Ultragarsiniai Valymo Sistema pirkti naudotą (18 904)

Gamybos metai: 2020, būklė: naujas, Ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings. Njdofzk Ewopfx An Iect Materials ROMER ultrasonic cleaning systems are constructed using stainless steel, providing protection against acids. The tanks feature additional insulation walls to prevent heat loss and ensure faster heating. High-quality materials guarantee a long service life of the vibrating components. Heating System The ROMER bath heaters are made of premium materials and high-temperature resistant ceramic elements. The heating system delivers high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Ultrasonic Transducers The ultrasonic elements used in ROMER cleaning machines are installed in submersible modules, which better reflect the vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the component being washed. Lower frequencies are used for large, high-strength parts, while higher frequencies suit jewelry, delicate mechanical systems, and similar applications. All transducers are connected using high-temperature resistant cables.

Gamybos metai: 2020, būklė: naujas, Ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings. Ncodpfx Aefz I N Tsn Ijt Materials ROMER ultrasonic cleaning systems are constructed using stainless steel, providing protection against acids. The tanks feature additional insulation walls to prevent heat loss and ensure faster heating. High-quality materials guarantee a long service life of the vibrating components. Heating System The ROMER bath heaters are made of premium materials and high-temperature resistant ceramic elements. The heating system delivers high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Ultrasonic Transducers The ultrasonic elements used in ROMER cleaning machines are installed in submersible modules, which better reflect the vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the component being washed. Lower frequencies are used for large, high-strength parts, while higher frequencies suit jewelry, delicate mechanical systems, and similar applications. All transducers are connected using high-temperature resistant cables.

Gamybos metai: 2020, būklė: naujas, ROMER® is the largest manufacturer of powder coating equipment in Poland and one of the largest in Europe. ROMER® consists of over 10,000 manufactured units that are used in more than 45 countries worldwide. Njdpfxjfzq Rye An Ijct ROMER® produces individual technological devices for powder coatings as well as complete, fully automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for the equipment we sell, with a full range of spare parts available.

Gamybos metai: 2020, būklė: naujas, Ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings. Materials ROMER ultrasonic cleaning systems are constructed using stainless steel, providing protection against acids. The tanks feature additional insulation walls to prevent heat loss and ensure faster heating. High-quality materials guarantee a long service life of the vibrating components. Heating System The ROMER bath heaters are made of premium materials and high-temperature resistant ceramic elements. The heating system delivers high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Ultrasonic Transducers Ncedpfx Ajfz Aw Hen Ijt The ultrasonic elements used in ROMER cleaning machines are installed in submersible modules, which better reflect the vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the component being washed. Lower frequencies are used for large, high-strength parts, while higher frequencies suit jewelry, delicate mechanical systems, and similar applications. All transducers are connected using high-temperature resistant cables.

Gamybos metai: 2020, būklė: naujas, The company ROMER is also involved in the production of overhead conveyor systems. Cross transfers (cross transports) are designed and manufactured for specific installations. Examples of such equipment are listed below: conveyor systems. Depending on customer requirements, the conveyor systems can move on the ground or be suspended from rails. - For efficient solutions in manual installations, we recommend suspended crossbeams (cross transport). - In automated systems, chain conveyors are most commonly used, as they operate continuously and offer an excellent solution for companies focused on quality and process repeatability. Ncsdofz Difjpfx An Iet - For companies that manufacture different products simultaneously and, for example, operate multiple booths with different colors, flexible solutions using a non-powered conveyor are implemented. This is the most expensive option.

Gamybos metai: 2020, būklė: naujas, Ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings. Materials ROMER ultrasonic cleaning systems are constructed using stainless steel, providing protection against acids. The tanks feature additional insulation walls to prevent heat loss and ensure faster heating. High-quality materials guarantee a long service life of the vibrating components. Heating System The ROMER bath heaters are made of premium materials and high-temperature resistant ceramic elements. The heating system delivers high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Ultrasonic Transducers Ncedpfxsfz Dtzo An Ist The ultrasonic elements used in ROMER cleaning machines are installed in submersible modules, which better reflect the vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the component being washed. Lower frequencies are used for large, high-strength parts, while higher frequencies suit jewelry, delicate mechanical systems, and similar applications. All transducers are connected using high-temperature resistant cables.

