Vielos Edm Mašina pirkti naudotą (14 182)

Sąlyga: paruoštas naudoti (naudotas), Two identical machines are available. Connected load: 32 kW, length: 3500 mm, width: 2400 mm, height: 2400 mm, weight: 3 t. An on-site inspection is possible. Bedpfx Adsuyk Rljmelr

Sąlyga: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 1 000 kg, X ašies eiga: 400 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 400 mm, bendras aukštis: 2 230 mm, bendras ilgis: 1 800 mm, bendras plotis: 1 600 mm, ruošinio aukštis (maks.): 400 mm, ruošinio plotis (maks.): 500 mm, ruošinio ilgis (maks.): 850 mm, bendras svoris: 2 500 kg, Charmilles Robofil 310 Year of manufacture: 1995 Bodjw Hxqnopfx Admolr Travel paths (X/Y/Z): 400 x 250 x 400 mm Travel paths (U/V): 400 x 250 mm Taper angle: +/- 30° at 400 mm height Max. workpiece dimensions (width x depth x height): 850 x 500 x 400 mm Max. workpiece weight: 1000 kg Collision protection in X/Y/U/V/Z Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2230 mm Machine weight: 2500 kg The machine was in operation at our customer’s site until recently and is available immediately.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Travel distances: x 400 mm y 300 mm z 220 mm Wear-free tubular direct drive Water bath Bljdpfxsm Uyuxe Admjr Incl. chiller Automatic wire threading

Gamybos metai: 2002, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: J20M0036, Wire EDM machine with automatic wire threading (AT) TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Amperage: 50 A Table length: 780 mm Table width: 630 mm Table feed rate: 1 – 1,300 mm/min Blsdpfx Adenh R Nkemjr Wire feed rate: 15.00 m/min Control unit: W21F AP-2 Workpiece dimensions: 1,050 x 800 x 295 mm Workpiece weight: max. 800 kg MACHINE DETAILS Total power requirement: 12.00 kW Machine weight: approx. 4.50 t Space requirements: approx. 3.00 x 3.50 x 2.50 m

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, veikimo valandos: 24 088 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 073C1923, ruošinio svoris (maks.): 1 000 kg, X ašies eiga: 550 mm, Y ašies eiga: 370 mm, Z ašies eigos atstumas: 410 mm, bendras svoris: 3 100 kg, TECHNINĖS DETALĖS Eigos X ašies eiga: 550 mm Y ašies eiga: 370 mm Bodew Nf R Ejpfx Admjlr Z ašies eiga: 410 mm U ašies eiga: 120 mm V ašies eiga: 120 mm Didžiausias ruošinio svoris: 1 000 kg ĮRENGINIO DETALĖS Svoris: 3 100 kg Mašinos darbo laikas: 24 088 h

Gamybos metai: 2001, Sąlyga: geras (naudotas), Traverse paths X / Y / Z: 220 x 150 x 150 mm Z-axis device: Standard equipment (= 5th axis) Maximum taper angle: 15° (for workpiece 100 mm thick) Taper cutting device: Standard equipment (= 3rd and 4th axes) Blsdpfjg Icdyjx Admer Wire diameter: 0.03 – 0.25 mm Dimensions L x W x H: 1900 x 2345 x 2060 mm Weight: 3500 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Sąlyga: paruoštas naudoti (naudotas), Travel distances X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm–0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Blodpfsuqacksx Admsr

Sąlyga: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 331965, ruošinio svoris (maks.): 500 kg, X ašies eiga: 400 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 200 mm, bendras aukštis: 2 180 mm, bendras ilgis: 1 800 mm, bendras plotis: 1 600 mm, ruošinio aukštis (maks.): 200 mm, ruošinio plotis (maks.): 500 mm, ruošinio ilgis (maks.): 850 mm, bendras svoris: 2 190 kg, Charmilles Robofil 290P Year of manufacture: 2001 Travel paths (X/Y/Z): 400 x 250 x 200 mm Travel paths (U/V): 400 x 250 mm Taper angle: +/- 30° at 200 mm height Max. workpiece dimensions (width x depth x height): 850 x 500 x 200 mm Max. workpiece weight: 500 kg Programmable pressure levels Injection pressure upper nozzle: 0...11.5 bar Injection pressure lower nozzle: 0...11.5 bar Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2180 mm Machine weight: 2190 kg The machine was in use at our customer’s facility until recently and is now immediately available. Bledpfx Aew Htdpsdmsr

