Tnc pirkti naudotą (696)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, X-travel: 2500 mm Y-travel: 3500 mm Z-travel: 1500 mm Godpfx Afevwgtyodsbn Control system: HEIDENHAIN TNC 640 C-axis: ±360° Milling head: swivelable ° Milling head rotatable by ±360° Table dimensions – lengthwise: 2500 mm Table dimensions – crosswise: 3500 mm Table load: 6 t/m² Coolant system: internal coolant supply (ICS), 70 bar Feed rate: 60 m/min Spindle speeds: 24,000 rpm Tool holder: HSK-A63 Milling spindle motor S6 (40%/2 min): 41 kW Spindle torque S6 (40%/2 min): 49 Nm Milling spindle motor S1 (100%/2 min): 34 kW Spindle torque S1 (100%/2 min): 39 kW Tool changer: 60 positions Machine weight: approx. 74 t Required space: approx. 4 x 7.5 x 5.4 m This thermo-symmetrical, ergonomic, universal ZIMMERMANN FZU32 portal milling machine is in mint condition and available immediately. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining aluminium, fibre-reinforced composites, plastics, Ureol, and steel. The especially rigid, newly developed centrally guided portal enables us to meet the increasing demands in model, tool, and mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions.

Būklė: naudotas, Gamybos metai: 2017, veikimo valandos: 60 300 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 100 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 510 mm, padavimo ilgis X ašis: 1 100 mm, padavimo eiga Y ašimi: 560 mm, padavimo ilgis Z ašis: 510 mm, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: TNC 620, stalo plotis: 560 mm, stalo ilgis: 1 400 mm, sukimosi greitis (min.): 20 aps./min, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 5 830 kg, veleno greitis (min.): 20 aps./min, veleno greitis (maks.): 12 000 aps./min, veleno veikimo valandos: 32 000 h, ašies skaičius: 1, įrankių magazino lizdų skaičius: 30, Įranga: dokumentacija / vadovas, drožlių transporteris, For sale: Used vertical machining center DMG MORI CMX 1100 V, year of manufacture 2017. The machine is located at our facility in Bydgoszcz, Poland. The scheduled production run on this machine has just been completed, and the machine is now ready for sale. The machine remains connected to power, allowing for startup, inspection, and on-site viewing by prior arrangement. The main spindle was replaced by DMG service in November 2024. Since the replacement, the spindle has operated approximately 3,700 hours. A DMG service report confirming the spindle replacement is available. Basic data: Manufacturer: DMG MORI Model: CMX 1100 V Year of manufacture: 2017 Control: HEIDENHAIN TNC 620 3D Travel X/Y/Z: 1100 / 560 / 510 mm Table dimensions: 1400 × 560 mm Spindle speed: 20–12,000 rpm Spindle taper: SK40 DIN 69871 Tool magazine: 30 stations Linear scales on X/Y/Z axes Wireless HEIDENHAIN touch probe Chip conveyor Electronic handwheel Coolant tank: 250 l Machine weight: approx. 5,830 kg Operating hours: Approx. 3,700 h since spindle replacement Gbsdpfx Afsy I A Dusden Spindle hours according to counter: approx. 33,000 h Machine on-time: approx. 61,800 h Current hour meter readings are available in documentation dated 12 May 2026.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, veikimo valandos: 4 726 h, veleno greitis (maks.): 15 000 aps./min, X ašies eiga: 900 mm, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: TNC 640, ašies variklio galia: 51 000 W, stalo apkrova: 500 kg, įrankių magazino lizdų skaičius: 90, ašių skaičius: 5, Šis 5 ašių "Quaser UX630" buvo pagamintas 2020 m. Jame sumontuotas galingas "HSTec HM-15A" suklys, kurio greitis 15 000 aps/min, ir tvirtas sukamasis / pasukamasis stalas, galintis apdoroti iki Ø630 × 540 mm dydžio ruošinius. Staklėse įrengtas 90 padėčių įrankių žurnalas, jose yra pažangių galimybių, pavyzdžiui, "Renishaw" 3D ruošinio zondas. Jei ieškote aukštos kokybės apdirbimo galimybių, apsvarstykite mūsų parduodamą universalųjį apdirbimo centrą "Quaser UX630". Susisiekite su mumis dėl išsamesnės informacijos. • 5 ašių vienalaikis apdirbimas; B ašis ±120°, C ašis 360° nepertraukiamai • Suklys: HSTec HM-15A, HSK-A63, 162 Nm • Pasukamas / pakreipiamas stalas: Didžiausia apkrova 500 kg; didžiausia apdirbama detalė Ø630 × 540 mm; maksimali apkrova 630 × 540 mm. • Valdymas: "Heidenhain TNC 640" su parinktimis DCM, "Kinematics Opt", LAC, DNC (Opt. 18) • Įrankių laikiklis: 90 pozicijų (HSK-A63) • Aušinimo skystis per visą špindelį: 20 barų • Heidenhain linijinės skalės visose ašyse • Suklio darbo valandos: 4,726 • Pastaba: paveikslėliuose pavaizduotas dulkių siurblys neįtrauktas Papildoma įranga • "Renishaw" 3D ruošinio zondas • "Blum" lazerinis įrankių matavimas Godpfxoza E U Se Afdobn • "Schunk Vero-S" nulinio taško prispaudimo sistema • NP prispaudimo sistema • Įdiegta ir suprogramuota BMO roboto sąsaja (robotas neįtrauktas į komplektą) • Pridedami HSK63 įrankiai

