Scm Sandya 5 pirkti naudotą (597)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping tongs: 8 pcs. Saw carriage height adjustment on THK linear guides Pressure beam with slots (through-feed) Side aligner Pneumatic quick-change saw blade system Extraction port diameter: 1 x 120 mm & 1 x 150 mm Machine dimensions (L x W): 5,700 x 6,000 mm Weight: approx. 2,500 kg Kjdpfx Aohvan Iogfslp INVERTER NEW Notice for used machinery: • Technical specifications and prior sale subject to change. • All prices are ex-works, loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect machines at our site. • Special agreements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)

Gamybos metai: 1980, būklė: reikia remonto (naudotas), Planing width: 35 cm Max planing height: 21 cm Engine tank for the milling machine! Kedpfxsh Tx Aws Agfslp The rest is operational Machine requires inspection

Būklė: naujas, Technical Data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Kedpfxehtuvro Agfolp Abrasive belt width/length mm: 1,370/2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working Units: 1st Unit: "RA" angled-ribbed contact roller, Sh 86, diameter 160 mm 2nd Unit: Combo: Rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding shoe “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding shoe “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller/sanding shoe unit - Sector activation via electronic control, synchronizing engagement with the feed speed and adjusting the number of active segments depending on the workpiece geometry, enabling selection of more or fewer sectors to the left and right of the workpiece. - Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar at infeed Additional Equipment: Roller table infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW electric fan (5.5 HP) integrated into the machine frame Oscillating blow-off device 2nd unit Touch screen 10.4” display with ‘eye S’ software integration ATTENTION: IMAGES ARE SAMPLE PICTURES OF A SIMILAR SD70!

Būklė: naudotas, Gamybos metai: 2007, Working area: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel path X-Y: 2980 x 1271 mm. Z-axis traverse: 200 mm. Clearance height: 180 mm. The main body structure is a monolithic design made of thick-walled steel. It is reinforced throughout the machine bed with welded-in triangular plates, making it extremely stable. The triangular shape with a broad base, used for load-bearing parts, is the key to ensuring sustained precision and stability. The machine layout allows the operator to optimize workflow with a minimal footprint. This main body provides the processing unit with a balanced and secure foundation, featuring outstanding load distribution. The moving aggregate carrier is manufactured as a solid monoblock. It is positioned in the X-direction on ground, prismatic linear guides using recirculating ball carriages. The working unit is also mounted on these ground prismatic guides and ball carriages on the mobile aggregate carrier. Kjdpsx Twdysfx Agfolp Description of aggregates and basic accessories: Drilling unit: Drilling head with 10 + 4 spindles • 6 individually selectable vertical spindles in X • 4 individually selectable vertical spindles in Y • 2 horizontal spindles in X (1+1) • 2 horizontal spindles in Y (1+1) • Speed: 4,000 rpm • Power: 2.2 kW • Pitch: 32 mm • Chuck: M10 with 11 mm seating • Extraction nozzle: D = 160 mm Vertical milling unit (Position 2): • Tool holder HSK 63F • Speed: 1,500 – 24,000 rpm, stepless via inverter • Motor power: 4.4 kW (6 HP) at 12,000 rpm (S1) • CW/CCW rotation • Ceramic bearings • Scope of delivery: 4x tool holders (right) without collet Tool changer: • Side-mounted 7-position tool magazine (TR7), fully enclosed against chip projection • 7 tool slots for HSK 63F tool holders in a row • Max. tool diameter D = 120 mm • Max. weight per tool holder 4.5 kg • Max. total tool weight 20 kg (TR7) • Angular gear units can be accommodated Horizontal milling unit (Position 1): Horizontal unit with two opposed outputs for milling and grooving. • Speed: 9,000 – 18,000 rpm, stepless via inverter • 1 output for collet 3-20 mm (ER32) • 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) • Motor power: 3 kW (4 HP) • Max. front milling tool diameter: 20 mm • Max. front milling tool length: 110 mm • Max. rear milling tool diameter: 12 mm • Max. rear milling tool length: 80 mm • Max. saw blade diameter: 100 mm • Saw blade bore (ER32): 50 mm • Saw blade arbor diameter (ER20): 12 mm Worktable: The worktable is designed to guarantee the operator maximum freedom of movement. The quick-release vacuum clamping system ensures maximum flexibility with precise positioning and optimal holding of workpieces. • 4 supports, 900 mm, steplessly adjustable manually along X • 8 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) • 2 stops in X (1 left / 1 right) • 1 stop in Y per support (total 6) • Retractable reference stops are CNC controlled • Supplied: 4 plug-in adapters for suction cups • Pendulum processing as standard (2 working zones) Axis motion: The drive system in X, Y and Z directions uses ground recirculating ball screws of the highest precision class. The ball screw for the X-axis is positioned precisely at the center line...

