Tekinimo Centras pirkti naudotą (12 471)

Sąlyga: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Įranga: sūkių greitis be galo kintamas, Manufacturer: 600 Lathes Model: Harrisson V350 Centre Height: 170 mm Swing over Bed: 350 mm Swing over Cross Slide: 196 mm Swing in Gap: 535 mm Bed Width in front of Chuck: 165 mm Distance between Centres: 650 mm Spindle Speeds (infinitely variable via potentiometer in 3 speed ranges, with digital readout): 15 - 340 rpm 45 - 1010 rpm 150 - 3250 rpm Spindle Mount (Camlock): D1-4 Spindle Bore: 54 mm Spindle Motor: 7.5 kW Saddle Guideway Width: 318 mm Cross Slide Travel: 250 mm Top Slide Travel: 140 mm Tailstock Quill Travel: 140 mm Tailstock Taper: MT4 Quill Diameter: 63 mm Machine is supplied in metric version Threads: Metric: 0.2 - 14 mm (51) Inch TPI: 2 - 56 (56) Module: 0.2 - 3.5 (20) Diametral Pitch: 8 - 56 (20) Drive Power: 7.5 kW Equipment: 3-axis digital readout 3-jaw chuck Röhm, Ø 200 mm 4-jaw chuck, Ø 160 mm Collet chuck Steady rest 4-position quick change toolpost Live centre Chuck guard Additional chip guard on carriage Coolant system Rear splash guard Machine documentation including circuit diagram Dimensions: Floor to spindle centre: 1050 mm Overall length: 1900 mm Overall width: 1100 mm Height: 1300 mm Weight: 1350 kg The machine can be demonstrated under power on site. Njdpfx Afoxcuule Ijcl All information without guarantee. Errors and prior sale excepted.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, used conventional and screw-cutting lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Year of manufacture: approx. 1987 Distance between centers: 750 mm Swing over bed: Ø 330 mm Center height over bed: 165 mm Swing over cross slide: Ø 180 mm Center height over cross slide: 90 mm Spindle bore: Ø 40 mm Tailstock quill taper: MT 3 Quill travel: 110 mm Spindle speed: 45 – 2800 rpm (16 steps + 2 motor speed ranges) Feed range: 0.016 – 0.50 mm/rev Njdpfx Ajvadqzof Iecl Drive power: 1.6 + 3.2 kW (main drive motor stages 1+2) Power supply: 400 volts, 50 Hz Connected load: 32 kW Control voltage: 42 volts Equipment & accessories: - 3-axis Heidenhain digital readout, model VRZ 750 - Quick-clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix quick-change toolpost, size B - LED work light - Bed stop - Automatic longitudinal & facing feeds - Electromechanical spindle brake, switchable - 2x emergency stop - Electronic chuck key interlock (via sleeve with button) - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard wall - Wiring diagram - Adjustable machine feet Space required: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1,100 kg This newer generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated under power on site. All information subject to change. Prior sale reserved.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2013, veikimo valandos: 15 000 h, Pagrindinė pavara Špindelio apsukų diapazonas: 12 000 Įrankio kūgis: Capto C6 Ašių skaičius: 5 Judėjimas Y ašies eiga: 230 mm Nsdpex E Eamefx Af Iocl A ašies eiga: 1550 mm Rušinys Rušinio skersmuo virš lovos: 1000 mm Šis penkiaašis DOOSAN Puma MX2600ST frezavimo-staklės centras pagamintas 2013 metais. Maksimalus tekinimo diametras – Ø 760 mm, detalės ilgis – iki 1540 mm, strypo įvorės talpa – Ø 76 mm. Įrengtas Fanuc 31i-A valdymo sistema, du špindeliai su iki 4000 aps./min. greičiu ir frezavimo špindelis – 12 000 aps./min. Įrankių žurnalas su 80 pozicijų ir drožlių transporteris. Pasinaudokite galimybe įsigyti šį DOOSAN Puma MX2600ST frezavimo-tekinimo centrą. Dėl daugiau informacijos susisiekite su mumis. Taikymo sritys Tekinimas