Gamybos metai: 2020, būklė: naujas, The company ROMER is also involved in the production of suspended transport systems. Cross traverses (cross conveyors) are designed and manufactured for specific installations. Examples of equipment are listed below: transport systems. Depending on customer requirements, the transport systems can operate on the floor or be suspended from rails. Nsdpsfz Dibofx An Ijct - For convenient solutions for manual operations, we recommend suspended cross beams (cross conveyors). - In automated systems, chain conveyors are most frequently used; these operate continuously and represent an excellent solution for companies focusing on process quality and repeatability. - For companies that produce different items simultaneously, such as operating several booths with different colors, flexible solutions using non-powered conveyors are implemented. This is the most expensive option.

Gamybos metai: 1998, būklė: naudotas, Temperature: 200-210 °C Throughput speed: 1000 mm/min Maximum workpiece length: 200 mm Total power requirement: 50 kW Machine weight approx.: 2.0 t Convection reflow soldering system for printed circuit boards (PCBs) Soldering system for PCBs (e.g., SMD and/or mixed technology) and for curing SMD adhesives The soldering system operates with the following processes: loading – preheating – soldering – cooling – unloading. - with software functions - can be integrated into a production line Additional technical specifications: - Protective atmosphere using nitrogen 30 m³/h; 6 - 10 bar overpressure Ncodpfx Ansu Rwauo Iet - Water requirement: 20 liters/min; 2 - 5 bar overpressure - Extraction air volume: 1000 m³/h - Electrical operating power: 12 kW - Space requirements: L: 6500 + loading station 2000 x W: 1400 x H: 2100 mm Additional equipment included: - Automatic stacking unit LSB 03 with loading head and discharge conveyor for holding, e.g., PCBs. - Machine is CE98 certified System suitable as a source of spare parts or for conversion or extension. Sold as is, at clearance price.

Būklė: naudotas, Gamybos metai: 2002, Technical details: Ncodpfx Aju Nzwuon Iot Rated power: 1670 kVA Rated power: 1500 kW Voltage: 400 V / 50 Hz Operating hours: 800 h This UPS system is ideally suited for uninterrupted operation under demanding environmental conditions, as often encountered in industrial applications. Suitable for stabilising, among other things, power supply systems. The UPS unit consists of the Powerbridge (a flywheel with an attached generator) and a Uniblock (electromotor/generator unit). The Uniblock supplies power to the customer modules in the absence of any mains fault. The Powerbridge serves as an energy storage device. In the event of a mains failure, the Powerbridge temporarily takes over the power supply (at full load, the supply is maintained for 39 seconds). Energy storage type PB60+ with a bridging time of 39 sec. A diesel engine is coupled via a freewheel clutch. This means that as soon as the engine reaches the speed of the Uniblock, it accelerates the generator to synchronous speed and thus takes over the power supply. (At the same time, the Powerbridge is recharged)

Gamybos metai: 1998, būklė: naudotas, Technical details: Total power requirement: 1.1 kW Airflow rate: 900 m³/h Filter surface area: 6.0 m² Filter: 1 unit Approx. machine weight: 125 kg Ncsdpfju N Ad Nsx An Ijt Dimensions (L x W x H): 0.74 x 0.62 x 1.8 m Areas of application: Extraction of grinding dust; with alternative filter inserts, also suitable for welding fume extraction - mobile unit on casters - with coarse particle collection bin - cleaning interval adjustable up to 60 sec. - pulse cleaning, automatically activated after the unit is switched off - filter separator Further technical specifications: - Separation area: 6.0 m² - Separation efficiency: over 99% - Cleaned air remains in the workspace - Cartridge filter inside the unit: Ø 400 mm, length 270 mm - Filter replacement by hand (service door)

Būklė: naudotas, Technical details: Welding current: 500 A Length: 1200 mm Height: 1260 mm Connected load: 26.6 kVA Power rating: 100 kW Open-circuit voltage: 65 V Ncjdewrq Txspfx An Iet Approx. machine weight: 147 kg Machine dimensions: 1.2 x 0.45 x 1.2 m Welding cable with welding torch

Būklė: naudotas, Technical Details: Airflow rate: - m³/h Inlet port diameter: 60 x 40 mm Drive power: - kW Rotational speed: 2,800 rpm Electrical specification - Voltage/Frequency: 220/50-60 V/Hz Weight: approx. 48 kg Dimensions (L x W x H): 600 x 580 x 600 mm Total power requirement: 1.5 kW Ncodpfxswvibie An Iet Operating principle: Filtration/extraction of pure and emulsified oil mist, smoke, dust, and metal chips. Two units are available for sale.

