Spintu Iranga pirkti naudotą (22 185)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Borken
1 181 km
Pramoninė temperavimo krosnis / šildymo spinta
VötschVTL 200/250/225 250°C 11 m³
Skambinti
Būklė: labai geros būklės (naudotas), Vötsch
Vötsch Industrial Tempering Oven VTL 200/250/225
250°C 11.25 m³ 58 kW – Heating Cabinet
Description:
Lodpfx Asytrzfjkvohh
For sale is an industrial tempering oven / heating cabinet from Vötsch Industrietechnik GmbH.
This unit is ideally suited for industrial tempering, drying, and heat treatment processes.
The large usable chamber enables the simultaneous processing of large or multiple components.
The oven is controlled via a JUMO IMAGO 500 controller, allowing for precise temperature management and automated programs.
Typical application areas:
- Industrial production
- Plastics and metal processing
- Component drying
- Heat treatment
- Testing technology / material testing
- Laboratory and research applications
The system is robustly built to industrial standards and is designed for continuous operation.
Technical Specifications:
Manufacturer: Vötsch Industrietechnik GmbH
Model: VTL 200/250/225
Maximum temperature: 250 °C
Temperature safety class: TB class 1, TWB class 2
Interior chamber:
Usable volume: 11.25 m³
Internal dimensions: Width: 2000 mm, Height: 2500 mm, Depth: 2250 mm
External dimensions: Width: 2900 mm, Height: 3530 mm, Depth: 2700 mm
Load capacity:
Interior shell load capacity: 400 kg
Floor area load: 1000 kg
Weight
Net weight: 1850 kg
Electrical data:
Connection:
3/N/PE AC 400 V ±10 % / 50 Hz
Rated current: 90 A
Rated power: 54 kW
Connected load: 58 kW
Further data:
Minimum exhaust airflow: 600 m³/h
Reduced exhaust airflow: 150 m³/h
Purge time: 465 s
Total steam space: 14.9 m³
Sound pressure level: < 70 dB(A)
Temperature limiter shut-off temperature: 280 °C
Temperature selection limiter: 270 °C
Weight: 1850 kg
Condition: used
Scope of delivery: (See picture)
(Subject to changes and errors in technical data! All specifications are subject to confirmation.)
We would be pleased to answer further questions by phone.
Mažas skelbimas
Borken
1 181 km
Oro cirkuliacijos džiovinimo spinta iki 300°C, 53 litrai
BinderFD 53 Trockenofen Wärmeschrank
Skambinti
Būklė: labai geros būklės (naudotas), Binder FD 53 džiovinimo krosnis / šilumos spinta
Lhedpfxszcwxzo Akvoh
Gamintojas: Binder
Tipas: FD 53
Pagaminimo metai: 2014
Pagaminta Vokietijoje
Džiovinimo krosnis / šilumos spinta su priverstine oro cirkuliacija, skirta laboratorijoms, mokslinei veiklai, kokybės kontrolei, medžiagų bandymams ir pramoniniam naudojimui.
Techniniai duomenys
Vidinis tūris: 53 l
Temperatūros diapazonas: apie +5 °C virš aplinkos temperatūros iki 300 °C
Vidiniai matmenys (P x A x G): apie 400 x 400 x 340 mm
Išoriniai matmenys (P x A x G): apie 635 x 620 x 690 mm
Maksimali apkrova vienai lentynai: 15 kg
Didžiausia bendra apkrova: 40 kg
Tuščias svoris: apie 44 kg
Energijos tiekimas: 230 V
Dažnis: 50 / 60 Hz
Nominali srovė: 5,3 A
Nominali galia: 1,2 kW
Apsaugos klasė: IP20
Įranga
Priverstinės oro cirkuliacijos sistema
Skaitmeninis temperatūros indikatorius
Elektroninis temperatūros reguliavimas
Saugos temperatūros ribotuvas pagal DIN 12880
Nerūdijančio plieno vidus
Kelios lentynų padėtys
Tvirta laboratorinė konstrukcija
Patikra / Kalibracija
DGUV V3 patikra atlikta: 2023-07-28
Kalibracija atlikta: 2023-07-28
Patikros ir kalibracijos lipdukai yra ant įrenginio.
Būklė
Naudotas įrenginys.
Įrenginį galima įjungti, temperatūros indikatorius veikia.