Būklė: geras (naudotas), Gamybos metai: 2002, X ašies eiga: 1 800 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 1 100 mm, greitas poslinkis X ašimi: 60 m/min, greitas poslinkis Y ašis: 40 m/min, greitasis eiga Z ašyje: 40 m/min, sukamosios stalo skersmuo: 1 700 mm, sukimosi greitis (maks.): 10 000 aps./min, aušinimo skysčio tiekimas: 40 juosta, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Universalus apdirbimo centras Staklių tipas: DMG DMU 200 P Valdymas: Heidenhain TNC 430 M Metų gamyba: 2002 m. TECHNINIAI DUOMENYS: Eigos: X ašis: 1 800 mm Y ašis: 2 000 mm Gbjdpfoxuqn Sjx Afdjn Z ašis: 1 100 mm B ašis: 0,001° C ašis: 0,001° Valdomų ašių skaičius: 5 Sukimosi greitis: 10 000 aps./min. Variklio galia: 44 kW Įrankio laikiklis: SK 50 Įrankių keitiklis Įrankių vietos: 60 NC sukamasis stalas Stalo dydis: 1 700 x 1 400 mm Maksimali stalo apkrova: 5 000 kg Įranga: Drožlių transporteris Vidinis aušinimas (IKZ): 40 barų Popierinis juostinis filtras Matavimo jutiklis Elektroninis rankinis valdymo ratukas

Būklė: naudotas, Gamybos metai: 2018, Are you looking for a gantry milling machine? With X-axis travel ranging from 2 to 15 meters, Y-axis travel up to 4 meters, and Z-axis travel up to 2 meters, we offer you a versatile selection of machines to meet various machining requirements. Whether you need CNC universal heads, W-axis, rotary tables, tool changers, or controls from renowned manufacturers such as Siemens, Fanuc, and Heidenhain, our comprehensive range of accessories gives you maximum flexibility and efficiency. Take a look at the PDF catalogue below! Discover the ultimate precision and robustness of our refurbished CORREA gantry mills, carefully overhauled by our experts in Spain. These machines have been inspected to the highest standards and guarantee you top-quality machining performance. A prime example is our in-stock used CNC gantry milling machine VM 2018, equipped with the proven Heidenhain control system. With impressive performance data and detailed technical features, this machine offers everything you need for precise and efficient machining. x-axis travel: 2,300 mm y-axis travel: 2,000 mm z-axis travel: 1,000 mm table size: 2,300 x 1,600 mm T-slots (width x spacing x number): 8 x 22 x 180 mm max. table load: 8 t distance between columns: 1,840 mm distance spindle nose to table: 180 ~ 1,180 mm spindle motor: 22/46 kW torque at the spindle: 140.1/286.5 Nm (S6-25%) spindle taper: SK 50 spindle speed: 10,000 rpm (direct drive) rapid traverse X, Y: 20,000 mm/min rapid traverse Z-axis: 15,000 mm/min milling feed range: 1~10,000 mm/min machine size (L x W x H): 7,027 x 5,217 x 4,339 mm total power requirement: 60 kVA machine weight approx.: 25 t CNC control: Heidenhain TNC 620 chip conveyor with chip bins: 2 spiral type, 1 hinged belt type internal coolant supply (IKZ): 20 bar CE compliant: certified by TÜV Gbsdpfx Aehx R Dkefdsn Used CNC gantry milling machine with HEIDENHAIN 620 TNC control, extensive accessories, and the following features: - Monoblock cast iron machine bed and monoblock cross beam provide maximum rigidity for precise machining results. - The entire structure has been FEM analyzed to optimize both rigidity and precision. - P-class linear guideways with feed rollers allow for maximum loading with a low friction coefficient (0.003-0.006), ensuring smooth operation through optimized roller recirculation and guidance, which also reduces energy consumption. - Double-nut C3 ball screws ensure precise milling even under heavy loads. - Direct-drive spindle with 10,000 rpm, SK50 tool holder. - Spindle motor power 22/46 kW (S6-25%), delivering 22 kW continuous power and up to 46 kW for a 30-minute overload period. - Spindle torque of 140.1/286.5 Nm (S6-25%). - Two spiral conveyor and one hinged belt chip conveyor for effective chip removal. All major components are sourced from renowned European manufacturers, ensuring a reliable, rapid, and long-term supply of spare parts. Don’t miss the opportunity to optimize your production processes and invest in high-quality milling technology. Experience the difference our gantry milling machines make—reliable, durable, and ready to take on your most demanding tasks. Contact us today and let our experts advise you. Further stock machines available on request.