Būklė: naudotas, Technical Details: Output at 100% duty cycle: 400 A Output: 60% duty cycle = 500 A Ncodpfxou Nwc Ho An Iet Welding current: DC Machine weight approx.: 230 kg Power: 21 kVA Welding rectifier MIG / MAG Cooling type F, water-cooled Protection class IP 23 Insulation class F Including wire feed unit for 1.2 mm wire, feed speed 0.5 - 20 m/min Ground cable/clamp NEW 4 meter hose package NEW

Būklė: naudotas, Gamybos metai: 2019, Techninės detalės: Ncjdpfxeu Nwhij An Ijt Įtampa: U1: 400V V Tuščios eigos įtampa: 70 V Mašinos svoris apie: 100 / įrenginys kg Mašinos matmenys: apie 0,85 x 0,37 x 1,25 vienam įrenginiui, m Parduodami 4 Fronius TransPuls suvirinimo įrenginiai Tinka pramoninei paskirčiai, pvz., robotams. Panaudojimo sritys: "CMT" suvirinimo procesas, visiems MIG/MAG suvirinimo darbams Mobilus, 4 ratukai / iš jų 2 pasukami Su vielos padavimo mechanizmu, tipas: VR 7000-CMT: Vielos padavimo greitis 0,5 - 22 m/min.; tinkamas vielos Ø: 0,8 - 1,2 mm Nuotolinio valdymo pultas RCU5000i univoSD 1 metro tarpinis žarnų paketas Transportavimo vežimėlis Apsaugos klasė IP 23 Aušinimo tipas AF Valdymas per RCU 5000i ekraną i.D.

Būklė: naudotas, Technical details: Intake nozzle diameter: 380 mm Filter area: 610 x 660 + 560 x 470 + 570 x 470 mm Total power requirement: 4.0 kW Dimensions (L x W x H): 0.6 x 1.1 x 2.2 m Njdpfx Anju Nwwdj Ioct - 2x intake nozzles on the bottom left/right: Ø 300 x 200 / Ø 200 x 170 mm - Exhaust opening (W x H): 280 x 145 mm - 3 insert filters - with wall mounting

Būklė: naudotas, Gamybos metai: 1994, Technical details: Welding current steplessly adjustable: 40...400 A Length: 900 mm Height: 1200 mm Total power requirement: 13.8 kVA Machine weight approx.: 180 kg Nodpfx Aneu Nwx Uo Iect Space requirement approx.: W:0.6 x L:0.9 x H:1.2 m MIG MAG WELDING MACHINE – welding rectifier offered as a donor for spare parts - Output range: 40A/15V to 400A/34V - Open-circuit voltage: 58V - Characteristic: Constant - Protection rating: IP 23 - Insulation class: F - Water cooling A5 circuit board missing

Būklė: naudotas, Technical details: Tank capacity: – l Nodpfx Aneu Nw Ens Iect Voltage: 230 / 50 V / Hz Approx. machine weight: System is dismantled kg REVERSE OSMOSIS SYSTEM The system is dismantled. We are selling the system/parts at a clearance price! Areas of application, e.g.: All types of contaminants are filtered. For example: bacteria, viruses, pesticides, nitrate, fertiliser residues, lime, salts The system was preserved in 2014 As is.

Gamybos metai: 1981, būklė: naudotas, Techniniai duomenys: Keliamoji galia: 0,63 t Šakių ilgis: 680 mm Mašinos svoris: apie 55 kg Matmenys (I x P x A): apie 0,8 x 0,7 x 1,0 m Tai krano šakės / pakrovimo šakės. Krano šakių dydis: ilgis 730 x plotis 60 mm, U formos, vidurio atstumas 560 mm Njdpovwipqofx An Ijct Kranų tvirtinimas: pasukama konstrukcija su amortizaciniu cilindru Ø 80 x 180 mm; krano kablio tvirtinimas Ø 30 x 80 mm 4 reguliuojami laikikliai galinėje pusėje

Būklė: naudotas, Gamybos metai: 1997, Microflow Isolator – Glove Box Ncodsvw I Npspfx An Iet Glovebox Isolator The unit is unused. Equipped with microfilter extraction type 112108614A36, capacity 1870 m³/h With 2 transfer chambers (for loading and unloading of materials) Inlet/outlet size: W:400 x D:260 x H:430 mm Illumination 2 glove ports Castors (unit is mobile) Front window made of polycarbonate Internal dimensions: W:1200 x D:650 x H:100 mm Machine dimensions: W:2100 x D:850 x H:2100 mm Weight: approx. 400 kg