Matomi amžiaus ir naudojimo žymės.
Išvaizdos būklė pagal nuotraukas.
Komplektacija: žiūrėti nuotraukas.
Nuotraukose matomas stalas nėra pardavimo dalis.
Galimas siuntimas.
Galimos klaidos ir pakeitimai.
Mažas skelbimas
Warszawa
378 km
Maišymo ir maišymo įranga
StephanUMC 12-F
Skambinti
Būklė: naudotas, Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, galia: 1,8 kW (2,45 AG), įvesties srovės tipas: trifazis, įėjimo įtampa: 380 V, sukimosi greitis (maks.): 2 800 aps./min, sukimosi greitis (min.): 150 aps./min, Siūlome šią naudotą Stephan UMC 12-F maišymo ir maišymo įrenginį, pagamintą 1989 m. Mašina veikianti ir paruošta darbui.
Lhjdsy Ry Ezopfx Akvsh
Mašinoje yra sugedęs sukamųjų apsukų valdymo mechanizmas (dažnio keitiklis), todėl apsukos nustatytos fiksuotai – 50%.
Mašinos tipas: UMC 12-F
Mašinos numeris: 714-27-101
Variklio tipas: FD112M10-
Variklio numeris: 4812222
Nominali įtampa: 380 V
Dažnis: 50 Hz
Variklio galia: 1,8 kW
Fazių skaičius: 3
Sūkių diapazonas: 150-2800 1/min
Apsaugos klasė: IP 44
Srovė: 4,8 A
Pagaminimo metai: 1989
Dėl klausimų ar papildomos informacijos prašome susisiekti žinute arba telefonu.

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Aalen
1 170 km
Mobilioji ištraukimo įranga / mobilus dulkių surinkėjas
FelderRL 160
Skambinti
Būklė: naudotas, Gamybos metai: 2007, galia: 3 kW (4,08 AG), įsiurbiamojo kolektoriaus skersmuo: 160 mm, filtravimo plotas: 10 m², bendras aukštis: 1 800 mm, bendras ilgis: 1 700 mm, bendras plotis: 800 mm, bendras svoris: 200 kg, Įranga: CE žymėjimas, Nr. 04529
Mobilus ištraukimo įrenginys / mobilus dulkių surinkėjas Felder RL 160
Lsdpfezcqxuex Akvjhh
Naudotas, pagamintas 2007 m., gera būklė, įrenginys iš mažos įmonės
Nominalus oro srautas apie 1750 m3/h
Mažiausias oro srautas 1448 m3/h
Didžiausias oro srautas 3250 m3/h
Vakumas įsiurbimo vamszdyje 1720 Pa
Nominalus vakumas 1120 Pa
Ištraukimo jungties diametras 160 mm
Variklis 3 kW
Likusių dulkių lygis H3, 0,1 mg/m3
Filtro plotas 10 m2
Konstrukcija B1, tinkama degių dulkių, priklausančių dulkių sprogumo klasėms St 1 ir St 2, surinkimui
Rankinis filtro regeneravimas
2 drožlių surinkimo konteineriai po 200 l
GS sertifikuotas
Atitinka CE reikalavimus
Transportavimo matmenys apie 1700 x 800 x 1800 mm (I x P x A)
Svoris apie 200 kg
Kad būtų išvengta galimų nesusipratimų, apžiūra vietoje galima ir rekomenduojama prieš susitariant
Parduodama esamos būklės
Techniniai duomenys, būklės aprašymas, pagaminimo metai ir komplektacija pagal gamintojo katalogą arba ankstesnio savininko duomenis, be garantijos
Pasiliekama teisė parduoti kitam asmeniui
Naudotoms mašinoms garantija netaikoma, galioja principas: „pirkta, kaip apžiūrėta“
Apmokėjimo sąlygos: Kainos be PVM, apmokėjimas prieš atsiėmimą arba siuntimą
Pristatymo sąlygos: iš sandėlio
Mažas skelbimas
Skarżysko-Kamienna
493 km
Miltelinio dažymo įranga
ROMER-malowanie elektrostatyczneKompleksowe lakiernie proszkowe
Skambinti
Gamybos metai: 2020, būklė: naujas, Transport systems
Depending on customer requirements, transport systems can either move along the floor or be suspended from rails.