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Techniniai duomenys: 5 ašys: X; Z; Y; C ir B ašis Sūkių skersmuo: 1250 mm Nodpfx Ajyctgnof Iecl Sūkių ilgis: 1450 mm 2 padėklų vietos Eigos atstumai (X/Y/Z): 1875 / 1550 / 1345 mm CNC valdiklis: MAZAK MAZATROL 640 M Pro Griebtuvo apsisukimų dažnis: maks. 500 aps./min. Frezuotuvo veleno apsisukimų dažnis: maks. 10 000 aps./min. Įrankių keitiklis: 80 pozicijų Įrankio laikiklis: SK 50 Papildoma techninė informacija pagal pareikalavimą Staklių svoris: apie 55 t Priedai: Juostinis filtras Drožlių transporteriai Veleno aušinimo agregatas Alyvos aušintuvas Infraraudonųjų spindulių zondas Įvairūs įrankiai Įrankių spintos Pardavėjas neatsako už rašybos ar duomenų perdavimo klaidas. Staklių techninė ir vizualinė būklė bei nusidėvėjimas atitinka jų amžių; naudotos staklės parduodamos be jokios garantijos.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 90 mm, ašies variklio galia: 40 000 W, veleno greitis (maks.): 4 000 aps./min, sukimo momentas: 190 Nm, bendras aukštis: 2 550 mm, bendras ilgis: 4 325 mm, bendras plotis: 2 350 mm, Strypo skersmuo (maks.): 90 mm, bendras svoris: 14 000 kg, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Pagrindinis ir pagalbinis velenas Njdpsx T A Drsfx Af Iocl

Sąlyga: geras (naudotas), Description: The machine is in good technical condition; testing is possible by prior arrangement. Control system – Siemens, including filtration. Bed slope, bed material, number of guides: 45° cast iron, 3 (4 with Y-axis option). WORKING AREA (V1-V4): - Swing diameter over bed (in): 19.69 - Swing diameter over cross slide (in): 11.42 - Maximum turning diameter (in): 7.87 - Distance between centers (in): 30.71 - Maximum turning length (in): 19.69 (15.82/20) - Max. weight of unsupported workpiece (lb): 35 - Max. center of gravity distance of unsupported workpiece (in): 16.5 from spindle face - Max. weight of workpiece clamped between centers (lb): 100 - Travel X-axis (in): 7.48 - Travel Y-axis (optional) (in): 3.14 (+/- 1.57) - Travel Z1-axis (in): [not specified] Ncedpfx Afsx Apkzs Ijl - Travel Z3-axis (in): [not specified] - Spindle center height above floor (in): 20.67 / 21.65 / 39.26 (38.77 + 1.18) MAIN SPINDLE: - Spindle nose (flat nose) type: FL 140h5 - Chuck diameter (in): 6.69 (option 8.26) - Bar capacity (in): 2.00 - Spindle bore diameter (in): 2.87 - Guide bushing diameter (in): 2.05 - Inner diameter front bearing (in): 3.94 - Spindle bearing lubrication: grease - Power, max. 100/40% duty cycle (hp): 20.82/36.20 - Speed range, 100% duty cycle (rpm): 6000 - Speed range, 40% duty cycle (rpm): 6000 - Rated speed (rpm): 1500 - Max. torque, 100/40% duty cycle (ft*lb): 93.72/125.46 - Power supply type, number of ranges: AC/1 - Motor type: ISM52

