Scm Fs 410 Nova pirkti naudotą (575)

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Apatinio veleno frezavimo staklės SCM T120C su vežimėliu Specifikacija: • būklė – naudota, po pilnos apžiūros • gamintojas – SCM • modelis – T120C • veleno skersmuo 35 mm (galimybė pakeisti į 30 mm – papildomai 1500 PLN) • variklio galia 4 kW • variklio paleidimas trikampis-žvaigždė • sukimosi kryptys – kairė/dešinė • 4 reguliuojami diržo greičiai: 2,9/4,4/6/7,2 tūkst. aps./min • rankinis aukščio reguliavimas Gujdpswthmxofx Abmsk • kojinis stabdis ir veleno užraktas • išilginis stalas, tinka taip pat dygiavimui, ilgis 105 cm • originali dažyta danga • matmenys 100 x 110 x 110 cm (ilgis x plotis x aukštis) Papildoma informacija: • labai gera gamyklinė techninė ir vizualinė būklė • pateiktos nuotraukos atspindi tikrąją parduodamo daikto būklę • galimybė įjungti ir patikrinti įrenginį vietoje.

Sąlyga: naudotas, Gamybos metai: 2022, įsk. 2 klijų vonelę Klijavimo storis ritininėms briaunoms: 0,4 - 3 mm Klijavimo storis juostinėms briaunoms: 5 mm Min - maks. ruošinio aukštis: 8 - 50 mm Padvėrimo greitis: 9 m/min. Priešfrezavimo agregatas Klijavimo agregatas Nupjovimo agregatas Apvalinimo agregatas Lyginantis frezas Spindulio grandiklis Plokštuminis grandiklis Poliravimo agregatas Purškimo įrenginys Godpfxsw Aig So Abmouk Sandėliavimo vieta: klientas

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, SCM Linvicilbe SI3 formatinė diskinė pjovimo staklės Tipas: SI 3 Pagaminimo metai: 2018 Valdymas: 3 ašių Aliumininio stalo ilgis: 3.200 mm Pjovimo plotis dešinėje nuo disko: 1.500 mm Variklio galia: 7 kW (minimaliai) Išankstinio pjovimo diskas Pjūklo disko diametras: 400 mm Pjovimo aukštis: 140 mm Gusdpfx Aex Dbi Esbmek Jutiklinis ekranas su valdymu: Automatinis aukščio reguliavimas Automatinis pasvirimo reguliavimas Automatinis lygiagretus atmušėjas

Sąlyga: labai geros būklės (naudotas), Independent machine - Universal machine (First & Second in a machine line) Electronic control – EasyLing programmer Safe and soundproof casing No. 3+3 vertical columns to support the working units Min. useful working width (mm): 240 Max. useful working width (mm): 3,100 Min. useful working thickness (mm): 3 Max. useful working thickness (mm): 150 Retractable positioning cams, spacing (mm): 800 Feed rate (min/max), stepless adjustment (m/min): 4 – 24 Total power No. 4 machining groups (for each side of the machine): Scoring unit Automatic scoring unit 1 x 3 kW (6,000 RPM) Planing unit 1 x 6 kW (6,000 RPM) 0–10° Universal milling unit (electropneumatically controlled) 1 x 6 kW (6,000 RPM) 0°–90° Gusdpfx Abswhmdfsmok Universal milling unit 1 x 6 kW (6,000 RPM) 0°–90°

Sąlyga: naudotas, Gamybos metai: 1993, Naudota mašina Pagaminimo metai: 1993 Įranga ir techniniai duomenys: - Įtvirtinimo veleno ilgis: 180 mm - Veleno nuolydžio kampas: -10° iki +45° - Motorizuotas veleno pakėlimas su tiksliu reguliavimu - Motorizuotas veleno nuolydžio reguliavimas - Variklis: 5,5 kW - Stalo dydis: 1200 x 730 mm - Didžiausia stalo išpjova: 420 mm - Variklio stabdis - Apsisukimų skaičius: 3000/4500/6000/7000/10000 ap./min. - Apsisukimų indikacija - Ištraukimo jungtis: 125 mm - Su Aigner integraliniu atramos liniuotė - Su 3 volelių padavimu Guedpfx Aoxwz Rcsbmjk Prieinamumas: apie 2026 m. sausio vidurį/pabaigą Vieta: Hesenas