- For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors).
- In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability.
- For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option.
All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders.
Lsdpfx Aefz Dubskvjhh
It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems.
Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations.
Use of photoelectric cells
Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings.
Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection.
By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.
Atraskite daugiau naudotų mašinų
Mažas skelbimas
Skarżysko-Kamienna
493 km
MILTELINIO DAŽYMO ĮRANGA
ROMER/ Electrostatic paintingSL
Skambinti
Būklė: naujas, Gamybos metai: 2025, Na zdjęciach przedstawiono piece do utwardzania, których cena może się różnić w zależności od rozmiaru, konfiguracji oraz opcji dodatkowych. 💡📏⚙️
W ROMER produkujemy zarówno modele standardowe, jak i w pełni indywidualnie dostosowane rozwiązania pod konkretne wymagania procesu. 🏭✅
Podaj nam wymiary elementu, wydajność linii, profil utwardzania oraz dostępną przestrzeń – a my zaproponujemy najlepszy układ i opcje realnie poprawiające wydajność pracy na co dzień. 🔥🎯
🧠📡 Sterowanie i monitoring
Aktualne sterowanie procesem: temperatura, czas, przepływ powietrza i tryby pracy – z alarmami oraz zapisanymi recepturami dla powtarzalnych cykli. 🔁✅
🔥🧩 Moduł grzewczy
Lsdpfeyg H Erjx Akvshh
Szybki nagrzew i stabilna temperatura dzięki wydajnym elementom grzejnym i efektywnemu transferowi energii. ⚡🌡️
🌀💨 Cyrkulacja powietrza
Jednolity przepływ powietrza zmniejsza różnice temperatur i zapewnia powtarzalną jakość powłoki. 🎯✅
🧱❄️ Izolacja i konstrukcja
Przemyślana budowa komory minimalizuje straty ciepła – szybciej osiągasz zadaną temperaturę i zużywasz mniej energii. ♻️📉
🛡️⚠️ Bezpieczeństwo i certyfikacja
Czujniki, blokady i logika zabezpieczeń zwiększają bezpieczeństwo i niezawodność działania. 🔒👷
⚡💰 Wysoka wydajność
Optymalny transfer ciepła i ograniczone straty to realne oszczędności eksploatacyjne. 📉🔥
⏰🤖 Automatyczny start
Programowalny harmonogram – automatyczne nagrzewanie przed zmianą usprawnia rozruch produkcji. ⏱️✅
🚪🔒 Samozatrzaskujące się drzwi + inteligentny komin
Zapobiega przypadkowemu otwarciu, komin uruchamia się tylko w razie potrzeby – bezpieczna obsługa. 🧯✅
🌿🔋 ECO mode
Tryb oszczędny podczas bezczynności – ograniczenie zużycia paliwa nawet o 20% (w zależności od procesu). 🌱📉
👀💡 Podgląd i oświetlenie
Możliwość kontroli bez otwierania drzwi – mniejsze spadki temperatury i łatwiejszy nadzór. ✨👁️
🛤️🔥 Szyny prowadzące + automatyczny kapturek
Osłona termiczna działa tylko podczas załadunku minimalizując straty, automatyczny wjazd szyn poprawia ergonomię i szybkość pracy. 🙌⚙️
🎛️🌡️ WIELOSTREFOWE GRZANIE
Oddzielne sterowanie strefami dla równomiernego utwardzania detali o różnych wymiarach i masie. 🧩✅
🧠♨️ System MTS
Elementy grzewcze montowane bez mostków cieplnych – wyższa efektywność i szybsze osiąganie żądanej temperatury. ⚡⏱️
2-w-1 🧱↔️🧱 Komora dzielona
Ruchoma przegroda tworząca dwie niezależne strefy – suszenie i utwardzanie w jednym piecu dla maksymalnej elastyczności. 🚀🔁
🎚️🌀 VFD wentylacja
Płynna regulacja obrotów wentylatora w zależności od warunków w komorze – lepsza kontrola i niższe zużycie energii elektrycznej. ⚙️💡
Mažas skelbimas
Skarżysko-Kamienna
493 km
Miltelinė įranga
ROMERPowder Coating Booth KPP
Skambinti
Būklė: naujas, Gamybos metai: 2026, 🏭 MILTELIO DAŽYMO KABINA KPP
Automatinis filtro valymas su reguliuojamu impulso laiku, taip pat rankinis režimas. 🧼⏱️🖲️
100 % poliesterio filtrai – plaunami, atsparūs vandeniui, ilgaamžiai. 🧵💧♻️
ROMER JET™ filtrų valymas – patentuotas didelio greičio oro impulsas galingam išvalymui. 💥💨🏅
Žemo triukšmo lygio aliumininiai ventiliatoriai (74-79 dB) – saugesnis, kibirkščių išvengiantis veikimas ir mažos energijos sąnaudos. 🔇⚡🛡️
Reguliuojamas oro srauto skydelis – antistatinė plokštė apsaugo filtrus ir pagerina ištrauką. 🌬️🛡️📈
Sandarus filtrų tvirtinimas – tarpinė + apkaba stipriam sandarumui ir patogiam aptarnavimui. 🔩🧷✅
