Viršutinė Stūmoklio Spaudos pirkti naudotą (1 856)

Sąlyga: naujas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: DF0309, Press force: 200 t Table length: 2500 mm Table width: 2000 mm Maximum stroke: 2050 mm Dimensions L x W x H: approx. 9200 x 4700 x 5800 mm Return force: 25 t Machine weight approx. (without operating fluids): 50 t Column diameter: 210 mm Table swivel speed: 25 mm/sec Table extendable: 2000 mm Movable table speed: 30 mm/sec Max. table load: 15 t Drive power: 20 kW Adjustable working speed: 1 - 10 mm/sec Advancing speed: 10 mm/sec Return speed: 25 mm/sec Rapid traverse speed: 10 mm/sec Oil tank: 400 l Oil cooling (electric): 1.5 kW (max) Platform height: 650 mm Table height: 800 mm Ram height: 850 mm Control system Siemens: S7 1200 Monitor: WEG 12 inch Hydraulics and tank on top of press: 10,200 ? Perimeter maintenance balcony: 5,000 ? Ejector in table (capacity 30 tonnes, travel 250 mm): 4,000 ? Two controlled hydraulic inlets and outlets: 1,000 ? Rotatable (up to 180°), electrically driven table: 18,000 ? Ijdpofxyi Dofx Af Ioht Safety guard around work area: 1,500 ? Tabletop tiltable up to 75°: 12,000 ? Upper tool foldable: 170 degrees Swivel table: 75 degrees Table tiltable: 75 degrees Ejector with 60T in center of ram: 12,000 ? Ram plate foldable by 180 degrees: 14,000 ? Operation of the spotting press: Control functions: The control system features 'Manual' and 'Semi-Automatic' modes. In manual mode (joystick operation), the following can be performed: - The table can be extended and retracted hydraulically at up to 30 mm/sec. - The table can be hydraulically tilted at up to 25 mm/sec. to the set angle. - The ram plate can be hydraulically lowered, folded down by 90°, and extended up to 180°. - Operation without pressure is possible. - Pressure can be set via the monitor. - Speed can be adjusted between 1 and 10 mm/sec. - An additional hydraulic cylinder (core pull, etc.) on the tool can be controlled. In semi-automatic mode: - The ram can be moved in rapid traverse up to 10 mm/sec. - Previously entered programs can be processed via the monitor. - Example: - 30 t pressure - Upper stop 300 mm - Lower max. stop 900 mm - Speed change point 850 mm - Rapid traverse at 10 mm/sec - Pressing speed from 850 mm onwards limited to 10 mm/sec - Dwell time after reaching set pressure or BDC: 1 second - Return to upper stop Joystick function: The lever can be pulled (downstroke) or pushed (upstroke). The more it is actuated, the faster the machine operates. 1 to 10 mm/sec for downstroke, and 1 to 25 mm/sec for upstroke are possible. Monitor display: The large touchscreen monitor always shows the ram position, set pressure, and current speed. In semi-automatic mode, all cycle values are visible, can be saved, and reloaded as needed. The operator panel consists of two-hand control, joystick, emergency stop button, and selector switches for: - Extending/retracting the table (activates two-hand operation) - Tilting/leveling the table (activates two-hand operation) - Raising/lowering the ram (activates joystick) - Lowering/raising the ram plate (activates two-hand operation)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, Aprašymas bus pateiktas vėliau Ihjdexzk Ncspfx Af Ist

Sąlyga: geras (naudotas), Gamybos metai: 1996, Heidelberg SM 102-5P3 Metai: 1996 Formatas: 72x102 cm Atspaudų skaitiklis: 236 milijonų Perforatorius: 2+3 /5-0 CPC 1.04 CP Tronic Alcolor drėkinimo sistema Pusiau automatinis plokštelių keitimas Automatinis velenėlių ploviklis Automatinis dengiamųjų antklodžių ploviklis Preset paduotuvas Technotrans aušinimo-recirkuliacijos sistema Grafix miltelių purškiklis Plieninė plokštė paduotuvei / atiduotuvei Centrinė oro sistema – be kompresoriaus Grynas svoris: 34 730 kg Ilgis: 1 010 cm Plotis: 331 cm Aukštis: 217 cm Didžiausias formato X dydis: 72 cm Didžiausias formato Y dydis: 102 cm Mažiausias formato X dydis: 28 cm Mažiausias formato Y dydis: 42 cm Spausdinimo paviršius X: 70 cm Spausdinimo paviršius Y: 102 cm Maks. popieriaus storis: 0,8 mm Min. popieriaus storis: 0,03 mm Krovimo aukštis paduotuvei: 123 cm Krovimo aukštis atiduotuvei: 121 cm Iodpfsx Na Ugsx Af Ioht Vis dar gamyboje Galima tiekti nedelsiant

