas: 400 mm, spaudimo jėga: 2 000 t, eigos ilgis: 800 mm, stalo ilgis: 7 300 mm, stalo plotis: 2 500 mm, Typ: Exzenterpresse (Stanzpresse) Hersteller: Aida Modell: DSF-TE4-20000-730-250 Baujahr: 2022 Nennpresskraft: 2.000 t Energie bei 15 Hüben/min: 630 kJ Energie bei 28 Hüben/min: 390 kJ Hübe pro Minute: – Vollhubbetrieb: 3–28 – Pendelhub (bei max. Vorschub 105 mm): 3–50 Stößelhub: 800 mm Stößelverstellung: 400 mm Maximaler Abstand zwischen Stößel und Pressentisch: 1.200 mm Lichte Weite zwischen den Ständern: 7.580 mm Stößelabmessungen: 7.300 × 2.500 mm Tischabmessungen: 7.300 × 2.500 mm Abstand zwischen den seitlichen Ständern (Öffnung vorne–hinten): 3.650 mm Hauptmotorleistung: 2 × 750 kW Stößelverstellmotorleistung: 30 kW Maximales Oberwerkzeuggewicht: 35.000 kg Normale Stößelruhelage: Oberer Totpunkt (OT) Gesamte Bremszeit bei 15 Hüben/min: 799 ms Sicherheitsabstand: 1.278 mm Sicherheitsbremsdruck: 105 bar Stromversorgung (Drehstrom): 400 V, 50 Hz Ksdpsx Ifn Aefx Af Isll Mindest-Luftdruckversorgung: 5,5 bar Transfersystem: - Vorschubhub, vorwärts (verstellbar): 0–1.200 mm - Öffnungs-/Schließhub je Seite (Barhub, verstellbar): 0–1.020 mm - Hubhöhe (verstellbar): 0–350 mm - Innenlichte zwischen den Bars im geschlossenen Zustand: 700 mm - Maximale Öffnung zwischen den Bars (voll geöffnet): 2.740 mm - Querschnittsabmessungen der Bars: 220 × 220 mm

Sąlyga: naudotas, Gamybos metai: 1997, Press Force: 630 t Stroke: 300 mm Stroke Rate: 10–75 strokes/min Table Size: 3600 x 2200 mm Clear Width: 4000 mm Ram Surface: 3600 x 2200 mm Side Frame Opening: 2000 mm Ram Adjustment: 150 mm Kljdewx R Rdopfx Af Iel Die Height (Stroke Bottom, Adjustment Top): 1000 mm Operating Voltage: 400 V Total Height Above Floor: 7600 mm Pit Depth Below Floor: 2500 mm Total Power Requirement: 160 kW Machine Weight: approx. 225 t Space Requirement: approx. 750 m² Complete blanking line with decoiler/feeder system and destacking unit. The system is suitable for strip widths of 300–1600 mm and strip thicknesses of 0.5–3 mm. The machine is equipped with two sliding tables for front-side changeover. On the side is the destacking unit, with two pallets. The destacking is also possible to the rear, with 2 pallets. Triple coil feeding, each with 25 t, decoiler (Schnutz), strip infeed, straightening machine, and roller feeder.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, Gamintojas: ROVETTA / AIDA Modelis: DFS-TE4-20000(2) 730-250 Spaudimo jėga: 2.000 t Pavaros tipas: SERVO Eiga: 800 mm Judesių dažnis: 50 / min. Stūmoklio reguliavimas: 400 mm Šoninis praėjimas: 3.650 mm Stalo matmenys: 7.300 x 2.500 mm Stūmoklio plotas: 7.300 x 2.500 mm NORDA pernešimo įranga Ksdpfx Aex Idxmjf Isll Pernešimo žingsnis: 0–1.250 mm Pernešimo angos min. / maks.: 700 - 2.740 mm Pernešimo eiga: 0–350 mm Millutensil rulonų linija Medžiagos storis: 0,5–3,0 mm Didžiausias medžiagos plotis: 1.800 mm Rulonų laikiklio keliamoji galia: 20 t