Jutiklinio ekrano valdiklis – automatinis (pagal laiką), automatinis (užsikimšimo jutiklis), rankinis + filtro keitimo įspėjimai. 📲🔁⚠️
Pasirenkamas miltelių konteineris – atliekų surinkimui arba fluidizuota talpa tiesioginiam tiekimui dažymo pistoletui. 🧺💨🎯
Viršutinis traukiklis – juda sijas per kabiną, mažinant rankinį darbą. 🏗️➡️💪
Integruotas sijojimo įrenginys (su konteineriu) – švarūs grąžintini milteliai pakartotiniam naudojimui, EX zonos vibratoriaus sistema. 🧪♻️⚙️
Ljdpfxjfy T Tbo Akvohh
Sprogimui atspari konstrukcija – komponentai parinkti taip, kad būtų išvengta sprogstamųjų mišinių susidarymo. 🛡️💥✅
Mažas skelbimas
Skarżysko-Kamienna
493 km
Miltelinio dažymo įranga
ROMERSW- Elektrostatyczny system malowania
Skambinti
Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel
The large color touchscreen makes parameter entry even easier and more convenient.
5 programs with up to 50 steps each
You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes.
Gas and oil consumption information
Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process.
USB storage
Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros.
Storage of the last 20 firing processes
Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues.
New! Timer
It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins.
Made by professionals for professionals
Automatic smoke extraction
The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel.
Process duration timer
Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen.
Self-closing doors
Simply pull the door to open it. To close, just push the door and it will close automatically.
Lhedofz Apqjpfx Akveh
Extractor hood above the door (optional)
To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air.
Partition wall (optional)
The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls.
2 in 1 (optional)
It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.
Mažas skelbimas
Skarżysko-Kamienna
493 km
MILTELINIO DAŽYMO ĮRANGA
ROMER/ Electrostatic paintingCuring Oven SL Series
Skambinti
Būklė: naujas, Gamybos metai: 2025, Na zdjęciach przedstawiono piece do utwardzania, których cena może się różnić w zależności od rozmiaru, konfiguracji oraz opcji dodatkowych. 💡📏⚙️
W ROMER produkujemy zarówno modele standardowe, jak i w pełni indywidualnie dostosowane rozwiązania pod konkretne wymagania procesu. 🏭✅
Podaj nam wymiary elementu, wydajność linii, profil utwardzania oraz dostępną przestrzeń – a my zaproponujemy najlepszy układ i opcje realnie poprawiające wydajność pracy na co dzień. 🔥🎯
🧠📡 Sterowanie i monitoring
Aktualne sterowanie procesem: temperatura, czas, przepływ powietrza i tryby pracy – z alarmami oraz zapisanymi recepturami dla powtarzalnych cykli. 🔁✅
Lhedpefz U Nbefx Akvoh
🔥🧩 Moduł grzewczy
Szybki nagrzew i stabilna temperatura dzięki wydajnym elementom grzejnym i efektywnemu transferowi energii. ⚡🌡️
🌀💨 Cyrkulacja powietrza
Jednolity przepływ powietrza zmniejsza różnice temperatur i zapewnia powtarzalną jakość powłoki. 🎯✅
🧱❄️ Izolacja i konstrukcja
Przemyślana budowa komory minimalizuje straty ciepła – szybciej osiągasz zadaną temperaturę i zużywasz mniej energii. ♻️📉
🛡️⚠️ Bezpieczeństwo i certyfikacja
Czujniki, blokady i logika zabezpieczeń zwiększają bezpieczeństwo i niezawodność działania. 🔒👷
⚡💰 Wysoka wydajność
Optymalny transfer ciepła i ograniczone straty to realne oszczędności eksploatacyjne. 📉🔥
⏰🤖 Automatyczny start
Programowalny harmonogram – automatyczne nagrzewanie przed zmianą usprawnia rozruch produkcji. ⏱️✅
🚪🔒 Samozatrzaskujące się drzwi + inteligentny komin
Zapobiega przypadkowemu otwarciu, komin uruchamia się tylko w razie potrzeby – bezpieczna obsługa. 🧯✅
🌿🔋 ECO mode
Tryb oszczędny podczas bezczynności – ograniczenie zużycia paliwa nawet o 20% (w zależności od procesu). 🌱📉
👀💡 Podgląd i oświetlenie
Możliwość kontroli bez otwierania drzwi – mniejsze spadki temperatury i łatwiejszy nadzór. ✨👁️
🛤️🔥 Szyny prowadzące + automatyczny kapturek
Osłona termiczna działa tylko podczas załadunku minimalizując straty, automatyczny wjazd szyn poprawia ergonomię i szybkość pracy. 🙌⚙️
🎛️🌡️ WIELOSTREFOWE GRZANIE
Oddzielne sterowanie strefami dla równomiernego utwardzania detali o różnych wymiarach i masie. 🧩✅