Sąlyga: labai geros būklės (naudotas), 1,0 vnt. naudota tamponinės spaudos mašina Ihodpfx Aox Ddk Ssf Iot Gamintojas: TECA PRINT AG Tipas: TPU 250

Sąlyga: naudotas, Gamybos metai: 1964, A3 formato spaudos staklės su HAKRO karštos folijos įspaudų įrenginiu, greitai prieinamas Ihsdpsxvcqujfx Af Ijt

Sąlyga: geras (naudotas), Gamybos metai: 2000,

Sąlyga: naujas, mašinos/transporto priemonės numeris: DF0261 - Rev.00, Pressure: 63 t Table length: 1200 mm Table width: 1000 mm Max. stroke: 1050 mm Dimensions L x W x H: approx. 3350 x 1800 x 4700 mm Return force: 6 t Iodpfefhcc Sex Af Isht Machine weight approx. (without operating fluids): 10 t Column diameter: 120 mm Top tool foldable: 180 degrees Swivel table: 75 degrees Swivel speed table: 25 mm/sec Tilting table: 75 degrees Table extractable: 1100 mm Max. table load: 5 t Motor power: 10 kW Oil tank: 200 l Oil cooling (electrical): 1.5 kW (max) Monitor: (WEG) 12 inch

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, veikimo valandos: 28 300 h, mašinos/transporto priemonės numeris: 16500126, Pressure: 400 kN Total bending length: 1030 mm Standard stroke [S]: 200 mm Daylight [D]: 515 mm Distance between uprights: 1060 mm Table width: 60 mm X-axis backgauge travel range: 500 mm X-axis travel: 300 mm X-axis travel speed: 1500 mm/s R-axis travel: 100 mm R-axis travel speed: 500 mm/s Z-axis travel: 955 mm Z-axis rapid traverse speed: 2000 mm/s Y-axis rapid traverse speed: 300 mm/s Maximum Y-axis bending speed: 25 mm/s Y-axis positioning accuracy: 0.004 mm Oil capacity: 100 l Main drive power: 7.5 kW Weight: 4 t Length, approx. [L]: 1520 mm Width, approx. [W]: 1584 mm Height without increased daylight and stroke, approx. [H]: 2449 mm Ihsdpswv N Najfx Af Ist 1. Intelligent control system and exceptionally low-noise drive (below 75 dB) in the Xpert 40 enable production of parts with approx. 30% lower energy consumption compared to conventional electrically driven machines. 2. ByVision software with 22'' LCD touchscreen display 3. Intelligent process monitoring with Energy Saver 4. Automatic tool protection system 5. Foot pedal 6. Electrically operated protective sliding doors 7. User manual on CD 8. Operating temperature from 7°C to 35°C 9. Voltage: 400 V, 50 Hz, 3 Ph 10. “Bend G2” – optical safety system with manual height adjustment 11. 6-axis backgauge (additional 3 axes) 12. 3-backgauge kit - Xpert 40 (N0002.0040.000) – kit for integration of a third backgauge in the press brake 13. Ergonomic LED lighting package, Light output: 1500 lux 14. Ergonomic front supports including table, max. load: 35 kg 15. "Within arm’s reach" tool cabinet – holds 3 m of tools "within arm’s reach" (1 punch set and 2 die sets) 16. Optical bending guidance system – the operator is guided throughout the bending process by the optical guidance system 17. Ergo Bending Line Laser – Bystronic bending line laser serves as an operator assist, visualizing the bending line on the material surface. The operator is supported by the virtual bending line should the rear finger backgauge not be usable (fully or partially). The laser bending line can be set at various heights depending on the die height (e.g. 55 / 100 mm), material thickness or part size. 18. Productive clamping pack XPT (WILA NSCL II upper tool clamp and table T12/90) 19. WILA hydraulic clamping package includes both upper and lower tool clamping with table T12/90. 20. WILA NSCL II/XPT upper tool clamping (Productive clamping pack XPT) – XPT (Wila) type upper tool clamping allows tool mounting in both 0° and 180° orientations. 21. Table T12/90 (Productive clamping pack XPT) – Table T12/90 with a height of 90 mm and width of 72 mm offers ample space for Z-bends. The machine is fully operational and in continuous use. Inspection and testing of the machine are welcome.

