Traub Td 36 pirkti naudotą (95)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected load: 24 kW Main Spindle Max. bar capacity: 18 mm Max. spindle speed: 12,000 rpm Corner speed: 5,000 rpm Travel Z: 205 mm Rapid traverse: 40 m/min Measuring system resolution Z: 0.001 mm Feed force: 3,000 N Spindle nose / short taper: Traub short taper mount Max. clamping force: 1,400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm² Total cylinder stroke: 5 mm Clamping tube thread: M25 x 1 Counter Spindle Nlsdpewg Takefx Abmsh Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. spindle speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Upper Tool Turret with B-Axis Number of stations: 8 Tool shank cross-section, turning tools: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool-to-tool change time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of stations: 7 + counter spindle Tool shank cross-section, turning tools: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool-to-tool change time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tool System for Upper Turret Number of driven stations: max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Driven Tool System for Lower Turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Driven Tool System, Backworking Unit Number of stations: 7 Number of driveable stations: max. 3 Pitch distance: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF DELIVERY Includes (not an exhaustive list): - Traub CNC lathe - Tool holders, driven and non-driven - High-pressure and band filtration system - Oil mist separator - Fire suppression system - Chip conveyor - Bar feeder - Operating documentation Full scope of delivery according to photo series No guarantee for the accuracy, completeness or timeliness of the information provided.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 8 000 aps./min, strypo praėjimas: 32 mm, valdiklio modelis: Traub TX8i-S, įrankių magazino lizdų skaičius: 12, Įranga: drožlių transporteris, TECHNINĖS DETALĖS Strypo pralaidumas: 26 / 32 mm Maks. pagrindinio veleno apsukos: 8 000 aps./min Ašys: X1 / Y1 / Z1, C ašis integruota į pagrindinį veleną Revolveris: 1 Įrankių vietų: 12 Variklio galia: 6,7 kW (100 % darbo režimas) / 10,7 kW (40 % darbo režimas) Nsdpfxoxlfk Ne Abmjlh Sukimo momentas: 21 Nm (100 % darbo režimas) / 32 Nm (40 % darbo režimas) STAKLIŲ DUOMENYS Įjungimo laikas: 116 721 val. Darbo valandos: apie 48 000 val. Valdymas: Traub TX8i-S Matmenys ir svoris Išmatavimai (I × P × A): apie 4,4 × 1,4 × 1,7 m Staklių svoris: apie 4 000 - 4 200 kg ĮRANGA Drožlių transporteris: lankstinė grandinė, išmetimo aukštis apie 950 mm

Sąlyga: naudotas, Gamybos metai: 2013, veikimo valandos: 43 000 h, Funkcionalumas: visiškai funkcionalus, ašies variklio galia: 3 700 W, veleno greitis (maks.): 10 000 aps./min, bendras svoris: 5 000 kg, bendras plotis: 1 500 mm, bendras ilgis: 4 000 mm, bendras aukštis: 2 400 mm, Strypo skersmuo (maks.): 20 mm, greitas poslinkis X ašimi: 20 m/min, greitas poslinkis Y ašis: 20 m/min, greitasis eiga Z ašyje: 40 m/min, galia: 24 kW (32,63 AG), Z ašies eigos atstumas: 205 mm, Įranga: dokumentacija / vadovas, Siūlome vieną iš savo įrenginių pardavimui – planuojamo mūsų staklynų atnaujinimo metu ji bus išimta iš eksploatacijos. Tai 2013 metų gamybos TRAUB TNL 18P tekinimo staklės su judančiu velenu, kurios yra geros techninės būklės. Pardavimo priežastis – naujų technologijų įsigijimas kaip flotilės modernizavimo dalis. Dabartinis darbinių valandų skaičius – 43 000. Nljdpexdk Ukofx Abmoh

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, veikimo valandos: 3 500 h, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 10 000 aps./min, tekėjimo skersmuo: 20 mm, bendras svoris: 5 000 kg, padavimo ilgis Z ašis: 205 mm, greitasis eiga Z ašyje: 20 m/min, galia: 3 kW (4,08 AG), Įranga: dokumentacija / vadovas, drožlių transporteris, Aušinimo skystis: pjovimo alyva Strypų padavėjas: FMB Turbo 2-20 Šarnyrinis juostinis transporteris iš KABELSCHLEPP Nedpfx Aboxa Elvemolh Aukšto slėgio sistema 20-80 bar iš BÜRENER Gaisro gesinimo sistema iš KRAFT & BAUER Alyvos rūko atskirtuvas iš BÜCHEL

