Rung Rėmas pirkti naudotą (4 614)

Būklė: naudotas, Single-column hydraulic press DUNKES Type HZT 2.5 Machine No. H94-2558 Year of manufacture: 1994 Press force: 2.5 tons Throat depth: 180 mm Table size: 420 x 300 mm Table opening: 60 x 185 mm Ram area: Ø 40 mm Clamping pin bore: Ø 20 mm Ram stroke: 160 mm Max. installation height: 250 mm Rapid downstroke: 65 mm/sec Rapid upstroke: 160 mm/sec Working speed: 8.3 mm/sec Table height above floor: 950 mm Hydraulic operating pressure: 135 bar Hydraulic tank capacity: approx. 100 liters Djdpeh Uhqysfx Aaiskr Drive power: 1.5 kW Mains connection: 400 Volt, 50 Hz - Installation height can be increased by 80 mm by shortening the piston rod - Pressure and stroke shut-off - Two-hand operation at the machine - Stroke counter - Safe press control system with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for hand feeding operations) - 32,047 observed operating hours - Electrical and hydraulic schematics available Space requirement (L x W x H): 1100 x 980 x 1950 mm Weight: 700 kg Very good condition.

Būklė: naudotas, Clamping plate, machine table with metal base Clamping table, assembly table, clamping angle Djdpfx Ajwkvi Nsaijkr Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - T-slot table was previously a machine table from a milling machine - 4 T-slots, 16 mm - Metal base with height-adjustable feet - Multi-layer wooden panel L x W x H: 1200 x 400 x 18 mm Overall dimensions L x W x H: 1400 x 770 x 870 mm Weight: 250 kg Good condition

Būklė: naudotas, Single-column hydraulic press, straightening press, C-frame press ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Model RSD 1500 - 125 Machine No. 317 / 690, year of manufacture approx. 1986 Pressing force: 150 tons Throat depth: 125 mm Ram stroke: 35 mm Table size: 280 x 210 mm Ram surface: Ø 125 mm Installation height (ram to table): max. 265 mm Table height above floor: 403 mm Hydraulic operating pressure: max. 500 bar - Without hydraulic power pack - Ram surface with 4 threads M16 and 20 mm guide groove, center locating hole Ø 15 mm Dsdsd Swtaepfx Aaiekr - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Required space L x W x H: 700 x 300 x 1450 mm Weight: 1250 kg Good condition

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Cutting capacity at 0° round (pipe): 300 mm Dkjdpexz Dqmefx Aaisr Cutting capacity at 0° round (solid): 180 mm Cutting capacity at 0° rectangular flat (hollow section): 320 x 290 mm Cutting capacity at 0° bundle (pipe): 320 x 160 mm Cutting capacity at -45° round (pipe): 300 mm Cutting capacity at -45° round (solid): 110 mm Cutting capacity at -45° rectangular flat (hollow section): 300 x 280 mm Cutting capacity at -60° round (pipe): 200 mm Cutting capacity at -60° round (solid): 80 mm Cutting capacity at -60° rectangular flat (hollow section): 190 x 200 mm Cutting capacity at +45° round (pipe): 270 mm Cutting capacity at +45° round (solid): 110 mm Cutting capacity at +45° rectangular flat (hollow section): 270 x 200 mm Table height material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20–100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic pivoting-frame metal bandsaw • After starting the cutting cycle, the vice clamps automatically – once the process is complete, it returns to the starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for sawing e.g. stainless steel, tool steel, hollow sections, and solid materials • With fully hydraulic sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Equipped with a robust three-phase motor • Motor fitted with overload protection • Ball-bearing turntable • Saw arm inclined by 25° for increased blade service life • Pivoting saw arm, adjustable from +60° to -45° • Equipped with a chip removal brush for optimal blade cleaning and maintenance • With frequency inverter: allows stepless adjustment of saw blade speed from 20 to 100 m/min • BRP – saw blade monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control the upper and lower positions of the saw arm • No need to set the upper end position • Length stop with scale, left-side removal 3 m • Cut initiation sensor • Swivelling control panel • Micro-spray device • 2x roller conveyors: 3 m removal left, 6 m material feed right • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Būklė: naujas, 4 klijavimo strypai, 1 prispaudimo sija, hidraulinė, su mechaniniu rėmo spaudimo įrenginiu. Išoriniai matmenys (Ilgis x Aukštis): 3000x2000 mm, apie 200 kg. Dkodpfxovrv H So Aaier