Sąlyga: naudotas, Gamybos metai: 2007, Equipment – KBA Rapida 105U-4 + L FEEDER / FEEDING UNIT • Deionizing units – basic configuration in the feeder PRINTING UNIT • Pneumatic sheet folding device • Differential drives in damping units • Baldwin cylinder washing device • Cardboard core version – impression cylinder device • Cardboard core version – blanket washing device • Ink roller cooling for wet offset (individual units) PERIPHERALS • Manual plate punch – Planeta (780 mm punching distance) • Initial set of printing aids AIR SUPPLY • Cabinet for housing compressors, non-regulated, incl. exhaust hood COATING TECHNOLOGY • Coating tower with chamber doctor blade (Harris & Bruno) and pneumatic coating pumps • Coating supply and cleaning unit • Extended delivery (2600 mm) • Additional anilox roller • ACS – Air Cleaning System Iodpfxox Hxn Hj Af Ijht • Coating form cylinder with quick-lock for coating plates • IR thermo-air dryer Rapid-Dry V • Pile thermometer • Dryer control via central console OPERA / SOFTWARE • CIPLink software (installation CD) • Computer to be provided by the customer

Sąlyga: labai geros būklės (naudotas), 1,0 vnt. naudota tamponinės spaudos mašina Gamintojas: TECA PRINT AG Tipas: TPU 250 Isdpfxjx A E Dks Af Isht

Sąlyga: naudotas, Gamybos metai: 1956, A3 formato spaudos staklės su HAKRO karštos folijos įspaudų įrenginiu, greitai prieinamas Ihodexvcg Ajpfx Af Ijt

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, darbinis plotis: 1 250 mm, darbinis greitis: 10 mm/s, atramdų greitis R ašis: 150 mm/s, Galinio stabdiklio eiga, R ašis: 100 mm, atstumas, kurį nuvažiuoja galinis ribotuvas Z ašis: 1 000 mm, bendras svoris: 3 250 kg, bendras aukštis: 2 510 mm, Y ašies eiga: 590 mm, spaudimo jėga: 35 t, aukščio reguliavimo tipas: elektrinis, greitas poslinkis Y ašis: 110 m/min, stalo plotis: 60 mm, darbinis ilgis: 1 250 mm, Servo-electric press brake SAFANDARLEY model E-Brake Premium 35-1250 ES Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. Ijdpov Eam Njfx Af Ijht - Servo-electric drive - Stroke: 300 mm - CNC control in axes Y1 / Y2 / X / R - Back gauge in 2 CNC axes - X and R - 2D graphical control - EC20 model - Programmable light curtain - WILA tooling system - upper clamp - WILA tooling system - lower clamp, compatible with 4V / 2V / 1V / T-type dies with a 60 mm base The machine is in very good condition after a technical inspection by the manufacturer. Max. press force: 350 kN Max. bending length: 1,250 mm Max. installation height Q, standard (without tool adapter and table): 650 mm Max. press stroke: 300 mm Upper beam positioning accuracy: +/- 0.01 mm Max. programmable adjustment for Y1 - Y2: +/- 2.50 mm Max. Y-axis approach speed*: 180 mm/sec Max. bending speed*: 10 mm/sec Max. return speed: 180 mm/sec X-axis positioning speed: 350 mm/sec Max. back gauge travel (X-axis): 550 mm Max. back gauge travel (second stop point, X-axis): 575 mm Max. back gauge travel (third stop point, X-axis): 1,000 mm Back gauge positioning repeatability: +/- 0.02 mm Max. back gauge travel (R-axis): 150 mm R-axis positioning repeatability: +/- 0.10 mm R-axis positioning speed: 100 mm/sec Weight: 3,250 kg Connected load: 11 kW Machine length: 2,230 mm Machine width: 1,775 mm Transport height: 2,510 mm Mains voltage: 3/N/PE 50Hz – 400/230V The machine is connected and ready for demonstration at our headquarters in Warsaw. Available immediately.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2015, Pressure: 63 t Table length: 700 mm Table width: 1000 mm Approx. machine weight: approx. 9 t Space requirements approx.: 4500 x 4300 x 2700 mm Main cylinder: 1 unit Stroke length: 1200 mm Installation height, table/ram top: 1200 mm Table height: 700 mm Table extendable: by 1200 mm Table tiltable: by 45 degrees Upper tool tiltable: by 170 degrees Ijdpfx Afjffamqo Ieht Distance between columns: 1250 x 1000 mm Max. table load: 5 t Table traversing speed: 25 mm/sec Approach speed: 95 mm/sec Return speed: 80 mm/sec Working speed adjustable: from 0 to 10 mm/sec. The linear scale continuously communicates the ram position to the control system. The travel distance, upper stop point, switchover point (at which the press switches from rapid traverse to working speed), as well as the required end position can easily and quickly be set via the monitor control. The working speed can be adjusted in increments of 1 mm/sec from 5 to 10 mm/sec and in increments of 10 mm/sec from 10 to 95 mm/sec. The control monitors the protected areas, the entire hydraulics, and the pump. The control system is housed in a separate control cabinet.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: PL071105402R, M&R džiovintuvas su 122 cm pločio juosta. Džiovintuvas puikios būklės ir veikia elektra. Juosta pakankamai plati, kad šalia vienas kito tilptų dvi tekstilės eilės! Mes jau išardėme džiovintuvą ir paruošėme siuntimui. Todėl išmontavimo išlaidų nėra. Taip pat mes pasirūpinsime pakrovimu į sunkvežimį. Turime vietoje savo ekspedijavimo įmonę. Siuntimo kaina priklauso nuo gavimo vietos. Rekomenduojame tiesioginį pervežimą! Isdpfx Afow Stp Ie Ieht

