Weiler E 80 pirkti naudotą (183)

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Universal lead and feed screw lathe Manufacturer: WEILER Model: Primus VC Year of manufacture: 2007 – overhauled Newly painted RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Cpjdpfx Ajv D Ip Nsf Tju Spindle bore: 40 mm With warranty Geometric inspection with test protocol Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Motor with brake - Quick change tool post base size A - Bed stop - Covered lead and feed screw - Chip backsplash - Removable chip tray - Operating manual - Used, as seen -

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1974, Universal lead and feed screw lathe Brand: WEILER Model: Commodor Year of manufacture: 1974 – overhauled newly painted RAL 7035 light grey Machine no.: 0068 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: 56 mm with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-T, new - Chuck guard with electrical interlock - Quick-change tool post size B - Simple bed stop Cpodpsmgaddsfx Af Tsu - Coolant system - Operating manual - used, as seen -

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1990, Universal lead- and feed-screw lathe Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 1990 – overhauled Newly painted RAL 7035 light grey Machine no.: 90-160-2054 Center height: 160 mm Distance between centers: 650 mm Geometric acceptance with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant system - Electrically interlocked chuck guard - Size A quick-change toolholder - Simple bed stop - Chip guard rear wall - Operating instructions With warranty Used, as seen The machine is technically at the level of its year of manufacture. Csdpfjhy Tdyjx Af Tjpu

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Universal lead and feed screw lathe Brand: WEILER Csdpfxjg R S Rce Af Tspu Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light grey Machine No.: 1401 with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electric interlock, new - Size B quick-change toolpost base - Bed stop - Coolant system - Chip guard/rear panel - Operating manual - used, as seen -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Technical School Technical Specifications: Cpedjx Eb A Uspfx Af Tju >> Year of manufacture: 1992 >> Machine no.: 92 160 3260 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Switchable spindle brake >> Dimensions (L x H x D): 1.6 m x 1.25 m x 0.7 m Accessories and Features: >> 3-axis digital readout by K&C with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, counting direction switching >> Collet chuck system with NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck (steel jaws) with 1 set of jaws >> Quick-change toolpost with 4 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Operating manual, spare parts list About the Machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe with toolmaker precision, year 1992, in very good condition. The machine is, of course, fully functional. The carriage system runs very smoothly and evenly. Even at high speeds, the Weiler operates quietly. This newer generation of Weiler lathes is very operator-friendly and delivers ground-like surface finishes. Take the opportunity to view this machine on site under power and see the condition for yourself.

Sąlyga: naudotas, bendras ilgis: 1 500 mm, bendras plotis: 750 mm, bendras aukštis: 1 350 mm, Svoris be apkrovos: 700 kg - Dokumentacija prieinama: Taip - CE sertifikatas: Ne - Valdymas: Konvencinis - Centrų aukštis [mm]: 150 - Tekinimo skersmuo virš lovos [mm]: 300 - Tekinimo skersmuo virš skersinio slydimo [mm]: 160 - Atstumas tarp centrų [mm]: 500 - Lovo plotis [mm]: 210 - Veleno skylės skersmuo [mm]: 36 - Min. veleno apsisukimų dažnis [aps./min.]: 15 - Maks. veleno apsisukimų dažnis [aps./min.]: 3550 - Transportavimo matmenys: 1500mm x 750mm x 1350mm (i x p x a) - Transportavimo svoris [kg]: 700kg - Transporto pakuotės [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir priėmimas galimi bet kuriam pramonės sektoriaus įrenginiui Cedpfx Afsx D Tlre Topu Lukas van Rossum

Sąlyga: paruoštas naudoti (naudotas), Tarpatverčių atstumas: 500 mm, atverčių aukštis: 140 mm, tekinimo skersmuo virš staklių lovos/skersinio vežimo: 295 mm/155 mm, špindelio skylė: 36 mm, sukimosi greitis: 3550 aps./min, atraminio centro kūgis: MK3. Staklių matmenys X/Y/Z: apie 1500 mm/800 mm/1250 mm, svoris: apie 700 kg. Galima apžiūrėti vietoje. Cpodpjx Hz Rqofx Af Tju