Gamybos metai: 2018, būklė: naudotas, x-travel: 1600 mm y-travel: 1300 mm z-travel: 700 mm Distance between columns: 1500 mm Distance spindle center to table: 225-925 mm Table size: 1800 x 1300 mm Table load: 4000 kg T-slots (Width x Pitch x Quantity): 22 x 160 x 8 mm Spindle taper: HSK-A 63 Spindle speed: 24,000 rpm Spindle motor: 25/33 kW Spindle motor torque: 72.6/95.8 N.m. Rapid traverse in X-Y-Z axes: 30,000 mm/min Feed rates X/Y/Z axis: 1~20,000 mm/min Tool changer: 20 positions Max. tool diameter: 100/130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Total power requirement: 80 kVA Machine weight approximately: 22 t Machine dimensions (LxWxH): 5660 x 5295 x 3930 mm CNC control: Heidenhain TNC 620 Spindle: IBAG electric spindle 24,000 rpm HSK-A 63 Glass scales: Heidenhain Tool changer: 20 positions Chip conveyor - spiral: 2 units Used CNC high-speed gantry milling machine with extensive accessories at a special introductory price. Key component manufacturers for this stock machine include: · Controller and servomotors: Heidenhain, Type TNC 620 · Ball screw bearings: Japan NSK · X-axis ball screw: Taiwan Hiwin · Y-axis ball screw: Taiwan Hiwin · Z-axis ball screw: Taiwan Hiwin · 3-axis linear guideways: Japan THK or Germany Rexroth · Electric spindle unit: HSK A63-24,000 rpm by IBAG · Linear encoders: Heidenhain · Pneumatic system: Japan SMC · Lubrication: Japan Showa · Covers: Hema · Air conditioning: Taiwan Kaokung · Spindle water cooler: Taiwan-Punkt · 3-axis cable drag chain: Germany Igus · Coupling: Germany KTR · Machine enclosure: Germany Mecano · Relays: Omron · Electrical systems: Germany Schneider · MPG handwheel: Japan Tosoku For more information about the machine, standard accessories, and special accessories, please refer to the attached documentation. Of course, we are also happy to organize delivery to your location including assembly/commissioning, handover ready for operation, as well as operator training. Gjdpfx Afohx R Dvjdsbn

Būklė: naudotas, Gamybos metai: 2018, X ašies eiga: 2 300 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 1 000 mm, stalo ilgis: 2 300 mm, stalo plotis: 1 600 mm, veleno greitis (maks.): 10 000 aps./min, veleno nosis: SK 50, Used CNC Gantry Milling Machine KRAFT VM-2018B with Heidenhain TNC 620 Year of manufacture: 2018 Location: Germany Delivery time: short notice Payment: 100% before loading Warranty: none Machine Description The KRAFT VM-2018B is a precise and high-performance CNC gantry milling machine equipped with HEIDENHAIN TNC 620 control, ideal for heavy-duty and high-precision machining tasks. Thanks to its robust construction and high-quality components, it is perfectly suited for demanding milling applications in tool and mold making as well as for series production. Highlights & Features Godpjwkg T Sjfx Afdebn - Monoblock cast iron bed and crossbeam for maximum rigidity and precision - FEM-optimized machine design - BF gearbox with 26 kW motor for high torque (662 Nm) - P-class linear feed guides (very low friction coefficient 0.003–0.006) - C3 ball screws with double nut – high load capacity & accuracy - Spindle: SK50, 10,000 rpm, directly driven - Heidenhain TNC 620 control - Spindle cooling & ICS 20 bar - Coolant system, oil separator, air conditioning for control cabinet - Full enclosure, TÜV-certified, CE-compliant Technical Data - Travels (X/Y/Z): 2,300 / 2,000 / 1,000 mm - Table size: 2,300 × 1,600 mm - T-slots: 8 × 22 × 180 mm - Max. table load: 8 t - Distance spindle nose – table: 180–1,180 mm - Rapid traverse X/Y: 20,000 mm/min - Rapid traverse Z: 15,000 mm/min - Feed rate range: 1–10,000 mm/min - Positioning accuracy (VDI/DGQ3441): 0.020 mm - Repeatability (VDI/DGQ3441): 0.015 mm - Machine dimensions (L×W×H): 7,027 × 5,217 × 4,339 mm - Machine weight: approx. 25 t - Total connected load: 60 kVA Additional Equipment & Accessories - 2 spiral chip conveyors, 1 chain chip conveyor - Chip bin, work light, 3-color signal light - Portable handwheel, cooling system, tool box - Automatic lubrication, pneumatic unit - Water/air gun, transformer - Foundation wedges, anchor bolts, door lock - Technical documentation in German - Rigid tapping, spindle air cleaning - Option: various manual and CNC milling heads Performance Meets Efficiency This gantry milling machine not only offers power and precision, but also impresses with a sophisticated design featuring energy-efficient technology, reliable branded components (including NSK, Fanuc) and comprehensive serviceability. Financing available: Upon request, we offer attractive leasing and hire-purchase models. Optional: Delivery to site, installation, commissioning and training – just ask us!