Gamybos metai: 2001, Sąlyga: geras (naudotas), Bar diameter min. 18mm / max. 63mm Bar length min. 1000mm / max. 4200mm Nodpei Dagcefx Abmslh

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1996, veikimo valandos: 15 001 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 462, valdiklio modelis: Traub TX8F, ašių skaičius: 7, Įranga: drožlių transporteris, strypų padavėjas, CNC lathe with 7 axes, bar feeder, & additional equipment! TECHNICAL DETAILS Bar length: 3000 mm Number of axes: 7 Control: Traub TX8F MACHINE DETAILS Spindle 1 operating hours: 50,318 h Spindle 2 operating hours: 32,922 h EQUIPMENT Main spindle Counter spindle 2 turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Nledpfew Uiqyex Abmsh Coolant system Chip conveyor

Sąlyga: geras (naudotas), Gamybos metai: 2002, TRAUB TNL 12/7 CNC Long Turning Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF DELIVERY Includes (not limited to): Traub TNL 12/7 CNC Turning Machine Meyrat High-Frequency Spindles, 2 units Tool holders (driven and non-driven) FMB Minimag 3200 C Bar Feeder Hydraulic unit High-pressure pump Nljdpfst E Dbysx Abmsh Chip conveyor Exact scope of delivery as shown in the photo series No liability is assumed for the correctness, completeness, or up-to-dateness of the information provided.

Sąlyga: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Dear Sir or Madam, We are offering you a Traub TNL 26 CNC Swiss-type automatic lathe, year of manufacture 2004. The machine is in a well-maintained, fully functional condition. Important Note: This model is equipped with only one turret. The TNL 26 was also produced in versions with two turrets – this listing explicitly refers to the configuration with a single turret. Technical Data (excerpt) Manufacturer: Traub Type: TNL 26 Year of manufacture: 2004 Control system: Traub TX8i-S Turret: 1 unit, mounted below, with 12 tool stations, driven (integrated headstock drive) Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Drive power: approx. 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Chip conveyor: hinged belt, discharge height approx. 950 mm Machine weight: approx. 4,000 – 4,200 kg Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Condition & Application The machine is ready for immediate use and is ideally suited for the precise production of small and medium batches in the automotive, medical, and precision engineering sectors. Price & Terms Price: on request / negotiable Delivery: ex location, ex works Inspection: possible at any time by prior appointment. For further information or to arrange a viewing appointment, I am of course always at your disposal. Nledpfxjxgg Rmo Abmjh Best regards Arnd Sauter GmbH Björn Sauter

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Spindle hours: 26,709 h SUB SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Spindle hours: 16,854 h - Number of turrets: 2 UPPER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 mm - Z stroke: 50 mm - Driven tool speed: 8,000 rpm LOWER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 mm * Y travel: -9.5 / +28 mm - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 16 kVA WEIGHT AND DIMENSIONS - Required space: 2,850 x 1,100 mm - Machine height: 1,480 mm - Machine weight: 2,000 kg EQUIPMENT/ACCESSORIES Nlodpfxjuhawhe Abmjh - Control system: Traub TX 8i - Powered guide bushing - Parts catcher - Parts conveyor - Chip conveyor: KNOLL 160 S-1 - Coolant tank: 500 l * with paper filter - Bar feeder: FMB Minimag 18 / 3200 C - Oil mist extractor: UAS SMOG HOG SH-05 - Number of fixed tool holders: 5

Sąlyga: naudotas, Gamybos metai: 1996, Maks. strypo skersmuo: 65 mm Maks. tekinimo skersmuo: 175 mm Maks. strypo ilgis: 3.000 mm Valdymas: Sistema TX 8F Eigos kelias - x: 140 mm Eigos kelias - z: 520 mm CNC tekinimo staklės | TRAUB - TNC 42/65 DG su strypų padavėju. Staklės yra gerai prižiūrėtos, jas galima apžiūrėti prijungtas prie elektros bet kuriuo metu. Staklių darbo vaizdo įrašus iš gamyklos vietos atsiųsime pagal pageidavimą. Nlodexbtq Njpfx Abmjh Techniniai staklių duomenys bus pateikti netrukus. Dėkojame už supratingumą!