Sąlyga: geras (naudotas), Automatinė plataus juostos šlifavimo staklė su 2 juostomis (vokas + padas) baldams, interjero detalėms, medinėms durims ir langams, durims ir įvairiems skydams Guodpfjx A A Dujx Abmek Sudėtis: 1 grupė plieninis kalibravimo volas 2 grupė volas + apdailos padas Techniniai duomenys: Darbinis plotis mm 920 Darbinis aukštis mm 3 - 160 Šlifavimo juostos matmenys mm 930 x 1525 2 padavimo juostos greičiai m/min 4,5/9 Pagrindinio variklio galia AG 10 Įvado ir išvado voliniai transporteriai Elektrinis stalo pakėlimas Darbinis slėgis atm 6 2 ištraukimo pajungimai, skersmuo 160 mm Bendri matmenys mm 1500 x 1600 x 1700 h Svoris kg 1070

Sąlyga: labai geros būklės (naudotas), Keturių pusių obliavimo staklės SCM Compact P Gedpexph E Defx Abmjuk Maksimali obliavimo plotis: 230 mm Maksimali obliavimo aukštis: 120 mm Velenų skaičius: 4 Velenų išdėstymas: Apatinis 5,5 kW Dešinysis Kairysis 7,5 kW Nužulnintojai 7,5 kW Velenų skersmuo: 40 mm Dvi padavimo greičių įjungtys: 6/12 m/min Pneumatiniai medžiagos spaustuvai Paduodamojo stalo ilgis: 2500 mm

Sąlyga: naudotas, Gamybos metai: 2007, Working area: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel path X-Y: 2980 x 1271 mm. Z-axis traverse: 200 mm. Clearance height: 180 mm. The main body structure is a monolithic design made of thick-walled steel. It is reinforced throughout the machine bed with welded-in triangular plates, making it extremely stable. The triangular shape with a broad base, used for load-bearing parts, is the key to ensuring sustained precision and stability. The machine layout allows the operator to optimize workflow with a minimal footprint. This main body provides the processing unit with a balanced and secure foundation, featuring outstanding load distribution. The moving aggregate carrier is manufactured as a solid monoblock. It is positioned in the X-direction on ground, prismatic linear guides using recirculating ball carriages. The working unit is also mounted on these ground prismatic guides and ball carriages on the mobile aggregate carrier. Description of aggregates and basic accessories: Drilling unit: Drilling head with 10 + 4 spindles • 6 individually selectable vertical spindles in X • 4 individually selectable vertical spindles in Y • 2 horizontal spindles in X (1+1) • 2 horizontal spindles in Y (1+1) • Speed: 4,000 rpm • Power: 2.2 kW • Pitch: 32 mm • Chuck: M10 with 11 mm seating • Extraction nozzle: D = 160 mm Godjw Aifzjpfx Abmsuk Vertical milling unit (Position 2): • Tool holder HSK 63F • Speed: 1,500 – 24,000 rpm, stepless via inverter • Motor power: 4.4 kW (6 HP) at 12,000 rpm (S1) • CW/CCW rotation • Ceramic bearings • Scope of delivery: 4x tool holders (right) without collet Tool changer: • Side-mounted 7-position tool magazine (TR7), fully enclosed against chip projection • 7 tool slots for HSK 63F tool holders in a row • Max. tool diameter D = 120 mm • Max. weight per tool holder 4.5 kg • Max. total tool weight 20 kg (TR7) • Angular gear units can be accommodated Horizontal milling unit (Position 1): Horizontal unit with two opposed outputs for milling and grooving. • Speed: 9,000 – 18,000 rpm, stepless via inverter • 1 output for collet 3-20 mm (ER32) • 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) • Motor power: 3 kW (4 HP) • Max. front milling tool diameter: 20 mm • Max. front milling tool length: 110 mm • Max. rear milling tool diameter: 12 mm • Max. rear milling tool length: 80 mm • Max. saw blade diameter: 100 mm • Saw blade bore (ER32): 50 mm • Saw blade arbor diameter (ER20): 12 mm Worktable: The worktable is designed to guarantee the operator maximum freedom of movement. The quick-release vacuum clamping system ensures maximum flexibility with precise positioning and optimal holding of workpieces. • 4 supports, 900 mm, steplessly adjustable manually along X • 8 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) • 2 stops in X (1 left / 1 right) • 1 stop in Y per support (total 6) • Retractable reference stops are CNC controlled • Supplied: 4 plug-in adapters for suction cups • Pendulum processing as standard (2 working zones) Axis motion: The drive system in X, Y and Z directions uses ground recirculating ball screws of the highest precision class. The ball screw for the X-axis is positioned precisely at the center line...