Sąlyga: paruoštas naudoti (naudotas), Galima įsigyti konvencinį precizinį tekinimo staklės Weiler. Tarpcentris: 650 mm, centrų aukštis: 160 mm, apsūkų skersmuo virš lovos/plansšetės: 320 mm/190 mm, veleno skylė: 43 mm, sūkių dažnis: 2500 aps./min., uodegos įvorės skersmuo: 40 mm, eigos ilgis: 85 mm. Staklių matmenys X/Y/Z: apie 1800 mm / 900 mm / 1600 mm, svoris: apie 1050 kg. Apžiūra vietoje galima. Cedjx Hz N Hepfx Af Tspu

Sąlyga: naudotas, Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, Veleno ir vilkimo veleno tekinimo staklės Gamintojas: WEILER, modelis COMMODOR Metai: 1979 Techniniai duomenys Gamintojas: Weiler Modelis: Commodor Atstumas tarp centrų: 1000 mm Sukimosi skersmuo virš lovos: 400 mm Veleno pralaida: 50 mm Sukimosi greičio diapazonas: 63–2000 aps./min. Pavaros galia: 4 kW Matmenys: apytiksliai Ilgis 2,2 x Plotis 1,0 x Aukštis 1,7 m Svoris: apie 1,5 t Įranga • 3 ašių skaitmeninis indikatorius • Gręžimo griebtuvas • 3 žandikaulių griebtuvas Röhm, D 200 mm • Multifix laikiklis • Papildomas 3 žandikaulių griebtuvas, kuris yra ant staklių, nepriklauso pristatymo komplektui! Csdoxt Ngqepfx Af Tjpu Visa informacija pateikiama be garantijos. Galima bet kada pamatyti veikiantį įrenginį mūsų parodų salėje.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Centru aukštis: 160 mm Cpjdew Sn Irspfx Af Tsu Atstumas tarp centrų: 650 mm Veleno greitis: 2 500 min-1 Multifix Uodegos atrama Priedai

Gamybos metai: 1986, Sąlyga: naudotas, Weiler Primus lathe, year of manufacture approx. 1986, three-jaw chuck, Multifix toolpost. The machine is in good condition and can be demonstrated under power by appointment. Csden Ard Dspfx Af Topu

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1977, Mechaniko tekinis staklės Gamintojas: WEILER Modelis: MDU 260 Pagaminimo metai: 1977 – patikrinta dirbtuvėse Mašinos Nr.: 14942 Centro aukštis: 125 mm Veleno anga: 28 mm Csdoxv A I Tepfx Af Topu Priedai: - Elektrinis griebtuvų apsauginis gaubtas - 3-žnyplių griebtuvas Ø 140 mm įskaitant tekinimo žnyplių komplektą įskaitant gręžimo žnyplių komplektą - 4-žnyplių griebtuvas Ø 140 mm įskaitant tekinimo žnyplių komplektą įskaitant gręžimo žnyplių komplektą - Saugus tekinimo griebtuvų raktas - Rankinis prispaudimo įtaisas - Spaustukų komplektas W28 (366E) - Komplektas (=25 vnt.) spaustukų W28 (366E) nuo 1,0 iki 25,0 mm kas 1,0 mm - Standus centras velenui W28 (366E) - Greitos pakeitimo įrankių laikiklis Pagrindinis korpusas Gr. A - Naudojimo instrukcija Naudota kaip matyta, be garantijos Mašina techniškai atitinka savo pagaminimo metų standartą.