🧠♨️ System MTS
Elementy grzewcze montowane bez mostków cieplnych – wyższa efektywność i szybsze osiąganie żądanej temperatury. ⚡⏱️
2-w-1 🧱↔️🧱 Komora dzielona
Ruchoma przegroda tworząca dwie niezależne strefy – suszenie i utwardzanie w jednym piecu dla maksymalnej elastyczności. 🚀🔁
🎚️🌀 VFD wentylacja
Płynna regulacja obrotów wentylatora w zależności od warunków w komorze – lepsza kontrola i niższe zużycie energii elektrycznej. ⚙️💡
Mažas skelbimas
Skarżysko-Kamienna
493 km
Miltelinio dažymo įranga
ROMERKompleksowe lakiernie proszkowe
Skambinti
Gamybos metai: 2020, būklė: naujas, Transport systems
Depending on customer requirements, transport systems can either move along the floor or be suspended from rails.
- For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors).
- In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability.
- For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option.
All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders.
It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems.
Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations.
Use of photoelectric cells
Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings.
Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection.
Lhodofz Dt Nepfx Akvoh
By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.
Mažas skelbimas
Skarżysko-Kamienna
493 km
Miltelinio dažymo įranga
ROMER /Automatyczna liniaAutomat
Skambinti
Gamybos metai: 2020, būklė: naujas, Transport systems
Depending on customer requirements, transport systems can either move along the floor or be suspended from rails.
- For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors).
- In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability.
- For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option.
All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders.
It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems.
Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations.
Use of photoelectric cells
Lsdpefz I D Djfx Akvshh
Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings.
Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection.
By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.
Mažas skelbimas
Skarżysko-Kamienna
493 km
Miltelinio dažymo įranga
ROMERKompleksowe lakiernie proszkowe
Skambinti
Gamybos metai: 2020, būklė: naujas, Transport systems
Ljdpefz I Edjfx Akvehh
Depending on customer requirements, transport systems can either move along the floor or be suspended from rails.
- For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors).
- In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability.
- For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option.
All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders.
It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems.
Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations.
Use of photoelectric cells
Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings.
Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection.
By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.
Mažas skelbimas
Skarżysko-Kamienna
493 km
Miltelinio dažymo įranga
ROMERMalowanie elektrostatyczne
Skambinti
Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel
The large color touchscreen makes parameter entry even easier and more convenient.
5 programs with up to 50 steps each
You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes.
Gas and oil consumption information
Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process.
USB storage
Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros.
Storage of the last 20 firing processes
Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues.
New! Timer
It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins.
Made by professionals for professionals
Automatic smoke extraction
The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel.
Process duration timer
Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen.
Self-closing doors
Simply pull the door to open it. To close, just push the door and it will close automatically.