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Discover our selection of robust and precise bed-type milling machines! Are you looking for a reliable bed milling machine to boost your productivity? Experience unmatched precision and performance with our new and overhauled bed-type milling machines. Our machines offer X-axis travels from 1,500 to 5,000 mm and are available with Heidenhain or Siemens controls. With Y and Z travels up to 1,200 mm, you have limitless possibilities. Some overhauled machines are in stock and available at short notice! Explore our extensive range of special accessories, such as universal milling heads, tool changers, and much more to further enhance the versatility of your bed milling machine. Whether for complex workpieces or demanding tasks, our machines consistently deliver the best results. Rely on our many years of experience and let’s optimize your machining processes together. Invest in quality and precision—contact us today! Below you will find a selection of possible machine types; we are also happy to offer additional models or special machines upon request: MAIN TECHNICAL DATA: BFM series including BAFA grants starting from 15% or more! - X-axis travel 1,500–5,000 mm - Y-axis travel 1,000 mm - Z-axis travel 950 mm (up to 1,500 mm optional) - Max. table load 5,000 kg - Spindle taper SK 50 Gbsdpepwn Hhsfx Afdon - Spindle speed 3,500 rpm (5,000 rpm optional) - Spindle drive 15/18.5 kW (22/26 kW optional) ACCESSORIES: Manual universal head, Siemens or Heidenhain control, linear scales on X-Y-Z axes, chip conveyor (screw type front/rear) and much more. Comprehensive special accessories available on request to further enhance productivity: CURRENTLY AVAILABLE OVERHAULED MACHINES with warranty and BAFA funding, e.g. - CORREA CF17D: HEIDENHAIN TNC-426, travels (X/Y/Z): 2,000 / 800 / 800 mm, manual milling head, and more. - CORREA CF25/25: HEIDENHAIN TNC-530, travels (X/Y/Z): 2,500 / 1,000 / 1,500 mm, automatic universal head UAD (0.1º increments), 6,000 rpm, and more. - CORREA CF25/25: HEIDENHAIN TNC-426, travels (X/Y/Z): 2,500 / 1,000 / 1,000 mm, automatic indexing differential head UAD (0.1º increments), 6,000 rpm, automatic tool changer (30 tools), and more. - CORREA PRISMA: HEIDENHAIN TNC-530, travels (X/Y/Z): 2,500 / 1,000 / 1,000 mm, automatic indexing milling head UDG40 (2.5º increments), and more. - CORREA CF22/25: HEIDENHAIN TNC-426, travels (X/Y/Z): 2,500 / 800 / 800 mm, manual milling head, and more. - NICOLAS CORREA A30/30: HEIDENHAIN TNC-426, travels (X/Y/Z): 3,000 / 1,200 / 1,000 mm, extended manual milling head (UL40), and more. - CORREA A30/30: HEIDENHAIN TNC-426, travels (X/Y/Z): 3,000 / 1,200 / 1,000 mm, universal milling head with automatic indexing UDG (2.5º increments), automatic tool changer (ATC30), and more. Further models available from stock or at short notice. Contact us now and discover the world of innovative bed milling technology! Our service for you: • On-site consultation and solution finding • Organization of machine transport to your facility • Placement, installation, commissioning, and hand-over ready for operation • Financing and assessment of grant opportunities with KFW, BAFA, and more.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, AXILE G8 – High-Performance 5-Axis Machining Centre for Maximum Precision The AXILE G8 represents the top tier of modern 5-axis machining centres and is specifically engineered for demanding precision applications. Its integrated gantry design, high dynamic rigidity, and advanced automation capabilities make it ideal for tool and mould making, aerospace, medical technology, as well as complex prototyping and small batch production. Technical Highlights • 5-axis gantry construction for maximum stability and minimal vibration • High-dynamic linear drives / precision ball screws (depending on configuration) • Robust spindle (18,000–20,000 rpm, HSK-A63) with high power density • Swivelling/rotary table with direct drive, perfect for simultaneous 5-axis machining • Large working area for complex workpieces • Tool magazine with 40–120 pockets, depending on specification • Available with Siemens or Heidenhain control (according to version), ergonomic and user-friendly • Stable portal construction for optimal thermal stability and long-term precision Typical Technical Data (model dependent) • X-axis: approx. 670 mm • Y-axis: approx. 820 mm • Z-axis: approx. 600 mm • Table diameter: approx. 600 mm • Table load capacity: up to 500 kg • Spindle speed: 18,000 – 20,000 rpm • Tool holder: HSK-A63 • Magazine size: 40 / 60 / 120 tools • Control: Heidenhain TNC 640 or Siemens 840D sl (Values may vary depending on year and configuration.) Features & Options • Full simultaneous 5-axis machining • Through-spindle coolant (IKZ) • Automatic tool measurement and breakage detection • Renishaw touch probe • High-pressure coolant system • Chip conveyor and internal washdown • Modern safety enclosure & automation interfaces Applications The AXILE G8 is ideal for: • Tool & mould making • Aerospace • Medical technology • Automotive prototyping • Mechanical engineering & precision parts manufacturing Description This 5-axis machining centre impresses with its combination of dynamism, stability, and ultra-precise machining. Thanks to the gantry structure, the machine remains extremely stable even during extended operation and high feed rates. Intelligent thermal management ensures consistent accuracy, while the modern control system allows efficient programming and rapid setup times. The AXILE G8 is the ideal solution for companies seeking a reliable, high-performance, and future-proof 5-axis machine. Currently, machines with Siemens and Heidenhain controls are in stock, including versions with 600 mm table size. Gjdpfxexxh A Ie Afdsbn

