Juostinis konvejeris / kylanti juosta / juostinis konvejeris

MTF Technik GL-HM 010 und GL-Sonder

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Ljdpfxsvgrh Ue Abrshc Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press only): approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2011, Features: * Used telescopic belt conveyor * Condition: fully functional with signs of use * Ideal for rapid material transport * Professionally dismantled and packaged * Color: Blue * 2 units in stock * Price per unit Lodpfx Aod S Hkijbrehc Technical Data: Manufacturer: Budde Year of manufacture: 09/11 Model: TGF03 Total length: 14,530 mm Conveying length: 14,000 mm Retracted length: 5,000 mm Extended length: 14,000 mm Overall width: 1,240 mm (incl. control cabinet) Width: 990 mm Belt width: 600 mm Condition: good (used) Belt type: smooth Overall height: 750 mm Dead weight: 2,200 kg Including counterweights at the rear. Telescopic Belt Conveyor The telescopic belt conveyor is ideally suited for use in picking zones to connect machines or workstations and optimize internal workflows. During transport, the telescopic belt conveyor can move sensitive and differently sized containers, boxes, or other packaging and item units to the loading or unloading point. It can also be used as a connecting section before or between production and processing machines. Furthermore, it enables efficient transport of parts within the facility and warehouse, and is suitable for conveying significant quantities and distances. Tailored solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We are happy to provide you with a customized offer or advise you on planning and installation matters. Just let us know your requirements and site conditions. Take advantage of our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies in various industries, such as logistics, the pharmaceutical industry, trade, or the electronics sector. Together, we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automated sorting technology or additional components such as picking racks or containers.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Cyklop XZE-311 Strapping Press Year of manufacture: 2003 Passage width: max. 2200 mm Passage height: max. 2200 mm Strap guide distance: 625 / 440 mm Roller pitch: 60 mm Strapping speed: 2.9 m/s Strapping unit tension force: adjustable up to 2000 N Ledpfx Abstqpadjrjhc Pressing force: adjustable from 5 to 48 kN

Gamybos metai: 2003, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Stock no. 2651 1 used underwater pelletizing system, partially overhauled in 2023 Throughput up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, 4.4 kW drive By-pass system TVE 1000 ED pellet dryer with 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200 L water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further underwater pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Ledpfxoiyyf Ij Abrehc Available from stock Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruders.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, BAYHA 500 LIT ID-Nr. 2637 Ljdpfx Aeq T Rz Isbrohc Bayha 500-Liter-Kochkessel mit Gasbeheizung, Baujahr 2006. Abmessungen: 170 x 125 cm, Höhe 100 cm.

Sąlyga: naudotas, Gamybos metai: 1988, Bobst Flexo 1604 Printing Machine, bottom printing, 4 colours, equipped with anilox cylinders 120 l/cm and 80 l/cm. Bobst Transfer BOBST SPO 1600 Flatbed Die Cutter, max format 1100 mm x 1600 mm / 43.3" x 63", with 4 bottom-side printing units plus MPA, sheet transport with traditional rollers. - Anilox cylinders with 120 and 80 lines - Open steel doctor blade chamber - Vacuum feeder - Die cutting section - Waste stripping section - Centerline II - High pile delivery with two lifting platforms - Max sheet size: 1100 mm x 1600 mm / 43.3" x 63" Lsdpfx Asv Ifpusbrehc - Min sheet size: 520 mm x 600 mm / 20.5" x 23.6" - Cutting force: 400 t - Materials: E, B, C flute, CB, BE - Max speed: 6,000 sheets/hour Possibility to sell machines separately.

Gamybos metai: 2013, Sąlyga: naudotas, Cutting diameter: 420 mm Saw blade length: 41 x 5600 mm Cutting width: 1.3 mm Lodpfx Aod Izmajbrshc Control system: Simatic S7 Touch Band speed: 17 - 110 m/min Saw motor: 7.5 kW Round material diameter: 420 x 3000 mm Round material diameter: 300 x 6000 mm Total power requirement: 30 kW Machine weight: approx. 18.5 t Space requirement: approx. 12.5 x 5.0 x 2.5 m CNC sawing system with JAESPA Compact 4S bandsaw including round bar magazine and unloading gripper, designed for sawing round bars from 50 to 420 mm. The magazine features 6 storage compartments, each with a maximum bar weight capacity of 3,400 kg. Cutting lengths range from 20 to 1000 mm. Like-new condition, approximately 1,000 operating hours.

Gamybos metai: 2002, Sąlyga: naudotas, Press pressure: 63 t Throat depth: 315 mm Stroke: 8–100 mm Strokes per minute: 140 spm Ram adjustment: 63 mm Table area: 1200 x 630 mm Ram area: 800 x 315 mm Lodpfx Abelp U D Torohc Through-hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight approx.: 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation Roller block rails in table Hydraulic tensioner on ram Counterbalance cylinder Approved for manual loading and unloading

Gamybos metai: 2006, Sąlyga: labai geros būklės (naudotas), Robot Fanuc R-2000iB/210F (E-25677) Year of manufacture: 2006 Maximum reach: 2655 mm Controller: Fanuc R-J3iC Lhodpfx Absizth Herjc Payload: 210 kg 5 robots available, each equipped with a different tool on the arm.

Gamybos metai: 2022, Sąlyga: naujas, For sale is an NS 2 conveyor belt from Mass International. Lhsdef E E Iqspfx Abroc You have the option to purchase the belt either with or without a separating roller. The separating roller is available at an additional cost of €332. Infeed width: 600 mm Belt length (incline): 1,300 mm Overall width: 405 mm Usable width: 350 mm Constant belt speed: 3 m/min