Būklė: geras (naudotas), Pasiūlymas 25348 Dkedpfxoy Nl A Ao Aaior Techniniai duomenys: - 15 vnt. 300 x 200 x 100 mm - Kairės ir dešinės pusės variantai - Bendras svoris apie 250 kg

Būklė: geras (naudotas), Gamybos metai: 1996, abišalinis viršaus-apačios šlifavimas su šlifavimo padu ir dulkių šepečiu maks. šlifavimo plotis 300 mm maks. šlifavimo aukštis 200 mm gamybos metai 1994 su CE ženklinimu Djdpfexfl Easx Aaiokr

Gamybos metai: 1972, būklė: naudotas, Working length up to: 3900 mm Hydraulic drive: 220/380 V, 1400 rpm, 0.75 kW Djdpebnnyisfx Aaiokr Space requirement: 600 x 4650 x 1000 mm Weight: approx. 250 kg in mobile design

Būklė: naudotas, mašinos/transporto priemonės numeris: 478, Pressing force: 36 t Dkedpfx Asbb Tgueaior Max. installation height: 135 mm electrical connection: 380 V, 7.5 kW Space requirement: 1700 x 700 x 2150 mm Weight: 1800 kg

Būklė: naujas, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electro-hydraulic frame press machine, type Super Options: Working widths from 3,000 mm up to 5,000 mm Working heights from 2,000 mm up to 3,000 mm Optional equipment such as center pressure beam, tilting sash device, counter profiles for single-part production, and much more! Please request our complete price list! Description: With automatic adjustment for mortise and tenon corner joints (other corner joints available as option), CE specification The only fully automatic, self-adjusting high-performance frame press in which pre-positioning of the timber components is not required. Width and height adjustments are made automatically, without any time loss, immediately after direct insertion of the workpieces into the pressing area. No repositioning of the timbers is necessary. Base machine features a heavy-duty welded frame construction using oversized, thick-walled special profiles. Guideways of the press corners on the pressure beams are designed for minimal wear. Continuous counter bearing on the stop side for width pressing, built in a torsion-resistant design, mounted to the machine base. Continuous lower counter bearing in extremely robust, torsion-resistant design, connected to both the base frame and the machine. Insertion height 500 mm. All counter bearings are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on the right with rapid, motorized width adjustment, guaranteeing parallel travel, includes automatic hydraulic locking: Central drive for dimension adjustment both horizontally and vertically, with high adjustment and travel speed, and automatic width and height adjustment (opto-electronically controlled). 2 double-acting vertical pressure cylinders, piston diameter 50 mm, 250 mm stroke, adjustable pressure force from 400 to 2000 kg. 2 double-acting horizontal pressure cylinders, piston diameter 40 mm, 80 mm stroke, adjustable pressure force from 250 to 1250 kg. Upper right press corners, heavy-duty, machined design with automatic corner positioning. Floating press corners Contact surfaces with adhesive-repellent finish. Counterbearing and pressure plate depth 100 mm. 8-way holding and positioning device for completely loose insertion of all single timber pieces into the press area (no pre-arranging or pre-positioning required). Each frame element is held and positioned twice. Djdpfxed Rzc Re Aaiskr Automatic lifting function allows for ergonomic insertion of the upper transverse timber on tall frames at a user-friendly height. Increases work safety by enabling floor-level operation—no ladders or steps required. All frame members are placed directly into the pressing area. Program selection options: Manual, motor-driven via pushbutton, Fully automatic via optoelectronic measurement, including automatic pressing cycle combined with safety light barrier. Automatic, cycle-controlled pressing sequence via pulse input: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing. Control cabinet mounted on the left side of the base frame for easy servicing. Fast, optoelectronic dimension adjustment. Compact hydraulic unit, adjustable from 20 to 100 bar. Freely programmable electric manual control for efficient operation, especially with large or complex frame assemblies (...

