Scm Compact 23 pirkti naudotą (584)

Sąlyga: naujas, Gamybos metai: 2026, CASADEI Libra 35 – Wide Belt Sander, Two-Belt Version Immediately available – Ex stock 54634 Bitburg Technical Data Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Abrasive belt width: 1115 mm Abrasive belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table adjustment motor power: 0.25 kW Main drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Photo shows optional equipment. Wide belt sander in two-belt version for widths up to 1100 mm, featuring a range of options suitable for cost-conscious workshops. Robust, tube-reinforced monoblock steel machine frame with high-mounted working units for maximum rigidity. User-friendly controls with clearly arranged front control panel. Motorized table height adjustment. Digital display for working height. Electronically regulated belt oscillation with reduced compressed air consumption. Automatic star-delta starting for the main motor. Natural rubber feed belt with negative profile. Feed table fitted with two rollers at the infeed and outfeed ends of the feed belt. Feed belt driven by gear motor, selectable between two speeds. Flexible steel pressure bar in front of the first unit. Rubber pressure rollers in front of and behind each working unit. Pneumatic belt tensioning per unit, with decimal correction for grit / belt thickness. Quality – Made in Europe. RTC Version 1st unit: diagonally grooved steel roller, Ø 120 mm, with fine adjustment for calibration. 2nd unit: combination unit with fine-adjustable working height for calibration and finish sanding, featuring a rubber-coated roller (Ø 120 mm, 45 Sh) and a hard sanding shoe with graphite lining on interchangeable insert. Scope of delivery: Table height adjustment with electronic height display Belt oscillation with electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-return feature (C.E.) Star-delta starting for the main motors Grooved calibration steel roller Selector switch for sanding shoe positioning from control panel Accessories: – Semi-hard flat sanding shoe – Automatic belt centering Iodpfx Ajcr S Ecef Ieal Location: Ex stock Bitburg – Special price

Sąlyga: labai geros būklės (naudotas), SCM Sintex keturių pusių obliavimo staklės Maksimalūs obliavimo matmenys: 18 cm x 12 cm. Staklės komplektuojamos su pilnu obliavimo peilių rinkiniu ir išankstinio pjovimo įrenginiu. Iedpfxjx E R Hxe Af Ijal Elektrinis obliavimo aukščio reguliavimas, pirmasis viršutinis padavimo ritinys yra priešais apatinį obliavimo peilį, padavimas yra dviem greičiais. Vertikalios ašys varomos atskirais 7,5 kW varikliais. Staklės importuotos iš Italijos, labai geros būklės. Yra 2 vnt.

Sąlyga: naujas, Robust steel and grey cast iron construction High-precision format sliding table made of anodized aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm possible, saw blade tiltable to 45° Large squaring frame (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Strongly ribbed cast iron surfacing tables, stress-relieved and annealed for decades of stability and flatness Helically toothed steel infeed roller for uniform material feed Three manually adjustable spindle speeds Spindle moulder with reversing (right/left rotation) Three independent industrial motors With lockable main switch, motor protection switch, emergency stop switch Surfacing table width: 410 mm Surfacing table length: 1810 mm Maximum planing depth: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed speed: 7 m/min Maximum material removal: 4 mm Extraction port diameter: 4 x 120 mm Cutterblock type: TERSA (3 pcs) Cutterblock diameter: 72 mm Speed: 5200 rpm Panel saw crosscutting length: 2250 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of saw blade: 2310 mm Saw blade tilt: 90–45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and worktable Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter, retractable/non-retractable: 180/210 mm Main drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx.: 560 kg Ijdpfx Aoiiynnjf Ieal INCLUDES OPTIONS - Handwheel with gravity numerical display for thickness table positioning - Sliding table length 2600 mm - Professional fences/stops - 'TERSA' cutterblock - Spindle moulder with reversing (right/left rotation)

Sąlyga: naudotas, SCM TECH 99 L CNC apdirbimo centras su spynos dėžutės frezavimo agregatu. Mašina VEIKIANTI ir paruošta demonstracijai. Iš pensijos/arba amatininko dirbtuvės. Parduodama iš staliaus dirbtuvių vietos, kaip apžiūrėta. Iedpjx H Nndofx Af Ieal

