Traub Tna 480 pirkti naudotą (88)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Traub CNC Lathe TNC65DGY, TX8I, Year 2005, Serial No. 1130 Description Y-axis on S1, V-axis, 2x C-axis, 2x powered tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, part gripper, bar loader Iemca Master 880MP-E. Condition Very well maintained, good condition, serviced. Machine geometry has been checked and adjusted/set up. The machine can be inspected under power – video also available. Bodpfswi I Eyox Abfelc Warranty 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to the spare parts, not for downtime or labor hours, travel time. The warranty expressly does not cover any parts other than those mentioned above, e.g. wear parts, electrics, electronics, hydraulics, etc.

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Traub CNC Lathe Bsdpfx Aswi Izhjbfolc TNC65DGY, TX8H, Year 2001 • 2x 10-station turrets with live tooling drive VDI30 • C-axis on main and counter spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/counter spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts list, wiring diagram, ATC sensor system Very good condition. Machine can be inspected under power. Machine geometry has been checked and adjusted/set.

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Spindle hours: 26,709 h SUB SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Spindle hours: 16,854 h - Number of turrets: 2 UPPER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 mm - Z stroke: 50 mm - Driven tool speed: 8,000 rpm LOWER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 mm Blsdpeuhawhsfx Abfec * Y travel: -9.5 / +28 mm - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 16 kVA WEIGHT AND DIMENSIONS - Required space: 2,850 x 1,100 mm - Machine height: 1,480 mm - Machine weight: 2,000 kg EQUIPMENT/ACCESSORIES - Control system: Traub TX 8i - Powered guide bushing - Parts catcher - Parts conveyor - Chip conveyor: KNOLL 160 S-1 - Coolant tank: 500 l * with paper filter - Bar feeder: FMB Minimag 18 / 3200 C - Oil mist extractor: UAS SMOG HOG SH-05 - Number of fixed tool holders: 5

Sąlyga: naudotas, CNC ilgo tekinimo automatas TRAUB TNL 12/7 Bsdpfx Asxbtz Ujbfslc

Sąlyga: naudotas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bush): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven stations on turret: 6 - Max. diameter in sub spindle: 12.7 [mm] Bljdpfx Abjuhav Djfoc - Sub spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] ACCESSORIES - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub spindle - Brake for main spindle and sub spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various fixed and driven tool holders

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 mm - Y-axis travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z travel: 35/79.5 mm FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V ACCESSORIES Bljdpfx Asuhaw Uebfjc - CNC control: Traub TX8i - Driven guide bushing - Coolant tank - Bar loader: FMB Minimag

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] EQUIPMENT - Control: Traub TX8i Blodpjuhaxfefx Abfoc - Driven guide bushing - Coolant tank - Bar loader: LNS TRYTON HYBRID

Sąlyga: naudotas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle nose: A2-5 Blodpfx Abjuhadzsfoc - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg MACHINE HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2x HAINBUCH

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machinable length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of live positions: 6 - Travel path X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 4 COUNTER OPERATION - Number of positions: 4 - Number of live positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 18 kW ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts removal device - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 Bjdpfxouhawzs Abfelc - Sleeve: 4 - Set of jaws and collets for bar feeder magazine - Set of spare parts

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z travel: 35/50 [mm] - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of positions: 4 BACKWORKING - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 18 [kW] Bjdpfx Ajuhawusbfolc ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts catcher - Coolant tank: 200 [l] - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Bushings: 4 - Set of sleeves and collets for bar feeder magazine - Tool presetting device

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1994, veikimo valandos: 8 000 h, Funkcionalumas: nepatikrintas, Machine in good condition. Blodev Im Sdspfx Abfjc

Sąlyga: labai geros būklės (naudotas), Traub TNL12 CNC Swiss Talpa: 12 mm Darbo valandos: 25 596 val. Kraft & Bauer gaisro gesinimo sistema Bledpjw R E Adofx Abfjc Popierinis filtras: kompaktiškas juostinis filtras Sukonfigūruota kaip parodyta nuotraukoje (daugiau nuotraukų vėliau) Eksploatuojama nuo 2009 m. (pradžioje demonstracinis modelis) 12 pėdų FMB strypų padavėjas Miglos surinkėjas Drožlių transporteris „Yra 2 staklės“

Sąlyga: geras (naudotas), Gamybos metai: 2007, Traub TNX 65/42 Centro di tornitura e fresatura Anno di costruzione: 2007 N. di serie: 7060107 Entrata in servizio: 2010 Controllo TX 8i-S (controllo basato su Mitsubishi/Traub con motori e azionamenti Mitsubishi) 15 assi CNC 4 torrette X-Y-Z ciascuna con 10 posizioni. Fino a 20 utensili per torretta Mandrino principale e contromandrino con foro passante da 65 mm (contromandrino con lavaggio refrigerante) Comando a pedale per serraggio/sgancio dei mandrini Ricevitore portale azionato da servomotore Sistema di rotazione idraulica con pinza pneumatica per pezzo finito e residuo barra Nastro trasportatore per pezzi finiti Filtro refrigerante a nastro cartaceo RESY Vasca del refrigerante Knoll con controllo della temperatura mediante gruppo frigorifero BKW Pompe del refrigerante ad alta pressione 20 bar e a bassa pressione 8 bar Evacuatore trucioli Knoll Caricatore di barre FMB Turbo 5-55 (nuovo del 2010) 2 portautensili tornitura singoli 2 portautensili tornitura doppi 1 portautensile di troncatura 1 portautensile motorizzato doppio radiale ER portapinza 1 portautensile motorizzato radiale ER portapinza 4 portautensili motorizzati radiali ER portapinza 1 portautensile motorizzato radiale porta frese cilindriche 1 portautensile motorizzato radiale ER portapinza orientabile Bedpfxsq Npqmj Abfolc 2 portautensili motorizzati radiali porta frese a disco 2 portautensili motorizzati assiali porta frese cilindriche 6 portautensili motorizzati assiali ER portapinza 43 ulteriori portautensili su elenco separato (vedi allegato supplementare) Mandrino principale Hainbuch con autocentrante portapinza Contromandrino Rohm autocentrante a 2 griffe 2 set di viti a ricircolo di sfere asse Z e pacchi cuscinetti di ricambio