Testavimas pirkti naudotą (181)

Sąlyga: labai geros būklės (naudotas), Zwick/Roell Zwick / Roell ProLine 10 kN Universal Testing Machine – testXpert II V3.61 Description: For sale is an electromechanical universal testing machine Zwick/Roell ProLine with a nominal force of 10 kN, equipped with a Zwick/Roell Xforce-P load cell and the material testing software testXpert II, version 3.61. The system is suitable for standardized and customer-specific material tests in quality assurance, research, development, and production. Thanks to its modular design, different testing methods and fixtures can be used. Software – Zwick/Roell testXpert II V3.61 The machine is operated via the professional testing software testXpert II V3.61. This software is the industry standard in material testing and enables: - Creation, management, and execution of testing standards - Real-time measurement of force, displacement, and time - Automated test sequence control - Graphical display of measurement curves - Standard-compliant evaluation and test reports - Export of measurement results (e.g., PDF, CSV – depending on configuration) Several testing standards (e.g., tensile, compression, and calibration procedures) are installed on the system (see software screenshots). Possible Testing Methods With the current configuration, the following tests can be performed, among others: - Tensile testing (e.g., plastics, metals, composites) - Compression testing - Flexural testing - Determination of Fmax / breaking force Nwsdpoyc R R Dsfx Af Nsb - Force and displacement monitoring - Calibration and adjustment procedures for load cells (Test procedures depend on the grips and fixtures used) Technical Data Manufacturer: Zwick/Roell Model: ProLine Nominal force: 10 kN Load cell: Zwick/Roell Xforce P Sensitivity: 2 mV/V Electrical Data: Power supply: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Dimensions & Weight (approx.) Height: approx. 1,900 mm Width: approx. 800 mm Depth: approx. 700 mm Weight: approx. 200 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Zwick/Roell ProLine 10 kN testing machine Xforce-P load cell (10 kN) Control unit PC with testXpert II V3.61 Fixtures / tools as shown in the pictures (Specifications and technical details are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Universal Testing Machine PM3 Force: 3 kN Crosshead travel: 1200 mm Working area depth: 66 mm Overall height: 1677 mm Weight: approx. 55 kg Displacement resolution: 0.01 mm Njdoyc U Rbepfx Af Nswb Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 3 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick testing" without the need for a PC. For tests that require data storage and curve recording, our basic software provides control and evaluation functions. This enables the creation of various test routines and automated test reports. Additionally, you have the capability to export raw data for further processing in your own software. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips & fixtures: Compression plates, bending devices, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Universal Testing Machine PM3 Force: 3 kN Crosshead Travel: 520 mm Test space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for quick tests even without a PC. For tests that require data storage and curve recording, our basic software provides the option for control and evaluation. This enables the creation of various test workflows and the generation of test reports. Raw data can also be further processed in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 Nwodpfx Afsfdzupj Nob - Test fixtures: Compression plates, bending devices, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Universal Testing Machine PM3 Force: 3 kN Crosshead Travel: 520 mm Working Depth: 66 mm Total Height: 1036 mm Weight: approx. 40 kg Displacement Resolution: 0.01 mm Test Speed: 1–500 mm / min Return Speed: 700 mm / min Load Cell: 3 kN Including evaluation electronics and basic software. Our testing machines are fully operable in stand-alone mode via a numerical keypad, allowing for quick tests without requiring a PC. For tests that require data storage or the recording of load curves, the basic software enables control and evaluation. Nwodpfx Aod R Dpuef Neb The software allows you to create various test routines and generate a test report. Additionally, it provides the option to export raw data for further analysis in your own programs. Optional features: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping tools: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Sąlyga: geras (naudotas), Test device for extension cables - Socket tester Nedpfeb A Iufox Af Njwb - Test device for: extension cables, power strips - Weight: 30 kg