Būklė: naudotas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Kraštų klijavimo staklės SCM K560HP - 2020 metų. PILNI SERVO VARIKLIAI. Aptarnauta autorizuoto SCM serviso. Pilnai veikianti, nuolat eksploatuojama. Planuojamas įrenginio išmontavimas: 2026 m. sausis/vasaris. Išsami funkcijų aprašymas pridėtose nuotraukose. Galima apžiūrėti ir išbandyti vietoje. Kledjxn T Sgspfx Agfop

Būklė: naudotas, Gamybos metai: 1992, Darbinis plotis: 520 mm Obliavimo aukštis: 250 mm Obliavimo velenas: juostiniai peiliai Peilių skaičius: 4 Aukščio reguliavimas: elektrinis Ksdsyt E Raepfx Agfjlp Obliavimo storio rodmuo: skalė Padavimo greitis: 2 greičiai Įtraukimo volas: plienas Ištraukimo volas: plienas Stalo volai: nėra Variklio galia: 5,5 kW Ištraukimo prijungimas: 140 mm Staklių ilgis: 1200 mm Staklių plotis: 1400 mm Svoris: apie 900 kg

Būklė: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, galia: 12 kW (16,32 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, X ašies eiga: 3 660 mm, Y ašies eiga: 1 550 mm, Z ašies eigos atstumas: 150 mm, ašių skaičius: 3, įrankių magazino lizdų skaičius: 10, valdiklių gamintojas: SCM XILOG MAESTRO, bendras aukštis: 2 600 mm, bendras ilgis: 7 201 mm, bendras plotis: 4 407 mm, bendras svoris: 3 500 kg, Įranga: CE žymėjimas, apsaugos šviesos užtvara, PRATIX N15 - CNC valdomas apdirbimo centras Mašinos funkcijų nuotolinis valdymas Paruošimas kampiniam reduktoriui su įtempimo sistema 2 elektroniniai atstumo davikliai Kledjyu Ty Eepfx Agfep Automatinis centrinis tepimas Pūtimo antgaliai su mikrotepimu Papildomas aparatinės įrangos raktas Xilog Maestro (USB jungčiai) Velenas Įrankio tvirtinimo tipas: HSK F 63 Apsisukimų dažnis: 1 500 - 24 000 aps./min. Galia (S1/S6): 8,5/12 kW nuo 12 000 iki 18 000 aps./min. Vakuuminis siurblys: Becker VTLF 2.250 Tūrinis srautas 50 Hz: apie 244 m³/val. Absoliutus vakuumas 50 Hz: apie 200 mbar Galia 50 Hz: apie 5,5 kW

Būklė: naudotas, Gamybos metai: 2005, Carriage length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 150 mm Scoring unit: Yes Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: electric / position control Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Crosscut fence scale: analog scale Saw blade diameter: 450 mm Spindle speeds: 3 Motor power: 7.5 kW Motor brake: Yes, automatic Extraction connection: 80 mm and 120 mm Kodpfjuix Egsx Agfolp Machine length: 3500 mm Machine width: 2200 mm Weight: 1000 kg