Extractor hood above the door (optional)
To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air.
Partition wall (optional)
Lodpfx Akjfzkrnsvohh
The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls.
2 in 1 (optional)
It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.
Mažas skelbimas
Skarżysko-Kamienna
493 km
MILTELINIO DAŽYMO ĮRANGA
ROMER/ Electrostatic paintingSL
Skambinti
Būklė: naujas, Gamybos metai: 2025, Na zdjęciach przedstawiono piece do utwardzania, których cena może się różnić w zależności od rozmiaru, konfiguracji oraz opcji dodatkowych. 💡📏⚙️
W ROMER produkujemy zarówno modele standardowe, jak i w pełni indywidualnie dostosowane rozwiązania pod konkretne wymagania procesu. 🏭✅
Podaj nam wymiary elementu, wydajność linii, profil utwardzania oraz dostępną przestrzeń – a my zaproponujemy najlepszy układ i opcje realnie poprawiające wydajność pracy na co dzień. 🔥🎯
🧠📡 Sterowanie i monitoring
Aktualne sterowanie procesem: temperatura, czas, przepływ powietrza i tryby pracy – z alarmami oraz zapisanymi recepturami dla powtarzalnych cykli. 🔁✅
🔥🧩 Moduł grzewczy
Szybki nagrzew i stabilna temperatura dzięki wydajnym elementom grzejnym i efektywnemu transferowi energii. ⚡🌡️
🌀💨 Cyrkulacja powietrza
Jednolity przepływ powietrza zmniejsza różnice temperatur i zapewnia powtarzalną jakość powłoki. 🎯✅
🧱❄️ Izolacja i konstrukcja
Przemyślana budowa komory minimalizuje straty ciepła – szybciej osiągasz zadaną temperaturę i zużywasz mniej energii. ♻️📉
Lodpfx Akeflk Awovehh
🛡️⚠️ Bezpieczeństwo i certyfikacja
Czujniki, blokady i logika zabezpieczeń zwiększają bezpieczeństwo i niezawodność działania. 🔒👷
⚡💰 Wysoka wydajność
Optymalny transfer ciepła i ograniczone straty to realne oszczędności eksploatacyjne. 📉🔥
⏰🤖 Automatyczny start
Programowalny harmonogram – automatyczne nagrzewanie przed zmianą usprawnia rozruch produkcji. ⏱️✅
🚪🔒 Samozatrzaskujące się drzwi + inteligentny komin
Zapobiega przypadkowemu otwarciu, komin uruchamia się tylko w razie potrzeby – bezpieczna obsługa. 🧯✅
🌿🔋 ECO mode
Tryb oszczędny podczas bezczynności – ograniczenie zużycia paliwa nawet o 20% (w zależności od procesu). 🌱📉
👀💡 Podgląd i oświetlenie
Możliwość kontroli bez otwierania drzwi – mniejsze spadki temperatury i łatwiejszy nadzór. ✨👁️
🛤️🔥 Szyny prowadzące + automatyczny kapturek
Osłona termiczna działa tylko podczas załadunku minimalizując straty, automatyczny wjazd szyn poprawia ergonomię i szybkość pracy. 🙌⚙️
🎛️🌡️ WIELOSTREFOWE GRZANIE
Oddzielne sterowanie strefami dla równomiernego utwardzania detali o różnych wymiarach i masie. 🧩✅
🧠♨️ System MTS
Elementy grzewcze montowane bez mostków cieplnych – wyższa efektywność i szybsze osiąganie żądanej temperatury. ⚡⏱️
2-w-1 🧱↔️🧱 Komora dzielona
Ruchoma przegroda tworząca dwie niezależne strefy – suszenie i utwardzanie w jednym piecu dla maksymalnej elastyczności. 🚀🔁
🎚️🌀 VFD wentylacja
Płynna regulacja obrotów wentylatora w zależności od warunków w komorze – lepsza kontrola i niższe zużycie energii elektrycznej. ⚙️💡
Mažas skelbimas
Skarżysko-Kamienna
493 km
Miltelinio dažymo įranga
ROMER /Automatyczna liniaAutomat
Skambinti
Gamybos metai: 2020, būklė: naujas, Transport systems
Depending on customer requirements, transport systems can either move along the floor or be suspended from rails.
- For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors).
- In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability.