Sąlyga: geras (naudotas), Gamybos metai: 2004, TRAUB TX8H CNC Control System Weight: 3,500 kg Dimensions (L x W x H): 3960 x 1640 x 1800 mm Power: 11 kW Spindle Speed: 5,600 / 4,000 rpm Torque: 200 / 280 Nm The TRAUB TNA 300 lathe is designed for machining workpieces with a turning length of up to 450 mm. --> For precision metal and plastics machining with defined cutting edge, using appropriate tooling. --> Suitable for mounting in jaw chucks sized from 160 to approx. 250 mm --> For processing bar stock up to Ø 42 or 65 mm --> EHS special version: workpiece discharge unit --> Chip conveyor extended by 800 mm --> Technical Data Working Area Spindle bore: 42 mm --> Spindle nose DIN 55026, size: A5 --> Chuck diameter: 160–175 mm / 200–250 mm --> Maximum turning diameter: 275 mm --> Travel over spindle center: 35 mm --> Maximum turning length: 450 mm --> Swing diameter over compound slide: 395 mm --> Swing diameter over bed: 520 mm --> Tool Turret Tool mounts for cylindrical shank per DIN 60880: 12 pcs --> Shank diameter: 30 mm --> Tool cross-section: 20x20 mm --> Indexing time (to station 1): 0.5 sec --> Indexing time (each additional station): 0.15 sec --> Feed drives X-axis: --> Travel: 210 mm --> Feed force: 5,000 N --> Rapid traverse/Path speed: 15 m/min --> Z-axis: --> Travel: 450 mm --> Feed force: 6,000 N --> Rapid traverse/Path speed: 18 m/min --> Y-axis: --> Travel: ±35 mm --> Feed force: 6,000 N --> Rapid traverse/Path speed: 10 m/min --> C-axis: Nsdewwl Iuepfx Abmolh --> Speed: 100 rpm --> Torque: 140 / 196 Nm --> Electric resolution: 0.001 degrees --> Tailstock Quill diameter: 70 mm --> Quill stroke: 60 mm --> Rapid withdrawal stroke: 280 mm --> Quill pressure at 55 bar: 8,600 N --> Socket per DIN 228: Mk 4 --> Steady Rest Clamping range: 8–95 mm --> Workpiece removal device Max. part length: 250 mm --> Max. part weight: 3 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1996, veikimo valandos: 38 433 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 489, Strypo skersmuo (maks.): 65 mm, valdiklio modelis: TRAUB TX8F, juostos ilgis: 3 000 mm, ašių skaičius: 7, Įranga: drožlių transporteris, strypų padavėjas, CNC tekinimo automatas su septyniomis ašimis bei pagrindiniu ir priešpriešiniu špindeliais! TECHNINĖS DETALĖS Nledow Uiktjpfx Abmsh Ašys ir špindeliai Ašių skaičius: 7 Pagrindinis špindelis: yra Priešpriešinis špindelis: yra Revolverių skaičius: 2 C ašys: 2 Y ašis: 1 Valdymas: TRAUB TX8F STAKLIŲ DETALĖS Darbo valandos: 38 433 val. ĮRANGA Stamag DN61 strypų padavėjas (strypo skersmuo 65 mm, strypo ilgis 3 m) Aušinimo sistema Detalių išvedimas Drožlių transporteris Oro filtras

Sąlyga: geras (naudotas), Gamybos metai: 1993, - TRAUB TX 8F control system - Spindle bore: 42 mm - Main spindle speed: 40 - 4,000 rpm - 4 cutoff slides: stroke 60 mm Njdpfx Abjldd Iqomolh - 8-position turret - High-pressure pump: 25 bar - Rear-side machining (2 spindles) - Bar feeder (3 m) - Chip conveyor