Sąlyga: naudotas, Technical data: Spindle diameter: 35 mm Spindle height: 140 mm Speeds: 3000/4500/6000/8000/10000 rpm Manual spindle height adjustment Spindle lock Working table dimensions: 350x1190 mm Adjustable fence arms Extraction port diameter: 115 mm Motor power: 4 kW Power supply: 380 V Overall dimensions: Length: 1190 mm Width: 860 mm Guodpfxep T Un Se Abmsk Height: 1600 mm

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINES – First (1st) machine in a line Edgebanding material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 230 / 1600 (approx.) Control/Software: WinEdge Feed speed (adjustable) m/min: 10 - 30 (approx.) Protective and soundproof enclosures FORMATTING UNIT (per side): No. 2 pre-milling units (2 x 5.8 kW approx.) No. 2 joint milling units, aft (2 x 4 kW approx.) EDGEBANDING SECTION (per side): Gluing unit (hot-melt glue + pre-melter) Pressure zone (CNC-controlled) Edge magazine for rolls (number of positions): 6 Pre-milling unit 08.055 (2 x 1 kW approx.) Milling unit (2 x 0.5 kW approx., 0°–30°) No. 5 universal milling units for grooving, rebating, and profiling (5 x 4 kW approx.) Gsdpfx Abol Hydmjmsuk Profile scraper unit Flat scraper unit Spraying unit (for polishing fluid) Buffing unit + hot air unit – edge finishing

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1998, Frezavimo staklės T150 su padavėju 5 500 eur Frezavimo staklės T130 su padavėju 3 500 eur Frezavimo staklės SAC su padavėju 2 500 eur Gjdpfxex Av Aqs Abmouk Rinkinys 20 pjovimo įrankių 2 000 eur

Sąlyga: labai geros būklės (naudotas), veleno skersmuo: 30 mm, Įranga: variklio stabdis, Spindle moulder SCM type T130 with four-roller power feed, table size 1200x730mm, max. speed 10,000 rpm, spindle diameter 30mm. 5.5 kW motor. For an additional charge, a spindle with a diameter of 40mm can also be supplied. Gusdpjt Rfn Ejfx Abmjk