Lhedpfoflmdwjx Akvoh
- For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option.
All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders.
It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems.
Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations.
Use of photoelectric cells
Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings.
Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection.
By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.
Mažas skelbimas
Skarżysko-Kamienna
493 km
Miltelinio dažymo įranga
ROMERKompleksowe lakiernie proszkowe
Skambinti
Gamybos metai: 2020, būklė: naujas, Transport systems
Depending on customer requirements, transport systems can either move along the floor or be suspended from rails.
- For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors).
- In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability.
Ljdpofz Nb Tefx Akvshh
- For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option.
All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders.
It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems.
Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations.
Use of photoelectric cells
Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings.
Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection.
By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.
Mažas skelbimas
Skarżysko-Kamienna
493 km
Miltelių dengimo įranga, OVEN
ROMERKompleksowe lakiernie proszkowe
Skambinti
Gamybos metai: 2020, būklė: naujas, Transport systems
Depending on customer requirements, transport systems can either move along the floor or be suspended from rails.
Lsdjfz U S Espfx Akvjhh
- For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors).
- In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability.
- For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option.
All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders.
It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems.
Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations.
Use of photoelectric cells
Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings.
Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection.
By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.
Mažas skelbimas
Skarżysko-Kamienna
493 km
Miltelinio dažymo įranga
ROMER/ Electrostatic paintingSLS
Skambinti
Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel
The large color touchscreen makes parameter entry even easier and more convenient.
5 programs with up to 50 steps each
You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes.
Gas and oil consumption information
Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process.
USB storage
Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros.
Storage of the last 20 firing processes
Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues.
New! Timer
It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins.
Made by professionals for professionals
Automatic smoke extraction
The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel.
Process duration timer
Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen.
Self-closing doors
Lsdsfz U Tiepfx Akvohh
Simply pull the door to open it. To close, just push the door and it will close automatically.
Extractor hood above the door (optional)
To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air.
Partition wall (optional)
The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls.
2 in 1 (optional)
It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.
Mažas skelbimas
Skarżysko-Kamienna
493 km
MILTELINIO DAŽYMO ĮRANGA
ROMER/ Electrostatic paintingSL
Skambinti
Būklė: naujas, Gamybos metai: 2025, Na zdjęciach przedstawiono piece do utwardzania, których cena może się różnić w zależności od rozmiaru, konfiguracji oraz opcji dodatkowych. 💡📏⚙️
W ROMER produkujemy zarówno modele standardowe, jak i w pełni indywidualnie dostosowane rozwiązania pod konkretne wymagania procesu. 🏭✅