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, CNC valdomas vertikalus apdirbimo centras AXA VSC-3-3000-M Metai: 1995 Valdymas: Heidenhain TNC 407 Techniniai duomenys: X eiga: 3000 mm Y eiga: 420 mm Z eiga: 480 mm Stalo dydis: apie 3000 x 500 mm Veleno tvirtinimas: SK40 Sūkių diapazonas: iki 6000 aps./min 22 vietų įrankių keitiklis Aušinimo skysčio sistema Tvirta važiuojančio portalo konstrukcija Gjdpfxoy U Hy Te Afdobn Ypatinga įranga: Papildoma kampinė/universali frezavimo galvutė Galima 4-/5-ašių apdirbimas Lankstus sudėtingų detalių apdirbimas Idealiai tinka įrankių gamybai, mašinų gamybai ir pavienių detalių gamybai Staklės yra geros būklės. Apžiūrėti darbo režimu galima pagal susitarimą.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, 5-axis Universal Machining Center Quaser PRO.FLEX 6, year of manufacture 2016, Heidenhain TNC 640 control, HSK-A63 spindle taper, 60-tool magazine, 15,000 rpm spindle, Blum TC60 probe. The machine is powered and can be demonstrated under power. Machine Description For sale: 5-axis universal machining center Quaser PRO.FLEX 6. The machine is suitable for precise and complex 5-axis machining. It is equipped with Heidenhain TNC 640 control, HSK-A63 spindle taper, 60-tool magazine, and 3D Blum TC60 probe. The machine is currently powered and can be demonstrated in operation upon agreement. Technical Data Manufacturer: Quaser Model: PRO.FLEX 6 Year of manufacture: 2016 Control system: Heidenhain TNC 640 Spindle taper: HSK-A63 Max. spindle speed: 15,000 rpm Tool magazine positions: 60 Probe: Blum TC60 Number of axes: 5 Connection: 400 V / 50 Hz Power consumption: 71 kVA Machine weight: approx. 15,000 kg Machine dimensions: approx. 511 × 456 × 316 cm Serial number: 352A160001 Operating Hours System on: 24,959 h Machine on: 21,005 h Program run: 7,634 h Hydraulics: 20,995 h Axes: 5,936 h Spindle S1: 6,423 h Spindle S2: 0 h Accessories / Tool Holders Included Gbsdpfx Aey Udrtsfden The offer includes a 3D Blum TC60 probe and a calibration mandrel used during machine start-up for spindle pre-lubrication. Collet tool holders installed with the machine may be included: Collet holders ER16: short: 1 pcs medium: 14 pcs long: 3 pcs Collet holders ER32: short: 2 pcs medium: 2 pcs long: 2 pcs Arbor parts for indexable insert cutters: 3 pcs For the indexable insert cutters, individual arbor parts may be included. The cutter bodies themselves will remain in use on the machine for toolroom operation. Condition The machine is used, in operating condition. It is powered and can be demonstrated. Viewing by prior arrangement.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, We offer you: Universal CNC Machining Centre Manufacturer: DMG MORI Model: DMC 80 FD duoBlock Year of manufacture: NEW Control: Celos with Heidenhain TNC 640 Technical Data: Travel axes: x-axis: 800 mm y-axis: 1050 mm z-axis: 850 mm Main spindle: Tool holder: HSK-A 100 Speed range: 12,000 rpm Drive power (100/40%): 52 / 42 kW Max. torque: 430 / 300 Nm Rotary table: Table diameter: 800 x 630 mm Max. table speed: 30 rpm (milling) / 800 rpm (turning) Tool changer: Number of tool stations: 123 pos. Technical Features & Accessories: - Universal milling head with controlled B-axis - NC milling/turning table with pallet carrier - Rotary pallet changer, 2 pallets - Coolant tank 980 l - Oil and emulsion mist extraction system - Chip conveyor - Rotatable viewing window - Taper cleaning station with rotating brushes for HSK tool holders - Operating panel for the tool magazine of the loading station with 15-inch TFT display - Through-spindle high-pressure coolant system, frequency-controlled 10 bar – 80 bar / 31 l/min (AD) - Rinsing gun for chip flushing - Cooling device with air blast through spindle center - Optical infrared probe Renishaw PP60 (OMP 60) - Tool measurement in working area Blum Laser DIGILOG Gbsdpfxoy U Hlpo Afdsn - Tool breakage monitoring, mechanical version - 3D quickSET - Sensor package i4.0, consisting of: MPC – Machine Protection Control, SGS spindle growth sensor, through-spindle high-pressure coolant flow monitor - Condition Analyzer - proTIME - 4-color signal tower - Operating mode 4 - Accuracy package - Electronic handwheel - Energy meter for CELOS - Safety package for power failure - L-probe package 2 (Renishaw) / L-measurement Accessories, depicted tools and clamping devices are only included in delivery if specified in the additional information. Modifications and errors in the technical data and specifications, as well as prior sale, reserved!