Sąlyga: naujas, Gamybos metai: 2025, CASADEI Libra 35 – Wide Belt Sander, Two-Belt Version Immediately available – Ex stock 54634 Bitburg Technical Data Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Abrasive belt width: 1115 mm Abrasive belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table adjustment motor power: 0.25 kW Main drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Photo shows optional equipment. Wide belt sander in two-belt version for widths up to 1100 mm, featuring a range of options suitable for cost-conscious workshops. Gjdpocr S Ecsfx Abmsuk Robust, tube-reinforced monoblock steel machine frame with high-mounted working units for maximum rigidity. User-friendly controls with clearly arranged front control panel. Motorized table height adjustment. Digital display for working height. Electronically regulated belt oscillation with reduced compressed air consumption. Automatic star-delta starting for the main motor. Natural rubber feed belt with negative profile. Feed table fitted with two rollers at the infeed and outfeed ends of the feed belt. Feed belt driven by gear motor, selectable between two speeds. Flexible steel pressure bar in front of the first unit. Rubber pressure rollers in front of and behind each working unit. Pneumatic belt tensioning per unit, with decimal correction for grit / belt thickness. Quality – Made in Europe. RTC Version 1st unit: diagonally grooved steel roller, Ø 120 mm, with fine adjustment for calibration. 2nd unit: combination unit with fine-adjustable working height for calibration and finish sanding, featuring a rubber-coated roller (Ø 120 mm, 45 Sh) and a hard sanding shoe with graphite lining on interchangeable insert. Scope of delivery: Table height adjustment with electronic height display Belt oscillation with electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-return feature (C.E.) Star-delta starting for the main motors Grooved calibration steel roller Selector switch for sanding shoe positioning from control panel Accessories: – Semi-hard flat sanding shoe – Automatic belt centering Location: Ex stock Bitburg – Special price

Sąlyga: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm 0.4 / 3 Edge thickness for solid strips/slats (min/max) mm 0.4 / 8 (12)* Panel thickness (min/max) mm 8 / 60 Control system "StarTouch" + "Touch 7" Feed speed m/min 12-18 Top pressure driven by V-belt (C.N.) Sprayer unit (for liquid anti-adhesive) AAR Adjustable fence, CNC-controlled "EASY SIZE PLUS" Jointing cutter unit 2 x kW Infrared heating for workpiece edge Gluing unit (P.U.R. glue + premelter) "VC/800" - "VC/6" + "AirFusion AF15" Guedpfx Aoxlqntjbmjk Edge pressure zone (CNC-controlled) Edge magazine for rolls - 1 End trimming unit K/SEL Premilling unit RS/K Milling unit RI / 800 (3 positions) Multi-function unit (radius/profile milling) "4 EDGE" KIT Spraying units (for sliding liquid) Profile scraper unit RAS/1000 Flat scraper unit RCA / 2C Universal milling unit for grooving/rebating and profiling K-100 (1 x kW 1.8) 90° Hot air blower - edge finisher Return direction "SAG" Mod. SPINNER 47 / 63

Sąlyga: geras (naudotas), Gamybos metai: 2010, veikimo valandos: 25 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AA2/001307, X ašies eiga: 6 500 mm, Y ašies eiga: 1 700 mm, Z ašies eigos atstumas: 250 mm, greitas poslinkis X ašimi: 60 000 m/min, greitas poslinkis Y ašis: 45 000 m/min, greitasis eiga Z ašyje: 30 000 m/min, padavimo ilgis X ašis: 6 500 mm, padavimo eiga Y ašimi: 1 300 mm, padavimo ilgis Z ašis: 1 mm, X ašies padavimo greitis: 6 000 m/min, Y ašies padavimo greitis: 45 000 m/min, padavimo greitis Z ašis: 30 000 m/min, nominali (akivaizdi) galia: 15 kVA, valdiklių gamintojas: NUM, valdiklio modelis: 1040, ruošinio ilgis (maks.): 6 500 mm, ruošinio plotis (maks.): 1 350 mm, ruošinio aukštis (maks.): 180 mm, bendras aukštis: 2 750 mm, bendras ilgis: 8 000 mm, bendras plotis: 4 000 mm, stalo plotis: 1 350 mm, stalo aukštis: 950 mm, stalo ilgis: 6 500 mm, veleno greitis (min.): 24 000 aps./min, ašies variklio galia: 11 W, Delovne smeri osi X-Y-Z: 6500 x 1350 x 250 mm Delovno območje: 6500 x 1250 mm C-os = 640, B-os = 270 Rezkalna enota PRISMA s 5 interpolacijskimi osmi: X, Y, Z, C, B Električno vreteno 11 kW, 600–20.000 min⁻¹ Orodni držalo HSK63 Delovna miza s TVN blazinicami in vakuumskimi priseski Križni laserski projektor na delovni mizi Guedpfx Ajw Au N Ssbmsk TVN vakuumski prisesek Pnevmatske sponke Orodni magazin za 24 orodij Vrtalna enota Vakuumska črpalka 5,5 kW, 250 m³/h CNC krmilnik NUM, operacijski sistem: Windows XP Xilog Plus Maestro Teža cca 5450 kg