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor geros darbinės būklės. Specifikacijos: Cpsdpfx Asx Ngpdof Teu Sukimosi skersmuo virš staklių lovos: 380 mm Sukimosi skersmuo virš skersinės atramos: 190 mm Atstumas tarp centrų: 1000 mm Pagrindinio veleno pragręža: 56 mm Apsisukimų dažnis: 25–2000 aps./min Variklio galia: 4 kW Staklės komplektuojamos su: 3 ašių skaitmenine indikacija 3-žandikaulių griebtuvas su papildomais žandikauliais Aušinimo sistema Multifix peilių laikiklis su 4 laikikliais Spaustuvų sistema su spaustuvais Lovo stabdis

Sąlyga: geras (naudotas), Atstumas tarp centrų: 450 mm Centro aukštis: 120 mm Velena anga: 23 mm Sukimosi greitis: 40 – 3000 aps./min. Bežingsnis pavara su 3 pavarų žingsniais ir skaitmeniniu greičio indikatoriumi Galinis centras: MK 2 Pavaros galia: 1,5 kW Svoris: 350 kg Matmenys: 1200 x 650 x 1330 mm Dažymas: Resedos žalia RAL 6011 Cedpfx Afew I A Uxs Tjpu Skaitmeninis rodmuo: Pageidaujant už papildomą kainą Priedai: Papildomi priedai pagal užklausą

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Provisur Weiler 878 mėsmalė, 50 AG modelis. Puikus įrenginys mėsainių, dešrų ar gyvūnų ėdalo gamintojams. Gali malti šviežią arba sušaldytą pjaustytą mėsą. Pratęstas bunkerio talpa. Cedpfox Av Rusx Af Tjpu