Sąlyga: geras (naudotas), Gamybos metai: 2021, veikimo valandos: 2 400 h, Funkcionalumas: visiškai funkcionalus, 2-axis universal turning center with driven tools, C-axis, Y-axis and sub-spindle Machine in extremely well-maintained condition Nedpfxjx Tg I Ue Af Iscl Ergonomic DMG MORI SLIMline® panel Main spindle A2-8" with AC motor, power 17 / 25.5 kW (100/40% DC), 4,000 rpm Radial servo turret VDI 40 with 12 driven stations, Trifix® interface (DIN5480) Direct measuring system for X and Y axis Chip container Hydraulic hollow clamping cylinders, max. bar capacity D80 mm Sub-spindle A2-6" with spindle motor ISM 52, output 13 / 14 kW (100/40% DC), 5,000 rpm Electronic handwheel Y-axis ± 60 mm DMG MORI IoTconnector Control DMG MORI SLIMline® 0i-F Plus Fanuc Touch 19" Bar package & interfaces Part catcher for up to D80 x 200 mm, max. workpiece weight 4 kg Interface for bar feeder or loading device (DMG MORI standard) Right-side chip conveyor Signal lamp with 4 colors Main spindle chuck Hydraulic 3-jaw chuck D254 SMW BB-D 250 Pass-through D78 mm (limits bar capacity to D78 mm) Sub-spindle chuck Hydraulic 3-jaw chuck SMW BB-D 210 Pass-through D66 mm Draw tube inner diameter D52 mm Sub-spindle options External chuck rinse Pneumatic ejector with internal coolant supply Coolant / chip removal 12 bar high-pressure system with double filter and manual switching Coolant spray gun 5 bar Measuring / monitoring Manual tool measuring probe MARPOSS General options Parts conveyor front left instead of parts container Conveyor belt outside the work area Clamping jaw options Set of soft jaws for BB-D 210 (3 pieces per set, 3 sets) Set of soft jaws for BB-D 250 (3 pieces per set, 3 sets) Fanuc options Tool monitoring software NCGuide software for programming environment incl. MANUAL GUIDEi Technology cycle alternating spindle speed Connectivity SERVICEcamera incl. accessories (antenna, charger, SD card) Special equipment / accessories Hydrafeed MSV 80 with floor rails, barfeed magazine, and modifications Swarf bin (model 350) VDI40 holder with multiple seats D1 (2 pieces) VDI40X25/25 double-Y holder for 4x Ø25 mm (2 pieces) VDI40X25X100 25Ø boring bar holder (1 piece) Axial driven tool VDI40, ER32, 1:1, max. 6,000 rpm, external cooling (1 piece) Radial driven tool VDI40 DIN 5480 H=100 mm, ER32, 1:1, max. 6,000 rpm, external cooling (1 piece) Cut-off holder H=32 mm, VDI40, universal toothing (1 piece)

Sąlyga: naujas, Gamybos metai: 2025, CONDOR VC plus The new dimension in the field of conventional precision lathes. A high-quality, powerful, and energy-efficient precision lathe designed for high-productivity use in production and toolmaking, as well as in vocational training and education. High-quality, energy-efficient, precise, and universally applicable for production, training, and continuing education. Key features include: Nedpoqwipnjfx Af Iocl - Future-oriented technology - Maximum accuracy - Long service life - User-friendly ergonomics - Minimal space requirements - Extensive range of accessories The consistent and innovative further development of the well-established Condor series is an economical and intelligent solution for your daily operations. Technical Data: WORKING AREA Center height: 180 mm Swing over bed: 360 mm Swing over cross slide: 190 mm Distance between centers: 800 mm MAIN SPINDLE Spindle nose DIN 55027 / DIN ISO 702-3: Size 6 Spindle bore: 57 mm Spindle front bearing diameter: 90 mm MAIN DRIVE Drive power 60 % / 100 % duty cycle: – / 10.5 kW Speed range: 25 – 4,000 rpm Number of speeds: infinitely variable FEED RANGE Number: infinitely variable Longitudinal: 0.01 – 6 mm/rev Transverse: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MT 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER WTS 15 VC plus screen display - Large, clear 15" touchscreen, rotatable and swiveling, resolution 1366 x 768 - Change operating screens by swiping - Operating functions accessible via app manager - Control panels can be freely configured, positioned, and scaled - Import of drawings/sketches from PDF files via USB interface, individually zoomable - Video-supported machine maintenance - Context-sensitive help menu (instead of WEILER VC plus screen display) The machine is available for immediate delivery and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For details regarding equipment, please contact us.