Gamybos metai: 2003, veikimo valandos: 10 000 h, Sąlyga: paruoštas naudoti (naudotas), Allgemeine Daten Breite: 1513 mm Tiefe: 1685 mm Höhe: 1962 mm Maschinengewicht: 1500 kg Steuerung Hersteller: BROTHER Modell: CNC-A50 Hauptantrieb Anzahl Achsen: 5 Bedpfxowm Spks Admolr Verfahrwege X-Achse: 410 mm Y-Achse: 260 mm Z-Achse: 170 mm Werkstück Werkstückgewicht: 350 kg Diese 5-Achsen Brother HS-70A Drahterodiermaschine wurde im Jahr 2003 hergestellt. Sie ist mit einer CNC-A50 Steuerung ausgestattet, verfügt über Verfahrwege von 410 x 260 x 170 mm und eignet sich für Werkstücke bis 350 kg. Der Drahtdurchmesser reicht von 0,1 bis 0,3 mm und ermöglicht präzises Schneiden. Wenn Sie eine hochwertige Erodierlösung suchen, empfehlen wir die Brother HS-70A, die wir zum Verkauf anbieten. Kontaktieren Sie uns gerne für weitere Informationen zu dieser Maschine. Anwendungsgebiete Erodieren

Sąlyga: paruoštas naudoti (naudotas), Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel path X/Y/Z: 500mm/350mm/300mm, max. table feed rate: 1300mm/min, wire diameter range: 0.1mm-0.3mm, max. wire feed: 15m/min, U/V travel: +/-32mm, max. taper angle: 15°. Machine dimensions X/Y/Z: approx. 1900mm/2650mm/2100mm, weight: approx. 3500kg. Including generator unit and automatic wire threading (AT). Documentation available. On-site inspection possible. Bodjvb Hbrjpfx Admelr

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium Control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes automatic drop-door tank Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Bedjw D Accepfx Admslr Cutting speed of 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of the complete system: 2600 x 2600 x 2340 mm Total weight of the system: 3,300 kg The machine will be cleaned, fully overhauled, and tested on all functions after receipt of order. You will receive a 6-month warranty on the machine. We are happy to offer you machine commissioning as an additional service.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 800 kg, X ašies eiga: 500 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 256 mm, bendras aukštis: 2 220 mm, bendras ilgis: 2 400 mm, bendras plotis: 2 800 mm, ruošinio aukštis (maks.): 250 mm, ruošinio plotis (maks.): 650 mm, ruošinio ilgis (maks.): 1 050 mm, bendras svoris: 4 500 kg, AGIECUT Vertex 3, Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V axis travels: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Blsdpfx Asw Dn Svedmjr Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.05 µm Available wire diameters: 0.07 – 0.33 mm Submerged cutting machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER handbox for convenient setup Including AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of your order. Including user training at Techma on your overhauled machine Optional: Transport, commissioning, training, chiller