Gamybos metai: 2007, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Parduodama 4 spalvų ofsetinė ritininė spaudos mašina GOSS M 600 C, skirta žurnalų, knygų ir reklaminės produkcijos dideliems tiražams spausdinti, 2007 m. gamybos, mechaninis našumas 55 000 egz./val. Įranga: - JF-55 lankstytuvas - OMNICOM valdymo sistema - Autoplate – automatinis plokštelių keitimas Ihsdpexp Ebcsfx Af Iet - QUADTECH registravimo ir pjovimo kontrolės sistema - Uždara spalvų kontūro sistema - CCS ICON QUADTECH - Automatinis guminių voleklių valymas - Baldwin - Spaudinių silikonizavimas - Įklijų klijavimo sistema – Robatech - Įklijų priėmimo ir pjovimo įrenginys - Muller Martini - Kryžminis dėjiklis (Cross Stacker) - Muller Martini - Centrinė atliekų ištraukimo sistema - Ecocool krosnis - su integruotu išmetamųjų dujų sudeginimu ir šilumos atgavimo sistema - Velenu be transmisijos (shaftless)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, bendras ilgis: 6 200 mm, bendras plotis: 2 000 mm, bendras aukštis: 2 400 mm, suslėgto oro jungtis: 6 juosta, įvesties srovės tipas: Oro kondicionierius, bendras svoris: 1 300 kg, įėjimo srovė: 32 A, konvejerio juostos plotis: 120 mm, Įranga: dokumentacija / vadovas, Butelių, stiklinių ir plastikinių gaminių šilkografijos mašina, valdoma CNC. Produktyvumas: 800–1000 vienetų per valandą, vienos spalvos spauda su registro funkcija. Su įėjimo ir išėjimo konvejeriais, robotinėmis rankomis. Prijungtas UV džiovintuvas su Fusion lempa, 250 W/cm, 250 mm ilgio šviestuvas. Daugiausia spausdinti stikliniai buteliai. Visa informacija ir atsakymai į klausimus suteikiami el. paštu arba telefonu. Mašiną ir džiovintuvą galima parduoti atskirai. Ihsdsx Hqu Sepfx Af Iot