Sąlyga: labai geros būklės (naudotas), 4-sided DOUBLE END TENONER LINE currently configured for INTERIOR DOORS, consisting of the following machines: X10023A) CELASCHI powered roller conveyor for feeding X10023B) CELASCHI DOUBLE END TENONER Model TSA 3 B 480 A Gujdowzmbqepfx Abmjk installed total power: 65 kW X10023C) CELASCHI 90° transfer (L-shaped powered roller conveyors) X10023D) CELASCHI DOUBLE END TENONER Model TSA 2 B 360 installed total power: 65 kW

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Markė: SCM Modelis: OLIMPIC K 500 T/ER-2 - CE Automatinis briaunų klijavimo aparatas su briaunų šlifavimo blokais, skirtas medienos, faneros, PVC, melamino ir ABS kraštams – tinkamas baldų, stalių gaminiams, individualiai gaminamai įrangai, plokštėms, virtuvės bei vonios baldams ir įvairiems kitiems gaminiams. Techniniai duomenys: Godpfx Aexnvr Aebmeuk Min./maks. plokštės aukštis: 8–60 mm Plokštės aukštis su apvalinimo bloku: 10–45 mm Krašto storis: 0,4–8 mm Krašto ritinio storis: 0,4–3 mm Minimalus plokštės plotis: 55 mm Padavimo greitis: 11 m/min Spaudiklis su motorizuotu vertikaliu judėjimu Panelių atraminė sija Garso izoliacijos apsauginis gaubtas Skysčių įvadas Komplektacija: Antiadhezinės priemonės purškimo blokas su dviem antgaliais – dvi talpos atskiram atskiriamojo skysčio padavimui Pirminio frezavimo blokas su dviem aukšto dažnio varikliais – deimantiniai įrankiai H64 mm – Ø100 mm, F 30, h 65 – kopijavimo komplektas VC 560 klijavimo blokas kraštui užnešti iki 60 mm panelėms – klijų bako talpa 1,5 kg – nuimamas bakelis Galinis nupjovimo blokas su dviem nepriklausomais varikliais, po 0,35 kW prie 12 000 aps./min. – variklio posvyrio kampas nuo 0° iki 15° – dvi pjūklo diskai Ø115 mm – priekiniai kopijavimo blokeliai Pasvirusi apipjaustymo/formavimo stotis viršutinei ir apatinei kraštų pertekliui pašalinti – du varikliai po 0,55 kW – 12 000 aps./min. – posvyrio kampas nuo 0° iki 25° – dvipozicinė pneumatinė sistema greitam perjungimui tarp plonų ir radiusinių briaunų apdirbimo Krašto apvalinimo blokas su dviem varikliais prizmatiškame bėgyje – leidžia apvalinti ir apipjauti plonas ir storas briaunas – du varikliai po 0,55 kW – 12 000 aps./min. Krašto gramdymo blokas optimaliam ABS/PVC kraštų apdirbimui su rotaciniais kopijavimo blokeliais bei dulkių nusiurbimo gaubtu ir nupjovų surinkimo kasete Klijų gramdymo blokas – pašalina klijų likučius nuo apatinio ir viršutinio panelės paviršiaus Poliravimo blokas plastikinėms briaunoms valyti ir poliruoti – variklis 0,25 kW – šepetys Ø150 mm Suspaustas oras: 7 bar Matmenys: 5500 x 1150 x 1550 (A) mm Svoris: 1 780 kg Neseniai atliktas aptarnavimas Nauji deimantiniai pirmo frezavimo peiliai Nauji kopijavimo ratukai...