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 400 kg, X ašies eiga: 350 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 250 mm, bendras aukštis: 2 200 mm, bendras ilgis: 2 500 mm, bendras plotis: 2 500 mm, ruošinio aukštis (maks.): 250 mm, ruošinio plotis (maks.): 680 mm, ruošinio ilgis (maks.): 900 mm, bendras svoris: 3 000 kg, The GF AgieCharmilles CUT 20P, built in 2013, is a powerful and precise used wire EDM machine specifically designed for demanding machining tasks in the metalworking industry. Thanks to state-of-the-art technology and intelligent controls, the CUT 20P offers superior cutting quality, minimal maintenance requirements, and excellent return on investment. Main Features & Benefits: ✅ Compact Machine: Workpiece size: max. 900 x 680 x 250 mm Maximum workpiece weight: 400 kg Travel axes: X/Y/Z: 350 x 250 x 250 mm U/V: ± 45 mm Taper cutting up to ± 25° / 80 mm ✅ High-Precision Machining: Positional accuracy via glass scales Bodpfxow Dn Rlj Admolr Automatic wire tensioning for consistently precise cutting results Surface finish up to Ra < 0.25 µm ✅ Efficient Wire System: Wire diameter: 0.15 – 0.30 mm Automatic wire feed and re-threading 25 kg wire spool for extended operation ✅ Intelligent Control & User Friendliness: Windows-based control with intuitive user interface 15” LCD display for easy programming DXF import & 3D graphic check for accurate simulations ✅ Reliability & Low Operating Costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs due to robust design and long-lasting wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool & Die Making ✔ High-precision Components ✔ Series Production & Prototyping Experience top productivity with the GF AgieCharmilles CUT 20P – the perfect choice for accurate and cost-effective wire EDM cutting! 📌 Our used machine from 2013 will be cleaned, refurbished, and thoroughly tested prior to sale to ensure the highest quality and reliability. 📩 Contact us for a tailored offer or to arrange a demonstration! We are also pleased to offer commissioning and training on the machine as additional services.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, GF AgieCharmilles CUT 2000X Year of manufacture: 2018 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travel: +/- 70 mm Maximum taper angle: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface finish: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm, including KIT 50 option Includes automatic wire changer (AWC) Water bath machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes glass scales for X and Y axes Bledpfxst I Dtno Admor VISION 5 control 15" LCD color display, touch keyboard and mouse Includes Conic-Plus option for improved tapering Includes Threading Expert Dimensions (L x W x H): 2095 x 1950 x 2232 mm Net weight: 3,600 kg The machine will be completely overhauled and tested by us. Customized test cuts are available upon request. We also offer on-site commissioning and training for this machine.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, AGIECUT Excellence 2F eCUT Year of manufacture: 2006 Travel (X/Y/Z): 350 x 250 x 256 mm Travel (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (LxWxH): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.1 µm Ra Max. cutting speed in cylindrical cut: 300 mm²/min Available wire diameters: 0.07 – 0.33 mm Including AGIE universal clamping frame Including AGIE JOGGER hand pendant Including control console with 4x USB ports Including AGIE-Setup 3D Bsdpfswwr H Rox Admolr The machine has been cleaned, overhauled, and thoroughly tested by our technicians. Commissioning and training services are also available upon request.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 3 000 kg, X ašies eiga: 800 mm, Y ašies eiga: 550 mm, Z ašies eigos atstumas: 525 mm, GF AgieCharmilles Progress V4 Year of manufacture: 2008 Bedpfxjwvqwre Admolr Travel distances: X= 800 mm, Y= 550 mm, Z= 525 mm Travel axes: U= 800 mm, V= 550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3000 kg Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and automatic re-threading after wire breakage With automatic front door Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (L x W x H): 2900 x 3050 x 2850 mm Net weight: 6000 kg The machine is cleaned and completely overhauled at our facility after order confirmation. You will receive a 6-month warranty on all machine components. Start-up and operator training can also be offered upon request.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 450 kg, X ašies eiga: 350 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 256 mm, bendras aukštis: 2 220 mm, bendras ilgis: 1 640 mm, bendras plotis: 2 040 mm, ruošinio aukštis (maks.): 250 mm, ruošinio plotis (maks.): 750 mm, ruošinio ilgis (maks.): 550 mm, tuščias svoris: 2 580 kg, Įranga: dokumentacija / vadovas, AGIECUT Progress 2 Year of manufacture: 2004 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface quality: Ra: 0.30 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axis for increased precision Bjdpfjwvqk Sjx Admolr Available wire diameters: 0.20 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Incl. AGIEJOGGER handbox for convenient setup AGIE IPG generator with power module AGIEVISION control unit Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are thoroughly cleaned and overhauled upon receipt of the order. Afterwards, a test cut with best surface quality is performed for approval. We are pleased to offer on-site commissioning and training. Optional: - Transport - Chiller unit - Clamping devices

Gamybos metai: 2005, Sąlyga: visiškai atnaujintas (naudotas), AGIECUT Progress 3 Year of manufacture: 2005 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (in the tank) / 800 kg (without tank) Achievable surface quality: Ra: 0.30 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.20 – 0.33 mm Bodpjgzv Scofx Admslr Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage Maximum threadable height: 420 mm Featuring manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG high-performance generator AGIEVISION control system Dimensions (Length x Width x Height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be fully overhauled and thoroughly tested by us. You will receive a 6-month warranty on the machine. We are also happy to offer commissioning and training services.