Būklė: naudotas, Gamybos metai: 1999, Technical details: X travel: 1250 mm Y travel: 880 mm Gbodpstq Nlcsfx Afden Z travel: 800 mm Control: Heidenhain TNC 430 Tool changer: 60 positions Tool holder: SK 50 Spindle speed: 8000 rpm Pallet size: 1000 x 800 mm Total power requirement: 56 kVA Machine weight approx.: 14.3 t Space requirement approx.: 5.5 x 3 x 3.1 m 5-axis machine with CNC-controlled universal milling head as B-axis 2-pallet changer incl. 2 pallets 1000 x 800 mm Production package, consisting of: - High-pressure coolant system (IKZ) with 40 bar operating pressure, 900 l coolant tank (2.25 x 1.3 x 2.2 m / 950 kg) - Chip conveyor (4.85 x 1.2 x 1.75 m / 600 kg) - Rotating viewing window - 3D probe RENISHAW MP 10 - Electronic handwheel - Mechanical tool breakage control Accessories (SK 50 tool holders) Approx. 100,200 total operating hours, approx. 52,500 spindle hours, last spindle replacement 2020

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 700 mm, padavimo eiga Y ašimi: 550 mm, padavimo ilgis Z ašis: 550 mm, X ašies eiga: 700 mm, Y ašies eiga: 550 mm, Z ašies eigos atstumas: 550 mm, HERMLE UWF 1001 CNC frezavimo staklės Su CNC valdymu, HEIDENHAIN / Tipas: TNC 155 Gsdpfxjzcmz Ee Afdobn Matavimo zondas / Aušinimo sistema / Drožlių šalinimas Uždanga / Kabina / Valdymo spinta: 1260 x 500 x 1700 mm Judėjimo ruožai: 700 x 550 x 550 mm / Prispaudimo stalo plotas: 1000 x 490 mm