Sąlyga: naudotas, Gamybos metai: 2022, įsk. 2 klijų vonelę Klijavimo storis ritininėms briaunoms: 0,4 - 3 mm Klijavimo storis juostinėms briaunoms: 5 mm Min - maks. ruošinio aukštis: 8 - 50 mm Padvėrimo greitis: 9 m/min. Priešfrezavimo agregatas Klijavimo agregatas Nupjovimo agregatas Apvalinimo agregatas Lyginantis frezas Spindulio grandiklis Plokštuminis grandiklis Poliravimo agregatas Purškimo įrenginys Sandėliavimo vieta: klientas Iedpfx Asw Aig Sjf Ieal

Sąlyga: naujas, Gamybos metai: 2026, Maximum equipment for professionals. Multi-function combination machine with TERSA cutterblock, mitre cutting device, and tilting spindle moulder. Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is maintained even when the scoring saw blade is installed. Scoring unit with a separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from outside. High-precision sliding table made from anodised aluminium, running on hardened and milled steel guide rails. Large outrigger (1200 x 650 mm) with support roller and extendable aluminium telescopic stop, adjustable up to 3300 mm. Saw unit tiltable from 90° to -45°. Tilting spindle moulder from 90° to -45° towards the back into the fence. Four spindle speeds. Spindle moulder with forward and reverse rotation. Quick conversion to thickness planer thanks to parallel opening surfacing tables. Two-speed feed on the thicknessing table. Helical steel infeed roller for consistent timber feed. Three independent industrial motors. With separate saw rip fence and separate jointing fence. With lockable main switch. Equipment details: Format fence Immediate control Outrigger Outrigger with angle-adjustable telescopic crosscut stop, with degree scale. Sliding table with ball-contact system Made from anodised aluminium. Guides made of hardened and ground F550S steel, 15% harder than conventional steel. Rails are riveted, not glued. Smooth-running, quiet and reliable. 10-year HOLZKRAFT warranty on wear of the hardened guideways. Cast iron dual trunnion saw unit Height adjustment via dovetail guide. Extremely robust and torsion-resistant for precise cuts. Located close to the saw blade, supported on both sides. Height and tilt adjustment up to 45°. Scoring unit as standard with separate scoring motor 0.55 kW. Dual trunnion spindle moulder unit Large dimensioned, tilting dual trunnion spindle moulder unit made of cast iron. Spindle fence Heavy-duty professional design. The high-quality cast iron spindle fence comes as standard with fine adjustment. 3-position for fast repeat settings. Fine adjustment via rack-and-pinion, numeric display, and aluminium fence faces. Planer units Helical steel infeed rollers for constant and even timber feed. Massive anti-kickback devices prevent workpiece kickback. 4-knife Tersa cutterblock ensures optimal planing finish. Table lips provide quieter operation. Tersa planing cutterblock No more setting and screwing. Cutter change in seconds. Self-locking. Particularly quiet. Iaodpfx Afjcnxa So Isl Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, ensuring maximum stability under all working conditions. A special lifting mechanism maintains the position of the table safely even without locking. Rip fence With fine adjustment and quick clamping. Stable round bar guide made of ground steel. Repositionable aluminium scale. No dimensional gap as guide rods are overlapping. Separate surfacing fence Large professional version (1800 x 150 mm). Tiltable 0–45°. With quick adjustment. Stable round bar guide made of ground steel. Simultaneous opening. Type: No. 5500557

Sąlyga: naujas, Worktable dimensions: 2500 x 780 mm Spindle diameter: 30 mm Spindle swivel range: +/- 45.50° Spindle clamping length: 140 mm Max. tool diameter under table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Motor power (electro spindle): 7.50 kW Electro spindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with “Easy Touch 7” electronic control “Flex” milling fence with automatic setting via electronic control Right- / left-hand spindle rotation Extendable front table support INCLUDES OPTIONS: - “Fast” table insert with automatic adjustment via “Easy” control - “LL” version with 2 cast iron table extensions up to 2500 mm Notice for used machines: • Technical details are subject to error and prior sale. • Prices quoted are ex works – loading included! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claim. Buyers are free to inspect the machines on site. Iaedpfx Afod Etkho Iol • Special agreements are only valid in written form. (Inquiries will be answered only with your address and telephone number!)

