Scheer Pjūklas pirkti naudotą (68)

Sąlyga: naudotas, Naudota mašinaPjovimo ilgis 3000 mmrankinio rato įtempimasPrieinamumas: trumpas terminasSandėliavimo vieta: Solingenas Gsdow I Uhdepfx Aczett

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, Stair Stringer Milling Device SCHEER TW 4-2 + Router HM 18E Everything is in visually and technically excellent, as-new condition. Everything works flawlessly. The device comes from a hobby carpenter and, for this reason, has been used very little and is still like new. You can start work with it immediately. All machines are from the year 1998. These are all machines intended for commercial use, not DIY store junk. Gtodsxbt Ubjpfx Aczst Stair Stringer Milling Device SCHEER TW 4-2 Allows for very precise and accurate milling of treads and risers With the hand crank, you can even process curved joint surfaces Equipped with hardened guide shafts on which the cross slide with router is mounted With ball bearing guide bushes, allowing the device to move very smoothly, accurately, and safely With 2 quick-release clamps for securely fastening the device to the stringer Cross slide features 2 stops each in longitudinal and transverse direction Includes 2 angle stops Includes user manual Milling travel: 750 mm longitudinal, 75 mm transverse Router SCHEER HM 18E In excellent condition, almost no signs of use Very robust due to triple-supported milling spindle Precise concentricity and flawless milling pattern Precision column guidance and torsion-resistant router table Constant speed even under heavy load High-performance motor (hardly any signs of fatigue) Long service life due to soft start (full-wave electronics) Bearings are in good condition Machine is suitable for heavy-duty continuous milling work Good visibility of milling spindle, chips are blown away by a powerful fan Numerous optional accessories for grooving, edging, doweling, dovetailing, etc., are available for this machine 220V, 2000W Speed adjustable from 10,000 to 18,000 rpm Works flawlessly With M16 female mount (adapters and other mounts can be ordered separately) Includes 30mm pilot ring and extraction hood

Gamybos metai: 1983, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 508323, 21-spindle, 32 mm pitch Tool holder M 10 external thread Maximum spindle distance: 640 mm Maximum portal opening: 1056 mm Stop length: 2500 mm with 4 swiveling stops Drilling unit with 2.2 kW motor Godpfx Aodardxjczott Drill head swiveling, drilling from below Height adjustment max. 80 mm Max. drilling depth: 80 mm Available from location Seevetal, as inspected Subject to prior sale

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 690924, Connected load: 380V 1.84kW Speed: 2840 rpm Number of spindles: 21 units, 32 mm pitch Spindle spacing: 640 mm Spindle rotation direction: 11x right-hand, 10x left-hand, M10 thread 2x safety clamps Pneumatic foot switch Table size: 880 x 400 mm 1x side stop with 2 flip stops Gtodpfeh U Damox Aczst 1x base stop 1x mitre stop Unfortunately, we are unable to respond to inquiries without complete contact details.

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Cutting rotor for a strand pelletizer Manufacturer: MAAG / Scheer Gjdpfx Ajpgulwjczstt - Cutting rotor width: 200 mm - Completely overhauled - Excellent condition

Sąlyga: naudotas, Gamybos metai: 1983, with 2 drilling beams Gsdpfovwf N Hjx Aczjtt used, in good condition Brand: Scheer Model: DB 3 Year of manufacture: 1983 Machine no.: 83120 Number of spindles: 25 units Number of drilling beams: 2 Spindle spacing / pitch: 32 mm Drilling from above Hydraulic feed brake: 2 units Stop ruler: 1 unit approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 strokes Drill holder: M 10 Swing stops: 3 units Clamps: 3 units Drilling programs: 4 units Space requirement: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in the current condition as inspected, without overhaul, without warranty or guarantee

Sąlyga: naudotas, Used machine Used veneer saw by Scheer, model FM 2 - 3000 Clamping via manual handwheel Integrated extraction system Cutting length: 3000 mm Gjdewka Rdspfx Aczott Movable Availability: short-term Location: Röllbach