Būklė: naudotas, Number of machines: 9 units. Wood window production line for sale on behalf of a customer. Machines can be inspected while still in operation. Sale includes machines with tools and programmed machining processes for the manufactured systems. Incl. equipment for production of angled and round-arch windows. Pos. 1: Weinig Powermat 500, year 2010, window version ----- - 6 spindles, 5x PowerLock - 8,000 rpm - large PowerCom control system - spindles 2, 3, 4 with axial CNC control - spindles 2, 3, 4, 5 with radial CNC control - Window package for glazing bead grooving: pneumatic sequencing for right-hand and top spindles dedicated to bead grooving - includes existing Leitz planing and beading tools - linked with Maweg single timber sanding machine Saturn Duo, year 1985, and workpiece return conveyor Pos. 2: SCM Windor 40 R window system, year 2006 ----- - 2 long slotting spindles, CNC controlled - Optima 16: boring aggregates for end and longitudinal drilling - ROTATEN: angled window device - 3 long profiling spindles, CNC controlled + aggregates from top and bottom - tilt cart for small sashes - workpiece return station - includes Leitz window and door tooling - includes separate OKOMA UF 3 rebating machine with tools Pos. 3: HOMAG CNC machining center BMG310/42/F/K, year 2018 ----- - gantry machine, 5-axis Drive 5C+ with 15 kW - overhead laser - working range: 4200 mm length, 1350 mm depth - disc magazine: 32 positions - linear changer: 8 positions - fixed drilling head: 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - interface for PowerClamp clamps, 8 units - approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop software - chip conveyor - various small solid wood clamps, used for box windows - includes Leitz tools for Homag with round-arch capability - includes Barbaric vacuum lifter, year 2015 Pos. 4: Löwer MZP 1 mini finger-joint press ----- - for round arch window production Pos. 5: S+S frame press type Bavaria 200 L, year 2014 ----- - working size: 4000 x 2600 mm - with central pressure beam and transverse pressure unit - motorized width adjustment - basic set of counter-profiles - angled window control - tilting pressure plates + extension for pointed windows - intermediate insert for pressing small sizes - various carrier plates for counter-profiles and counter-profiles Pos. 6: Striffler sash hardware assembly table ----- - with automatic screwdriver and screw feeding system - hardware rack - punch for Roto hardware Pos. 7: Tools ----- All tools belonging to the machines for the wood and wood-aluminium systems IV 72 + 92 mm shown in the PDF: - windows - lift-slide doors - round and angled windows - box-type windows - entrance doors in various versions - putty rebate variants - ... Tools are sold in the current condition, scope, and with provided accessories. Note regarding window sections, tool drawings, and tool system listings: Company Engelfried offers no warranty that the actual tools available correspond exactly with the systems stated and depicted. Kedpfx Ageyclwxefslp (...

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), obliavimo plotis: 500 mm, Dviguba obliavimo staklė Kjdpfjyu N Ulsx Agfslp

Būklė: labai geros būklės (naudotas), Daugiafunkcinis SCM 350 įrenginys: formatavimo pjūklas, storio obliavimo staklės Storio obliavimo staklės: - plotis 35 cm - maks. aukštis apie 220 mm - 3 peiliai - 1 padavimo greitis Lyginimo obliavimo staklės: - plotis 35 cm - stalų ilgis 180 cm Kodpfx Ageyhdcdjfslp - 3 peiliai - kampu reguliuojamas liniuotė Freza: - velenas fi30 - velenas reguliuojamas aukštyn-žemyn ir kampu - 4 greičiai - šoninė važiuoklė - reguliuojamas liniuotė Pjūklas: - reguliuojamas aukštyn-žemyn ir 0-45° kampu - šoninė važiuoklė - liniuotė ant šoninės važiuoklės - priešpjūklis - maks. pjūklo skersmuo 300 mm - pjovimo aukštis su 300 mm pjūklu – 90 mm Horizontalus gręžtuvas: - staliukas reguliuojamas aukštyn-žemyn, į priekį-atgal ir į šonus Įrenginys turi 3 po 3 kW variklius, Maitinimas 380 V, Naudotas, puikios būklės, paruoštas darbui, Tvirta daugiafunkcinė mašina.

Būklė: labai geros būklės (naudotas), Formatinė - plokštinė pjūklas SCM class px 350i, pjovimo ilgis 320 cm, agregato pasvyrimas 0-45 laipsnių, maks. disko skersmuo 350 mm, maks. pjovimo aukštis 105 mm, maks. pjovimo aukštis pasvirus 72 mm, pjovimo plotis su galiniais ribotuvais 1300 mm, Kedpfjyf H Tgjx Agfjlp variklis 5,5 kW, pjūklo greitis – 4000 aps./min., įranga įstrižiniam pjovimui, staklės labai geros būklės, galima patikrinti prieš perkant.