Gamybos metai: 1998, būklė: naudotas, Technical Details: Temperature: 200-210 °C Conveyor speed: 1000 mm/min Max. workpiece length: 200 mm Ncjdpfx Anju Rnd Do Iot Total power requirement: 50 kW Machine weight approx.: 2.0 t Convection Reflow Soldering System for Printed Circuit Boards Soldering system for printed circuit boards (e.g. SMD type and/or mixed assembly) and for curing SMD adhesives Soldering system operates with the following stages --> Infeed - Preheat - Soldering - Cooling - Outfeed. - with software functions - can be integrated into a production line Additional technical specifications: - Protective gas with nitrogen 30 m³/h; 6 - 10 bar overpressure - Water requirement: 20 litres/min; 2 - 5 bar overpressure - Exhaust air volume: 1000 m³/h - Electrical operating power: 12 kW - Space requirements: L: 6500 + loading station 2000 x W: 1400 x H: 2100 mm Additional equipment included: - Automatic stacking device LSB 03 with loading head and outfeed conveyor for e.g. PCB handling. - Machine is CE98 certified Suitable as a source of spare parts or for conversion/expansion. Sold as is. Priced for quick sale.

Būklė: naudotas, Detalii tehnice: Curent de sudare: 330A / 50% și 210A / 100% Grad de protecție: IP 23 Consum total de putere: 13,8 kVA Greutate utilaj aprox.: 71 kg Dimensiuni utilaj: 0,95 x 0,60 x 0,90 m - MIG / MAG / MIG și electrod Ncodpfx Anju Nxv Ij Iot - Sistem de răcire cu apă AF - Clasa de izolație B - Domeniu de putere 3A / 20V până la 330A / 34V Control prin interfață robotică

Būklė: naudotas, Technical details: Power consumption: 240 A Nedpfeu U Iixox An Iect Voltage: 3x400 V Open-circuit voltage: 91 V Apparent power: 9.3 kVA Approx. machine weight: 28 kg Machine dimensions: 1.0 x 0.6 x 1.0 m Welding rectifier (inverter) TIG (steel/stainless steel) and manual arc welding Direct current TIG = up to 240 A / 19.6 V MMA welding = up to 240 A / 19.6 V Switchable between 2-stroke/4-stroke, infinitely adjustable pulse operation Protection class IP 23 Water-cooled with antifreeze protection Shielding gas / solenoid valve Torch head gas-cooled with remote control for welding current Equipment: Hose package 7.4 meters Earth clamp and earth cable 4.2 meters

Būklė: naudotas, Gamybos metai: 1999, Techniniai duomenys: Praėjimo aukštis: 2000 mm Talpyklos tūris: 800 l Ciklo trukmė: - sek. Nedpsymc Txjfx An Iect Šildymo galia: 45 kW Elektrinė specifikacija – Įtampa/Dažnis: 400/50 V/Hz Keliamoji galia: 2000 kg Temperatūros diapazonas: maks. 65 °C Bendras energijos poreikis: 63 kW Atidarymo plotis: 2000 mm Užimamas plotas, apytikriai: 3.800 m

Būklė: naudotas, Gamybos metai: 2007, Technical details: Airflow rate: 1100 m³/h Nodpfx Anovvk Ifs Ioct Filter: 1 unit Filter area: 350 x 400 mm Filter type: mechanical Approx. machine weight: 100 kg Dimensions (L x W x H): approx. 0.5 x 0.6 x 1.4 m Oil mist separator – Dry separator with fan - Suction nozzle Ø 195 x 70 mm - Exhaust outlet (W x H): 440 x 150 mm - Fan: 380 V External control

Būklė: naudotas, Gamybos metai: 2017, Technical details: Operating pressure: 12 bar Tank capacity: 200 l Total weight approx.: 220 kg Dimensions (L x W x H): 1.2 x 1.1 x 1.8 m Mobile pressure blasting vessel – sandblasting unit Blasting vessel pressure up to 12 bar Test pressure 17.2 bar Fully equipped with: - Remote control valve - Remote control lever Ncedpjvvvrpsfx An Iot - Electro-pneumatic remote control - Carbide spray nozzle including 10 m nozzle hose inner diameter