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, gręžimo gylis: 45 mm, sukimosi greitis (maks.): 18 000 aps./min, sukimosi greitis (min.): 9 000 aps./min, veleno greitis (maks.): 18 000 aps./min, veleno greitis (min.): 9 000 aps./min, suslėgto oro jungtis: 7 juosta, įėjimo įtampa: 400 V, darbinis plotis: 1 200 mm, eigos ilgis: 50 mm, aukščio reguliavimo tipas: elektrinis, įėjimo dažnis: 50 Hz, tvirtinimo skersmuo: 10 mm, galia: 1,5 kW (2,04 AG), Dowel Hole Drilling and Inserting Machine SCHEER BS 5102 The BS 5102 is a high-quality, electronically controlled drilling and dowel inserting machine designed for precise end-face drilling operations and powerful dowel insertion. It is ideally suited for industrial continuous operation in joineries, furniture, and carcass manufacturing. Condition & Service: Condition: Overhauled & newly painted Functionality: Fully operational Warranty: 12 months CE-compliant / dust-tested Main Technical Data & Features: Workpiece width: 60 – 1200 mm (pendulum operation up to 600 mm) Workpiece thickness: 15 – 60 mm Vertical stroke: 7.5 – 50 mm Drilling depth: max. 45 mm Drill motor: 1.5 kW, adjustable 9,000 – 18,000 rpm Drilling system: M10 external (Scheer system) Clamping cylinders: 4 angled short-stroke cylinders (Ø 63 mm) Voltage: 400 V, 50 Hz Glue system: 1:1 membrane pump, max. 7 bar Extraction connection: Ø 80 mm | Air volume: 540 m³/h Equipment & Operator Comfort: Drilling, dowel insertion, or both simultaneously – for maximum flexibility Gtjdjwrnn Tjpfx Aczjt PLC-controlled glue quantity – precisely adjustable Controlled X-axis with linear guide, rack drive, and servomotor Drill motor, glue applicator, and dowel insertion unit are standard Adjustable drilling depth & dowel projection directly at the support Clamping portal with 4 adjustable clamping cylinders – exact workpiece positioning Stop rulers left, right, and center on the machine table Large support surface for safe and flexible workpiece handling Control & Programming: Siemens PLC control with PC and WP-Studio software Operating system: Windows 10 Display: 17" color monitor Dialog-oriented, graphically supported operation Automatic mirroring of workpiece programs (left/right) Workpiece and glue data programmable Optional Features: Electronic glue monitoring Inspection mirror for visual monitoring of the spiral feeder Additional drill motor for surface drilling available on request Warranty & Reliability: We are convinced of the quality and durability of our machines — that is why you receive a 7-year warranty on the machine construction, especially on the frame and guiding mechanics. Excluded are electrical supplier parts and wear parts. Conclusion: This machine combines precision, modern control technology, and high build quality. Perfectly suited for operations valuing reliability, efficiency, and operator comfort. 📞 Contact us for an individual offer or to arrange a demonstration appointment. Machine available from stock. Delivery, commissioning, and training are available optionally.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus,

Sąlyga: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 508678, gręžimo gylis: 80 mm, bendras plotis: 820 mm, bendras ilgis: 1 350 mm, bendras aukštis: 1 400 mm, bendras svoris: 450 kg, ašies skaičius: 21, galia: 2,2 kW (2,99 AG), Universal dowel hole and line boring machine, dowel hole drilling machine, dowel boring machine Manufacturer: Scheer Year of manufacture: 1989 Gtodpfx Ajwuuxksczot Model: DB-5 Weight approx.: 450 kg Machine number: 508678 Dimensions: 1350 mm x 820 mm x H 1400 mm Drilling beam length: 640 mm Spindle spacing min. 32 mm, max. 640 mm 21 spindles Drilling depth: 80 mm Drilling beam pneumatically swiveling Motor power: 2.2 kW

Sąlyga: naudotas, Type: DB 5 Condition: function-tested, very good, used - Boring head with 21 spindles, 32 mm pitch - Unit swivels up to 90 degrees - 2.2 kW motor - Max. drilling depth 80 mm - complete stop system Gtsdeu Inu Rjpfx Aczet

Sąlyga: naudotas, Gamybos metai: 1980, used Manufacturer: Scheer Type: DB 5 Year of manufacture: 1980 Machine no.: 508054 Number of spindles: 21 pcs Number of drilling beams: 1 Bottom drilling Manually tiltable Working width: 800 mm Drilling depth: 80 mm Clamps: 2 pcs Gtsdjvwfuvopfx Aczet Pitch: 32 mm Required space approx. LxWxH: 1200 x 800 x 1300 mm Weight approx.: 300 kg Total connected load: 2.2 kW Location: 97447 Gerolzhofen Delivery in as-is condition as inspected - free loaded -

Sąlyga: naudotas, Naudota mašina Būklė: pagal amžių Efektyviam kaiščių skylių gręžimui išilginiuose ir skersiniuose frezuotuose elementuose rėminėms durims, durų apdailoms, stalčių dalims, įvairaus tipo traversoms Variklis su 3 velenais Velenų atstumas 25/25 mm Gtjdpow Nabxjfx Aczet Didžiausias eiga 80 mm Variklis 1,5 AG Atraminis stalas 260 x 130 mm Aukščio reguliavimas nuo 5 iki 40 mm pagal skalę Su perjungiamu lankstomu ribotuvu Valdymas kojiniu pedalu Šiaurės Reinas-Vestfalija