Būklė: geras (naudotas), Gamybos metai: 2000, X ašies eiga: 1 200 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 500 mm, Įranga: drožlių transporteris, Excellent overall condition. Used by a plastics mold manufacturer, primarily for engraving work. Low cutting forces, low machine stress. Travel ranges: X = 1200 mm, Y = 800 mm, Z = 500 mm Spindle speed: 0 – 8,000 rpm / Main spindle drive power: 11 kW Feed rate: 0 – 30 m/min / Table dimensions: 1320 x 800 mm Maximum table load: 2,000 kg / 20-position automatic tool changer / Maximum tool diameter: 63 mm / Tool length: 200 mm / Tool holder: SK 40 Gjdpfx Aezcmy Isfdobn Heidenhain 3D measuring probe, type TS 220 Coolant system / Chip conveyor / Extraction unit (optional) / Full enclosure Heidenhain CNC control, type TNC 426 PB digital / Heidenhain HR 410 electronic handwheel

Būklė: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Techniniai duomenys x eiga: 620 mm y eiga: 420 mm z eiga: 400 mm Valdymas: Heidenhain TNC 410M Stalo plotas: 800 x 400 mm Įrankio tvirtinimas: ISO 40 Gbsdpezaakbsfx Afdsn Pagrindinio veleno apsukos (be pakopų): 50 - 4000 aps./min Pagrindinio variklio galia: 5,5 kW Bendras galios poreikis: kW Staklių svoris apie: 2,1 t Reikalinga vieta apie: m Papildoma informacija * CNC valdymas HEIDENHAIN TNC 410M * Aušinimo skysčio įranga * Staklių apšvietimas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Techniniai duomenys x eiga 300 mm y eiga 160 mm z eiga 290 mm Stalo matmenys 600 x 210 mm Įrankio laikiklis SK 40 Veleno apsūkų diapazonas (16) 40 - 2000 aps./min Begaliniai padavimai 5 - 500 mm/min Greitas padavimas 1,2 m/min Veleno pavara 1,5 / 1,9 kW Bendras galios poreikis 9,5 kVA Staklių svoris apie 830 kg Reikalinga vieta apie 2000 x 2200 x 1655 mm Papildoma informacija Staklės labai geros būklės, atvežtos iš mokymo dirbtuvių. Komplektacija: * 3 ašių pozicionavimo valdymas su aktyviu skaitmeniniu ekranu Heidenhain TNC 123 - Rankinis režimas: valdymas rankiniu būdu ir pozicionavimas su rankiniu įvedimu Gbodpfx Aoy U U Niefdon - Automatinis režimas: atskirų eilučių programavimas, programų įrašymas * Fiksuotas kampinis stalas * Perstumiama vertikali frezavimo galva, posvyrio kampas +/- 90°, pinolės eiga 60 mm * Aušinimo skysčio įranga * Centrinis tepimas * Atrama su priešingu guoliu * Antivibracinės kojos * Dokumentacija

Būklė: paruoštas naudoti (naudotas), Sūkių dažnis: 0-3150 aps./min, elektros prijungimas: 20A, prijungimo galia: 9kW, valdymas: Heidenhain TNC 155, ilgis: 2700 mm, plotis: 2900 mm, aukštis: 2000 mm, svoris: 2,3 t. Apžiūra vietoje galima. Gbjdpfx Ajzavyxefdon

Gamybos metai: 2017, būklė: paruoštas naudoti (naudotas), - NAUDOTA - C.N.C. FREZAVIMO STAKLĖS SU VAŽIUOJANČIA KOLONA IR AUTOMATINE A/B AŠIES GALVA ILGINIS EIGA: 3000 mm SKERSINĖ EIGA: 1100 mm VERTIKALI EIGA: 1500 mm GREITOSIOS PADAVOS: 35 m/min STALO DYDIS: 3100 x 1000 mm GALVA: NEPERTRAUKIAMO VEIKIMO; ISO 50; 8000 aps./min; 25/33 kW; 480/640 Nm Gbodpfx Afeumpd Asdjn ĮRANKIŲ MAGAZINAS: GRANDININIS; 24 POZICIJOS VALDYMO BLOKAS: HEIDENHAIN TNC 640 AUKŠTO SLĖGIO AUŠINIMAS: 15 Bar SVORIS: 30500 kg BENDRI MATMENYS: 8000 x 5320 x 4265 mm PRIEDAI: DROŽLIŲ TRANSPORTERIS; ETERNETO PRIJUNGIMAS; NEŠIOJAMAS VALDYMO RANKENĖLĖ; LINIJINIAI VALDYMO JUTIKLIAI; ORO SRAUTAS PRO VERŽLĖS VELENĄ PASTABA: LAZERINIS ĮRANKIŲ NUSTATYMO PRIETAISAS BLUM; JUTIKLINIS ZONDAS RENISHAW RMP-60; IŠORINIS MGĖNIMO PURKŠTUVAS PER VERŽLĖS VELENĄ; APSAUGA PENDELINIO APDIRBIMO REŽIMUI