Sąlyga: naudotas, SincoTec Model: POWER SWING 100 MOT Big Table The POWER SWING 100 MOT from SincoTec is a high-performance resonance testing rig for fatigue testing of materials and components. This system enables dynamic load testing with high forces (up to ±100 kN) with precise control. Typical applications include service life testing, fatigue strength tests, and component validation under realistic conditions. Its robust construction, precise sensors, and stable granite table make this test stand ideally suited for research, development, and quality control in industry and academia. Notes: The resonance test stand is ideal for dynamic load testing of materials and components. Technical Data: General Data – Test Stand: Overall height: 1215 mm (without clamping device) Width: 2005 mm Depth: 1205 mm Maximum force amplitude: 50 kN Maximum total force: ±100 kN Sensor accuracy: min. Class 1 (according to DIN EN 10002-3) Control Cabinet: Overall height: approx. 1800 mm Tabletop height: 1080 mm Width: 650 mm (narrow table) / 1420 mm (wide table) Depth: 700 mm Weight: 180 kg (with granite tabletop approx. 240 kg) Color: RAL 9006 (White Aluminium), tabletop Midnight Installation Requirements: Space required: 4.3 × 3.0 m Required ceiling height: min. 2.5 m Floor load capacity: 2.0 t/m² Power supply: 400 V / 50 Hz (three-phase, clockwise rotation) Connection: CEE socket 5-pin, 16 A Fuse protection: 16 A Weight: approx. 3.6 t Condition: used Nedsxrlkvopfx Af Nswb Scope of delivery: (See photo) (Specifications and technical data subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer you a Zwick / Roell universal testing machine / table-top tensile testing machine. Zwick / Roell Material Testing Machine Model: BDO-FB0.5TH Test load capacity tension/compression: 500 N Height: 1565 mm, Width: 292 mm, Depth: 469 mm Test area width: unlimited Nodpfx Asd Sr S Ijf Newb Test area depth: 100 mm Max. travel without accessories: 1266 mm PC or printer interface: RS 232 Required PC connection (for PC operation): COM 1 Power supply: 115/230 V (PH, N, PE) Nominal power: 0.4 kVA Mains frequency: 50/60 Hz Weight: 47 kg Type: BDO-FB0.5TH Condition: used Scope of delivery: (see image) (Subject to modifications and errors in the technical data; all information is non-binding!) If you have further questions, we are happy to answer them by phone.

Sąlyga: naudotas, Type: POWER SWING 20 kN Sincotec Resonance Test System Power Swing 20 kN Manufacturer Maintenance Performed General Information For sale is a used resonance test system Power Swing 20 kN from Sincotec Test Systems GmbH. The test stand was operated in single-shift mode and all maintenance work was regularly carried out by the manufacturer. Special Features: - Robust construction for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance available - Ideal for research, testing, and development applications Technical Data – Test Stand Specification / Value - Overall height of test stand: 1215 mm (without clamping device) - Width of test stand: 2005 mm - Depth of test stand: 1205 mm - Maximum force amplitude: 10 kN - Maximum total force: ±20 kN - Accuracy of measuring transducers: min. Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Specification / Value - Overall height of control cabinet: approx. 1800 mm - Table top height: 1080 mm - Width of control cabinet: 650 mm (narrow tabletop) / 1450 mm (wide tabletop) - Depth of control cabinet: 700 mm (narrow tabletop) / 800 mm (wide tabletop) - Weight: 152 kg (small tabletop), 187 kg (large tabletop), with granite plate: 247 kg Requirements for Installation Site Specification / Value - Space required: 4.3 × 3.0 m - Required ceiling height: 2.5 m - Floor load capacity: 234 N/cm² Power Supply Conditions Specification / Value - Voltage: 400 V three-phase with neutral and protective earth - Phase sequence: right-handed - Voltage fluctuations: ≤ ±10% Nwedpfxoxrffas Af Neb - Short interruptions: < 20 ms - Limits for continuous interference: radio interference level A according to VDE 0871 - Frequency: 50 Hz ± 1% - Protective earth / earthing resistance: < 0.3 Ω Connection and Protection Specification / Value - Power supply: 400 V / 50 Hz (right-handed phase) - Connection plug: CEE socket, 5-pin, 16 A - Fuse protection: 16 A Weight of test stand: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (See picture) (Subject to change and error in technical data and information!) If you have further questions, we will be happy to answer them by phone.