Sąlyga: naudotas, Technical Details: Total nominal force: 1,000 t Clamping area (left-right): x mm Clamping area (front-back): x mm Table size: 4,500 x 2,400 mm Total nominal force: Presses 2-3-4-5 - 1,000 t each Table size: Presses 2-3-4-5 - 4,500 x 2,200 mm Last overhaul in 2021, composed of: Blank automation, manufacturer: Neuhäuser, type 19711505-00, year 2000, SN 367080, material no. FK35835, with integrated blank washing unit by AMTEC, oiler, pallet loading and unloading station, pallet changer cart, control system by Siemens, system no. Blank gripper, system no. 0608300, mounted on press Double-column press (MK11165), manufacturer: Weingarten, type ZS 1600.48, year 1965, order no. 324/64, double action, press force approx. 1,000 t, stroke 900 mm, stroke adjustment 350 mm, distance between table surface and ram 2,150 mm, blank holder force 600 t, stroke 700 mm, adjustment 350 mm, daylight opening between table and blank holder 1,940 mm, max. drawing depth 300 mm, strokes per minute: 12, column distance approx. 5,000 mm, table size approx. 4,500 x 2,400 mm, control system by Siemens, type S7 Blank automation, manufacturer: ABB, consisting of: 2 blank grippers, press-mounted, system no. 0608400, 0608500, blank rotating and turning station, manufacturer: ABB, movable, system no. Double-column press (MK11166), manufacturer: Schuler, type P4E2 SQB 1000/4.5/0.7, single action, press force approx. 1,000 t, ram stroke 700 mm, ram adjustment 400 mm, strokes per minute: 14, column distance 4,560 mm, table size 4,500 x 2,200 mm, ram size 4,500 x 2,200 mm, distance between table and ram surface 1,550 mm, drawing device 300 t, stroke 250 mm, system no. 0186200, control system by Siemens, type S7 Blank automation, manufacturer: ABB, consisting of: 2 blank grippers, system no. 0608600, 0608700, with movable deposit and rotation table, system no. Double-column press (MK11167), manufacturer: Schuler, type P4E2 SQB 1000/4.5/0.7, single action, press force 1,000 t, ram stroke 700 mm, column distance 4,560 mm, ram adjustment 400 mm, strokes per minute: 14, table area 4,500 x 2,200 mm, ram area 4,500 x 2,200 mm, distance between table and ram surface 1,550 mm, system no. 0186300, control system by Siemens, type S7 Kedpfjx Ag Azjx Af Ioll Blank automation, manufacturer: ABB, consisting of: 2 blank grippers, press-mounted, system no. 0608800, 0608900, with blank deposit and turning table, system no. Double-column press (MK11168), manufacturer: Schuler, type P4E2 SQB 1000/4.5/0.7, single action, press force 1,000 t, ram stroke 700 mm, column distance 4,560 mm, ram adjustment 400 mm, strokes per minute: 14, table area 4,500 x 2,200 mm, ram area 4,500 x 2,200 mm, distance between table and ram surface 1,550 mm, system no. 0186300, 0186400, control system by Siemens, type S7 Press automation, manufacturer: ABB, consisting of: 2 blank grippers, press-mounted, system no. 0609000, 0609100, with blank deposit and turning table, system no. Double-column press, manufacturer: Krup, type DPQV4-1000, SN 2602, year 1968, single action, press force 1,000 t, ram adjustment stroke 400 mm, ram stroke 700 mm, strokes per minute: 14, distance between table surface and ram surface 1,550 mm, column distance 4,560 mm, table area 4,560 x 2,200 mm, ram area 4,560 x 2,200 mm, main drive 140 kW, year 1968, system no. 0186500, S