Podaj nam wymiary elementu, wydajność linii, profil utwardzania oraz dostępną przestrzeń – a my zaproponujemy najlepszy układ i opcje realnie poprawiające wydajność pracy na co dzień. 🔥🎯
🧠📡 Sterowanie i monitoring
Lodsyg H Dhepfx Akvjhh
Aktualne sterowanie procesem: temperatura, czas, przepływ powietrza i tryby pracy – z alarmami oraz zapisanymi recepturami dla powtarzalnych cykli. 🔁✅
🔥🧩 Moduł grzewczy
Szybki nagrzew i stabilna temperatura dzięki wydajnym elementom grzejnym i efektywnemu transferowi energii. ⚡🌡️
🌀💨 Cyrkulacja powietrza
Jednolity przepływ powietrza zmniejsza różnice temperatur i zapewnia powtarzalną jakość powłoki. 🎯✅
🧱❄️ Izolacja i konstrukcja
Przemyślana budowa komory minimalizuje straty ciepła – szybciej osiągasz zadaną temperaturę i zużywasz mniej energii. ♻️📉
🛡️⚠️ Bezpieczeństwo i certyfikacja
Czujniki, blokady i logika zabezpieczeń zwiększają bezpieczeństwo i niezawodność działania. 🔒👷
⚡💰 Wysoka wydajność
Optymalny transfer ciepła i ograniczone straty to realne oszczędności eksploatacyjne. 📉🔥
⏰🤖 Automatyczny start
Programowalny harmonogram – automatyczne nagrzewanie przed zmianą usprawnia rozruch produkcji. ⏱️✅
🚪🔒 Samozatrzaskujące się drzwi + inteligentny komin
Zapobiega przypadkowemu otwarciu, komin uruchamia się tylko w razie potrzeby – bezpieczna obsługa. 🧯✅
🌿🔋 ECO mode
Tryb oszczędny podczas bezczynności – ograniczenie zużycia paliwa nawet o 20% (w zależności od procesu). 🌱📉
👀💡 Podgląd i oświetlenie
Możliwość kontroli bez otwierania drzwi – mniejsze spadki temperatury i łatwiejszy nadzór. ✨👁️
🛤️🔥 Szyny prowadzące + automatyczny kapturek
Osłona termiczna działa tylko podczas załadunku minimalizując straty, automatyczny wjazd szyn poprawia ergonomię i szybkość pracy. 🙌⚙️
🎛️🌡️ WIELOSTREFOWE GRZANIE
Oddzielne sterowanie strefami dla równomiernego utwardzania detali o różnych wymiarach i masie. 🧩✅
🧠♨️ System MTS
Elementy grzewcze montowane bez mostków cieplnych – wyższa efektywność i szybsze osiąganie żądanej temperatury. ⚡⏱️
2-w-1 🧱↔️🧱 Komora dzielona
Ruchoma przegroda tworząca dwie niezależne strefy – suszenie i utwardzanie w jednym piecu dla maksymalnej elastyczności. 🚀🔁
🎚️🌀 VFD wentylacja
Płynna regulacja obrotów wentylatora w zależności od warunków w komorze – lepsza kontrola i niższe zużycie energii elektrycznej. ⚙️💡
Mažas skelbimas
Tönisvorst
1 231 km
Optinė įranga
HeidenhainOZA II -02-6
Skambinti
Būklė: naudotas, Optical device
Manufacturer: Heidenhain
Ledpfocifpmex Akvshh
Type: OZA II 02 - 6
Device number: 2739
Mounting distance: 14.30
Mažas skelbimas
Ennepetal
1 178 km
Matavimo įranga
HEIDENHAINLS 303 - Glasmaßstab
Skambinti
Būklė: naudotas, LS 303 - Stiklinis mastelis su skaitymo galvute
Ilgis: ML 920 mm
Lhjdpfx Akozcq Nmoveh
HEIDENHAIN LS 303
ID 22897526
SN: 1769976F
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Ennepetal
1 178 km
Matavimo įranga
HEIDENHAINLS 704 C - Glasmaßstab
Skambinti
Būklė: naudotas, LS 403 C – stiklinė matavimo skalė
Lodpfx Akjzcq Ivovehh
Ilgis: ML 620 mm
HEIDENHAIN LS 704 C
ID 23713402
SN: 4514662K
Mažas skelbimas
Ennepetal
1 178 km
Matavimo įranga
HEIDENHAINLS 403 C - Glasmaßstab
Skambinti
Būklė: naudotas, LS 403 C – stiklinė matavimo liniuotė
Ilgis: ML 920 mm
HEIDENHAIN LS 403 C
ID 23319137
Lhedpjzcq Ipjfx Akvjh
SN: 4506726 P
Mažas skelbimas
Ennepetal
1 178 km
Matavimo įranga
HEIDENHAINLS 603 - Glasmaßstab
Skambinti
Būklė: naudotas, LS 603 – stiklinis liniuotė su skaitymo galvute
Ilgis: ML 820 mm
HEIDENHAIN LS 603
Lhedpfozcq E Iox Akveh
ID 22852924
Serijos numeris: 1877790 A
Mažas skelbimas
Ennepetal
1 178 km
Matavimo įranga
PREISSERDigitales Höhenmessgerät 0-100
Skambinti
Būklė: naudotas, Matavimo diapazonas mm: 0 - 1000 mm
Nuskaitymas mm: 0,01
Lodpfx Akezcq D Djvehh
Aukščio matavimo prietaisas
Palengviname jums paiešką: "spintu iranga"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Spintu Iranga (22 185)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
































































































































