Sąlyga: geras (naudotas), Gamybos metai: 2000, Traub TNL12/7 CNC Automatic Lathe Spindle bore: 12.7 mm Turning length: 130 mm Main spindle: 4 kW; C-axis, 0.001° increment; 12,000 rpm Nodpfopuilvsx Abmslh Turret 1 – X1 and Y1 axes, 6 tool stations, driven tools 1.5 kW Turret 2 – X1 and Z2 axes, 6 tool stations, driven tools 1.5 kW Sub-spindle: 2.5 kW; C-axis, 0.001° increment; 12,000 rpm Front attachment – Z3; Z4/X3 axes, driven tools Rear attachment – X4 axis, driven tools 1.5 kW Bar feeder: FMB Minimag The machine comes with a wide range of accessories and tool holders. The machine is connected to power and in continuous production. 1. TNL12/7 s/n: 248 y/m: 2000, 7 linear axes (X1, Z1, Y1, X2, Z2, X3, Z3 + 2×C-axis) + FMB Minimag + Knoll chip conveyor

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, veikimo valandos: 47 600 h, mašinos/transporto priemonės numeris: 325, System: TX8H Spindle bore: 80 mm Maximum turning length: 750 mm Turning diameter: 340 mm Power: 22 kW Number of tool holders: 12 Shank diameter: 40 mm Driven tools at all positions X-axis Nljdpfsh Dzqlex Abmsh Z-axis C-axis Automatic tailstock Chip conveyor

Sąlyga: naudotas, Gamybos metai: 1996, Veleno pralaida: 80 mm Didžiausias tekinimo skersmuo: 395 mm Didžiausias tekinimo ilgis: 750 mm Njdpfxsxbtqvs Abmelh Valdymas: System TX 8H Didžiausias veleno apsisukimų skaičius: 3.150 aps./min. CNC tekinimo staklės | TRAUB - TNA 400 Staklės yra gerai prižiūrėtos ir bet kada gali būti apžiūrėtos įjungtos. Techniniai duomenys bus pateikti netrukus. Dėkojame už supratimą!

Sąlyga: naudotas, Gamybos metai: 1987, Control system: Traub System TX 8D Maximum turning diameter over longitudinal slide: 660 mm Maximum turning diameter over cross slide: 445 mm Nedpfxsv Ig D Tj Abmjlh Turning length: 1000 mm Spindle bore: 80 mm Spindle speed: 2,000 rpm Number of tool stations: 14 positions Chuck diameter: 250/315 mm Operating hours: approx. 39,794 h In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Modifications and errors in the technical data and information, as well as prior sale, are subject to change!

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 364, valdiklio modelis: Traub TX8F, ašių skaičius: 7, Įranga: drožlių transporteris, strypų padavėjas, CNC lathe with 7 axes, bar feeder, & additional equipment! TECHNICAL DETAILS Bar length: 3000 mm Number of axes: 7 Control: Traub TX8F MACHINE DETAILS Nedpfx Absw Ec Alemslh Spindle 1 operating hours: 50,318 h Spindle 2 operating hours: 32,922 h EQUIPMENT Main spindle Counter spindle 2 turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Coolant system Chip conveyor

Sąlyga: geras (naudotas), Gamybos metai: 1991, Max. bar diameter: 42 mm Nodjvy Uy Hspfx Abmslh Chuck diameter: 40 mm Diameter over cross slide: 160 mm Spindle speed range: 10-5000 rpm Turret with 12 stations (non-driven) Chip conveyor Bar feeder FMB turbo 3000 Max. bar length: 3 m

Sąlyga: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Traub CNC tekinimo staklės TNA300Y, TX8H, 2000 m. Y ašis, C ašis, sukinėjamos įrankių pavaros, VDI30, kiaurymės spaustuvo cilindras 65 mm, 185 E griebtuvėlis su įvorėmis 1 VDI30 revolveris, atraminis taškas, drožlių transporteris, LNS Hydrobar ~38 000 darbo valandų Fsdb Umgew Svfrexiogg Labai prižiūrėta, gera būklė. Prijungta prie elektros, apžiūra galima iki 2025-08-29 Nledpjxby N Sofx Abmeh

Sąlyga: geras (naudotas), Gamybos metai: 2005, veikimo valandos: 32 870 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6030578, tekėjimo skersmuo: 32 mm, veleno greitis (maks.): 8 000 aps./min, Strypo skersmuo (maks.): 32 mm, We offer for sale a Traub TNL26K automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Sub spindle: 6.7/10.7 kW; 8000 rpm Nlsdovldx Aepfx Abmsh Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Barfeeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine includes a large number of fixed and driven toolholders – see the attached photo for the list.

