Scm Si 12 Sw pirkti naudotą (575)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AB141760, pjovimo plotis (maks.): 1 500 mm, pjovimo plotis ties tiesiniu vedliu: 1 500 mm, galia: 7,5 kW (10,20 AG), stalo ilgis: 3 200 mm, Įranga: dozatorius, SCM panel saw, model SI 400 E Connection voltage: 380V Main motor: 7.5 kW Scoring motor: 0.75 kW Sliding table length: 3,200 mm Itsdpfx Abotwp Epekor Cutting width: 1,500 mm Table extension: 840 x 320 mm Parallelogram guard with wide and narrow hood Scoring unit manual adjustment Electric height adjustment Electric tilt with Siko display Extraction ports: 1 x 100 mm, 1 x 120 mm

Sąlyga: naujas, Standard Equipment and Accessories - 10-year warranty on the saw carriage guide system - Saw carriage with anodised aluminium profile, guideways made from hardened, ground, and roll-formed steel rails - Saw carriage length: 3200 mm - "READY" electronic control, 2-axis control (3rd axis optional) with: - Height adjustment and tilt of the saw unit (parallel fence control optional) - Tool data management with automatic cutting height correction according to the saw blade tilt angle - Manual, semi-automatic, and automatic modes with up to 99 programmable work routines - Additional functions: calculator and operating hours counter - Squaring frame for quick positioning of the fence during mitre cuts - Outfeed table extensions - Cutting width at parallel fence: 1270 mm - 2-axis control with 99 programs Motor 7kW 50Hz (8kW 60Hz) - Motor with direct start via push buttons - Three main saw blade speeds - Scoring unit with independent motorisation, externally adjustable, stops for easy blade positioning Safety/Protection Ijdpfevxr Skox Abkjtr - Emergency stop button at the front - Emergency stop button located at the parallel fence (CE version) - Thermal overload protection - Saw blade pendulum guard (CE version) with integrated extraction, extraction nozzle diameter 80 mm - Saw blade pendulum guard with integrated extraction, extraction nozzle 80 mm diameter - Automatic main saw blade motor brake (CE version) - Lockable main switch - 110 V auxiliary circuit - EC Declaration of Conformity (CE version) Technical Specifications - Max. cutting height at 90° (mm): 140 with 400 mm blade - Max. cutting height at 45° (mm): 97 with 400 mm blade - Saw blade tilt (degrees): 45 - Saw blade assembly lift/tilt: programmed - Saw blade speed (RPM): 3000 / 4000 / 5000 - Scoring blade speed (RPM): 8500 - Main motor power (S6 -40%) kW (HP) 50 Hz: 7 (9.5) - Scoring unit power (S6 -40%) kW (HP) 50 Hz: 1.3 (1.7) Format cutting: - with carriage 1600 (mm): n/a - with carriage 3200 (mm): 3200 x 3200 mm Rip fence cutting width (mm): 1270 Extraction port diameters: - On base frame (mm): 120 - On blade guard (mm): 80 - On riving knife (mm): n/a Net weight of base machine (kg): 1050 109999 Version in accordance with safety regulations R10078 nova si 400ep CE version 930731 Voltage 400 EU 931201 Frequency 50 Hz 570343 Digital readout for parallel fence Complete with: - Digital display and magnetic tape 570133 Motor 9kW 50Hz (11kW 60Hz) with automatic star-delta switch kW 9 HP12 50Hz (kW11 HP15 60Hz) 083202 Machine base 109993 MACHINE LANGUAGE: German

Sąlyga: naudotas, Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, GABBIANI MACCHINE AXIOMA 125 – FULLY FUNCTIONAL – GA1/002132 YEAR: 2003 MAXIMUM SAW BLADE DIAMETER: 420 mm MINIMUM DIAMETER: 300 mm, BORE DIAMETER: 80 mm SPEED: 3500 RPM Isdpfx Abewzbf Rskotr SCORING BLADE DIAMETER: 200 mm BORE DIAMETER: 80 mm SPEED: 430 RPM