Būklė: beveik kaip naujas (naudotas), SCM under-table spindle moulder Sliding carriage integrated in the table, 120 cm Klodewt A Iqepfx Agfop Electric adjustment of height and tilt Spindle diameter: 30 mm Motor power: 7 kW 4 spindle speeds Condition: very good

Būklė: geras (naudotas), Gamybos metai: 1988, naudotas storio obliavimo staklės SCM S52 Pagaminimo metai: 1988 Stalo dydis: 520x850 mm Darbo plotis: 520 mm Darbo aukštis min.: 3 mm Darbo aukštis maks.: 240 mm Maks. drožlių šalinimas: 8 mm Tersa peilių velenas su 4 peiliais Peilių veleno skersmuo: 120 mm Peilių veleno apsukos: 4500 aps./min Padavimo greitis: 6,5-10-13-17 m/min Kledpfx Agoyvz N Eofep Variklio galia: 7,5 kW Užimamas plotas: 1000x900x1000 mm Svoris: apie 600 kg

Būklė: geras (naudotas), Gamybos metai: 1990, Naudota obliavimo staklė SCM F 520 Metų gamyba: 1990 Gamintojas: SCM Modelis: F520 Darbinis plotis: 520 mm Bendras stalo ilgis: 3000 mm Įleidžiamo stalo ilgis: 1780 mm Išleidžiamo stalo ilgis: 1180 mm Hidraulinis stalo pakėlimas ir nuleidimas Reguliuojamas kampo liniuotė, matmenys 1500x175 mm Variklio galingumas: 5,5 kW Peilių veleno apsisukimų skaičius: 5000 aps./min Drožlės storio indikatorius Maks. drožlės nuėmimas: 8 mm Triukšmą mažinantys šukos ant veleno Tersa 4 peilių velenas, skersmuo 120 mm Žvaigždės-trikampio paleidimas Ištraukimo jungtis: Ø 120 mm Kledpfsyvz I Ijx Agfjp Stalo aukštis: 860 mm Matmenys (IxPxA): 299 x 95 x 110 cm Svoris: 950 kg

Būklė: naudotas, Gamybos metai: 1994, Variklis 6 / 7,5 kW su 4 volelių padavimo įrenginiu, pastovūs padavimo greičiai. Greičių plėtiniai. Darbo stalo aukštis: 920 mm. Veleno pakreipimas: -10° +45°. Maksimalus veleno išsikišimas virš stalo: 175 mm. Veleno apsukos: 3250/6500-5000/10000 aps./min. Maksimalus įrankio skersmuo: 250 mm. Svoris: apie 950 kg. Sandėlio vieta: Nattheim. Kljdpfxsw Enw Ij Agfsp

Būklė: naudotas, Gamybos metai: 2018, gabbiani p 55 automatinis horizontalus sijos pjūklas su 55 mm pjūklo projekcija Pjovimo matmenys: 4300/4300 mm - pjūklo vežimo greitis 6-60 m/min variklis 7 kW - įpjovimo blokas 1,3 kW spaustukų skaičius: 5 Klodjyn E Hqepfx Agfep

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2019, Šis SCM Olimpic K560 kraštų šlifavimo staklės buvo pagamintas 2019 m. Jame yra 7 colių jutiklinis ekranas su "Touch 7" elektroniniu valdymu, jis palaiko 0,4-3 mm storio apvadus ir apdoroja nuo 8 iki 60 mm storio plokštes. Mašinoje užtikrinamas 12-14 m/min padavimo greitis, joje yra karšto oro briaunų apklijavimo sistema. Susisiekite su mumis ir gaukite daugiau informacijos. Kjdpfsyabq Aox Agfelp • Mašinos būklė: Geros būklės • 7 colių jutiklinis ekranas (16:9) su "Touch 7" elektroniniu valdymu • Apvadų storis: 0,4-3 mm • Plokštės storis: 8-60 mm • Mažiausias plokštės ilgis: 140 mm • Mažiausias skydo plotis: 100 mm • Padavimo greitis: 12-14 m/min • Karšto oro kraštų apklijavimo sistema