Sąlyga: naudotas, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use incl. PC, Software & Technical Documentation For sale is a professional battery test system consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideal for battery module testing, research, development, and quality assurance. Technical Specifications – Scienlab SL1001A: Feature / Description Manufacturer: Keysight / Scienlab Model: SL1001A Year: 2020 Voltage / Current / Power: 80 V / 600 A / 24 kW Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m Weight: approx. 700 kg Function: Charging, discharging, and cycling of battery modules Condition: Very well-maintained, lab use Technical Specifications – Angelantoni DM500 C 10 ESS SPEEDY BT SP: Feature / Description Manufacturer: Angelantoni Industrie S.r.l., Italy Model: DM500 C 10 ESS SPEEDY BT SP Year: 2019 Weight: approx. 1,225 kg Temperature range: −70 °C … +180 °C Humidity range: 10 … 98% rH Refrigerants: R449A + R23 Pressure ranges (PS Hi/Lo): 28 bar / 8 bar Wi-Fi integrated CE marking present Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m Function: Temperature and humidity testing, ESS (Environmental Stress Screening) Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A Max. power consumption: 32.5 kW Monitoring/Sampling Unit Dimensions: 0.6 × 0.5 × 0.2 m Measured variables: cell voltages, current, temperature Interfaces: CAN, Ethernet Compatible with Scienlab / Keysight PathWave Software PC + Software + Documentation Industrial PC with control and measurement software Enables automated test sequences, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Njdpfxsxuqk Ho Af Nowb Angelantoni Climate Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total System approx. L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifecycle evaluation of battery modules (e.g., Li-Ion, LFP, NMC) - Rapid charging and cycle tests - Environmental simulation of temperature and humidity - Research, industrial, and university laboratories Important Note: "The bench shown in the photos is not included in the sale." Scope of Delivery - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring / Sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) For further questions, we will be happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), GALDABINI Type: Quasar 50 / Rated Capacity: 50 kN with PC, monitor, and testing software GraphWork 5 Universal Testing Machine The universal testing machines of type "QUASAR" are designed as single-space testing machines and essentially comprise the following assemblies: Machine frame: The construction and structure of the machine load frame are designed to withstand the specified maximum loads where required. Electromechanical load application with toothed belt drive, pulleys, drive with DC or brushless servo motor, and ball screw spindles. Load measurement system with force transducer suitable for both tension and compression tests. Electronic control unit that manages all functions: regulation and control, monitoring, and acquisition of output signals from the measuring amplifiers for force, elongation, and crosshead travel. The system is based on a 32-bit processor with a clock rate of 25 MHz; analog signal acquisition is performed by a 20-bit A/D converter. The electronic controller is usually installed in the machine base alongside most of the electrical drive and power supply components. Operator interface via PC, connected to the electronic control board via a high-speed RS232 serial interface at 38400 baud. Rigid two-column system with a maximum capacity of 50 kN Suitable for metals, plastics, composites, and other materials Stylish design and advanced features Flexible and modular design for easy future upgrades Key technical benefits include extremely high resolution of load and travel values as well as a minimum test speed of 0.0005 mm/min for superior performance and highly accurate results Technical Specifications: Rated capacity: 50 kN Speed at maximum load: 0.0005–200 mm/min No-load speed: 500 mm/min Distance between grips: 1000 mm Total travel: 1000 mm Crosshead travel resolution: 0.1 µm Positioning repeatability: 2 µm Distance between wedge grips: 480 mm Clearance between columns: 410 mm Force units: Newton - daN - kgf - lbs Dimensions: Height: approx. 1548 mm Width: approx. 700 mm Depth: approx. 730 mm Power connection: 220V (+10%) 50 Hz Power consumption: 0.65 kW Weight: approx. 255 kg without accessories Nsdpfxsv Tywqe Af Newb Recommended lighting during use: 300 lux Weight: approx. 255 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data, specifications reserved!) For further questions, we are happy to assist you by phone.