Sąlyga: geras (naudotas), Used lead and feed screw lathe COLCHESTER MASTER 3250 Centre height: 170 mm Distance between centres: 650 mm Ncjdpjuqkf Nsfx Af Iel Spindle bore: 42 mm Infinitely variable speed from 15 to 3250 rpm 1 x SCHUNK wedge bar power chuck Ø160 mm 1 x MULTIFIX tool post size B with 4 holders Machine lamp, chuck guard electrically secured, machine mounts 1 x revolving live centre 1 x revolving live centre with pressure indicator 1 x drill chuck with morse taper The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Sąlyga: naujas, Gamybos metai: 2025, Praktikant GSD One of the best-selling and most popular conventional precision lathes Distinguishes itself through: sophisticated engineering highest precision durability ergonomics proven in practice minimal space requirements extensive range of accessories Proven over decades in single-part and small-batch production, in craftsmanship and industry, education and further training, as well as tool and jig manufacturing. Centre distance: 650 mm Centre height: 160 mm Automatic handwheel disengagement Lead and feed screw guard Main spindle brake Toolroom accuracy in accordance with DIN 8605 Two-speed brake motor Headstock gearbox 16 fixed speed ranges Digital position display (optional) LED machine lamp TECHNICAL DATA: WORKING RANGE Centre height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Centre distance 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3 Size 5 Spindle bore 43 mm Spindle diameter at front bearing 70 mm MAIN DRIVE Drive power 60%/100% duty cycle 2.6 / 3.1 kW Nsdowhzcpopfx Af Ijcl Speed range 48 – 2,500 rpm Number of speeds 16 FEED RANGE Number of feeds 24 Longitudinal feed 0.02 – 0.63 mm/rev Cross feed 0.006 – 0.2 mm/rev THREAD CUTTING RANGE Metric threads 0.25 – 8* mm TAILSTOCK Quill diameter 40 mm Quill stroke 85 mm Quill taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 * Inch threads and metric pitches 0.45; 0.75; 4.5 and 5.5 are only possible with additional change gears. The machine is available immediately in our showroom in 71334 Waiblingen-Beinstein. For details regarding included equipment, please contact us.

Sąlyga: naudotas, Gamybos metai: 2000, naudotas CONDOR AC, dalinai atnaujintas Centru aukštis: 165 mm Atstumas tarp centrų: 750 mm Veleno skylė: 40 mm Veleno apsukos: 22–2 800 aps./min. be pakopų - Greito keitimo plieno laikiklis Gr. B - WEILER DZ-V skaitmeninis indikatorius - Tuščiaviduris veleno ribotuvas - Stacionari luneta - 7 vnt. Multifix laikiklių - Plokščia apsauginė siena - Elektriškai apsaugotas griebtuvų apsaugas - Kintami ratai ir įvairūs spaustuvai Staklės dalinai restauruotos: Nsdex E Um Njpfx Af Ijcl - Pagrindinis vežimėlis: vedimo kreiptuvės naujai padengtos ir nuskustos, pleištinės juostos ir apatinės spaudimo juostos pritaikytos - Skersinis vežimėlis išmatuotas ir sureguliuotas ant pagrindinio vežimėlio; skersinio vežimėlio kregždutės formos vedimo kreiptuvė naujai nuskusta, pleištinės juostos pritaikytos ir nuskustos - Viršutinis vežimėlis naujai nuskustas ir pleištinė juosta suderinta - Visi matavimo liniuotės atnaujintos ir laidai pakeisti Staklės yra mūsų ekspozicijos salėje, 71334 Waiblingen-Beinstein, ir yra iš karto prieinamos. Dėl įrangos susisiekite su mumis.