Būklė: geras (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, SHW UF 31, pagaminimo metai 1995, valdymas Heidenhain TNC 415 B, eigos ilgiai X/Y/Z 1000/700/625 mm, pastūma X/Y/Z 2 000 mm/min, greitasis eiga X/Y 4 000 mm/min, greitasis eiga Z 2 000 mm/min, apskritojo stalo pastūma iki 4 aps./min, pagrindinis variklis 20 kW, įrankio tvirtinimas SK 50, programuojama frezavimo galva, perjungimo laikas horizontalioje/vertikalioje padėtyje 6 sek., NC apskritasis stalas, veleno sukimosi greitis be laipsnių iki 2 500 aps./min, plokščiųjų dantų pavara, frezavimo galva pasukama +/- 90°, pinolė rankiniu būdu 115 mm, varikliu valdoma pinolė 100 mm, elektrinis rankinis ratukas, pajungimo galia 35 kW. Frezavimo veleno guolis atnaujintas 2025 m. Gbodeyx Un Tspfx Afdon

Būklė: geras (naudotas), Gamybos metai: 1988, CNC Milling Machine Manufacturer: MAHO Type: MH 500 W Year: 1988 Control: Heidenhain TNC 232 B Gbodsich Ehspfx Afdon Equipped with counter bearing for horizontal milling. Spindle taper: ISO 40 Infinitely variable spindle speeds: 20 - 4000 rpm Feeds: 1-3000 mm/min Travels: X 500 mm, Y 380 mm, Z 350 mm Table size: 700 mm x 350 mm Weight: approx. 2,000 kg Machine documentation available The machine is ready for demonstration.

Būklė: geras (naudotas), Gamybos metai: 1988, CNC Universal Console Milling Machine, Manufacturer: KLOPP, Type: FWS15, Year: 1988 CNC contouring control: Heidenhain TNC 155. Travel distances: X: 1170 mm, Y: 420 mm, Z: 420 mm Clamping table: 1500 x 400 mm Spindle taper: SK50 Spindle power: 15 kW Spindle speeds: 35–3550 rpm Counter bearing for horizontal milling Coolant system, chip tray, Various tool holders Complete machine documentation. Machine is immediately ready for operation Godpebu Em Aofx Afdsbn Workshop tested. New parameters and batteries installed on 20.08.2020. Good overall condition. Machine can be demonstrated under power.

Būklė: geras (naudotas), Gamybos metai: 1990, CNC milling machine, manufacturer: TOS, model: FGS40CNC Control: Heidenhain TNC 355, year of manufacture: 1990 Travel paths: X 1000 mm, Y 500 mm, Z 500 mm Spindle taper: ISO 50. Gbodsdtfhqopfx Afden

Būklė: naudotas, Gamybos metai: 2000, X ašies eiga: 9 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 1 500 mm, stalo plotis: 1 200 mm, stalo apkrova: 5 000 kg, stalo ilgis: 9 500 mm, CNC Bed Type Milling Machine, 5-Axis Gbedjzauvfepfx Afdsn Table size: 9500 x 1200 mm Travel paths: X-axis 9000 mm, Y-axis 1500 mm, Z-axis 1500 mm Maximum table load: 5000 kg/meter Vertical milling head swivels by 1° x 1° CNC control: Heidenhain TNC 430 CB If you have any questions regarding the machine or wish to arrange a viewing appointment, please do not hesitate to contact us by phone or email.

Būklė: naudotas, Universal tool milling machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 path control. Machine number: 80983, year of manufacture: 1982 The machine was overhauled by MMD in 2008 and has since been only rarely used in an electronics company’s maintenance workshop. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm, 18 steps Feed rate X, Z axis: 10-500 mm/min, stepless Feed rate Y axis: 5-250 mm/min, stepless Rapid traverse X, Z axis: 1.4 m/min Rapid traverse Y axis: 0.7 m/min Quill stroke vertical: 100 mm Quill feed vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill stroke horizontal: 100 mm Spindle drive: 5.5 kW Power connection: 380 Volt, 50 Hz, 10 kW Equipment/features: - NC path control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed from 0.02 to 0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tiltable and swivelable by 30°, 225 mm transverse adjustment - Rotary table with direct division 72 x 5° and indirect division via index plate 1:120 = 1 rotation = 3° - Swivelling control panel - Centralized lubrication - Operating manual included Gbsdpfxjv Amryo Afdsn - Machine mounted on a steel plate (L x W x H: 1400 x 1000 x 50 mm = 550 kg) Space requirement (L x W x H): 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (measured) Condition: very good