Sąlyga: naudotas, SincoTec Type: Exciting Mot Resonance Test Bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a two-mass oscillator. It consists of a vibration head, which is excited via a frequency-controlled asynchronous motor with an unbalance motor, positioned at the top of the machine and generates the dynamic amplitude. The vibration head is supported on the upper crosshead by pre-loaded compression springs and is guided centrally. The mid-load drive is located at the bottom of the machine and applies the static preload via a geared motor and spindle drive. The specimen chamber is situated above the clamping table and is limited on top by the adjustable crosshead. The control of the test bench is handled by the EXCITING MOT regulation system. The complete control electronics for the regulation system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical Data: General Data Test Bench: Total height of test bench: 1840 to 2240 mm Height of machine table: 1030 mm Width of test bench: 800 mm Depth of test bench: 1500 mm Height of specimen chamber (max.): 600 mm (excluding force transducer) Clear column passage: 550 mm Maximum force amplitude: 10,000 N Maximum total force: ±20,000 N Maximum stroke: ±5 mm Test frequency: 30 to 110 Hz Transducer accuracy: minimum class 1 (according to DIN EN 10002-3) Weight of test bench: approx. 1880 kg Max. weight of clamping fixture: 150 kg General Data Control Cabinet: Total height of control cabinet: 1900 mm Height of table top: 1080 mm Width of control cabinet: 650 mm Depth of control cabinet: 700 mm Weight of control cabinet: 152 kg Color: RAL 9006 (White Aluminium), Tabletop Midnight Site Requirements: Space requirement: 2.5 x 2.5 m Required ceiling height: 2.8 m Floor load capacity: 170 N/cm² Power supply: 400 V / 50 Hz (clockwise phase sequence) Connection plug: CEE socket, 5-pin, 16 A Circuit protection: 16 A Connection and Environmental Conditions Network specifications: Voltage: 400 V three-phase with neutral conductor and protective earth, clockwise phase sequence Voltage fluctuations: < ± 10% Short-term voltage dips: < 20 ms Limits for continuous interference: Interference degree A according to VDE0871 Frequency: 50 Hz ± 1% Njdpsvx Su Sjfx Af Nowb Protective earth resistance: < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information may be subject to modification!) Further questions can be answered by phone.

Gamybos metai: 2000, Sąlyga: naudotas, Verkauft als Ersatzteilspender, ADU-Karte fehlt. Automatisches Tabletten-Testsystem - Labormessgerät - Tablettenprüfvorrichtung Ermöglicht die Prüfung von: - Härte - Durchmesser - Dicke - Gewicht Nodsx Rz I Djpfx Af Nowb Präzisionswaage Sartorius WZ64S Meßbereich: 10 bis 50 g Ablesung: mg / 0,5 mg / 0,1 mg einstellbar Dicke Antrieb: Schrittmotor Meßprinzip: Linearpotentiometer Meßeinheit: mm oder Zoll Toleranz: +/- 0,1 mm Härte Antrieb: Schrittmotor Messung: Wägezelle (lmz) Meßprinzip: Dynamometer Einheit: N, Kp oder Sc Durchmesser Antrieb: Schrittmotor Meßprinzip: Schrittmotor Meßeinheit: mm oder Zoll Skala: 3 - 18 mm / 3 - 30 mm (manuell) Toleranz: +/- 0,1 mm Spannung: 100 / 240 V, 50Hz / 60 Hz Das UTS ist ein universelles, vollautomatisches Prüfsystem, das für den industriellen Einsatz entwickelt wurde. Dieses Gerät ist das zugelassene Modell einer Serie von Testsystemen, die über viele Jahre erprobt wurden. Es wurde in enger Zusammenarbeit mit der pharmazeutischen Industrie entwickelt. Das UTS 4.1 eignet sich für die Prüfung von runden, ovalen, quadratischen und länglichen Tabletten sowie vieler Sonderformen. Für empfindliche Oblong-Tabletten kann das bewährte Oblong-Zentriersystem (OZB) integriert werden. Alle zu reinigenden Teile können schnell und werkzeuglos entnommen werden. Das Prüfsystem kann mit verschiedenen Optionen ergänzt werden, z.B. einem Verteiler und/oder Probenfänger mit unterschiedlicher Stationsanzahl. Nutzen Sie das UTS als Laborprüfgerät oder als Online-Kontrollsystem direkt an der Tablettenpresse. Die Probenahme kann entweder in der Produktionsmaschine oder mit der TTS11-Software ausgelöst werden.