Sąlyga: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips (min/max) option: mm 20 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 250 / 3000 (approx.) Feed speed (adjustable) m/min: 12 - 40 (approx.) Safety and noise-protection cabin Cam spacing (mm): 500 FORMAT PROCESSING (per side): Spraying unit (for liquid anti-adhesive) Protective cutter (pre-milling) (1 x approx. 4 kW) Rough trimming unit (2 x approx. 5.8 kW) Universal milling unit 1 x approx. 4 kW EDGING UNIT (per side): Edging unit (hot-melt glue + premelter) Edge magazine for rolls (No. 2-fold) + edge pressure zone End trimming unit (2 x approx. 0.35 kW) Pre-milling unit (2 x approx. 1 kW) Milling unit (2 x approx. 0.5 kW) 0°-30° Gujdpek Nk R Defx Abmok Multi-function unit (radius and contour milling) with 2 revolvers (8+8 positions) – max 27 m/min Universal milling unit for grooving/rebating and profiling 1 x approx. 4 kW (0° - 90°) Profile scraper unit + flat scraper unit + buffing unit

Sąlyga: labai geros būklės (naudotas), Double-sided solo machine (or as 1st and/or 2nd machine in a machine line) Edge thickness in rolls (min/max) mm 0.4 / 3 Panel thickness (min/max) mm 14 / 60 Working width (min/max) mm 260 (approx.) / 3200 Control/software: MAESTRO PRO EDGE Feed speed (adjustable) m/min 10–40 Safety and soundproof cabin + cam pitch (mm) 400 FORMAT PROCESSING (for each side): Protection milling cutter (pre-milling) AS (1 x kW 4) Chopper DTR (2 x kW 8) Sprayer unit (for liquid anti-adhesive) AAR EDGE BANDING SECTION (for each side): Radiator for lateral workpiece heating Edgebanding unit (hot melt + premelter) Pressure zone (CNC-controlled) Edge magazine for rolls (no. 2 positions), motorized End trimming unit YU/SP-750 (30 m/min) Pre-milling unit RSP Multi-profile milling unit (CNC-controlled) RI/S 2P Copy shaping unit (profile copying) C1+C2 (4 x kW 0.35) ED-SYSTEM with Fast-Release Profile scraper unit RAS/S Guodpfxjwhi Slo Abmek Flat scraper unit RCA/2C Spray units (for polishing fluid) Buffing unit SPE Universal milling unit for grooving/rebating and profiling U (1 left + 1 right) 2 x kW 5.5

Sąlyga: labai geros būklės (naudotas), Independent machine - Universal machine (First & Second in a production line) Electronic control with programmer Separate electrical and control panels Safety and soundproof enclosure No. 1 vertical column for supporting the working units Min. usable working width (mm): 220 Max. usable working width (mm): 3000 Min. usable working thickness (mm): 6 Max. usable working thickness (mm): 60 Retractable stop cams, spacing (mm): 400 Feed speed (min/max), infinitely variable (m/min): 4–24 Godpfx Aegz Alxobmeuk Total installed power: 40 kW No. 3 working units (per side of the machine): 1 automatic scoring unit: 2.2 kW / 3.2 kW 1 cutting unit: 5.5 kW / 7.3 kW (RPM: 3000 / 6000) 1 universal milling unit (electropneumatically controlled): 4 kW / 5.8 kW (RPM: 3000 / 6000)

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED FEEDING STATION Gedpfxol Hycwe Abmouk Portal machine, part of the line (SOFIT code: J10039) Vacuum system (with pump) No. 2 Vertical support columns for the upper crossbeam No. 1 Horizontal upper crossbeam (with carriage running on it) No. 1 Motorized carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum suction pads, adjustable No. 2 External roller conveyors (at floor level) for loading stacks of panels onto the feeding station No. 1 External motorized roller conveyor (receives the panels) from the feeding station Separate electrical control cabinet Electronic control—PLC MAGELIS Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 10 Panel thickness (min/max) mm 10 - 60 (approx.) Min. panel dimensions mm 210 x 230 (approx.) Max. panel dimensions mm 1200 x 3200 (approx.) Total connected load kW