Sąlyga: naujas, Gamybos metai: 2025, Spindle Moulder minimax twf 55 es M 3 UP Professional trade machine featuring motorised height and tilt adjustment of the spindle, four speeds, and electronic control Article number 5502266 Brand Holzkraft / SCM EQUIPMENT Features Aluminium sliding carriage ✔ Handle on sliding carriage ✔ Fencing system FLEX ONE: heavy-duty professional version, automatic adjustment of the entire fence based on tool diameter, manual depth of cut adjustment, swing-away mechanism, aluminium fence jaws with connecting rails Spindle height adjustment motorised Telescopic mitre fence with two fold-away stops Spindle tilt adjustment motorised Extension table ✔ Control system Ready 3: programmed movement of the spindle unit on two axes, automatic adjustment of the entire fence according to tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece safety guard ✔ Position of control elements Operator panel at eye level, swivelling Excenter clamp TECHNICAL DATA Dimensions and Weight Length (product) approx. 1200 mm Net weight approx. 510 kg Width/Depth (product) approx. 2000 mm Extraction Connection Extraction port diameter 2 x 120 mm Working Table Working table length 1200 mm Sliding carriage length 1200 mm Working table width 530 mm Sliding carriage width 360 mm Table height 900 mm Sliding carriage height 142 mm Installation Information Space requirement length 2800 mm Machine body width/depth 846 mm Space requirement width/depth 2910 mm Working area length 1600 mm Space requirement explanation Dimensions include maximum traverse paths or usable lengths. Working area width/depth 2300 mm Machine body length 1200 mm Working area explanation Add the stated dimensions to the required space to get the recommended free installation area for the machine. Electrical Data Connection voltage 400V Drive motor power 5.0 kW Mains frequency 50 Hz Spindle Iedpfx Abshp Rc Iokstr Spindle tilt 0 to -45° Spindle speed display On control panel display Spindle usable length 125 mm Spindle shaft diameter 30 mm Spindle rotation speeds 3500/6000/8000/10000 rpm Maximum Cutter Diameters Max. cutter diameter 240 mm Max. profile mill diameter 240 mm Max. retractable cutter diameter 230 mm

Sąlyga: naudotas, Techniniai duomenys: Didžiausias pjūklo diskos skersmuo: 400 mm Mažiausias pjūklo diskos skersmuo: 250 mm Pjūklo veleno skersmuo: 30 mm Priešpjūvis Ijdpfjxzq U Sox Abketr Rankinis pjūklo aukščio reguliavimas Pjūklo pasvirimas nuo 0° iki 45° Rankinis pjūklo pasvirimo kampo reguliavimas Vežimėlio ilgis: 3300 mm Darbinis stalas: 1200x700 mm Stalo aukštis: 840 mm Stalo prailginimai: 510 mm Nusiurbimo anga, skersmuo: 110 mm Tvorelė: 900 mm Liniuotė ilgis: 2200 mm Maitinimas: 400 V Pagrindinio variklio galia: 4 kW Bendri matmenys: Ilgis: 3300 mm Plotis: 3500 mm Aukštis: 845 mm

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, mašinos/transporto priemonės numeris: AE/21582,

Sąlyga: labai geros būklės (naudotas), SCM Sintex keturių pusių obliavimo staklės Itsdpfxex E R Hxs Abker Maksimalūs obliavimo matmenys: 18 cm x 12 cm. Staklės komplektuojamos su pilnu obliavimo peilių rinkiniu ir išankstinio pjovimo įrenginiu. Elektrinis obliavimo aukščio reguliavimas, pirmasis viršutinis padavimo ritinys yra priešais apatinį obliavimo peilį, padavimas yra dviem greičiais. Vertikalios ašys varomos atskirais 7,5 kW varikliais. Staklės importuotos iš Italijos, labai geros būklės. Yra 2 vnt.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping tongs: 8 pcs. Saw carriage height adjustment on THK linear guides Pressure beam with slots (through-feed) Side aligner Iedpohvan Ijfx Abkjtr Pneumatic quick-change saw blade system Extraction port diameter: 1 x 120 mm & 1 x 150 mm Machine dimensions (L x W): 5,700 x 6,000 mm Weight: approx. 2,500 kg INVERTER NEW Notice for used machinery: • Technical specifications and prior sale subject to change. • All prices are ex-works, loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect machines at our site. • Special agreements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)

