Stovo Laikikliai pirkti naudotą (4 273)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base sections, 1,000 mm useful depth - 12 cantilever arms, each with 1,000 mm useful depth, standard version - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available and extensions possible at any time) - (*Larger quantities available: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms each with 1,000 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 boltable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total rack length: 4,000 mm - Fastening material included (without floor anchors) - Comes with assembly instructions and C4 load capacity labels according to DIN standards - Expert technical support by phone - Made in Germany Dedpfsmhhyaox Ac Deur - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical manner to enable easy unloading. If installed outdoors, load capacities are reduced due to wind and snow loads. The installation surface must be concrete, level, suitable for anchoring, and able to withstand the imposed loads. The client is responsible for verifying and ensuring ground condition, load-bearing capacity, and any necessary official permits. Rack uprights must be anchored to the floor on-site; wall anchoring is neither required nor recommended. According to trade association guidelines, the uprights of the rack should have a minimum overhang of 500 mm above the highest storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg Dsdjh Ek Daspfx Ac Deur - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: Duodpfx Aod Tqaloc Der - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. Dedpofdkb Usfx Ac Deur The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times Duedpfxefdkbhs Ac Djr - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice Dujdpfx Acjmhhf So Dor - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Bolted system in hot-dip galvanized version: Ex works price: Robust steel construction made from IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright fitted with 3 bolt-on cantilever arms, usable depth 1,200 mm, standard (= 4 levels) Dsdpfsmhhl Hsx Ac Deur Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Including mounting material (without floor anchors) Complete with assembly instructions and C4 load capacity signs according to DIN standard

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever racking system in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 4,200 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm bay distance (4,000 mm racking length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered, and extension is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Enzian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Per upright: 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per arm: 730 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - Supplied with assembly instructions and load capacity labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Local pickup available Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is well packaged for easy unloading. Delivery can take place approximately 1–2 weeks after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be made of concrete, level, suitable for doweling, and able to bear the applied loads. The floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional liability association guidelines, it is recommended that the uprights have at least 500 mm of clearance above the top storage level. Dsdpfemidyfex Ac Deur

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking Used: Hot-dip Galvanised Bolted System Scope of Delivery: - 4 double-sided uprights, height 3,500 mm, each with 1,200 mm base plates - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre-to-centre distance - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed Description: - Robust steel construction made of IPE sections - Surface of all components hot-dip galvanised - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, each with 1,200 mm depth, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. The material is properly packaged to enable easy unloading. Dsdpfxemkixwe Ac Djur When installed outdoors, load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, suitable for dowelling, and able to absorb the applied loads. Floor structure and load-bearing capacity, as well as any necessary official approvals, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. Dedpfjqt Dmyex Ac Djur When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: naujas, Tekančiojo gręžimo pajėgumas pliene St 12.03: 20 mm Gręžimo pajėgumas pliene St 60: 40 mm Trumpa verpstė MK 4 Verpstės eiga: 160 mm Svirtis: 300 mm Stulpo skersmuo: 145 mm Stalo paviršiaus naudojamas plotas: 615x430 mm T griovelių skaičius - plotis - atstumas: 2x14x224 mm Atstumas tarp verpstės ir stalo: 147/688 mm Padavimas: 0,1-0,2-0,3-0,4 mm/aps. Verpstės apsukos: 140-4000 aps./min. Bendras energijos poreikis: 4,0 kW Duodpfjyv Nxbjx Ac Djr Mašinos aukštis: 1885 mm Standartinė įranga: - Elektromagnetinė padavimo sankaba su apsauga nuo perkrovos ir elektriniu valdiklio kryžminiu jungikliu - Valdymo ir apšvietimo transformatorius - Užrakinamas pagrindinis jungiklis - Variklis su šilumine apsauga - Grybo formos (fiksuojamas) avarinio stabdymo mygtukas valdymo pulte - Sukimas į dešinę per kontaktorinę valdymo sistemą - Neribota sukimosi greičio reguliacija - Skaitmeninis apsukų indikatorius - Elektroninis sukimosi greičio valdymas - Apsaugos klasė IP 54 - Variklio izoliacijos klasė "F" - Verpstės apsauga su elektriniu saugikliu

Būklė: naujas, Gręžimo galia pliene: 32 mm Gręžimo eiga: 125 mm Trumpa griebtuvo kūgio tipas: MK 3 Iškyša: 210 mm Stalo naudojamas paviršius: 390x390 mm Stalo apkrova: 65 kg Dujdpfeyv Npgjx Ac Der Veleno sukimosi greitis: 150–2.500 sūkių/min Energijos poreikis: 16 A Bendra galia: 1,5 kW Įrenginio matmenys: 750x450x1745 mm Įrenginio svoris: apie 187 kg Standartinė komplektacija: - Bespirštė sukimosi greičio reguliacija - Aušinimo skysčio įranga įrengta staklių pagrinde - Mobilus LED staklių apšvietimas - Pasukamas darbo stalas su integruotu stakliniu spaustuvu kitoje pusėje; žandų plotis 120 mm - Maitinimo laidas su kištuku, tad įrenginys paruoštas naudojimui - Gręžimo stalas reguliuojamas krumpline pavara - Gylio ribotuvas su skale - Avarinio stabdymo mygtukas - Atitinka galiojančius CE reikalavimus