Sąlyga: naudotas, Gamybos metai: 2003, mašinos/transporto priemonės numeris: 1527, Naudota COLCHESTER Triumph VS 2500 pagrindinės ir traukos sraigės tekinimo staklės Atstumas nuo centro iki atramos: 195 mm Atstumas tarp centrų: 650 mm Veleno anga: 54 mm Besiūlis reguliuojamas greitis nuo 14 iki 2500 aps./min. Kontrcentro smailė MK5, aušinimo skysčio sistema, greito sriegimo įranga Ncodpfx Afjx Hrums Ijl Skaitmeninis indikatoriaus ekranas FAGOR NUP 300 TS-RS 1 x RÖHM trijų žiočių griebtuvas, 5 pozicijų būgninis ribotuvas, kiaurinis veleno ribotuvas, mašinos apšvietimas, 1 x PARAT 4 pozicijų revolverinė galvutė, 4 x PARAT keičiamų laikiklių, sekimo centras ir greito tvirtinimo gręžimo griebtuvas. Staklės stovi mūsų patalpose, adresu 71334 Waiblingen-Beinstein, ir yra nedelsiant prieinamos. Apžiūrėti stakles galima pagal susitarimą.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 11756, Used lead and feed screw lathe WEILER LZ 280 Njdpfovd Dbnjx Af Ijcl Centre height: 125 mm Centre distance: 800 mm Spindle speeds approx. 26-2000 rpm 1 x three-jaw chuck Ø 125 mm with internal and external jaws, factory new Multifix size A with 2 quick-change toolholders Emergency stop/switch unit, rear swarf guard, all change gears included, dog plate, shelf, machine lamp, new socket, 15 collets from Ø 3.5 - 18.5 mm, collet tension tube, fixed centre and MT2 sleeve for tension tube, bed stop, chuck guard, various turning tools, and operating manual. The machine is located with us in 71334 Waiblingen-Beinstein and is available immediately. Inspection of the machine is possible by appointment.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 1717, Used WEILER PRAKTIKANT lead and feed screw lathe Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, one 3-jaw chuck Ø160 mm, Chuck guard with electrical interlock, Multifix tool post size A with 3 inserts, Lever-operated collet chucking device with 15 collets. Nsdpfx Afeuqb Emo Iocl The machine is located at our premises in 71334 Waiblingen-Beinstein and is immediately available. Inspection of the machine is possible by prior arrangement.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 36 mm, centro aukštis: 155 mm, tekėjimo ilgis: 800 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 25 aps./min, Used L+Z lathe Weiler Condor, No. 7939, Centre height: 155 mm, Centre distance: 800 mm, Spindle speeds: 12-2800 rpm, Spindle bore: 36 mm Ncedpev R Tdxsfx Af Iol Accessories: 1x 3-jaw chuck RÖHM Ø 160 mm, Multifix toolpost body size B with 2 holders, quick-action drill chuck, Live centre and coolant system. The machine is located at our warehouse in 71334 Waiblingen-Beinstein and is immediately available.