Sąlyga: labai geros būklės (naudotas), Four-sided planer SCM Sintex NTE Maximum planing width: 180 mm Maximum planing height: 105 mm 4 spindles Isdpsvzr Drofx Abkjtr Bottom + top: 7.5 kW each Right + left: 7.5 kW each Electric adjustment of height and width Worktable lubrication pump Complete set of cutterheads Spindle speed: 6,000 rpm Spindle bore diameter: 35 mm Weight: 900 kg European CE certificate Technical documentation Condition: Very good

Sąlyga: naudotas, Gamybos metai: 2008, Matmenys (I x P x A): 196 x 125 x 14 cm Ketursienis oblius SCM Sintex NT Pagaminimo metai: 2008 380V 4 velenai Apatinis/viršutinis velenas 7,5 kW Kairysis/dešinysis velenas 7,5 kW Min./maks. darbinis aukštis 6-105 mm Min./maks. darbinis plotis 23-180 mm Minimali ruošinio ilgis 300 mm Padavimo greitis 6-12 m/min Įvado stalas 2300 mm Veleno skersmuo 35 mm Bendri matmenys 3400x980x1600 mm (I x P x A), svoris 1000 kg - Pagaminimo metai: 2008 - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra - Transportavimo matmenys: 1960 mm x 1250 mm x 140 mm (i x p x a) - Transporto paketų skaičius: 1 vnt. Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM gali susigrąžinti įmonės Itjdowng U Rjpfx Abkor Pristatymas ir keitimas bet kuriuo metu galimi visai pramonės įrangai Yorick Diebels

Sąlyga: naudotas, Gamybos metai: 2011, • Working area: 2,550 x 1,067 mm • X-Y travel path: 2,980 x 1,450 mm • Z-axis stroke length: 150 mm • Clearance height: 120 mm Drilling Unit F14: • Drilling head with 8 + 6 spindles • 5 individually selectable vertical spindles in X • 3 individually selectable vertical spindles in Y • 4 horizontal spindles in X (2+2) • 2 horizontal spindles in Y (1+1) • Speed: 4,000 rpm (6,000 rpm optional) • Power: 2.2 kW • Grid: 32 mm • Drill holder: M10 with 11 mm locating diameter • Pneumatic pre-stroke: 60 mm Grooving saw unit in X: • Integrated in the drilling head • Grooving saw blade diameter up to max. 120 mm Main milling unit: • Tool holder: HSK 63F • Speed: 1,500 – 24,000 rpm, infinitely variable via inverter • Motor power: 6.6 kW (9 HP) from 12,000 rpm (S1) • Motor power: 7.5 kW (10 HP) from 12,000 rpm (S6) • Right/left rotation • Ceramic bearings • Prepared for use with angle heads Tool changer TR10: Automatic side tool changer for 10 tools. • Number of tool positions: 10 • Max. tool diameter: 120 mm • Max. weight per tool: 4.5 kg • Max. total tool weight: 28 kg A central extraction nozzle combines all machining units into a single connection with D = 200 mm, reducing the required extraction capacity to approx. 3,200 m³/h. TVF worktable: The worktable is designed to guarantee maximum freedom of movement for the operator. The vacuum quick-clamping system offers maximum flexibility for precise positioning and optimal holding of workpieces. • 4 TVF supports L = 1,100 mm, infinitely adjustable in X • 12 TVF vacuum cups 120 x 120 mm, infinitely adjustable in Y • 2 stops in X (1 left / 1 right) • 1 stop per support in Y (total 4 pcs.) • The retractable reference stops are CNC-controlled Automatic central lubrication: The correct amount of lubricating grease is distributed via an electronic CNC control unit (X, Y, Z axes) Vacuum system (base machine): • Vacuum pump: 90 m³/h • Power: 2.2 kW • Max. vacuum (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - DXF file import - ASCII file import - User interface in the operator's native language Safety devices with bumpers Machine technical data: • Total connected load max.: 18 kW • Recommended circuit breaker: 64 A • Supply: 400 V 50-60 Hz • Compressed air: 6-7 bar • System pressure (recommended): 8 bar • Compressed air consumption: 200 Nl/min • Central extraction nozzle diameter: 200 mm • Extraction speed: 30 m/sec • Air consumption (central extraction): 3,200 m³/h • Vacuum: 3,000 Pascal Itjdpfxoxy Ndie Abkor • Weight: approx. 2,500 kg Remote control of machine functions 6 TVF supports L = 1,100 mm and 18 vacuum cups 120 x 120 mm Cross laser for vacuum cup positioning Two cross lasers mounted on the unit carrier enable easy positioning of the vacuum cups. Location: Nattheim