Būklė: geras (naudotas), Cantilever racking system OHRA, 3 m high Over 100 m available in stock, see pictures. Height: 3 m Arm length: 100 cm Load capacity per arm: 800 kg Span: 4.5 running meters, 4 uprights with arms Negotiable price: €2,360 (net) Offer includes: - 4 uprights with base, each 3 m high - 4 adjustable arms per upright, each 100 cm, load capacity 800 kg/arm Diagonal bracing, stiffeners, and spacers are included. Frame distance: 150 cm Load capacity per upright per side: 3,200 kg Heights of 2.5 m, 4 m, or 6 m available. Other configurations available on request: Always over 3,000 linear meters of pallet racking Duodpfxjcd Dwye Ac Der from various manufacturers in stock. Transport and assembly available on request. (Technical data, information, and prices subject to change and errors, as well as prior sale! See our terms and conditions; all prices exclude VAT, ex works.) Purchase / Sale We are constantly sourcing and offering numerous items from various sectors, - broom-clean clearances - business closures - Fast – flexible – efficient! We also vacate and/or dispose for insolvency administrators. Send us a few keywords; we will get back to you promptly. To visit our page, please click our logo!

Būklė: naudotas, Gamybos metai: 2021, only 24 operating hours – like new Base machine 1 pc Cutting Technology Meets the Future The CONTROL has always set its own standard – the premium class for vertical panel saws. However, this advantage is never static. We have developed the CONTROL into a premium-class vertical panel cutting center, with increased automation of the sawing process and additional equipment options. Above all, the 12" touchscreen controller and the new machine software offer significantly enhanced user convenience in every detail. Saw Frame • Machine manufactured to precision components to 1/100 mm tolerances • Solid, self-supporting, welded and torsion-resistant saw frame • Full-surface support wall made of birch plywood with integrated small parts support • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic recognition of the center support • Automatic roller locking during sawing Saw Beam • Sturdy, durable steel saw beam construction • Automatic saw beam locking with interface recognition Saw Unit • Play-free, smooth-running guides • Robust bearing of the motor carriage ensures high cutting accuracy • Powerful, high-torque 5.5 kW motor (7.5 HP) • Greater comfort thanks to largely automated operation • Laser-assisted horizontal cut display • Automatic motor carriage clamping • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for easy changeover to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Control • 12" touchscreen panel with optimal operator guidance • Multilingual operation • Tool database ensures high flexibility and absolute repeat accuracy • Fully automatic sawing process • Continuously adjustable feed rates 10–25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hour counter • Network connectivity Size Adjustment • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, Ergonomics • Typical STRIEBIG product design • Multiple award winner (e.g. Design Prize Switzerland) • Function- and operator-oriented ergonomics Installation • Wall or free-standing (optional) installation possible Note: Permitted ambient temperature: min. +5°C / max. +40°C Relative humidity: 19–95% Dujdoyyqz Sopfx Ac Djr If mains voltage fluctuations greater than +/-10% of rated voltage occur at the installation site, a voltage stabilizer must be installed. Type 5216 Cutting range 4300x2160/2016x80 mm 1 unit Cutting length 4,300 mm Vertical cutting height 2,160 mm Horizontal cutting height 2,016 mm Max. cutting depth 80 mm Min. cutting depth (automatic feed) 4 mm Min. cutting depth (manual feed) 2 mm For exact installation dimensions, please refer to the brochures or installation plans. ProLock Easy-Fix tool clamping system, 1 unit Electronic positioning system "EPS" – X, 1 unit (horizontal axis for vertical cuts) Paper holder, 1 unit Small parts support made of aluminum (2 pieces), 1 unit Set for free-standing installation (Type 5168, 5216, 5224, 6168, 6216, 6224), 1 unit Location: Customer

Būklė: naudotas, Sandėlio vieta: Tiekėjas Duodoynttfspfx Ac Dsr

Būklė: geras (naudotas), Stulpinė gręžimo staklės: WMW Saalfeld Tipas BK 25 Metai 1963 Tvirtinimas MK 4 Djdpoyx Uk Ujfx Ac Dour Gręžimo galia 32 mm Stalas 800 x 600 mm Automatinė pastūma

Būklė: geras (naudotas), CNC control, card insert, control cards, plug-in cards, printed circuit boards, control rack Dusdpfx Acord Admj Dsr -Manufacturer: Robosoft, control rack from HACO press brake model PPES 30135 -Type: PC 10-39 -Power supply card: 338-0180V2 -CPU card: 338-0159V2 -Power supply card: 338-0200V3 -Individual components: see photos -Price/Sale: complete set -Dimensions: 315/215/H210 mm -Weight: 5.1 kg