Sąlyga: naudotas, Zwick traukimo mašina Tipas: Z20 Valdymas: BX1-EZ020.A4K-000 Techniniai duomenys: Eiga: 200 mm Stūmoklio matmenys (A x P x G): 1037 x 385 x 180 mm Maksimali jėga (Fmax): 20 kN Maksimalus greitis (Vmax): 125 mm/s Priedai: Extensometras ClipOn 13,5 mm Extensometras MFA 25 (temperatūros diapazonas iki +200°C) Kompiuteris + programinė įranga testXpert II V3.5 Klimato įrenginys: Airtemp LKG-K-TK-50-040/150 Temperatūros diapazonas: -40°C iki +150°C Klimato temperatūros diapazonas: 20°C iki +90°C Drėgmės diapazonas: 10% iki 95% Nsdpox A Aa Aefx Af Nowb Bandomosios kameros talpa: 50 litrų Temperatūros pokytis: 1 K/min Šaltnešis R404, 5 kg Įtampa: 400 V, 3 Ph/n/PE/50 Hz 16 A 9 kW Būklė: naudota / used Bendras svoris apie 1500 kg Komplektacija: (žiūrėti nuotrauką) (Techninių duomenų pakeitimai ir neatitikimai galimi!) Dėl papildomos informacijos maloniai kviečiame susisiekti telefonu. Užsakymus galima pateikti el. paštu arba faksu.

Sąlyga: naudotas, Zwick Tipas: Z30 Techniniai duomenys: Bendras aukštis: 2114 mm, plotis: 748 mm, gylis: 580 mm Fmax: 30 kN Vmax: 125 mm/s Priedai: Extensometras ClipOn 13,5 mm Extensometras ClipOn 40 mm Kompiuteris + programinė įranga testXpert II V3.5 Bendras svoris: apie 500 kg Būklė: naudotas Pristatymo apimtis: (žr. nuotrauką) (Techninių duomenų pakeitimai ir klaidos galimi!) Dėl papildomų klausimų galite kreiptis telefonu. Nsdpfx Afox Az Sko Nowb

Sąlyga: paruoštas naudoti (naudotas), Prieinamos dvi trifazės „Spitzenberger“ tinklo simuliacijos sistemos, skirtos laidiniams EMC bandymams ir tinklo atkūrimui. Išėjimo galia: 30 kW, įtampos diapazonas: 135–270 V, maksimali dažnis: 5 kHz, galios pakopos: PAS 4-kvadrantinis įtampos stiprintuvas, signalo šaltinis: SyCore savavališkas generatorius, analizatorius: ARS etaloninis analizatorius, tinklo varža: AIP. Yra dokumentacija. Galima apžiūra vietoje. Nwsdpfxsx El Ans Af Nob

Sąlyga: naudotas, Gamybos metai: 2020, Mehrere Einheiten verfügbar und alle in betriebsbereitem Zustand. Die Maschinen sind Serie 6. Njdpowcrlkefx Af Nswb Für weitere Informationen bitte anfragen!

Sąlyga: naudotas, Šis pasiūlymas skirtas PALL Palltronic Compact Star įrenginiui. Įrenginys yra visiškai veikiantis ir paruoštas nedelsiant naudoti. Komplekte: 2 atsarginės Epsom juostų kasetės ir programinės įrangos diskas. Nwodpfx Ajxx Atuof Neb Automatinis integralumo testas – tiek forward flow, tiek pressure hold metodiškai – yra tarptautiniu mastu pripažintas kaip objektyvus ir nedestruktyvus būdas nustatyti, ar filtras atitinka mikroorganizmų šalinimo specifikacijas ir yra teisingai sumontuotas. Testo rezultatai aiškiai ir tiksliai parodo filtro integralumą prieš jo naudojimą. Integralumo testavimas su Palltronic Compact Star įrenginiu yra patikimas, ekonomiškas ir patogus operatoriui. Šis įrenginys skirtas atlikti slėgio palaikymo (Pressure Hold) testą – nedestruktyvų metodą, kuris matuoja slėgio kritimą laikui bėgant. Testo metu filtras automatiškai užspaudžiamas iki nustatyto slėgio lygio, leidžiamas slėgiui stabilizuotis, tuomet įrenginys atlieka matavimą ir per išleidimo vožtuvą sumažina slėgį. Pilnai automatizuotas Palltronic Compact Star įrenginys pašalina rezultatų kintamumą, kuris gali atsirasti dirbant su rankinėmis sistemomis. Tai paprastas, greitas ir objektyvus filtro integralumo patikrinimas.