Sąlyga: naudotas, Gamybos metai: 2001, Heidelberg SM102-10-P6-S Metai: 2001 86 milijonų atspaudų Maks. formatas: 72×102 cm CP2000: mašinos valdymo ir komandų pultas Preset: automatinis formato nustatymas Įeinanti metalinė plokštė Nepertraukiamas popieriaus tiekimas (non-stop feeder) Nepertraukiamas popieriaus išėmimas (non-stop delivery) Eltex antistatinis įtaisas Elektroninis dvigubo lapo kontrolė Elektroninis nepaduoto lapo kontrolė Volelių pataisa (wheel tacking) Fotoląstelės Automatiniai dažų stalčiukai, reguliuojami per CP2000 Alcolor VARIO: drėkinimas su greičio kompensacija Technotrans aušintuvas Automatinis antklodžių, voleklių ir spaudos cilindrų plovimas Autoplate: pusiau automatinė plokščių keitimo sistema Preset: automatinis formato nustatymas Isdpfx Ajx Ry A Tjf Ieht Registravimo sistema su ašine, apimtimi ir įstrižo krypties judėjimu Automatinė 4/4 reverso sistema (perfecting) S modulis: išvestis su papildomu voleliu Grafix Exatronic Duo Plus popieriaus atliekų mažinimo sistema (anti-scrap) IR džiovinimo krosnys Išeinanti metalinė plokštė AirStar: centralizuota ir garsui izoliuota oro siurblių kabina Oro aušinimas

Sąlyga: naujas, Gamybos metai: 2025, stalo plotis: 1 200 mm, stalo ilgis: 2 200 mm, spaudimo jėga: 600 t, garantijos trukmė: 24 mėnesiai, eigos ilgis: 200 mm, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and forming by die. H-type (straight-side) eccentric presses provide high stability and process safety in applications requiring large tables and heavy dies, thanks to their rigid frame construction. The CRONOSSTECH CEHP 600 – H-Type Eccentric Press 600 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. With its monoblock frame, eight-guided ram, hydraulic overload safety device, and automatic lubrication infrastructure, it offers reliable performance suitable for continuous production environments. Key advantages - Stable operation with large dies thanks to a 2200×1200 mm table size - Die and equipment protection with hydraulic overload safety Ijdpfx Aox N R A Usf Ieht - Precision guidance with 8-way guided ram and balancer piston - Controlled and user-friendly operation with PLC + touchscreen - High operator safety with light curtain protection Application areas - Punching/cutting/forming applications requiring large tables - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-way guided ram • Adjustable stroke with single connecting rod • Ram with balancer piston • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reversing motor • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain safety barrier • Enclosed oil reservoir with gear assembly • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety cover for front of the table • Die manufactured to required specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 600) Capacity: 600 Ton Table–Ram Distance: 500 mm Housing Width (Between Columns): 2350 mm Ram Adjustment: 120 mm Press Width: 3100 mm Press Depth: 3500 mm Press Height: 5200 mm Table Dimension: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 90 kW Weight: 77,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Sąlyga: naujas, Gamybos metai: 2018, mašinos/transporto priemonės numeris: DF0163, Pressure: 800 t Column gap: 1200 mm Stroke: 500 mm Total connected load: 85 kW Approximate machine weight: 40 t Dimensions (L x W x H): 4100 x 3500 x 6650 mm Return force: 80 t Main cylinder: 1 unit Column diameter: 250 mm Installation height (distance between work table and ram plate with cylinder retracted): 1000 mm Table size: 1300 x 1100 mm Isdodxvfpepfx Af Ijht Ram area: 1300 x 1100 mm Ram height: 800 mm Table height above floor approx.: 950 mm Max. table load: 5 t Approach speed: 250 mm/sec Return speed: 150 mm/sec Oil tank: 1000 l Working speed at beginning: 10 mm/sec Hydraulic system and tank mounted on top of the press: included? All-round maintenance platform: included? Side panels: included? Light barriers front and rear: included? Right-side monitored door: included (800 x 530 mm)? Left-side monitored door: included (800 x 530 mm)? Electrical oil cooling and thermal insulation of ram and table by means of a 30 mm thick insulation plate Table deflection according to DIN: maximum 0.2 mm Ejector pressure: 150 tons Ejector stroke: 200 mm Ejector speed: 70 mm/sec