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2003, mašinos/transporto priemonės numeris: AE/024990,

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Apatinio veleno frezavimo staklės SCM T120C su vežimėliu Specifikacija: • būklė – naudota, po pilnos apžiūros • gamintojas – SCM • modelis – T120C • veleno skersmuo 35 mm (galimybė pakeisti į 30 mm – papildomai 1500 PLN) • variklio galia 4 kW • variklio paleidimas trikampis-žvaigždė • sukimosi kryptys – kairė/dešinė • 4 reguliuojami diržo greičiai: 2,9/4,4/6/7,2 tūkst. aps./min • rankinis aukščio reguliavimas • kojinis stabdis ir veleno užraktas • išilginis stalas, tinka taip pat dygiavimui, ilgis 105 cm • originali dažyta danga • matmenys 100 x 110 x 110 cm (ilgis x plotis x aukštis) Iodpfx Ajwthmxsbkjtr Papildoma informacija: • labai gera gamyklinė techninė ir vizualinė būklė • pateiktos nuotraukos atspindi tikrąją parduodamo daikto būklę • galimybė įjungti ir patikrinti įrenginį vietoje.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, SCM Linvicilbe SI3 formatinė diskinė pjovimo staklės Tipas: SI 3 Pagaminimo metai: 2018 Valdymas: 3 ašių Aliumininio stalo ilgis: 3.200 mm Pjovimo plotis dešinėje nuo disko: 1.500 mm Variklio galia: 7 kW (minimaliai) Išankstinio pjovimo diskas Pjūklo disko diametras: 400 mm Pjovimo aukštis: 140 mm Itedpfxox Dbi Eo Abker Jutiklinis ekranas su valdymu: Automatinis aukščio reguliavimas Automatinis pasvirimo reguliavimas Automatinis lygiagretus atmušėjas

Sąlyga: naujas, Gamybos metai: 2025, FS 41 Classic Tersa – Surface & Thickness Planer with TERSA Quick-Change Knife System Features: - Equipped with TERSA cutterhead for fast, tool-free knife changes within seconds - TERSA knife system ensures particularly quiet operation - Helically grooved steel infeed roller for consistent and uniform material feed - Extra-long, one-piece surfacing tables allow for easy straightening of workpieces - Large, robust fence remains in position when opening surface tables - Surface tables open to the rear for ergonomic access - High machine weight ensures maximum precision and vibration-free operation - Powerful industrial-grade motor - Heavy-duty steel and cast iron construction Model: FS 41 Classic Tersa Article No.: 5503414 Technical Data --- Surfacing (Jointer) Specifications --- Total table length: 1800 mm Infeed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. depth of cut: 4 mm --- Thicknessing Specifications --- Thickness table dimensions: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min. Cutterhead diameter/knives: 72 mm / 3 pcs. Cutterhead speed: 5200 rpm Motor: 400V/50Hz/S6 40% power cycle, 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg TERSA Cutterhead - No adjustment or screwing required - Knife changes in seconds Ijdpfx Aocnxayebketr - Self-locking mechanism - Exceptionally quiet operation Cutter Block - Heavy-duty anti-kickback devices prevent material kickback - Tersa 3-knife cutterhead delivers optimal planing results Material Feed - Helically grooved steel feed rollers for constant and uniform wood feed without marking the material - 13 teeth simultaneously engage the workpiece for powerful feed - Wear-free compared to rubber feed rollers Dust Extraction Connection - Both surfacing and thicknessing extraction ports are aligned in the same direction - Hose connection is accessible from one side only - No hose routing required around the machine