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 350 mm, SCM Wide Belt Calibrating and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (hp) Feed gearbox motor: 0.45/0.8 (0.6/1.1) kW (hp) Feed speed: 4.5 / 9 m/min Standard equipment: - R140/85 rubber-coated calibrating roller, 140 mm diameter, 85 Shore – 1st position - R160/45 rubber-coated sanding roller, 160 mm diameter, 45 Shore – 2nd position - Hard sanding pad with manual working height adjustment - Motor power for 1st unit: 11 kW (15 hp) - Electronic ammeter for main motor current display - Electronic display of working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit - Rubber feed belt, 60 Shore - Roller table with two rollers at infeed and outfeed of working table Kledpfxstwqn Ss Agfep - Feed belt with two speeds (4.5 / 9 m/min) with gearbox motor - Automatic belt tracking Including the following special accessories: 1 pc. Version “B” for RCS, including: pneumatic on/off switching of roller on 1st unit “R”, pneumatic on/off switching of roller on 2nd unit “CS”, “MESAR” elastic segmented sanding pad, pneumatic on/off switching of sanding pad unit, electronic programming unit “LOGIC 50”, electronic adjustment of working height 1 pc. CE safety compliance 1 pc. roller table at infeed and outfeed for long workpieces, fitted with 5 non-driven rollers 1 pc. “RA” skewed-ribbed steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. sanding belt wear optimizer 1 pc. LED internal lighting 1 pc. rear door with inspection window 1 pc. Logic SC control system

Būklė: geras (naudotas), Universalmaschine für 7 Arbeitsgänge für Tischlerei, Möbelbau, maßgefertigte Einrichtungen, Türen, Holzfensterrahmen, Platten und verschiedenes – CE Standard Technische Daten: Aluminium-Schiebeschlitten auf gehärteten und geschliffenen Stahlführungen 3000 mm Ablaufhobel: Hobelbreite 350 mm Gesamtlänge der Tische 1800 mm Spindeldrehzahl 4850 U/min Anschlagneigung 90–45° 3 Messer Dickenhobel: Tischabmessungen 600 x 350 mm Min./Max. Arbeitshöhe 3–230 mm Maximale Spanabnahme 5 mm Frästisch: Spindellänge 136 mm Drehzahl 1400/3500/6000/8000 U/min Max. Werkzeugdurchmesser 180 mm Schutzhaube mit vertikalen Spannvorrichtungen Formatkreissäge: Aluminium-Schiebeschlittenlänge 3000 mm Sägeblatt schwenkbar 0–45° Max. Sägeblattdurchmesser 300 mm Spindeldrehzahl 4000 U/min Schnittbreite am Parallelanschlag 900 mm Auslegertisch mit teleskopischer Führung und 2 verstellbaren Endanschlägen Schutzabdeckung Klsdpfx Agsyuxplsfep Langlochbohrmaschine: Tischabmessungen 430 x 220 mm Werkstückspannvorrichtung Vertikaler Hub 100 mm Querhub 155 mm Längshub 115 mm 3 Motoren à 3 PS Absaugstutzen Durchmesser 120 mm Abmessungen der montierten Maschine (LxBxH): 3000 x 2800 x 1150 mm Transportabmessungen (LxBxH): 3000 x 1400 x 1300 mm Gewicht: 690 kg

Būklė: naudotas, Gamybos metai: 1994, used, excellent condition, fully equipped, extensive accessories with 3-axis control, pneumatic spindle changer, electronic fence adjustment 99 memory programs, 15 interchangeable spindles, adjustable table insert Brand: SCM Model: T150 Class Year of manufacture: 1994 Upgraded motor 6 / 7.5 kW tiltable from -10° to +45° motor brake motor with 2 speeds / pole-changing Speed stages: 3250/5000/6500/10,000 rpm reversible rotation (right/left) table size: 2700 x 700 mm spindle diameter: 15 x 30 mm / 1 x 40 mm spindle mounting: HSK quick-change spindle system SK / HSK table extension 2x 650 mm pull-out frame support aluminium fence jaws fence with fine adjustment digital displays for fence position, spindle diameter, cutting depth, jaw offset safety & pressure device control panel top mounted swiveling control panel - electric height adjustment - electric swivel adjustment - electric fence adjustment positioning control system for 3 axes: height/swiveling/fence with 99 programs digital display for swivel angle, spindle height, fence depth fold-away device for the fence socket for power feeder original price approx. €40,000–45,000 extraction connection 120 x 120 mm space requirement approx. 2700 x 1300 x 1800 mm weight approx. 1073 kg location: 97447 Gerolzhofen, free loaded, unpacked handover as is, as inspected, functional tested no refurbishment, Ksdoythdvjpfx Agfolp no warranty or guarantee

