Traub Tna 400 pirkti naudotą (82)

Būklė: labai geros būklės (naudotas), CNC machine Traub TNL 26 Condition: used, well maintained Cjdehlp Sdepfx Ab Rjgw Sale excluding any warranty

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, veikimo valandos: 19 441 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6000816, tekėjimo ilgis: 50 mm, veleno greitis (maks.): 12 000 aps./min, strypo praėjimas: 12 mm, valdiklio modelis: Mitsubishi TX-8i, priešpriešinio veleno didžiausias greitis: 12 000 aps./min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Cjdpox Hxv Dsfx Ab Rjgw Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool turret I (X/Y) Technology: Turret with 6 stations (fully powered) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool turret II (X/Z) Technology: Turret with 6 stations (fully powered) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front attachment Number of stations: 4 Tool holder: Ø28 mm Pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear attachment Number of stations: 4 Tool holder: Ø28 mm Pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control: Mitsubishi TX-8i Dimensions & Weight Spindle height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with electrical cabinet, max. configuration: 2,000 kg Weight without electrical cabinet, max. configuration: 1,600 kg Weight with electrical cabinet, min. configuration: 1,200 kg Weight without electrical cabinet, min. configuration: 850 kg Operating hours Control on-time: 19,441 h Automatic operation 1: 7,607 h Automatic operation 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanical interface pre-installed Various fixed tool holders Rinsing gun

Būklė: naudotas, Gamybos metai: 2005, Turning diameter: 275 mm Turning length: 900 mm Control system: TRAUB TX8i Spindle bore: 65 mm Drive power, 100% duty cycle: 25.20 kW Drive power, 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds, stepless: 1 - 5,000 rpm Spindle diameter in front bearing: 110 mm C-axis: 1 - 500 rpm Tool turret No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Cjdpsw E Nnbefx Ab Regw Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power, 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool turret No. 2 / No. 3 / No. 4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power, 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar feeder: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Max. hexagon: 45 mm Total power requirement: 95.00 kW Machine weight approx.: 16.00 t Installation dimensions approx.: 10.00 x 3.50 x H3.00 m Equipped with TRAUB TX 8i control, main and counter spindle with C-axis, 3 turret tool carriers, 1 vertical tool carrier with B-axis, extraction system, chip conveyor, coolant system with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package The machine can be inspected under power.

Gamybos metai: 1978, būklė: naudotas, Article: Program-controlled automatic lathe Brand: Traub Model: TF60 / 140 Year of manufacture: 1978 Bar automatic lathe Cgsdpfx Ajl Rmqteb Row Please contact us for further information and images via email(at) or

Būklė: geras (naudotas), Gamybos metai: 2001, TNK 36, 2001 m. įskaitant drožlių transporterį, Resy filtravimo įrangą Cgodpfoxv Sr Iox Ab Rew gera būklė, dirbo be pakrovėjo, neįjungta

Būklė: geras (naudotas), Gamybos metai: 1994, TRAUB TNS 65 D / 5 ašių CNC tekinimo-frezavimo centras Cgjdpfxjyc Nnzs Ab Rsw -Valdymas TX8 D -Išsamūs techniniai duomenys nuotraukose -Gamybos metai 1994 -Hydrobar strypų padavėjas -Įvairūs varomieji įrankių laikikliai - Įrankių laikikliai -Trijų žandikaulių griebtuvas -Pilna dokumentacija Galimi netikslumai ir klaidos

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Vieno veleno automatinis tekinimo staklės TRAUB A-15 yra puikios būklės, paruoštos naudojimui. Csdpfjyy Nz Rox Ab Rjgw Maksimalus tekinimo skersmuo: 15 mm