Sąlyga: naujas, Gamybos metai: 2026, LAB 300 PLUS F 16 TERSA – Universal Combination Machine with Aluminium Sliding Table and Multiple Spindle Speeds For sawing, milling, surface and thickness planing, and optional slot mortising - Torsion-resistant steel and cast iron construction - Machine table made of hardened and ground cast iron - Smooth-running anodised aluminium sliding table, with a 10-year warranty on guideways - Large squaring frame with extendable aluminium telescopic fence and flip stops - Combination saw jointing fence with 45° quick adjustment - Max. saw blade Ø 315 mm with optional scoring unit, tiltable from 90° to 45° - Helical-toothed steel feed roller for uniform wood feed during thickness planing - Four manually adjustable spindle speeds - Standard reversible spindle rotation (right/left) - Three independent motors for each working unit Scope of delivery: - Combination surface/parallel fence - Curved milling protection hood - Tersa cutterblock - Anodised aluminium sliding table - Aluminium fence jaws - Flip stops - Eccentric clamping arm Ijdpfxecnxa Ns Af Isal Model: LAB 300 PLUS F 16 Tersa Article No.: 5500314 Technical Data ---Circular Saw--- Cutting length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90°/45°: 100/79 mm Max. cross-cut width left of saw blade: 1660 mm Cutting width at parallel fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilting: 90° - 45° ---Surface Planer--- Working width: 300 mm Planer table length: 1260 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs. ---Thickness Planer--- Table size: 300 x 450 mm Min./max. working height: 3 mm / 220 mm Max. stock removal: 4 mm Feed speed: 7 m/min ---Spindle Moulder--- Usable spindle length: 100 mm Max. tool diameter (retractable): 180 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 140 mm Spindle speed: 3500/6000/8000 rpm Spindle diameter: 30 mm Motor power (400 V / 50 Hz / S6 - 40%): 4 kW (5.5 HP) S6 40% Weight: 430 kg Extraction port diameter: 4 x 120 mm Saw blade guard extraction port Ø: 60 mm Sliding Table with Ball Bearing System - Equipped with a proven ball contact system, tested millions of times - Permanently smooth running due to hardened and ground guides - Not sensitive to dust and dirt, thanks to minimal contact point between ball and trapezoidal rail - 10-year Holzkraft warranty on wear of carbide guideways Extraction Hose Connection The extraction ports on both the surface planer (1) and thickness planer (2) face the same direction. The extraction hose can therefore be connected to the machine from the same side for both modes, eliminating the need for the hose to reach around the machine. Planer Units - Helical-toothed steel infeed rollers ensure constant, even wood feed - Heavy-duty anti-kickback devices prevent workpiece kickback - 3-knife cutterblock ensures optimal surface finish

Sąlyga: naujas, Bandsaw in compliance with European safety regulations, complete with: - Reinforced tilting grey cast iron table - Balanced cast iron flywheels - Telescopic blade guard with rack and pinion mechanism - Blade tension indicator - Precision upper and lower blade guides - Cleaning brush on the lower flywheel - Stable aluminium fences - Maximum saw blade width: 16 mm - Extraction port mounted under the table, attached to the machine frame - Microsafety switches on the machine doors Table dimensions: 600 x 520 mm Table height: 900 mm Flywheel diameter (cast iron): 450 mm Flywheel speed: 700 rpm Max. cutting height: 300 mm Max. cutting width: 440 mm Iodpfxjdibw Ao Af Isal Min./max. blade length: 3690 / 3742 mm Min./max. blade dimensions: 6 x 0.5 / 25 x 0.5 mm Three-phase motor: 3.0 kW, 50 Hz, 400 V Extraction hood diameter: 120 mm

Sąlyga: naujas, Gamybos metai: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder and anodised aluminium sliding table Robust steel and cast iron construction Large supporting surface and precise cast iron table High-precision format sliding table made of anodised aluminium (travel 2250 mm) Large crosscut frame (900 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm, fitted with professional flip-over stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° to 45° Rip fence with fine adjustment Stable saw unit and large double trunnion spindle moulder unit for maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-relieved cast iron Three manually adjustable spindle speeds, 3500-10000 rpm Spindle moulder with right/left rotation Standard supplied hood guard for curved work Safety reversing aluminium fence jaws Two powerful motors with high power reserves Two plug-in handwheels for quick and convenient operation Dimensions and Weights Weight approx. 470 kg Extraction Connection Extraction nozzle diameter: 2 x 120 mm Extraction nozzle diameter (saw blade guard): 60 mm Electrical Data Iaedpfohp Rdlex Af Iol Drive motor power: 2 x 5.0 kW Connection voltage: 400 V Network frequency: 50 Hz Spindle Moulder Spindle tilt: 0 to -45° Usable spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter non-retractable: 210 mm retractable: 180 mm Tenoning: 275 mm Circular Saw Unit Crosscut length: 1600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 2660 mm Saw blade tilt: 90-45° Max. cutting height 90°: 90 mm Max. cutting height 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 78 mm (Main) saw blade diameter: 315 mm (Main) saw blade diameter explained: independent of scorer (Main) saw blade speed: 4000 rpm Sliding Table and Table Table length: 1112 mm Table width: 430 mm Scope of delivery: Hood guard for curved work Anodised aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2022, The new universal CNC drilling machine, ideal for woodworking shops and craftsmen, offering an excellent price/performance ratio. Machine including options: - Sensor for panel calibration on the opposite side - Pressure booster on the Z-axis Iasdpfx Ajfhy R Nof Iol - Automatic lubrication - Machine operating interface software "Maestro CNC" - QWERTY keyboard - 10'' touch screen Max. workpiece dimensions X-Y-Z = 3000 x 900 x 50 mm Min. workpiece dimensions X-Y-Z = 300 x 90 x 10 mm Max. traverse speed of X-Y axes: 20 m/min Number of spindles on X-axis: 2 Number of spindles on Y-axis: 2 Number of spindles on Z-axis: 7 Grooving saw blade diameter: 125 mm Note on used machines: • Technical data subject to change and prior sale. • Prices quoted are ex works – loading included! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid if made in writing. (Inquiries will only be answered if you provide your address and telephone number!)

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Combined woodworking machine, 4-function, HOLZKRAFT CU 410c F 26 N Tersa -- Technical Data -- - Circular Saw - Cutting length: 2,600 mm Max. saw blade diameter: 315 mm Ijdpfxsd Dtc To Af Ieal Max. cutting height at 90° / 45°: 100 / 79 mm Max. crosscut width left of saw blade: 2,310 mm Cutting width at rip fence: 900 mm Saw blade tilting: 90° - 45° - Planer (Jointer) - Working width: 410 mm Planer table length: 1,660 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs. - Thickness Planer - Table dimensions: 410 x 605 mm Min./max. working height: 3 / 230 mm Max. cutting depth: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning cutter diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 6,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter (saw blade guard): 60 mm - Special offer price - Location: Ex stock 54634 Bitburg

Sąlyga: beveik kaip naujas (parodų įrenginys), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: Aluminium fence with 2 stops (1,500 mm each on right and left) No. 5 quick-change drill chucks No. 2 patented safety clamping cylinders Connection for extraction unit in accordance with EU standards Iaodpfx Afed Supgs Isl KEY FEATURES: Worktable made of cast iron Boring head made of aluminium Patented helical system for fine adjustment of drilling depth Pneumatic lowering of the boring head with locking at any position between 0° - 90° Extendable cast iron side fences with millimetre adjustment, scale with magnifier Drilling height adjustment via counter with decimal display Fixed stops at 37 mm for hinge boring The machine is built according to CE standards. TECHNICAL DATA: Drill spindles (left red/right black) 21 pcs (10/11) Distance between drill spindles 32 mm Working width 640 mm Max. drilling depth 65 mm Clamping cylinders 2 pcs Max. workpiece size 900 x 3000 x 60 mm Max. workpiece height 65 mm Number of motors 1 pc Motor power 1.5 kW, 400 V, 50 Hz Motor speed 2800 rpm Operating pressure 6-8 bar Air consumption per cycle 10 l/cycle Extraction port diameter 80 mm Worktable height 860 mm Overall dimensions approx. L x W x H 1030 x 1030 x 1285 mm Weight approx. 260 kg

Sąlyga: naujas, Gamybos metai: 2026, Quick-release belt tension via lever Upper belt support with graphite coating 250 mm large, balanced belt rollers provide optimal drive. With electric height adjustment With dust extraction and noise protection systems With noise protection certificate With two speeds Adapts to surfaces using a swiveling sanding shoe Beveled surfaces Standard with right-hand and left-hand rotation The quick-release belt tension allows fast and effortless changing of sanding belts. Delivery is partially assembled Dimensions and weights: Length: approx. 4540 mm Width/depth: approx. 1510 mm Height: approx. 1510 mm Weight: approx. 475 kg Dust extraction connection: Extraction nozzle diameter: 2 x 140 mm Worktable(s): Worktable height adjustment: 620 mm Max. working width on table: 900 mm Electrical data: Height adjustment motor power: 0.37 kW Extraction motor power: 0.75 kW Drive motor power: 3.3 / 4.5 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Sanding unit: Sanding belt length: 8100 mm Sanding belt width: 150 mm Belt speed(s): 9 / 18 m/s Iaedpfx Afeff Hdbe Ijl Sanding shoe length: 360 mm Sanding shoe width: 150 mm Workpiece: Max. height: 590 mm Max. workpiece height longer than worktable: 180 mm Explanation regarding max. workpiece height longer than worktable: Machining of the workpiece with overhang to the right beyond the worktable is possible.

Sąlyga: labai geros būklės (naudotas), Wide Belt Sander for Calibration and Fine Finishing Manufacturer: SCM Model: RCS 1st Unit: Calibrating Roller, Steel 2nd Unit: Combination Unit (Roller 60 Sh, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Iasdpfx Asxqggcsf Iel Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 emergency stops Table extension with 2 rollers, front and rear Sanding pad inserts covered with new graphite cloth Including nearly new sanding belts All documentation included Note – Used Machines: • Technical data and prior sale subject to change. • Prices quoted are ex location – loaded free on truck! • The machine has been cleaned and tested for functionality. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, minimax c 26g TERSA – Multi-function Combination Machine for Sawing, Milling, Planing and Thicknessing. Iaedpfxedqzh Ts Af Iol The work tables, made from heavily ribbed cast iron, and the welded steel frame ensure torsional rigidity and vibration-free operation. Unique in this performance class: smooth-running, anodised aluminium sliding table with ball contact system. Tilting saw blade from 90° to 45°. Table extension with aluminium crosscut fence for panels and large workpieces. Planer head with TERSA quick-change system with three planer knives. Helically geared steel feed roller ensures consistent workpiece infeed during thicknessing. Adjustable curve milling guard for profiling, standard with fine adjustment. Milling unit with two speeds. Three independent motors for each working unit. Quality made in Europe. Equipment Details Aluminium Sliding Table Proven ball contact system, used millions of times. Dust- and dirt-resistant due to minimal contact point between ball and guide rail. Permanently smooth operation. Saw Unit Adjustment Manual height and tilt adjustment of the saw assembly via star handle. Precise positioning using a scale. TERSA Planer Shaft No more adjustment or screwing needed. Planer knife changes in seconds. Self-locking. Extremely quiet operation. Spindle Moulder The milling unit offers two speeds for flexible use of tooling. The machine includes a finely adjustable curve milling guard for profiling. Tenoning operations can be performed effortlessly using the aluminium sliding table. Thickness Planer The powerful thickness feed allows planing of workpieces up to 200 mm high. The helical feed roller guarantees constant infeed. The jointer table folds space-savingly towards the inside of the machine. Conversion from surface planer to thickness planer takes only a second with a single movement. Surface Planer Standard with TERSA quick-change planing knife system. Large-dimensioned jointer tables. The tables, made of cast iron, ensure ultimate quiet running and freedom from vibration. Saw Unit Saw tiltable up to 45°. With 250 mm Ø saw blade, max. cutting height of 80 mm. The parallel fence enables cutting up to 500 mm width. Table Extension With angle scale and aluminium crosscut fence for mitre cuts on panels and large workpieces. Scope of Delivery: TERSA quick-change planer cutterblock Anodised aluminium sliding table Mitre fence with flip stop Multi-purpose fence for parallel cuts and surface planing Eccentric hold-down clamp Model minimax c 26g TERSA Article No. 5500027 Ripping length 1200 mm Cutting width with parallel fence 500 mm Max. crosscut width left of saw blade 1200 mm Saw blade tilt 90 – 45 degrees Max. cutting height at 90° 80 mm Sliding table length 1140 mm Sliding table width 201 mm Sliding table height 70 mm Saw table length 1024 mm Saw table width 224 mm Saw table height 900 mm Planer shaft type TERSA Planer shaft diameter 62 mm Number of planer knives 3 pcs Jointer table width 260 mm Jointer table length 1040 mm Tilt angle of saw/jointer fence 90/45 degrees Maximum planing depth 3 mm Thickness table length 450 mm Thickness table width 260 mm Minimum working height 3 mm Location: In stock at 54634 Bitburg - Immediately available -

Sąlyga: labai geros būklės (naudotas), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Min./max. workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Extraction connection: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller rubber-coated, 90 Shore Motor power: 11 kW 2nd Unit: Combination unit Sanding roller, rubber-coated, 60 Shore Sanding pad, fixed Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Outfeed table extension Dimensions (approx.) L x W x H = 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Technical data subject to error and prior sale. • Listed prices are ex-works, loaded free of charge! Isdpfxotwzyfo Af Ieal • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries including your address and telephone number!)

Sąlyga: naujas, Gamybos metai: 2026, Holzkraft Minimax ST 5es – Maximum Specification for the Professional Saw-Spindle Moulder Combination with Mitre-Cutting Attachment and Tilting Spindle Moulder Art. No.: 5501086 Ø 350 mm main saw blade with maximum cutting height of 118 mm, which is also achieved with the scorer blade fitted Scoring unit with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit tiltable from 90° to -45° High-precision format sliding table made of anodized aluminium Large outrigger (1200 x 650 mm) With material roller and extendable aluminium telescopic stop up to 3300 mm Tilting spindle moulder from 90° to -45° towards the fence Four spindle speeds With clockwise/anticlockwise spindle rotation Three independent motors With lockable main switch, motor protection switch Includes separate rip fence and separate jointer fence as standard Equipment details: Sliding table with ball contact system - Made from anodized aluminium - Guides made from hardened and ground steel, 15% harder than conventional steel Double-trunnion spindle moulder unit - Tilting, made from cast iron - Mounting points directly on the table ensure optimum smooth running - Spindle mounted high on precision ball bearings for minimal bearing load and maximum service life - Powerful industrial motors Moulder fence - Heavy-duty professional design - High-quality cast iron fence with fine adjustment as standard - 3-position for quick resetting of adjustments - Rack and pinion fine adjustment, numeric display, and aluminium fence jaws Rip fence - With fine adjustment and quick clamping - Stable round bar guide made from ground steel - Easily foldable for processing large workpieces - Reversible aluminium fence for narrow workpieces Cast iron double-trunnion saw unit - Height adjustment via dovetail guide - Extremely robust and torsion-resistant for precise cuts - Close to the saw blade, supported on both sides - Height and tiltable up to 45° - Scoring unit with separate scorer motor 0.55 kW as standard Outrigger with angle-adjustable telescopic crosscut stop - With angle indexing Dimensions and weights Weight approx. 900 kg Dust extraction connection Extraction port diameter: 3 x 120 mm Extraction port diameter blade guard: 80 mm Drive output Scorer motor: 0.55 kW Main motor: 2 x 5.0 kW Electrical data Connection voltage: 400 V Sliding table and table Sliding table width: 360 mm Sliding table height: 142 mm Iaedped Hx Hmsfx Af Iel Table length: 1380 mm Table width: 465 mm Spindle moulder Spindle tilt: 0 – -45° Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Maximum milling tool diameter - Lowerable: 240 mm - Tenoning: 320 mm Circular saw unit and scorer Cutting length: 3200 mm Cutting width with rip fence: 900 mm Max. crosscutting width left of saw blade: 3300 mm Saw blade tilt: 90 - 45° Max. cutting height at 90°: 104 mm Max. cutting height at 45°: 68 mm Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Wide belt sanding machine for calibration and fine sanding Working width mm: 1,100 Min./Max. working height mm: 4 / 170 Abrasive belt width mm: 1,115 Abrasive belt length mm: 2,150 Geared motor kW: 2.2 Feed speed m/min: variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower, unit 1 Ijdpsitvkusfx Af Ieal Oscillating belt cleaning blower, unit 2 Oscillating belt cleaning blower, unit 3 10” touch screen control panel "eye-S" 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatically segmented sanding pad / rubber-coated sanding roller 35SH Motor power 1st unit kW: 18.5 Motor power 2nd & 3rd unit kW: 18.5 Version "B" for RRCS with: Pneumatic activation and deactivation, 1st unit Pneumatic activation and deactivation, 2nd unit Pneumatic activation and deactivation, 3rd unit “MESAR” elastic segmented sanding pad Pneumatic activation and deactivation of sanding pad unit Electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Compact wide belt sander with combination sanding unit Special action equipment: - On/off control of the sanding pad from the operator panel - On/off control of the roller from the operator panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with pushbutton Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front Robust mono-block steel machine body with tubular reinforcement, robot-welded, aggregates mounted high for maximum rigidity Motor-driven height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail in front of the first aggregate Rubber pressure rollers, in front of and behind each sanding unit Pneumatic belt tensioning for each unit with decimal adjustment for grit/belt thickness Universally usable for solid wood and veneer, thanks to the combination unit Entry-level model for small businesses Working width 950 mm Equipment details Iodpfx Afogf Sw Ne Ieal Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite insert Universal design for calibration and sanding of solid wood, particleboard, and veneer Technical data Product length approx.: 1388 mm Product height approx.: 1668 mm Product width/depth approx.: 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V Current type: AC Phase(s): 3Ph Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW Height adjustment motor power: 0.25 kW Drive motor power: 7.5kW Sanding unit Sanding belt length: 1525 mm Maximum sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Workpiece height min.: 4 mm Workpiece height max.: 170 mm

Sąlyga: naujas, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 15.0 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" angled-grooved steel contact roller diameter 160 mm 2nd unit: Combination: Rubber-coated sanding drum diameter 160 mm, 45 Shore Elastic electronic segmented sanding shoe “MESAR” with 24 segments Design C: - Elastic electronic segmented sanding shoe “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding drum/sanding shoe unit - Sector activation via electronic control, synchronizing activation with the feed speed and controlling the number of segments based on the workpiece geometry; enables selection of more or fewer sectors on the left or right side of the workpiece Versions 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing bar at infeed Additional features: Roller table at infeed and outfeed for long workpieces Perforated table and transport belt Vacuum table with integrated 4 kW (5.5 HP) electric fan in the machine frame Isdpfx Afehtuvrj Ieal Oscillating air blower unit 2nd aggregate Touch screen 10.4” display with ‘eye S software integration’ ATTENTION: PHOTOS ARE SAMPLE IMAGES OF A SIMILAR SD70!

Sąlyga: naujas, Equipment: - 5-axis electronic control - Swiveling control panel over the table - Electronic adjustment of the scoring unit - Automatic parallel fence adjustment with spindle and linear ball bearing guide - Start/stop switch integrated into the outrigger table - “Quick Lock” crosscut frame, longitudinal fence with LCD displays “Full Support” - Sliding table with curved contact surfaces - 10-year warranty! - Telescopic arm with linear guide and ball bearing guidance Technical specifications: - Main saw blade diameter: 550 mm - Scoring blade diameter: 120 mm - Panel cutting length with extendable stop: 3200 x 3200 mm - Tilting range: 0 to +46° - Max. cutting height at 90°: 200 mm - Max. cutting height at +45°: 130 mm - Saw blade speed: 2500, 3500, 5000 rpm - Scoring blade speed: 8500 rpm - Extraction port diameter: 120 & 100 mm Isdpfx Aocrnm Njf Isal - Main motor power (50 Hz): 7.0 kW - Scoring unit motor power (50 Hz): 1.3 kW - Cutting width with parallel fence: 1500 mm Including the following OPTIONS: 570335 “Pro-Lock” system for fast clamping of the main saw blade with quick-release riving knife adjustment (no tools required)

Sąlyga: naujas, Saw unit swivels 46° to both sides. Programmable, electric saw blade adjustment. Control unit with electronic display for saw blade tilt and lift. Cast iron saw unit ensures torsional rigidity and vibration-free operation. Facilitated panel feed thanks to large squaring frame with roller. Telescopic fence with 2 professional flip stops. Outstanding cutting precision – the sliding table is guided precisely and smoothly using a long-proven ball contact system. Scoring unit is equipped with its own drive and is easily adjustable from the outside. Saw unit accommodates blade diameters up to 400 mm. Scoring saw blade diameter: 160 mm. 2-position manually adjustable saw blade guard. 3-axis control system. Motorized rip fence with electronic positioning. Includes: - Position display via encoder - Adjustment via ball screw - Stepless adjustment via switch or automatic positioning system - Incremental adjustment possible - Fence swiveling mechanism under the table - Cutting width: 1270 mm - Programmed movement of motorized adjustment and tilting for the saw unit UP version: - With swiveling control panel for maximum flexibility X version: - With Compex miter fence for quick and precise execution of miter cuts, with automatic stop position compensation (length compensation) - Extension arm with angle-adjustable telescopic crosscut fence - Optional degree scale division (Part No.: 5510403) - Rip fence with 2 LCD displays for fence position Includes options: - Version with max. sliding carriage travel 3200 mm - Integrated on/off switches for main saw blade and scoring unit motors in squaring carriage - Squaring frame with CompeX device - Version "READY 3 UP" - 2 cutting speeds (3500/5000 rpm) Extraction port diameter: 120 & 80 mm Main motor: 7.0 kW, 400 V, 50 Hz Squaring frame length: 1200 mm Squaring frame width: 650 mm Sliding table length: 3200 mm Sliding table width: 360 mm Cutting width with rip fence: 1270 mm Max. crosscut width left of saw blade: 3260 mm Ijdpfx Afsd Akygj Ioal Saw blade tilt: -46° to +46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Max. cutting height at -45°: 60 mm (Main) saw blade diameter: 400 mm Scoring saw blade diameter: 160 mm

Sąlyga: naujas, SCM gabbiani p90 Panel Saw – Showroom Machine – Special Offer! Technical Specifications: Saw blade projection: 90 mm Working table height: 950 mm Standard number of grippers: 5 Cutting dimensions: 3300 x 3200 mm Variable saw carriage speed: 6–60 m/min Variable pusher speed: 0–60 m/min Saw blade motor power: 7.0 kW Rotation speed: 4650 rpm Saw blade diameter: 340 mm Main saw spindle diameter: 80 mm Scoring unit motor power: 1.5 kW Rotation speed: 5850 rpm Scoring blade diameter: 200 mm Scoring spindle diameter: 80 mm Iedpfjiz A Amjx Af Ieal Compressed air requirement: 300 NL/min Compressed air pressure: 7.0 bar Extraction air requirement: 2440 m³/h Extraction air speed: 20 m/sec Extraction connection diameter: 4 x 120 mm Including the following options: 590134 Cutting depth 3200 mm (version 33) OF0263 eye-M operating console with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: Pre-installation for later retrofitting (without "gateway") OF0457 Human-Machine Interface (HMI) software MAESTRO ACTIVE 590258 Rear table with rollers, on the longitudinal fence side 590246 Fixed air-cushion table 2500x800 mm with rollers and reinforced fan 590239 2 x Movable air-cushion tables 1500x600 mm with rollers and reinforced fan 590244 Saw carriage with independent lifting control for main and scoring saw blades 590245 Optimized two-stage vertical lift of the saw blade (medium/maximum) 590143 Grooving unit with manual blade height adjustment 590241 Grooving function (feed/return of saw carriage) 590164 Double automatic lateral alignment device 301230 Foot switch for starting and stopping the work cycle 590044 Compact labelling unit – prints labels with barcodes 590144 4 x Additional grippers 900088 Magnetic tape monitoring for pusher position 102015 European safety standards (CE marking) 109993 MACHINE LANGUAGE: German

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Iasdohvan Iepfx Af Iel Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping tongs: 8 pcs. Saw carriage height adjustment on THK linear guides Pressure beam with slots (through-feed) Side aligner Pneumatic quick-change saw blade system Extraction port diameter: 1 x 120 mm & 1 x 150 mm Machine dimensions (L x W): 5,700 x 6,000 mm Weight: approx. 2,500 kg INVERTER NEW Notice for used machinery: • Technical specifications and prior sale subject to change. • All prices are ex-works, loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect machines at our site. • Special agreements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)