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEWLY Refurbished with Acceptance Protocol for New Machine Tolerances Technical Data: – Machine No. 1824 – Center Height: 180 mm – Center Distance: 1000 mm – Spindle Speeds: 13 to 2000 rpm – Spindle Bore: 56 mm – Short Taper Spindle Nose DIN 55029 Size 5 – Tailstock Morse Taper: MK 4 – Feeds: 0.026 to 0.888 mm/rev – Thread Types: Metric, Inch, Module, and Diametral Pitch – Metric Thread Pitches: 0.35 to 12 mm – Weight: approx. 1500 kg – Spindle Brake, switchable – Drive Power: 2.0/4.0 kW – Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: – 3-Axis Digital Readout by K&C, new, 12 months manufacturer’s warranty with operating manual Features: Switching mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching Ncedpfx Afsvrcqdj Iol – 200 mm three-jaw chuck, wedge bar type, like new, 1 set of jaws – Multifix size B with 2 tool holders, NEW – Bed stop – Machine feet – Coolant system – LED machine lamp For added safety, the machine is equipped with: – Electronic spindle guard – Spindle brake – 2 emergency stop switches On request: Covers for the lead and feed screw About the machine: This listing is for a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been reground and hand scraped. Acceptance inspection per test report. Painted in high-gloss 2K white. Accessories such as Multifix and chuck are new. For safety, the machine features a brake motor, electronic spindle guard, and two emergency stop switches—an absolutely as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely operator-friendly, allowing surfaces to be produced as finely as ground. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Schaublin 150 High-Precision Lathe with 2-Axis Digital Readout ND780 Technical Specifications: >> Year of manufacture: approx. 1980 >> Centre height: 150 mm >> Centre distance: 630 mm >> Swing over bed: 340 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric threads: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable spindle speeds: 55–3000 rpm >> Rapid traverse motor: 1500 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 160 mm 3-jaw chuck, 1 set of jaws >> Multifix B, 3 holders >> Collet system with collets >> Change gears >> Stops >> Coolant system >> 1 box of change jaws >> Centres >> Operating manual About the machine: For sale is a Schaublin 150 high-precision lathe. The machine is operational, equipped with rapid traverse, and is in good used condition. Take the opportunity to inspect the machine under power on site and see its condition for yourself. Nodpewynluofx Af Iocl

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Display, NEWLY Refurbished with Inspection Report for New Machine Tolerances Technical Specifications: Ncedpjvrckqofx Af Ijl >> Machine No. 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread cutting possible: Metric, Inch, Module and Diametral Pitch >> Metric Thread Pitch: from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake switchable >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis K&C Digital Readout, new, 12 months manufacturer's warranty with user manual Functions: mm/inch selection, coordinate choice ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 200 mm wedge-bar 3-jaw chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant device >> LED machine lamp For safety the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been newly ground and scraped. Delivery includes an acceptance report according to inspection protocol. Coated with high-gloss 2K white paint. The Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs extremely smoothly. This latest generation of Weiler lathes is especially user-friendly and allows the production of ground-like finishes. You are welcome to inspect the machine under power on site to convince yourself of its condition.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition! Technical Data: >> Machine No.: 2801 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose to DIN 55027 >> Tailstock: MT2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting options: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece Röhm 3-jaw chuck 125 mm with 4 sets of jaws >> Collet device with collets from 2 mm to 12 mm in 1 mm increments, incl. draw tube >> Multifix size A quick-change toolpost with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Clamping tools Nodjv Tyzcspfx Af Iecl About the Machine: Offered is a Weiler Primus lead and feed screw bench lathe in excellent condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler operates quietly. The Primus comes from a state-owned facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be finished to a ground quality. You are welcome to inspect the machine under power on site and see its condition for yourself. (Base cabinet is included; it is not bolted to the machine.) Digital readout available at extra cost.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970, Machine No. M1012 >> Center height: 140 mm >> Distance between centers: 500 mm >> Spindle speed: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock Ncsdpfx Ajvv Etvjf Isl >> Tailstock: Morse taper 3 >> Feeds from 0.010 to 1.184 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Dimensions: length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> Collet chuck set with 32 collets (set incomplete) with mounting >> 1 three-jaw chuck with 1 set of jaws >> 1 four-jaw chuck with 1 set of jaws >> Multifix size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered is a used Weiler Matador VS-2 in fully functional condition. Take advantage of the opportunity to inspect this machine under power on site and verify its condition for yourself.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout by K&C, As New from Training Workshop – Excellent Condition!!! Technical Data: Ncodpfx Afswvuf Ts Isl >> Year of manufacture: approx. 2000 / Machine No.: D3F H1 010 >> Center height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, infinitely variable from 35–3000 rpm >> Quill stroke: 120 mm >> Tailstock taper: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required floor space (approx.): Length 1.6 x Depth 0.9 x Height 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> K&C 3-axis digital readout, new, 12 months manufacturer’s warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter, quick zeroing, counting direction switching, >> 1 pc. NEW 3-jaw chuck 160 mm, 2 sets of jaws >> Multifix B tool post with 2 holders >> Chip guard >> Coolant system About the Machine: For sale is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is, of course, fully functional. The bed ways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new 3-jaw chuck. You are welcome to inspect the machine under power on-site and see the condition for yourself.