Būklė: naudotas, Gamybos metai: 2002, Naudotas, puikios būklės, mažai naudotas Gamintojas: SCM Modelis: SI 450 E Pagaminimo metai: 2002 Su CE tipo patvirtinimu Variklis: 7,5 kW Plieniniai bėgiai Vežimo ilgis apie 3200 mm Pjovimo plotis apie 1250 mm Maks. disko skersmuo: 450 mm Pakreipiamas Priepjovimo agregatas Paralelograminė apsauga Stalo prailginimas apie 480 mm Aukščio reguliavimas elektrinis Pakreipimo reguliavimas elektrinis Skaitmeninis indikatorius: - Aukštis - Pjovimo kampas Kampinis atrama paprasta Ištraukimo jungtis D 120 x 100 mm Užimamas plotas apie 3400 x 2400 x 1500 mm Svoris apie 1100 kg Sandėliavimo vieta: 97447 Gerolzhofen, pakrovimas įskaičiuotas, be pakuotės Perduodama tokios būklės, kokia apžiūrėta, Klodpfx Asythdcogfop be garantijos ir atsakomybės

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 520 mm, bendras plotis: 95 mm, bendras aukštis: 110 mm, bendras svoris: 800 kg, bendras ilgis: 299 mm, stalo ilgis: 2 990 mm, Planer/Thicknesser SCM F520 – after technical inspection, ready for operation Specification: • Technical condition – used, professionally serviced • Manufacturer – SCM • Model – F520 • Working width – 520 mm • Table length – 2990 mm • Hydraulic table lifting and lowering • Adjustable fence, dimension 175x1500 mm • Motor power – 4.0 kW • Spindle speed – 5000 rpm • Chip thickness indicator • Maximum cutting depth – 8 mm • Anti-noise combs at the cutterblock • 4-knife cutterblock, Ø120 mm, for standard knives • Star-delta starter • Connection for chip extraction – 120 mm diameter • Weight – approx. 800 kg • Overall dimensions: 299 x 95 x 110 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The photos shown reflect the actual condition of the item for sale • Possibility to connect and test the machine on-site • The auction price does not include VAT or transportation costs Financing and transport: Kledeyg Rygjpfx Agfjp • We organize transport using MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or a leasing loan

Būklė: naujas, Gamybos metai: 2023, galia: 7 kW (9,52 AG), obliavimo plotis: 520 mm, peilių skaičius: 4, bendras svoris: 483 kg, aukščio reguliavimo tipas: elektrinis, obliaus veleno skersmuo: 120 mm, obliavimo aukštis: 240 mm, Thickness Planer SCM MiniMax s 52es Specification: • Condition - new • Manufacturer - SCM • Planer table width - 520 mm • Planer table length - 850 mm • Minimum workpiece thickness - 3 mm • Maximum workpiece thickness - 240 mm • Maximum planer cutting depth - 5 mm • Motor power - 7 kW • Supply voltage - 400 V • Cutterblock with 4 traditional knives • Cutterblock diameter - 120 mm • Cutterblock rotational speed - 5000 rpm • Max planing width - 520 mm • Feed speed - 5 / 8 / 12 / 18 m/min • Extraction port diameter - 120 mm • Net weight approx. 493 kg • Overall dimensions - 144 x 108 x 110 cm (W x L x H) Additional Information: • The machine is brand new Klodpfxsqu U Dno Agfsp • The displayed photos show the actual condition of the item for sale • Possibility to connect and test the machine on site • The price listed in the auction does not include VAT or transport costs • Available immediately from stock in Italy

Būklė: naudotas, mašinos/transporto priemonės numeris: 007984, Didžiausias apdirbamas plotis: 1300 mm Klsdpfx Agewqdbmsfep Mažiausias apdirbamas storis: 4 mm Darbo stalas: fiksuoto aukščio Vakuuminis konvejeris: taip Darbo agregatų skaičius: 4 vnt