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED DESTACKING - Bridge Gantry machine, part of the line (SOFIT code: JZ1030) Vacuum system (with pump) No. 2 vertical supports for the upper beam No. 1 upper horizontal beam (serving as the rail for the carriage) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 external roller conveyors for stacking panels from the destacker No. 1 external motorized roller conveyor from the destacker Separate electrical control cabinet PLC electronic control MAGELIS Perimeter safety fencing with safety mats Operating capacity (cycles/min) 10 (approx.) Panel thickness (min/max) mm 10 - 60 (approx.) Min. panel dimensions mm 210 x 230 (approx.) Max. panel dimensions mm 1200 x 3200 (approx.) Gedpfx Abjl Hyfcemeuk Total connected load Kw

Sąlyga: labai geros būklės (naudotas), Independent machine – universal machine (first & second in a production line) Electronic control – programmable Safety and soundproof housing – OPTIONAL No. 4+4 vertical supports for unit support Gusdpfsifz H Nex Abmok Min. useful working width (mm): approx. 150 Max. useful working width (mm): approx. 3100 Max. useful working thickness (mm): approx. 180 Retractable stop cams, spacing (mm): approx. 500 Feed speed (min/max) steplessly adjustable (m/min): approx. 8–40 No. 8 work units (for each side of the machine): 1 automatic scoring unit 1 planing unit 1 universal milling unit (electropneumatically controlled) 1 universal milling unit 1 profile milling unit (copying) with 2 vertical motors 1 sanding unit (with abrasive wheel) 1 sanding unit (with sandpaper)

Sąlyga: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving table (workpiece), stationary machining head – horizontal table (workpiece) Xilog Plus 2 control (Xilog Plus 2 software) Machining head safety cabin. With separate electrical and control panel No. 2 workpiece clamping grippers with interlock in the working area With automatic sheet pusher Infeed table (with conveyor belt) – outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 70 x 10 (2 x 5 mm) Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1300 x 80 (2 x 40 mm) Simultaneous machining of two workpieces possible (on Z-axis) WORKING UNITS (TOP): 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 kW No. 48 independent vertical drilling spindles No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit – diameter 125 mm No. 1 x HSK63F vertical main spindle (milling unit) Gedpfx Absfz I Ufemouk Power of vertical main spindle: 7.5 kW WORKING UNITS (BOTTOM): No. 48 independent vertical drilling spindles No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit – diameter 125 mm No. 1 x HSK63F vertical main spindle (milling unit) Power of vertical main spindle: 7.5 kW Injectors for glue feeding and dowel insertion. Dowel magazine for automatic dowel loading

Sąlyga: labai geros būklės (naudotas), Flexible CNC-Processing line for drilling, milling, and fitting of hardware. Numerical control system: "TPA Albatros." Comprising: Godpfxjhvagke Abmsuk 1) "Igel" loader, with 12 positions (for 12 panels), vertical panel feed. 2) CNC-Boring machine, Pantograph model Over 25.13 with insertion unit (bushings, shelf supports, and base fittings). - 1 working head (approx. 5.5 kW) with turret (10 positions) - 1 drilling head with 24 independent spindles (X-axis) - 1 boring head with 2 independent spindles (Y-axis) - 1 drilling head with 5 independent spindles (Z-axis) - 1 hardware insertion unit (screwing) - 1 hardware insertion unit (press-fit) - 1 supply and feed hopper 3) Discharge unit (90° transfer) with motorized conveyor for vertical panel outfeed. 4) Discharge unit (0°-90°), with motorized conveyor for bringing the panel from vertical to horizontal position.