Sąlyga: naudotas, Keturių pusių obliavimo staklės SCM Sintex 380V 4 velenai Apatinis/viršutinis velenas 7,5kW Kairysis/dešinysis velenas 7,5kW Didžiausias darbinis aukštis 105 mm Didžiausias darbinis plotis 180 mm Įrengimo stalas 2300 mm Veleno skersmuo 40 mm Bendri matmenys 3400x980x1600 mm (IxPxA), svoris 925 kg - Dokumentacija prieinama: Ne - CE sertifikatas: Ne Iodpowng Iwofx Abkotr Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumų apmokestinimas: PVM atskaitomas verslininkams Pristatymas ir įrangos priėmimas (tarpininkavimas) galimas bet kuriuo metu iš pramonės srities Yorick Diebels

Sąlyga: naudotas, Gamybos metai: 2001, Tipas: Record 121 Darbo ašių skaičius: 3+ Naudinga darbo sritis X-Y-Z ašyse: 2600-1080-250 mm Stalo matmenys: 2600 x 1080 mm Veleno apsukų diapazonas: 900 - 18 000 aps./min. Ijdpfx Abov Dtibsketr Frezuojančių velenų skaičius: 1 Įrankių keitimo pozicijų skaičius: 12 Įrankių tvirtinimo sistema: HSK63F Darbinis stalas: matricinis stalas Pagrindinis variklis: 7,5 kW Vakuuminio siurblio našumas: 250/300 m³/h Vakuuminio variklio galia: 6,5 kW Ištraukimo jungties skersmuo: 150 mm Suslėgto oro slėgis: 7 bar Įtampa: 380V/50HZ Transporto matmenys: 3700 x 3200 x 2600 mm Svoris: 3500 kg Kaina: 15 500 Eur

Gamybos metai: 2010, Sąlyga: beveik kaip naujas (naudotas), I am selling an SCM Sigma Prima 67 panel saw, year of manufacture 2010. Cutting area: 3300x3200mm. Maximum cutting height: 67mm. Maximum saw blade diameter: 320 + 160mm. Main motor: 5.5kW. Itedpfxji Evbzs Abker Scoring unit motor: 1.1kW. Total power: 10kW. Total dimensions (W x D): 5400mm x 7000mm. 8 gripping units with pneumatic adjustment. Side positioning rollers from above. Pneumatic feed. WinCut optimization software included. Label printer included. Ottimo Perfect Cut software included. Very good condition. Immediately available.

Sąlyga: naudotas, SCM Sintex NTE keturpusė obliavimo automatas Elektroninis keturpusis obliavimo ir profiliavimo automatas Obliavimo plotis: 180 mm Obliavimo aukštis: 105 mm 4 velenai 1 ir 4 veleno variklis: 7,5 kW Ijdpfsxqf Dyex Abkotr 2 ir 3 veleno variklis: 7,5 kW Veleno skersmuo: 35 mm Ilgas padavimo stalas apie 2300 mm Veleno apsisukimų dažnis: 6000 aps./min. Padavimo greitis: 6/12 m/min Elektrinis aukščio ir pločio reguliavimas Tepimo siurblys Įskaitant obliavimo įrankius Mašina PATIKRINTA DIRBTUVĖSE, LABAI GEROJE BŪKLĖJE iš Lieboch sandėlio / GALIMYBĖ LIZINGUI

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), Carriage length: 3200 mm Electric saw blade angle adjustment Electric saw blade height adjustment Cutting width right: 1700 mm Main motor power: 7.5 kW Scoring saw motor power: 0.75 kW Saw blade size max/min: 400/300 mm CE certified Itjdpfxolcfhte Abker Year: 2001