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Dowel Hole Boring and Insertion Machine SCHEER BS 5102-V The BS 5102-V is a high-performance, electronically controlled machine for precise and efficient end-grain drilling as well as the accurate insertion of wooden dowels. It is ideally suited for industrial wood processing—especially in furniture and carcass production. Condition & Service: Condition: As new (completely overhauled & newly painted) Functionality: Fully operational Warranty: 12 months CE compliant / Dust tested Main Technical Data & Equipment: Workpiece width: min. 60 mm / max. 1200 mm (pendulum operation: max. 600 mm) Workpiece thickness: 15 – 60 mm Drilling depth: max. 45 mm Vertical support stroke: 7.5 – 50 mm Min. lateral drilling distance: 10 mm Drilling unit: 9,000 – 18,000 rpm (adjustable), 1.5 kW Gtjdpfx Ajunvg Tsczet Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Form A Glue system: 1:1 membrane pump, max. 7 bar Glue tank: Spiral conveyor, 3.5 liter capacity Extraction port: Ø 80 mm | Extraction air volume: 540 m³/h at 30 m/s Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), angled clamping Power supply: 400 V, 50 Hz Machine Structure & Operator Comfort: Controlled X-axis with machine stand as a workpiece support X-support with linear guide and rack-and-pinion drive Servo drive for the feed system Clamping portal with 4 adjustable clamping cylinders – controllable in 2 groups Stop rulers: left, right, and center on the table Drilling depth and dowel projection adjustable directly on the support Residual Cut-Off Device & Safety Systems: Protective hood interlock Lamella safety curtain Integrated extraction channels Control & Operation: PC with Siemens PLC control Operating interface: WP-Studio – dialog-based programming Operating system: Windows 10 Display: 17" color screen Separate workpiece programs for left & right control panel (mirrored) Glue quantity individually definable per program Networkable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue units Electronic glue monitoring: guarantees controlled glue flow Additional drilling unit for surface drilling: Drill motor: 1.5 kW at 18,000 rpm Drill feed: pneumatic Drill stroke: max. 25 mm Depth limiter: via spindle & SIKO display Drill distance to reference edge: 5 – 35 mm Mounting: M10 external, max. Ø 35 mm Workpiece length: min. 70 / 90 mm Warranty & Reliability: We are convinced of the stability and manufacturing quality of our machines – that's why you receive a 7-year warranty on the machine construction, especially on the supporting frame and guide mechanism. Electrical supply parts as well as regular wear parts are excluded. Additionally, we grant a 1-year warranty on the complete machine (incl. control system, hydraulics, pneumatics etc.). Conclusion: This machine combines state-of-the-art control technology, high build quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient for continuous operation. 📞 Contact us for a tailor-made offer or to arrange a demonstration appointment. Machine available from stock. Delivery, commissioning, and training optionally available.

Sąlyga: naudotas, Gamybos metai: 1985, Scheer DB5 Line Boring Machine Year of manufacture: 1985 Gtodpfxewv Uy Do Aczet - 380 Volt - 21 spindles; 32 mm pitch - Stop ruler - Various dowel drills included - Portal passage: 1056 mm - 2.2 kW

Sąlyga: naudotas, Gamybos metai: 1975, used line boring machine Model: Scheer DB 20 Table size: 1400 x 630 mm 1 drilling beam with 21 spindles, 32 mm pitch Height adjustment: 40–100 mm Gjdperi R Haofx Aczett Maximum spindle spacing: 640 mm Working length: 700 mm per cycle Maximum workpiece length (by repositioning): 2656 mm Throat/depth: 550 mm Motor power: 1.8 kW 1 stop rail with adjustable stops Weight: approx. 240 kg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1996, veikimo valandos: 350 h, Funkcionalumas: visiškai funkcionalus, Universal Dowel Hole Boring Machine DB 4 This used SCHEER Universal Dowel Hole Boring Machine DB 4 has been function-tested (not newly repainted). All worn parts and seals have been replaced, and the machine geometry was re-adjusted to ensure maximum precision. The SCHEER Universal Dowel Hole Boring Machine DB 4 is specially designed for structural drilling, row drilling in the 32 mm pitch system, and for drilling various types of fittings; it enables all of these tasks to be carried out quickly, precisely, and with minimal setup times. Operation is straightforward via symbols and a 4-position program pre-selection control, allowing changeover to new work operations in seconds. Central adjustment of the removable side stops ensures that workpieces are always flush with the front edge, allowing for precise drilling of left and right workpieces. It does not matter whether parts are cut to exact dimensions or at right angles. Corner joints with dowels are always flush both at the edge and on the face—something that even CNC machines can hardly achieve with the ease and speed of a SCHEER DB 4. Safety clamping system across the entire table width holds the workpieces directly beneath the drilling beam. The guide rail has three adjustable flip stops. Continuous table supports make feeding and drilling long workpieces easier, while fold-up workpiece support tables facilitate row and fitting hole drilling. 2 drilling units Drilling motors: Type BM 602-230/400 Volt, 50 Hz, n = 2860 rpm, 2.2 kW output 25-spindle gearbox Spindle pitch 32 mm (other spindle pitches upon request) For surface and end-face drilling. The vertical drilling unit is equipped with an oil brake for tear-free through-hole drilling in row drilling operations. The machine's control cabinet has been completely rebuilt and upgraded to the new SIEMENS LOGO! control system, ensuring the long-term operational safety of the machine. Gantry passage: max. 950 mm Working length: Gtjdjwq S E Hepfx Aczjt max. 2360 mm With pneumatic rack adjustment.

Sąlyga: labai geros būklės (naudotas), Doweling machine DB12 1.1 kW 8 mm stroke Gedswmbpmspfx Aczstt 3 spindles