Gamybos metai: 2008, Sąlyga: visiškai atnaujintas (naudotas), AGIECUT Challenge V3, Year of manufacture: 2008 Travel ranges: X= 500 mm, Y= 350 mm, Z= 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Submerged wire EDM machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand box for convenient setup Including AGIESETUP 3D AGIEVISION 5 CNC control AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled, and thoroughly tested by us after order receipt. Including operator training at Techma on your refurbished machine Blsdpfx Adjm Amf Demjr Optional: Transport, commissioning, training, chiller

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, GF AgieCharmilles Classic V3 Year of manufacture: 2008 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Incl. AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine has already been cleaned, thoroughly overhauled, and tested in our facility. We are happy to offer you a customized test cut upon request. You will receive a 6-month warranty on all machine components. We are also pleased to offer commissioning and training services. Bledsv Hbygepfx Admor

Gamybos metai: 2007, Sąlyga: visiškai atnaujintas (naudotas), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Bljdpfx Adsmmfwuomer Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading in case of wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handheld control for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine will be cleaned and completely overhauled after receiving your order. You will receive a 6-month warranty on all machine parts. Commissioning and training are also available upon request.

Gamybos metai: 2000, Sąlyga: visiškai atnaujintas (naudotas), AGIECUT Challenge 3 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Blsdpfofdl N Iox Admer Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.3 µm Average contour tolerance Tkm: +/- 5 µm Available wire diameters: 0.20 – 0.33 mm Submerged-cutting machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand box for easy setup Including AGIESETUP 3D AGIEVISION control AGIE HSS generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg Including 6-month warranty; On request, we can commission the machine and provide on-site training.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, The GF AgieCharmilles CUT 30P, year of manufacture 2011, is a powerful and precise used wire EDM machine specifically designed for demanding machining tasks in the metalworking industry. Equipped with state-of-the-art technology and intelligent control, the CUT 30P delivers top-tier cutting quality, minimal maintenance requirements, and excellent return on investment. Main Features & Benefits: ✅ Large Working Area: Workpiece size: max. 1050 x 800 x 350 mm Maximum workpiece weight: 1,000 kg Travel paths: X/Y/Z: 600 x 400 x 350 mm U/V: ± 50 mm Taper cutting up to ± 25° / 80 mm ✅ High-Precision Machining: Positioning accuracy ensured by glass scales Automatic wire tensioning for consistently precise cut results Surface finish up to Ra < 0.25 µm ✅ Efficient Wire System: Wire diameter: 0.15 – 0.30 mm Automatic wire feeding and re-threading 25 kg wire spool for extended operating times ✅ Intelligent Control & User-Friendliness: Windows-based control system with intuitive user interface 15” LCD display for straightforward programming DXF import & 3D graphic verification for precise simulation ✅ Reliability & Low Operating Costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs thanks to robust design and long-life wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool and mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT 30P – the perfect choice for precise and economical wire EDM processing! 📌 Our pre-owned 2011 machine is thoroughly cleaned, refurbished, and comprehensively tested prior to sale to ensure top quality and reliability. 📩 Contact us for a personalized quote or a demonstration! Bljdev S Ua Dopfx Admor We are happy to also offer you commissioning and training on the machine.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, AGIECUT Classic 2S Year of manufacture: 2001 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travels: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Blodpfx Adov Dkvrjmsr Maximum workpiece weight: 200 kg (in water bath) / 450 kg (without water bath) Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Incl. AGIEJOGGER hand-held box for convenient setup AGIE HSS-C generator AGIEVISION control unit Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and thoroughly overhauled upon receipt of order. Afterwards, a test cut is performed with optimal surface quality for acceptance. You receive a 6-month warranty on the machine. Commissioning and on-site training can be offered upon request.

Gamybos metai: 2006, Sąlyga: visiškai atnaujintas (naudotas), AGIECUT Challenge 3 eCut Year of manufacture: 2006 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm Travel paths U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Blodpfx Aegfm Rredmsr Achievable surface finish: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Submerged wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Including AGIEJOGGER hand box for convenient machine setup Including AGIESETUP 3D AGIEVISION control system AGIE generator with eCut technology for faster and more efficient machining Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us after receiving your order. Afterwards, we will commission the machine at your site. You will receive a 6-month warranty on the machine. We are also pleased to offer you the following additional services: - Control and maintenance training - Chiller unit - Programming system - Consumables - Clamping tools - Transportation