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C (NEW) Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: - Machine No. 90-1495 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 - Feed rates from 0.015 to 0.46 mm/rev - Possible threads: Metric, Imperial, Module and Diametral Pitch - Metric thread pitches from 0.18 to 28 mm - Weight approx. 1100 kg - Spindle brake engageable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: Ncodpfsvambcsx Af Iel - 3-axis digital readout by K&C, new, with 12 months manufacturer warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving function, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal, - Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments - 160 mm 3-jaw chuck with two sets of jaws, NEW - Multifix quick change toolpost, size A, with 2 new tool holders - Bed stop - Electric chuck guard, NEW - LED machine lamp, NEW - Rear splash guard - Operating manual - Coolant system - Machine feet About the machine: Offered is a Weiler Condor B lead and feed screw lathe, geometrically overhauled and in as-new condition. The guideways have been reground or newly hand-scraped. Supplied with a certified inspection protocol. A very attractive machine with electronic spindle protection. The accessories — collets, chuck, and Multifix — are new. Spindles, nuts, bearings, belts, and wipers have been renewed. You are welcome to inspect this machine under power at our premises and see its condition for yourself.

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis Digital Readout K&C NEW. Refurbished with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 87 160 760 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose, DIN 55027 Size 5 with Bayonet Lock >> Tailstock Taper: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: Approx. 680 kg >> Spindle Brake, Switchable Nsdsvrdlcopfx Af Iocl >> Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories & Equipment: >> 3-axis Digital Readout by K&C, new, 12 months manufacturer warranty, with instruction manual Functions: mm/inch switching, ABS/INC coordinate mode, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switching >> New collet chuck system; NEW collets from 3 to 25 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating instructions, spare parts list (PDF) About the Machine: This listing is for a Weiler Praktikant 160 B engine and feed shaft lathe, refurbished to toolmaker accuracy and fully geometrically overhauled. Supplied with inspection protocol for new machine tolerances. For safety: electronic working spindle guard, lead and feed shaft covers, two emergency stops, and a braked motor. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site to satisfy yourself of its condition.

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Geometrically Overhauled with Inspection Protocol for Tolerances According to New Machine Standards Technical Data: >> Machine No. 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with Bayonet Lock >> Tailstock Morse Taper 3 >> Feeds from 0.015 to 0.46 mm/rev >> Threading Capabilities: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.18 to 28 mm >> Weight approx. 1,100 kg >> Spindle Brake Switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: Nedpfxowrm Dtj Af Ijcl >> New 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zero, direction of count switching >> New collet chuck setup, new collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 steel tool holders >> Bed stop >> Electric chuck guard NEW >> Rear splash guard >> Operating manual >> Coolant system >> Machine mounts About the machine: Offered is a Weiler Condor 81 lead and feed screw lathe in very good geometrically overhauled condition. The guideways have been newly ground and hand-scraped. Inspection carried out according to the test protocol. Accessories such as collets and chucks are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops—an absolutely like-new lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and see the condition for yourself.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Technical Specifications: >> Year of manufacture: 1986 >> Machine no.: 86-160-348 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: 8 steps, from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5 with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake can be engaged >> Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> Collet chuck system, collets as-new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet Nedpfxswthbie Af Ijcl >> Coolant system About the Machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe with toolmaker precision, in very good condition. The machine is fully operational. The Weiler has been completely disassembled and newly repainted in light grey. The slides all move very smoothly and evenly. The Weiler also runs quietly at high speeds. This newer generation of Weiler lathes is extremely user-friendly and allows production of ground-like surface finishes. You are welcome to inspect the machine under power on site and convince yourself of its condition.