Sąlyga: naudotas, Diese Anzeige bezieht sich auf das KSA SQ1E Dampfqualitäts-Prüfkit. Das System befindet sich in ausgezeichnetem Arbeitszustand und ist sofort einsatzbereit. ----- Systemübersicht Das KSA SQ1E ist ein tragbares, luftgekühltes Prüfgerät zur Bestimmung der Dampfqualität, entwickelt für die Durchführung von Prüfungen auf Nichtkondensierbare Gase (NCG), Trockenheit und Überhitzung gemäß EN 285 und HTM Standards. Es bietet eine vollständige, eigenständige Lösung zur Validierung von Rein- und Reindampfsystemen in pharmazeutischen, biotechnologischen und medizinischen Einrichtungen. Im Gegensatz zu herkömmlichen Systemen verwendet das SQ1E einen eingebauten elektrischen Lüfterkondensator, der den Bedarf an Kühlwasser eliminiert und Prüfungen überall mit minimalem Aufwand ermöglicht. Das kompakte und robuste Design macht es ideal für Dampfqualitätsprüfungen, Validierungen und Qualifizierungsarbeiten vor Ort. ----- Hauptkomponenten KSA SQ1E Dampfqualitäts-Testeinheit – voll luftgekühlte Kondensatoreinheit mit integriertem Messzylinder und Bürette zur NCG- und Trockenheitsprüfung. Testaufbau für Trockenheit und Überhitzung – umfasst Versuchsausdehnungsrohr, Pitotrohre, Kolben und Temperaturfühler-Anschlüsse. Integrierte Bürette und Messzylinder – beleuchtet und mit Drucktasten-Nullstellung sowie Pausenfunktion für präzise Messwerte ausgestattet. Stromversorgung – 12 V DC-Betrieb für Lüfter und interne Elektronik. Dampfanschlusssatz – beinhaltet Tri-Clamp- und Schlauchanschlüsse für die Verbindung mit Reinstdampfsystemen. Transportkoffer – kompakte und robuste Ausführung mit Tragegriff und Arbeitsablage für den Feldeinsatz. Betriebsanleitung und Dokumentation – enthält standardisierte Testverfahren, Anleitungen zur Einrichtung sowie Ergebnisvorlagen. ----- Hauptmerkmale Luftgekühlter Kondensator eliminiert den Bedarf an externem Kühlwasser. Führt alle erforderlichen Dampfqualitätsprüfungen durch: Nichtkondensierbare Gase, Trockenheit und Überhitzung. Integrierte Bürette und Messzylinder für genaue und reproduzierbare Messungen. Drucktasten-Nullung, Pausenfunktion und beleuchtete Anzeige für einfache Bedienung. Portables Plug-and-Play-Design, ideal für Validierung und Prüfungen vor Ort. Volle Übereinstimmung mit EN 285, HTM und pharmazeutischen Reindampf-Standards. ----- Technische Daten Hersteller: KSA (Keystone Scientific / KSA Pharma) Modell: SQ1E Typ: Dampfqualitäts-Prüfkit Stromversorgung: 12 V DC Kühlart: Luftgekühlt, ventilatorunterstützter Kondensator Funktionen: NCG-, Trockenheits- und Überhitzungsprüfung Nodpoxqqyyofx Af Njwb Betrieb: Manuell/tragbar Konformität: EN 285, HTM, AAMI, PDA-Richtlinien Ausführung: Edelstahl- und Aluminiumkomponenten im robusten Transportkoffer

Sąlyga: naudotas, Test bench, test station, measurement station, test device, measuring device, tester for HV, PE, IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High Voltage Test Device The PE/IS/HV / 91-3J.3 device is used for measuring dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 and IEC regulations per EN60204, Part 1. Serial no.: Year of manufacture: 2003 Nominal voltage: 230 VAC Nominal frequency: 50 Hz Nominal current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The SHV 16 / 90-1V.3 device provides a highly stable DC voltage with low ripple. One output terminal delivers high voltage, while the other is near earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Nwsdpsd Dc Unefx Af Neb Mains frequency: 50 Hz Nominal current: 1 A Noise suppression according to VDE 0871 Rated power: 14 Watt Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connector unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Nominal voltage: 230 VAC Nominal frequency: 49 - 61 Hz Nominal current: 1 A Number of test points: 5 - Compact device unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many more ELABO devices available under stock numbers 57820 and 57821