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Codpfx Aou Aftgsf Tspu Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speeds: 60 - 3000 rpm, 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 (MT 2) >> Feeds: 0.03 to 0.15 mm/rev >> Available threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A quick-change tool post with 3 holders >> Stop >> Change gears About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is highly user-friendly and can produce surface finishes comparable to grinding. You are welcome to inspect the machine under power on site to verify its condition.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Speed range: 60 - 3,000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Equipment and Accessories: >> 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electric spindle guard Cedsvtp Edjpfx Af Tepu About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to view this machine under power on-site and see its condition for yourself.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus GS Lead and Feed Screw Lathe with 3-axis Digital Readout Easson-ES8 from Training Workshop – Excellent Condition! Cpedevkfhpopfx Af Tou Technical Data: - Year of manufacture: approx. 1990, Machine No. 3768 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm, 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock taper: Morse 2 (MK2) - Feeds: 0.03 to 0.15 mm/rev - Capable of cutting metric, imperial, module, and diametral pitch threads - Metric thread pitches from 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Features: - 3-axis digital readout by Easson ES8 - Collet system from 1 to 20 mm, collets increasing by 1 mm increments, with chuck and draw tube - 1 three-jaw chuck with 2 sets of jaws - 1 four-jaw chuck with 2 sets of jaws - Multifix tool post, size A, with 3 tool holders - Bed stop - Faceplate turning attachment About the Machine: For sale is a Weiler Primus lead and feed screw lathe built approx. 1990, in excellent condition. The machine is, of course, fully functional. The carriage moves very smoothly and evenly. The bed guides are in a very good condition. The lathe runs quietly, even at high speeds. The machine comes from a large company's training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the creation of ground-like surface finishes. Take advantage of the opportunity to inspect the machine on site under power and convince yourself of its condition.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm Csdpfxevivmys Af Tepu >> Switchable spindle brake >> Weight: approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm in 1 mm steps, new About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages move smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced to a near-ground finish. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, Weiler Primus VC Precision Centre Lathe with 3-Axis Digital Readout K&C NEW with VC Drive, Infinitely Variable Spindle Speeds and CE Certified, in Very Good Condition Technical Data: >> Year of manufacture: 2003 Machine No.: 646 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 800 kg >> Switchable spindle brake >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Cpedow Idllspfx Af Teu Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A quick-change tool post with 2 holders >> Electric chip guard >> Machine feet >> Splash guard About the Machine: Offered is a Weiler Primus VC lead and feed screw lathe, year 2003, in very good original condition. This is a very well maintained lathe with VC drive and infinitely variable speed of the work spindle. The K&C digital readout and linear scales are brand new. This newer generation of Weiler lathes is very user-friendly and enables the production of ground-like surface finishes. The K&C digital readout makes working even easier and more precise. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Technical Data: >> Year of manufacture: 1987, Machine No. 87 835 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread types possible: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake engageable >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty, with operating manual Codpfx Afswrmuxe Tepu Functions: mm/inch switching, selectable coordinates ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> 1 new 160 mm 3-jaw chuck, incl. 2 sets of jaws >> 1 160 mm 4-jaw chuck, incl. 1 set of jaws >> Collet chucking device and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Machine feet About the Machine: Offered for sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational, and has been completely dismantled and newly painted. A very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to visit and test this machine live under power at our location.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with New 3-Axis Digital Readout from K&C, Straight from Training Workshop! Technical Data: Cedpfew Nw Dqsx Af Tepu >> Machine No.: 91-1814 Year of Manufacture: 1991 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: from 22 to 2800 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with Bayonet Lock >> Tailstock Morse Taper: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric Thread Pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Switchable Spindle Brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> New K&C 3-axis digital readout, 12 months manufacturer’s warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck with 1 set of jaws >> Collet chuck, new, and new collets from 2 to 24 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady rest >> Machine mounts Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: For sale is a Weiler Condor in excellent condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our premises.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1983, Funkcionalumas: visiškai funkcionalus, Weiler Center Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C, NEW Cpsdpjwb Supjfx Af Tju Technical specifications: >> Year of manufacture: 1983, Machine No. 83-067 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> New 3-axis digital readout by K&C, 12-month manufacturer's warranty, with operating manual. Functions: Metric/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming (200 positions), taper calculation, radius/diameter, quick zeroing, counting direction switching >> 1 x 160 mm three-jaw chuck, NEW, with 2 sets of jaws >> Collet chuck, new, and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Machine feet About the machine: Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. It is a very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested in our facility. A complete oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take the opportunity to view and test this machine under power on-site.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: - Year of manufacture: 1988 - Machine No.: 88-955 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: MT 3 - Feeds from 0.015 to 0.46 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitches: 0.18 to 28 mm - Weight: approx. 1,100 kg - Spindle brake can be engaged - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Features: - 3-axis Heidenhain digital readout - 1 piece new 3-jaw chuck with 2 sets of jaws - Collet chuck with collets from 3 to 30 mm, 40 collets in total, some duplicates Csdpfsxu Hlaex Af Tspu - Multifix quick-change toolpost size B with 3 tool holders - Bed stop - Machine feet - Drill chuck - Live center Safety Equipment: - Lead and feed screw guard - 2 emergency stop switches - Spindle brake About the Machine: For sale is a used Weiler Condor 81 lathe, year 1988, in very good condition. The machine is, of course, fully functional. The lead and feed screws are fitted with protective covers for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our premises.

Sąlyga: geras (naudotas), Leit & Zugspindel tekinimo staklės WEILER CONDOR - Originali dažai - Centrinis aukštis 165 mm - Tekinimo skersmuo virš lovos 330 mm - Tekinimo skersmuo virš supoorto 170 mm - Atstumas tarp centrų 800 mm - Špindelio apsukos 24 - 2800 aps./min - Automatinis išilginis / skersinis pastūmimas - Špindelio skylė 38 mm - Grąžto mova MK 3 - Fiksavimo įtaisas + 17 spaustukų - Trijų žandikaulių griebtuvas - Multifix su kasetėmis - Elektrinė griebtuvo apsauga - Drožlių užtvara - Darbo lemputė - Įvairūs priedai - Dokumentacija Matmenys: Ilgis x plotis x aukštis 1,8 x 0,9 x 1,6 m / Svoris 800 kg Galimi netikslumai ir klaidos Cpjdpfxox A D Ubo Af Tsu