Sąlyga: naudotas, Gamybos metai: 1997, Veleno praėjimas: 80 mm Maks. tekinimo skersmuo: 460 mm Maks. tekinimo ilgis: 1 000 mm Valdymas: TX 8F sistema Maks. veleno apsisukimų skaičius: 2 800 aps./min. CNC tekinimo staklės | TRAUB - TNA 500 Nlsdexbtpxepfx Abmsh Staklės yra tvarkingos būklės ir bet kada gali būti apžiūrėtos prijungtos prie elektros. Techniniai duomenys netrukus bus pateikti. Dėkojame už supratimą! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500

Sąlyga: naudotas, Gamybos metai: 2005, Swing diameter 275 mm Turning length 900 mm Control TRAUB TX8i Spindle bore 65 mm Drive power 100% duty cycle 25.20 kW Drive power 40% duty cycle 30.20 kW Torque at 40% / 100% duty cycle 180 / 135 Nm Spindle speeds - stepless 1 - 5,000 rpm Spindle diameter at front bearing 110 mm C-axis 1 - 500 rpm Tool turret No. 1 X-axis 290 mm Y-axis 165 mm Z-axis 600/950 mm B-axis 360° Rapid traverse X/Y/Z 18 / 18 / 30 m/min Feed force X/Y/Z 10 / 10 / 7 kN Number of tools 2x2 + 2x2 Number of driven tools 2x2 + 2x2 mm Tool speeds 8,000 / 2,000 rpm Drive power 25% duty cycle 5.80 kW Torque at 25% duty cycle 4x18.6 / 4x74 Nm Tool holder TRAUB Ø60 Tool turrets No.2 / No.3 / No.4 X-axis 170 mm Z-axis 600/950 mm Y-axis +/- 60 mm Rapid traverse X/Y/Z 18 / 15 / 30 m/min Feed force X/Y/Z 10 / 10 / 7 kN Tool turret - number of stations 10 Number of driven tools 10 mm Tool speeds 1 - 6,000 rpm Drive power 25% duty cycle 5.80 kW Torque at 25% duty cycle 18.60 Nm Tool holder DIN 69880 Ø40x63 Bar feeder DNH61 / 3000 Bar lengths 1,000 - 3,200 mm Bar diameters 18 - 63 mm Nodpew E Nnbsfx Abmslh Hexagon max. 45 mm Total connected load 95.00 kW Machine weight approx. 16.00 t Required space approx. 10.00 x 3.50 x H3.00 m With TRAUB TX8i control, main and counter spindle with C-axis, 3 pcs turret tool holders, 1 pc vertical tool holder with B-axis, extraction unit, chip conveyor, coolant system with coalescence separator. Bar feeder TRAUB Stamag DNH61 / 3000 2 pcs 3-jaw chucks SMW KNCS-N 170-43 2 pcs HAINBUCH Spanntop collet chucks 40 pcs various static tool holders 6 pcs various driven tool holders Spare parts package

Gamybos metai: 1983, Sąlyga: paruoštas naudoti (naudotas), Swing diameter: 320 mm, turning length: 1000 mm, spindle bore: 80 mm, spindle speed: 3150 rpm, travel path X/Z: 265 mm / 1000 mm. Machine dimensions X/Y/Z: approx. 5500 mm / 2400 mm / 2400 mm, weight: approx. 7000 kg, control: Traub System TX-8. Includes a tool set, three-jaw chuck, and bar feeder with collets. Documentation available. An on-site inspection is possible. Nljdpfewzld Dsx Abmeh

Gamybos metai: 1993, Sąlyga: paruoštas naudoti (naudotas), A universal CNC lathe Traub is available. Swing diameter over bed/cross slide: 400mm/360mm, turning diameter max./normal: 360mm/320mm, max. turning length: 1000mm, distance between centers: 2000mm, chuck diameter: 315mm. Spindle bearing diameter: 160mm, spindle bore: 80mm, spindle speed: 4000rpm, power: 26kW, tool stations: 14. Travel X/Z: 180mm/1000mm, feed rate: 24mm/rev, rapid traverse X/Z: 1000mm/1500mm/min. Tailstock quill diameter: 100mm, quill stroke: 200mm. Machine dimensions X/Y/Z: approx. 5800mm/2400mm/2400mm, weight: approx. 7200kg, control: Traub System TX-8-D. Documentation available. On-site inspection possible. Nljdpjwrrq Esfx Abmeh