Sąlyga: naudotas, Test bench, test station, measuring station, test device, measuring instrument, tester for HV, PE, IS measurement ELABO type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations (EN60204, Part 1). Nwedpfjf Axn Ajx Af Nob Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement Device 90-1V provides a highly stable DC voltage with low ripple. One output terminal supplies high voltage, the other is near earth potential and can be set to a maximum of 300 V. Device No.: 90-7WZ006 Year of manufacture: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 Watt Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact device unit on castor frame - Various connection cables and accessories as pictured Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices available under stock numbers 57819, 57820 and 57821

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in excellent condition. The SEFELEC 506-S test device for electrical safety testing—an EATON new generation model—is based on ARM Dual Core technology and controlled by DSP. This technology provides the user with optimal stability and repeatability of measurements. Its high accuracy and measuring speed meet the requirements for quality assurance in production and incoming goods inspection. The sequence function facilitates operation of the SEFELEC 506-S test station when integrated into a test bench or test setup. The 7" touchscreen of the new SEFELEC model series offers simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic test series selection Nwsdpfxexqxw Te Af Nob - Sequence mode for combining several successive tests Dielectric strength at 5kVAC 500VA and 6kVDC Detection modes via current threshold or current fluctuation (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 stages 7” TFT touchscreen, 16 million colors, for programming as well as for displaying ongoing tests and results Integrated ARM Dual Core Control & Nand 3D technology for optimal accuracy, stability, and repeatability Integrated DSP enables higher test speeds Large internal memory for storage of configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – particular requirements for testing and measuring circuits and equipment for insulation resistance and dielectric strength) Shipping can be arranged upon request. #8312-2

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Safety Tester for High Voltage Test Bench - EATON Sefelec 506-S The device was purchased in 2023 and is in TOP condition. The SEFELEC 506-S test device for electrical safety testing, a new generation EATON model, is based on ARM Dual Core technology components and is controlled by DSP. This technology provides the operator with optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC series impresses with its 7” touchscreen, offering simple and intuitive operation. - Standard connections: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 Njdsxqxt Ispfx Af Nowb - Automatic selection of measurement range - Sequence mode for combining several consecutive tests Dielectric strength at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current variations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2 TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp-up, hold, ramp-down Multiple ramp mode, up to 7 stages TFT touchscreen 7”, 16 million colors, for programming and displaying ongoing tests and results Integrated ARM Dual Core Control & Nand 3D technology for optimal accuracy, stability, and repeatability Integrated DSP allows higher testing speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for measurement, control and laboratory use - Particular requirements for insulation resistance testers and dielectric strength test equipment) Shipping is possible upon arrangement. #8312-1

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2009, veikimo valandos: 1 234 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2161, Aerosol can micro leak detector for inline operation, 20-30 cans per minute. Batch and sample testing. Nwsdpfjw Dzrcex Af Neb

Sąlyga: naudotas, Gamybos metai: 2005, Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: ENZ 6CAL, Įranga: CE žymėjimas, Gebrauchte, funktionsfähige Klimakammer, ESPEC ESX-2CA, luftgekühlt. Obwohl dieses Modell ursprünglich über eine Feuchtefunktion verfügt, wurde diese deaktiviert. Das Gerät arbeitet jetzt ausschließlich als Temperaturkammer mit einem Bereich von -70°C bis +150°C. Die Abkühlrate beträgt 4,0°C pro Minute. Innenmaße (B x T x H): 500 mm x 600 mm x 750 mm. Lieferung inklusive Kalibrierung. Nwedpfxowy Uq Ro Af Nob

Sąlyga: labai geros būklės (naudotas), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, manufactured in Japan, in very good technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable, and fully automatic hardness measurements without subjective operator assessment. The equipment is intended for measurement laboratories, quality control departments, production facilities, automotive, aerospace, and toolmaking industries. — Key Information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • AUTOVICK automatic system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Manufactured in: Japan • Power supply: 230 V • Stable, heavy laboratory-grade construction Nodsyc H I Sopfx Af Nowb — Technical Condition • Device is operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for operation after connection — Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and mounts • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg.