Scm 2250 pirkti naudotą (577)

Sąlyga: naujas, Gamybos metai: 2023, Robust cast iron and steel construction Milling spindle tiltable backwards from 0° to -45° Reversible spindle rotation (right/left) Ksdpjiknp Refx Abksnf Large dimension cast iron milling unit mounted directly to the table Solid and precise cast iron table Standard arc milling safety hood Aluminium sliding table with ball contact system Torsion-resistant, highly precise, smooth-running, and reliable in daily use 10-year SCM warranty on wear of the guide rails Milling spindle mounted high up with precision ball bearings for minimal bearing load and maximum service life Precise milling fence with quick adjustment and fine adjustment with scale on the fence jaw Integrated extraction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction port diameter 2 x 120 mm Working table (L x W): 1000 x 435 mm Table height: 900 mm Sliding table length: 1000 mm Sliding table width: 270 mm Main drive motor power: 5.0 kW, 400 V, 50 Hz Milling spindle tilt: 0 to -45° Usable spindle length: 100 mm Maximum projection above table: 130 mm Spindle speeds: 3500/7000/10000 rpm Spindle diameter: 30 mm Maximum lowerable tool diameter: 180 mm

Sąlyga: labai geros būklės (naudotas), Multi-spindle drilling machine SCM Model FM 29/S 29 spindles Spacing 32 mm Table 1200 x 780 mm Max drilling depth vertical 100 mm / horizontal 60 mm Knedpfsvxtfrjx Abkjf Spindle speed 3,800 rpm

Sąlyga: naudotas, Gamybos metai: 2007, Ašis pakreipiama: Taip, nuo -45 iki +45° Knjdpfx Ajx I Aiwobkjf Aukščio reguliavimas: elektrinis / pozicijos valdymas Sukimosi reguliavimas: elektrinis / pozicijos valdymas Frezuotuvo žnyplių reguliavimas: elektrinis / pozicijos valdymas Aukščio rodmuo: skaitmeninis Sukimosi kampo rodmuo: skaitmeninis Frezuotuvo atramos rodmuo: skaitmeninis Frezuotuvo ašies skersmuo: 30 mm, 40 mm, spaustuko lizdas kotiniams frezoms Sukimosi greičiai: be laipsnių (nuolat kintamas) Variklio galia: 7,5 kW Variklio stabdis: Taip, automatinis Siurbimo jungtis: 2 x 120 mm Staklių ilgis: 2600 mm Staklių gylis: 1400 mm Svoris: 1100 kg

Sąlyga: paruoštas naudoti (naudotas), 1 vnt. SCM CNC staklės 1 vnt. SCM plokščių pjovimo staklės 1 vnt. SCM CY7LEX CNC staklės 1 vnt. SCM briaunų klijavimo staklės Ksdpfx Ajx Hwgbebksnf 1 vnt. SCM briaunų klijavimo staklės

Sąlyga: naudotas, Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, pjovimo ilgis (maks.): 3 200 mm, pjovimo plotis ties tiesiniu vedliu: 1 270 mm, pjovimo aukštis (maks.): 100 mm, pjūklo disko skersmuo: 315 mm, pagrindinis pjūklo diskas skersmuo: 315 mm, pjovimo ilgis: 3 200 mm, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, - Gamybos metai: 2012 TECHNINIAI PARAMETRAI: - Didž. pjūklo disko skersmuo: 315 mm - Pjovimo ilgis: 3200 mm - Didž. pjovimo aukštis: iki 100 mm - Kampinis pjovimas: 0-45 laipsnių - Pjūklo disko greitis: 4000 aps./min Knsdpfxexdyvds Abkof - Variklio galia: 5 kW - Įpjaunamojo variklio galia: 0,9 kW - Didž. lygiagreta pjovimo: 1270 mm - Svoris: 800 kg

Sąlyga: naudotas, Gamybos metai: 2006, · Working area: 2,650 x 1,240 mm · Travel range X-Y: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm The structure of the machine base is a monolithic design made from thick-walled steel. It is reinforced across the entire machine bed by welded-in triangular plates, ensuring extreme rigidity. The use of a triangular shape with a wide base for all load-bearing components is the secret to long-lasting precision and stability. The machine layout allows the user optimal workflow while requiring minimum floor space. This base structure provides the processing unit with a balanced and secure foundation with excellent load distribution. The mobile unit carrier is built as a solid monoblock. It is positioned in the X-direction on prismatically ground guides using ball recirculating carriages. The working unit itself is mounted on these guides and ball recirculating carriages on the mobile carrier. Description of units and accessories (basic): Drilling unit: Drilling head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Pitch: 32 mm · Chuck: M10 with 11 mm locating seat Grooving saw unit in X: · Integrated in the drilling head · Grooving saw blade up to max. 120 mm diameter Main milling unit (Position 2): · Tool holder HSK 63F · Speed 1,500 - 24,000 rpm, variable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power 6.6 kW (9 HP) from 12,000 rpm (S6) · Clockwise/Counterclockwise rotation · Ceramic bearings · Supplied: 4 tool holders (right), without collet Tool changer R8L Automatic tool changer for 8 tools. Mounted on the rear carrier for quick access to tools. · Number of tool places: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total tool weight: 22 kg · Holder for one angle drive · Moves in X direction with carrier Horizontal milling unit (Position 1) Horizontal unit with two opposing outputs for milling and grooving. · Speed 9,000 – 18,000 rpm, continuously variable via inverter · 1 output for collet 3–20 mm (ER32) · 1 output for saw/collet 3–12 mm (ER20) (for saw D=120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER32): 50 mm · Saw blade arbor diameter (ER20): 12 mm Work table The work table is designed to guarantee the operator the maximum degree of freedom. The quick vacuum clamping system provides maximum flexibility for precise positioning and optimal holding of workpieces. · 6 supports, 1,000 mm, infinitely adjustable pneumatically in X · 12 round vacuum cups, D = 110 mm, infinitely adjustable in Y (2 per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total 6) · The retractable reference stops are CNC-controlled · Standard pendulum processing (2 working zones) --- Other clamping systems available as options --- Axis movement Kjdsx Iwc Sjpfx Abkjnf Drive system in X, Y and Z is via ground ball screws of the highest precision class. The ball s

Sąlyga: naujas, Tilting Spindle Moulder Simple and practical machining operations thanks to the ergonomic arrangement of controls on the front of the machine Digital display for height and tilt position of the spindle Spindle speed display Spindle rotation reversible (clockwise/anticlockwise) 8 speeds Spindle diameter: 30 mm Spindle clamping length: 125 mm Max. tool diameter under table: 240 x 80 mm Kodpecuwptefx Abkonf Extraction port diameter: 2 x 120 mm INCLUDES OPTIONS: 57.02.63 "LL" version for profiling work with 2 table extensions 57.03.30 Motorised height and angle adjustment of the working unit with digital displays 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switch 57.00.76 Fence with handwheel adjustment - Fence with stepless adjustment via handwheels easily accessible from the front: – Adjustment of the entire fence relative to the tool – Adjustment of the front ruler to change chip removal – Mechanical digital displays – Wooden fence jaws and connector bars Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Errors in technical details and prior sale reserved. • Stated prices are ex-location – free loading! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only answer enquiries that include your address and telephone number!)

Sąlyga: beveik kaip naujas (naudotas), darbinis plotis 1350 mm Knsdpfx Ajx Daz Hobkof kalibravimo agregatas su metaliniu volu kombinuotas agregatas su dviem gumos volais ir daugiasekciniais padais osciliacija su fotoelementais mašinos funkcijų aktyvavimas iš panelės juostos nupūtimas sklandus antrosios šlifavimo agregato juostos padavimo greičio reguliavimas daugiasekcinis padai su pneumatiniu reguliavimu gamybos metai: 2007 elektrinis stalo reguliavimas medžiagos storio matuoklis stalviršis su vakuumine fiksacija

Gamybos metai: 2008, Sąlyga: paruoštas naudoti (naudotas), Stalas Stalo ilgis: 2500 mm Pagrindinė pavara Veleno greitis: 8300 aps./min. Ši SCM Superset NTE pagaminta 2008 m. Tai tvirta naudota profiliavimo frezavimo staklė su jutikliniu valdymu, 6 velenais (įskaitant UNIWELLE), esant 8300 aps./min. veleno greičiui. Maksimali darbinė plotis – iki 240 mm, greitai keičiama Powerlock HSK 85 velenų sistema. Puikiai tinka tiksliems medienos apdirbimo darbams dėl gausios įrankių komplektacijos ir motorizuotų padavimo volelių. Daugiau informacijos apie šią staklę suteiksime susisiekus. Kedpfjx D Iwcjx Abkjnf Panaudojimo sritys Frezavimas (mediena)

Sąlyga: naudotas, Stalinė freza SCM T130 NPS - naudota - smulkiai reguliuojamas frezavimo tvartas, tarnavimo ir išpjovimo stalas, dešinė/kairė eiga ----- Techniniai duomenys ----- Stalo dydis: 1.080 x 750 mm, Veleno skersmuo: 30 mm, Greičiai: 3.000/4.500/6.000/7.000/10.000 aps./min., Kjdpfjw Nv Nfsx Abkenf Ištraukimo anga Ø: 120 mm, Apatinė ištraukimo anga Ø: 120 mm

Sąlyga: geras (naudotas), Gamybos metai: 2000, SCM M3 Track Multi-blade Saw No. 4 – Italian manufacture – Year of production: 2000 – Technical documentation included TECHNICAL SPECIFICATIONS: track width: 300 mm cutting height: 120 mm motor power: 25 kW max. blade diameter: 350 mm max. workpiece width: 1000 mm min. workpiece length: 400 mm feed speed adjustable via frequency inverter right-side fence pneumatically adjustable revolver fence setting – 6 types three rows of anti-kickback pawls option to fit board (shoe) Kjdjg Tdfdspfx Abkenf spindle diameter: 50 mm sleeve diameter: 70 mm sleeve equipped with spacers automatic central lubrication four upper feed rollers duct diameter: 180 mm and 120 mm machine dimensions (L/W/H): 210 / 175 / 160 cm weight: 1800 kg

Sąlyga: naudotas, Gamybos metai: 2023, Technical Data Working Area I.M.S. I.U. Working Area X Axis 5515 mm (217") Working Area Y Axis 1620 mm (63¾") Panel Passage Y 1900 mm (74¾") Panel Passage Z 250 mm (9¾") Workpiece Length for Pendulum Work 2600 + 2600 mm (102" + 102") X-Y Axis Traverse Speed PRO-SPACE: 56 m/min (184 ft/min) X-Y Axis Traverse Speed PRO-SPEED: 78 m/min (256 ft/min) * For further details, please refer to the respective machine layout. With a 5-axis motor, the working range in Y increases to 1680 mm (66") for the JQX motor or 1720 mm (67½") for KS/KT motors (maximum loadable panel width with horizontal drilling, electrospindle only in vertical position, intermediate reference stops not present). Installation Data I.M.S. I.U. Installed Power 23 – 28.5 KVA Electrical Specifications: 400 V, Voltage 50 Hz Frequency, 3 Phases Air Consumption 450 Nl/min Compressed Air Consumption 4500 m³/h (2650 CFM) Extraction Airflow Velocity 30 m/s Extraction Flange Diameter 250 mm (9.8") Noise Level VSA* LAV* During Drilling: 72.2 dB(A) / 74.6 dB(A) During Milling: 74.3 dB(A) / 80.7 dB(A) Standard Reference EN ISO 11202:1995 *VSA = without load and without extraction *LAV = in operation, with extraction Kodpfsxwht Dsx Abkonf Location: Nattheim

Sąlyga: naujas, Adjustment of the infeed worktable via parallelogram system Chip removal indication using degree scale Simultaneous height adjustment and locking of the worktables, complete with anti-tilt device Quick-change system for switching between surfacing and thicknessing operations (CE version) featuring a special support for opening the surfacing tables and an automatic pneumatic positioning system for the extraction hood, hydraulically assisted "READY" electronic control includes: – Thickness table adjustment Kedpfxed Akyzj Abkjnf – Manual, semi-automatic and automatic modes with 99 storable working programs – Additional features: calculator and operating hours counter Automatic star-delta start for main motor Machine table height adjustment via 4 steel threaded spindles Rubber-coated outfeed feed roller Replaceable feed rollers Segmented pressure shoes at infeed Planer cutterblock and setting gauge for planer knives Micro safety switches for correct positioning of the surfacing tables and extraction hoods Surfacing guard (CE version) Automatic motor brake on main motor Thermal protection switch Emergency stop switch Lockable main switch CE declaration of conformity Technical Data: Usable working width [mm]: 520 Total table length [mm]: 2310 Cutterblock diameter [mm]: 120 Motor power [kW]: 9.0, 50 Hz, 400 V Cutterblock speed [rpm]: 5000 4 knives [mm]: 35 x 3 x 520 Aluminum surfacing fence [mm]: 1200 x 190 Surfacing fence tilting range: from 90° to -45° Min./max. Planing height [mm]: 3 / 250 Thicknessing feed speed [m/min]: 5-8-12-18 Extraction hood diameter for surfacing [mm]: 120 Extraction hood diameter for thicknessing [mm]: 120 Including options: - "TERSA" cutterblock with disposable reversible knives - Tiltable auxiliary fence for thin workpieces

Sąlyga: naudotas, Gamybos metai: 2008, IDM Level HD is an industrial single-sided edge banding center designed for edge processing in standard furniture production. The HD model belongs to the machines with a more robust construction and is suitable where stable edge quality is required at higher feed speeds. This machine enables complete processing of the workpiece in a single pass operation – from pre-milling, gluing to the final edge finishing. Thanks to the modular arrangement of the working units, the machine can process ABS/PVC edges as well as veneer. The machine is used, fully cleaned, checked, and ready for installation. Technical equipment of the machine: Knjdpfx Ajxztmdebkef - Pre-milling unit – 2 counter-rotating motors, levelling the leading panel edge before edging - Gluing unit – EVA glue pot, electronic temperature control - Pressure zone – main pressure roller + subsequent pressure rollers - End trimming saws – 2 motors, clean trimming of edge faces - Upper and lower milling units – contour copying, precise trimming of ABS/PVC edges - Front corner rounding unit – radius machining of panel corners - Rear corner rounding unit – final corner finishing at the outfeed - Radius scrapers – final smoothing of the edge radius - Flat scrapers – finishing the edge surface - Buffing unit – 2 disks for final edge polishing - Complete extraction system – connection for all working units - Pneumatic pressure and adjustment – workpiece stability and precise regulation - Manual fine adjustment – readout dials and micrometric adjustments for precision settings

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2022, Papildoma įranga Anti-lipnumo purškimo įrenginys „AAR“ – komplektuojamas su 2 purkštuvais ir talpykla Purškimo sistema briaunos apdailai Ksdpfox D Rl Ajx Abksnf Viršutinis prispaudimas su transportavimo juosta Varikliai po 4 kW RT/E išankstinio frezavimo agregatui „SGP“ klijų konteineris su NC dozavimu Keraminės lempos su infraraudonaisiais spinduliais „MultiEdge“ įrenginys RI/S aplaidiniam frezavimo agregatui Ši SCM Stefani MD RM briaunų klijavimo staklė pagaminta 2022 m. Modelis pasižymi reguliuojamu grandinės padavimo greičiu nuo 10 iki 22 m/min ir apdirba briaunas iki 15 mm storio. Įrengta išankstinio frezavimo agregatu, klijų bloku su greito keitimo galimybe bei apipjovimo agregatu tiksliam briaunos užbaigimui. „Maestro active edge“ valdymo sistema užtikrina intuityvų valdymą ir optimalų našumą. Jei ieškote aukštos kokybės briaunų klijavimo galimybių, siūlome įsigyti pas mus esančias SCM Stefani MD RM stakles. Susisiekite dėl daugiau informacijos. Pritaikymo sritys Briaunų klijavimas

Sąlyga: naudotas, Storisavimo staklės SCM S 63 - naudotos - Segmentinė spaudimo sija, Volelis po stalu, Atskiras padavimo variklis ----- Techniniai duomenys ----- Obliavimo plotis: 630 mm, Peilių skaičius: 4 vnt., Prašalimo aukštis: 235 mm, Padavimo greitis: 6 /9/12/18 m/min., Ištraukimo antgalis Ø: 180 mm, Knodpfxexm R Uve Abkjf Svoris: 1035 kg

Sąlyga: naudotas, 1 vnt. kombinuota obliavimo-storintuvo staklės SCM FS410 su vamzdynu, pagal nuotraukas bei apžiūrą, savarankiškas išmontavimas. Spalva: pilka. Būklė: naudota. Apmokėjimo būdas: išankstinis pavedimas. Sandėliavimo vieta: stalių dirbtuvės/salė 2. Pristatymas: tik atsiėmimas vietoje – šiai prekei pristatymas nenumatytas! Knjdpfx Abox Ifgfskof

Sąlyga: naudotas, Gamybos metai: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS PROCESSING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY EASY PROGRAMMING "MATIC" WORKTABLE: SINGLE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHORM400 AXES Working area X-axis (reference side): 3,680 mm Working area Y-axis (max. loadable workpiece at rear stops): 1,680 mm Workpiece passage Z / Number of Z axes: 170 mm / 1 Workpiece length for pendulum operation: 1,650 mm Travel speed X-Y axes Pro-Speed: 85 m/min Z-axis speed: 30 m/min INSTALLATION Installed power: 62–82 KVA Compressed air requirement: 400 NL/min Extraction air requirement: 4,430 m³/h Extraction air velocity: 25 m/s Extraction port diameter: 250 mm GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with worktable and workpiece supports suitable for: - Vertical drilling on panel surfaces - Horizontal drilling on all four workpiece edges - Grooving with disc cutter - General milling operations (3-4-5 axes) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel, reinforced throughout the entire machine bed for extreme rigidity and stability through welded-in reinforcements. The table design with a large base is the key to ensuring permanent precision and stability. The machine layout offers the operator an optimal workflow with a minimal footprint. The moving gantry is built from a solid monoblock and is guided on prism-ground rails with ball-bearing carriages in the X-axis. The mobile unit carries the operating unit, which is also mounted on prism-ground rails and ball-bearing guides. AXIS MOVEMENT All axes move on large-cross-section linear prism guides with wide-bearing ball-bearing shoes to ensure optimal gliding even at the highest speeds and accelerations. The precise and fast positioning of the moving gantry (X-axis) is achieved via rack and pinion with helical teeth. Large-diameter ball screws ensure accurate positioning of the working unit along the moving gantry (Y and Z axes). MOTORS, DRIVES, AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are achieved with high-quality drives and brushless motors, sized for speeds up to 90 m/min, ensuring the best possible surface finish. Knjdpfx Aboxnldbokjf CONTROL SYSTEM The control unit consists of a numerical controller for milling and drilling with "Xilog Maestro" graphic interface on a Windows 7-based Office operating system: - 17" color LCD screen - QWERTY keyboard - Swiveling operator panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features: Programming - Parametric graphical programming - Import of DXF files (2D; geometries like "SPLINE", "POLYLINE 3D", straight or circular interpolation in three axes, linear in space, spiral in the chosen plane) - Supported programming with graphical and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Option to shift panel zero-point for drilling on slanted or curved panel edges

Sąlyga: naujas, Digital version with motorized thickness table adjustment • Helical-toothed steel infeed roller for consistent and even material feed • Material feed with two speeds • Especially long jointer tables enable easy and precise surfacing of workpieces • Work tables made of cast iron, annealed and stress-relieved, making them durable and permanently flat • Rearward, simultaneously opening jointer tables for short setup times • High machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical-toothed infeed roller (ideal for economical planing of precious hardwood) Technical Data: Working width: 410 mm Cutterhead diameter: 95 mm Max. chip removal: 5 mm Total jointer table length: 2200 mm Thickness table dimensions: 410 x 775 mm Feed speed thickness table: 6/12 m/min Knodpsdvn Hwefx Abkef Min. ÷ max. working height of thickness table: 3 ÷ 240 mm Min. working length thicknessing: 180 mm Motor power: 5.0 kW, 400V, 50 Hz Including the following options: • Motorized thickness table height adjustment with digital display • Fold-away auxiliary fence for thin workpieces • TERSA cutterhead

Sąlyga: labai geros būklės (naudotas), working width 520 mm 4-knife cutterblock star/delta start mechanical table adjustment variable feed speed cutterblock speed 4500 rpm Kodei Ewyhspfx Abkjnf table-integrated feed roller

Sąlyga: naudotas, Gamybos metai: 1999, 1 vnt. stalinis frezavimo staklės SCM T130N, su vamzdynu ir įvairiais priedais pagal nuotraukas ir apžiūrą, savarankiškas išardymas Spalva: pilka Knjdox Iffuspfx Abkjf Pagaminimo metai: 1999 Būklė: naudotas Apmokėjimo būdas: išankstinis banko pavedimas Prekės sandėliavimo vieta: stalių dirbtuvės/Salė2 Siuntimas: Tik savarankiškas atsiėmimas – šiai prekei siuntimas nesiūlomas!

Sąlyga: naujas, Particularly long jointer tables (2250 mm) made from a single piece allow for easy straightening of workpieces. - Work tables are made of cast iron, stress-relieved and tension-free, making them highly resistant and permanently flat. - Simultaneous opening & closing of the jointer tables with a single locking mechanism. - High-performance industrial motor. - Fixed mounted extraction hood. - Robust steel/cast iron construction. - Large jointer fence 1200 x 150 mm (standard with auxiliary fence). - Material feed with four speeds via separate motor. - Thicknessing table is lifted on 4 robust columns protected by dust bellows. - Helical feed roller on thickness planer. - Rubber outfeed roller at the outlet of the thickness planer. - Preparation for slot mortising unit. - Digital display for thicknessing height position (1/10 mm). - Automatic star-delta switching. Technical data: Total table length: 2250 mm Working width: 520 mm Max. depth of cut: 5 mm Thicknessing table dimensions: 850 x 520 mm Min/max. working height: 3/240 mm Feed speeds: 5/8/12/18 m/min Cutter block diameter/cutting knives: 120 mm/with 4 HSS knives Kedpscq E Uujfx Abkenf Speed: 5000 rpm Self-braking motor: 400 V/50 Hz/S6 – 40% 7.0 kW Extraction port diameter: 1 x 120 mm Weight: approx. 650 kg Including options: - “Teresa” cutter block Ø 120 mm, monoblock, with 4 quick-release knives - Additional auxiliary fence for thin workpieces - Motorized height adjustment of the thicknessing table with digital display - Thicknessing table with 2 swing-away idle rollers

Sąlyga: naujas, Working width (finished dimension) 23 – 180 mm Working height (finished dimension) 6 – 105 mm Min. length of individual workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindle 1 x 7.5 kW Spindle speed 6000 rpm Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Knedpfx Absiiv Dcokef Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Loose roller integrated in outfeed table Extraction diameter 4 x 120 mm Including OPTIONS - Motor-driven feed roller before the jointer with lever for quick adjustment - Front vertical pressure unit before the left vertical spindle - Infeed table length 2300 mm - Tool package consisting of 4 planing heads and one edge-jointing cutter

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Multi-spindle moulder with 9 spindles and SCM Control 100 PC control for all spindles Max. working width: 240 mm Min. working width: 25 mm Max. working height: 120 mm Min. working height: 10 mm Minimum workpiece length: 640 mm Feed speed: 6 - 36 m/min, variable Spindle speed: 6000/8300 rpm Spindle diameter: 40 mm Usable length of vertical spindles: 140 mm Usable length of horizontal spindles: 250 mm Axial adjustment of vertical spindles relative to worktable: 0 - 80 mm Axial adjustment of horizontal spindles to the right guide: 0 - 45 mm Min. and max. diameter of profile tools: 100 - 220 mm Min. and max. diameter of tools on the planing spindle: 120 - 140 mm Profile capacity of the second lower horizontal spindle with tool Ø 200 mm = 15 mm Feed motor power: 5.5 kW Feed roller diameter: 140 mm Infeed table length: 2,500 mm Quick adjustment of infeed table and guide: 10 mm Extraction capacity: 7,500 m³/h Compressed air supply: 6 – 10 bar Weight: 6,000 kg Dimensions L x W x H = 6300 x 1620 x 1655 mm Spindle arrangement: Lower horizontal spindle: Motor power: 11.0 kW Spindle speed: 6,000 rpm Right vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm Left vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm 2nd right vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm 2nd left vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm Upper horizontal spindle: Motor power: 11.0 kW Spindle speed: 8,300 rpm 2nd lower horizontal spindle: Motor power: 12.0 kW Spindle speed: 8,300 rpm 2nd upper horizontal spindle: Motor power: 11.0 kW Spindle speed: 8,300 rpm 3rd lower horizontal spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm Kodpfx Abjg Umrmokenf SET-UP quick adjustment system Worktables with fine adjustment of all units via Control 100 PC control Axial travel of vertical spindle 80 mm for large tool diameters Pneumatically operated full safety cabin Feed system with universal joint drive Infinitely variable feed speed Motorized height adjustment of feed system and spindles with independent control Segmented pressure shoes after the upper horizontal spindles Fine adjustment of outfeed table Pneumatic device for spindle locking in working position Automatically adjustable left vertical spindle Including ZIWO CL 15 automatic loader Note on used machinery: • Technical data and prior sale subject to change. • All prices quoted are ex-site – loaded free of charge! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Sąlyga: naujas, The best-selling edge banding machine in its class with an unrivaled price-performance ratio. SCM edge banding machine for plastic edging from 0.4 - 3 mm and solid wood edging up to 5 mm, equipped with a new corner rounding unit. Edgebanding thickness for roll material: 0.4 - 3 mm Maximum edgebanding thickness for strip material: 5 mm Min. – max. workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9,000 rpm Glue pot: 0.18 kW, 0.8 kg capacity Saw cross-cut unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL FEATURES Knsdpfx Abjc S Di Rjkof Radius scraper Flat scraper Grooving unit: 1.1 kW, 12,000 rpm, groove width 4mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heated infeed fence Glue pot quick-change system ...