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, ST 3 classic F 23 – Combined Saw and Spindle Moulding Machine With tilting saw blade, tilting spindle moulder, and anodized aluminium sliding table Robust steel and grey cast iron construction Large support surface and precise cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large outrigger (900 x 600 mm) with extendable aluminium telescopic fence Max. saw blade diameter 315 mm with scoring unit, tiltable from 90°–45° Rip fence with fine adjustment Stable saw unit and large double-trunnion spindle moulder aggregate ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-relieved cast iron Three spindle speeds, manually adjustable from 3,500 to 10,000 rpm Spindle with reversible rotation direction Standard curved milling guard Two 5.0 kW motors with high power reserves Grey Cast Iron Spindle Moulder Unit Top-mounted on both sides Top precision ball bearings Close to pivot point Four optimally graded spindle speeds, allowing for trimming of workpieces Powerful Motors Industrial motor, 100% duty cycle suitable for continuous operation (full load) Scope of delivery: Curved milling guard Anodized aluminium format sliding table Aluminium fence jaws Folding stops Technical Data Cast iron working table dimensions: 1112 x 430 mm Cutting length: 2250 mm Max. saw blade diameter with/without scorer: 315 mm Max. cutting height at 90°/45°: 100/70 mm Max. crosscutting width: 2660 mm Saw blade tilting: 90°–45° Cutting width: 900 mm Speed: 4000 rpm Spindle moulder: – Itjdpjcnwydofx Abksr Spindle tilt: 90°–45° Usable spindle length: 100 mm Max. tool diameter: 210 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 180 mm Speeds: 3,500/7,000/10,000 rpm General: – Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) Weight: 470 kg Extraction port diameter: 2 x 120 mm Extraction port diameter saw blade guard: 60 mm Location: Ex stock 54634 Bitburg – Available immediately –

Sąlyga: labai geros būklės (naudotas), Four-side Planer SCM Sintex XL Working width: 23-180 mm Working height: 6-100 mm Number of spindles: 4 Spindle arrangement: Bottom: 7.5 kW Right: 5.5 kW Left Top Minimum workpiece length: 300 mm Spindle diameter: 35 mm Feed speed adjustable via frequency inverter: 4-12 m/min Ijdpfx Absw Hbf Ieketr Technical documentation CE certificate

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Plokščių pjūklas SCM Sigma Impact su galiniu pakrovimu. Mašina išmontuota. Isdpfx Absw Rdkaekstr

Sąlyga: labai geros būklės (naudotas), Formatinio pjūklo staklės SCM Si400e 9/24 Techniniai duomenys: Itedpfx Absw Rkz Sekjr Vežimo ilgis: 3200 mm Elektrinis pjūklo kampo reguliavimas Elektrinis pjūklo pakėlimas Elektrinis liniuotės nustatymas dešinėje pusėje Pjovimo plotis dešinėje: 1270 mm Maksimalus pjovimo aukštis: 130 mm Pjūklo apsukos keičiamos diržu Paankstintojo apsukos: 6500 aps./min Apsauga Avarinis išjungiklis Pagrindinio variklio galia: 5,5 kW Paankstintojo variklio galia: 0,75 kW Bendri matmenys: Aukštis: 1400 mm Plotis: 4300 mm Ilgis: 3550 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, For sale is a high-quality panel saw from SCM, renowned for its exceptional precision, stability, and smooth operation – ideal for professional woodworking applications. Technical Highlights: Precision: Effortlessly running sliding table with a guiding accuracy of 0.05 mm over a 3 m travel length Construction: - Top section made from a multi-reinforced, torsion-resistant aluminum profile - Base made from an extremely rigid welded steel frame - Running surfaces (top and bottom) from induction-hardened, ground steel - Mounted carriage for outstanding smoothness, comparable to ball bearing movement Isdpfexk Uvfox Abkstr Technical Specifications: Fixed table: 1150 x 630 mm Table height: 880 mm Sliding table: 3050 x 350 mm Sliding table travel: 3200 mm Saw blade tilt range: 90° – 45° Maximum saw blade diameter: Ø 450 mm Scoring blade: Ø 120 mm Spindle diameters: main saw 30 mm, scorer 20 mm Main saw speeds: 3200 / 4500 / 6000 rpm Scorer speed: 9800 rpm Cutting width with rip fence: max. 1000 mm Crosscut length (with scoring blade): max. 3200 mm Performance & Dimensions: Main saw motor power: 7.5 HP Scorer motor power: 1 HP Required space: 3200 x 3300 x 1000 mm Weight: approx. 900 kg Dimensions with seaworthy packaging: 2120 x 1270 x 1080 mm The machine impresses with its top-tier build quality, robust construction, and excellent cutting performance. Perfectly suited for precise cutting tasks in furniture and interior fittings as well as for professional crafts. Delivery possible and extensive testing available.