Būklė: naudotas, Gamybos metai: 2012, bendras aukštis: 1 450 mm, bendras ilgis: 1 200 mm, bendras plotis: 800 mm, Kuro tipas: Elektrinis Pavara: motorizuota Svoris be krovinio: 596 kg - Pagaminimo metai: 2012 - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Serijos numeris: ME000659 - Pavara: Elektrinė - Tipas: Priekaba - Transportavimo matmenys: 1200mm x 800mm x 1450mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 596kg - Transporto paketų skaičius [vnt.]: 1 Duodpjwtm H Refx Ac Djr Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Maržinės mokesčių sistemos taikymas: PVM atskaitomas verslui Pristatymas ir priėmimas įmokai galimi bet kada visiems pramonėje naudojamiems įrenginiams Tess van den Boom

Būklė: naudotas, - Dokumentacija prieinama: Ne - CE sertifikatas yra: Ne - Stovų skaičius [vnt.]: 15 - Sijų skaičius [vnt.]: 16 - Sijos ilgis [mm]: 1200 - Stovo aukštis [mm]: 3950 - Pado ilgis [mm]: 1500 - Atstumas tarp stovų [mm]: 1300 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumo apmokestinimas: PVM atskaitomas verslo subjektams Duedpfxowub H Ie Ac Djr Pristatymas ir sandorio galimybė bet kuriam pramonės srities įrenginiui visada įmanoma. Tess van den Boom

Būklė: naudotas, Pjovimo ilgis 5300 mm, pjovimo aukštis 2200 mm, variklis 5,5 kW, pjovimo gylis 80 mm, laisvai pastatomas. Sandėliavimo vieta: Tiekėjas Dedpfx Aceynbm He Djur

Būklė: naudotas, mašinos/transporto priemonės numeris: 300756, Funkcionalumas: visiškai funkcionalus, galia: 1,5 kW (2,04 AG), veleno tvirtinimas: MK 2, gręžimo gylis: 100 mm, bendras aukštis: 1 745 mm, gerklės gylis: 225 mm, stalo plotis: 450 mm, stalo ilgis: 315 mm, bendras svoris: 170 kg, paskutinio kapitalinio remonto metai: 2024, Siūlome šią naudotą MAXION Unimax 2 S kolonėlinę gręžimo staklę, pagaminimo metai nežinomi. Jeigu turite klausimų arba reikia daugiau informacijos, prašome parašyti mums žinutę arba paskambinti. Duodpfxeyzppko Ac Dor

Būklė: geras (naudotas), Mašinos duomenys: Atsargų numeris: 1022-0082 Įrenginio tipas: Įrankių laikiklis Gamintojas: WENDEL Valdymo būdas: konvencinė Sandėliavimo vieta: Monheim am Rhein Kilmės šalis: Pristatymo laikas: iš karto Transportavimo sąlygos: iš sandėlio, nemokamai iki sunkvežimio pakrovimo platformos Techniniai duomenys: Įrankio tvirtinimas: VDI 40 DIN 69880 Kiekis: 22 vnt. Papildoma informacija: Duedjyx A N Sjpfx Ac Der Įrankių laikiklių asortimentas. Būklė: gerai išlaikyti. Įrankio laikiklio dydis: VDI 40, DIN 69880 Naudota su CNC tekinimo staklėmis, Gildemeister CTX 500 E modeliu. Asortimento kiekiai: 1 vnt. radialinis varomas įrankio laikiklis 18 vnt. ašinis varomas įrankio laikiklis 3 vnt. standartinis įrankio laikiklis Parduodama tik komplektu!

Būklė: naudotas, Gamybos metai: 1995, Naudota mašina Metai: 1995 Įranga ir techniniai duomenys: Pjovimo ilgis: 5300 mm Pjovimo aukštis: 2200 mm Maks. ruošinio storis: 80 mm Variklis: 5,5 kW Suspausto oro jungtis: 6 bar, 50 NL/min Ištraukimo jungtis: 2 x 100 mm, 1200 m³/h Pneumatinė agregato fiksacija Pneumatinis agregato panardinimas Skaitmeninis horizontalus rodmuo Djdpfx Acjywptze Djur Prieinamumas: pagal susitarimą Vieta: Flörsheim

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Vienpusis poliravimo stovas, tipas 72711 (Metabo, IBS, IMM) - Iš viso yra 5 identiškos mašinos - Variklio galia 7,5 kW – 1500 aps./min - Įskaitant poliravimo apsauginį gaubtą - Poliravimo veleno skersmuo – 35 mm - Poliravimo veleno aukštis apie 900 mm Dedpfx Asx Iuvvjc Deur - Mašinos išardytos, išvalytos, nugruntuotos, perdažytos, su naujais velenų ir variklių guoliais bei naujais trapeciniais diržais - Iš viso yra 4 identiškos mašinos

Būklė: naudotas, mašinos/transporto priemonės numeris: 1231566, Grinding wheel diameter: 300 mm Grinding wheel width: 40 mm electrical connection: 380 V, 1.5 kW required space: 700 x 400 x 1150 mm Dujdpfx Ajbuaa Eec Djr