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2021, darbinis plotis: 3 060 mm, atstumas tarp stulpų: 3 060 mm, bendras plotis: 3 100 mm, spaudimo jėga: 100 t, Servo-electric press brake SAFANDARLEY type E-Brake 100-3100 NS Available with WILA or AMADA tooling systems Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - Press force: 100 T - Bending length: 3060 mm - Stroke: 300 mm - CNC control in Y1 / Y2 / X / R / Z1 / Z2 axes - Backgauge controlled in 4 CNC axes: X / R / Z1 / Z2 Ihodsv Edu Dopfx Af Ist - 2D graphical control - EC20 model - Light curtain - programmable - WILA tooling system - upper clamp or AMADA (optional) - WILA tooling system - lower clamp, compatible with 4V / 2V / 1V / T-type dies with a 60 mm base - Lower beam compensation

Gamybos metai: 2007, Sąlyga: labai geros būklės (naudotas), I am selling a Detel M-13 multi-spindle horizontal dowel drilling machine, year of manufacture 2007. 3-spindle Perske motor 2.0 kW Very good condition. Ihsdpfx Ajhua Rpef Ist Available immediately.

Sąlyga: naudotas, Gamybos metai: 1998, Spausdintų kopijų skaičius: 76 mln. Maks. spausdinimo greitis lakštų: 15 000/h Maks. lakšto formatas: 37 x 52 cm Drėkinimo sistema: Alcolor Plokštelių įtempimo įtaisas: Autoplate Iedpfx Afjw Ny Tne Ieht Mašinos valdymas: CPC 1-04

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: 4273, Pressure: 110 t Table length: 1200 mm Table width: 1000 mm Max. stroke: 1150 mm Dimensions (L x W x H): 4200 x 2400 x 4800 mm Retraction force: 11 t Max. stroke: 1150 mm Weight: 16 t Table travel: 1200 mm Swivel table: 45 degrees Max. table load: 12 t Movable table speed: 25 mm/sec Table swivel speed: 10 mm/sec Drive power: 23 kW Voltage: 400 V Control voltage: 24 V DC Frequency: 50 Hz Adjustable working speed: 0 - 10 mm/sec Return speed: 130 mm/sec Rapid traverse speed: 195 mm/sec Machine colour: Grey RAL 7035 Movable part colour: Orange RAL 2009 Ihedped Ap Ugsfx Af Ijt Other component colour: Dark grey RAL 7021 Oil tank: 400 l Recommended oil: DIN HLP / ISO VG 46

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2015, mašinos/transporto priemonės numeris: 4293, Pressure: 40 t Table length: 1000 mm Table width: 700 mm Installation height (distance between worktable and ram plate): 1200 mm Number of cylinders: 1 unit Stroke length: 1200 mm Table height above floor: 700 mm Pull-out table travel: 1200 mm Table traverse speed: 25 mm/sec Tiltable table: 45 degrees Maximum table load: 5 t Top tool foldable: 170 degrees Clearance between columns: 1250 x 1000 mm Maximum rapid approach speed: 95 mm/sec Return speed: 80 mm/sec Working speed: 0 - 10 / 10 - 155 mm/sec Dimensions (L x W x H): 4300 x 2700 x 4500 mm Total weight (without operating fluids): 8.5 t Siemens monitor: 9 inch Sick light sensors: 1200 mm The columns and cylinders are manufactured from tool steel SAE 1045 (identical to German standard C45), surface induction hardened and chrome-plated. Control system functionality: The linear scale continuously reports the position of the ram to the control system. The traverse distance, the upper stop position, and the switchover point at which the press switches from rapid traverse to working speed, as well as the final position to be reached, can be easily and quickly set via the monitor control. The working speed can be set in steps of 1 mm/sec within the range 0 to 10 mm/sec, and in steps of 10 mm/sec within the range 10 to 155 mm/sec. The control system monitors the safeguarded areas, the entire hydraulics, as well as the pump, and is housed in a separate control cabinet. The press is operated via a control panel mounted on a swing arm, reducing walking distances. Scope of delivery includes: Manuals and operating instructions for the motors, pumps and the press itself CE Declaration. The machine complies with the EU Machinery Directive 2006/42/ Hydraulic presses. Isdjdxrqxjpfx Af Ieht

Gamybos metai: 2019, Sąlyga: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: DF0137,