Būklė: naudotas, Gamybos metai: 2002, Frame material: stainless steel/plastic/aluminium Height: 2800 mm Length: 14800 mm Depth: 1800 mm Dodpfx Aasw Dpx Dsijkr Weight: approx. 3580 kg Condition: good/used

Būklė: paruoštas naudoti (naudotas), A Seitz filter machine including Schenk dosing unit for beer production is available. 1) Kieselguhr frame filter Seitz Orion 60, max. flow rate: 70hl-80hl/h, effective flow rate: approx. 45hl/h, max. total filtration capacity: approx. 600hl, pressing mechanism: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions (W/H): 600mm/600mm, pipe diameter: 50mm, nominal width: NW50, machine dimensions (L/W/H): approx. 3800mm/1100mm/1400mm. 2) Schenk dosing unit DO-S120, year of manufacture: 1971, capacity: approx. 160l/h, high-speed capacity: approx. 320l/h, nominal width: NW50, pipe diameter: 50mm. Documentation available. On-site inspection possible. Dkjdpfxswd Talo Aaier

Būklė: labai geros būklės (naudotas), 5 vnt., A formos rėmas, atrama kiekvienoje pusėje: 390 mm Išoriniai matmenys: Plotis: 2420 mm Dodpfoxat Ulex Aaiskr Gylis: 1360 mm Aukštis: 2530 mm

Būklė: geras (naudotas), Gamybos metai: 1995, Įsk. lankstymo įrankį Dksdpfxjxm Tn Eo Aaier Įrenginys gali: aliuminį, Chromatec/Niro. Tinka formoms ir modeliams. 4 skyrių profilių žurnalas. Bendras ilgis: 12000 mm Maks. aukštis: 2760 mm Gylis: apie 2000 mm Svoris: apie 2500 kg

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 60.11.563, Tai yra Rational pakabinamas rėmas Combi Rack, tipas 10-1/1, skirtas iCombi Pro ir iCombi Classic 10-1/1 modeliams. Naudojant šį pakabinamą rėmą galima naudoti tiek kepimo standartą atitinkančias 600x400 mm skardas, tiek gastronorm skardas. Gamintojo rekomenduojama kaina: 599 € be PVM. Nurodyta kaina yra su PVM (19%) – (be PVM: 494,96 €). MŪSŲ PASLAUGOS JUMS: • Aukštos kokybės firminė įranga už sąžiningą kainą • Profesionalus atnaujinimas, inspektavimas ir kruopštus valymas • Patikrinta ir visiškai veikianti – arba pinigų grąžinimas • Lankstus siuntimas arba atsiėmimas • Kompetentinga konsultacija prieš ir po pirkimo • Instrukcijų, prijungimo schemų ir atsarginių dalių tiekimas • Atitiktis DGUV V3 sertifikatui Dkjdpfx Aew Svavjaior PREKĖS NUMERIS: 60.11.563 Būklė: nauja PRISTATYMAS: • Pristatymas arba atsiėmimas pagal susitarimą • Siuntimas visame pasaulyje pagal užklausą • Pristatymas į salas ar kalnų stotis tik pagal susitarimą

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, This is an undercounter cabinet, UG II type Bakers’ standard, manufactured by Rational. The cabinet is suitable for Rational combi steamers of the iCombi series, sizes 6-1/1 and 10-1/1. The stand features 14 slots designed for baker’s standard 400x600 mm trays. The listed price is net plus 19% VAT. Looking for a specific Rational appliance model? Contact us—we have access to a wide range of new and used units. We are happy to advise you on all types of equipment, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: - High-quality branded equipment at fair prices - Professionally refurbished / inspected & expertly cleaned - Tested & fully functional – or your money back - Flexible shipping or self-collection options - Competent advice – before and after your purchase - Provision of operating manuals, wiring diagrams & spare parts - Inspection according to DGUV V3 Technical data: - Dimensions (W x D x H): 860 x 703 x 699 mm - 14 pairs of support rails, 400x600 mm - Covered top and sides - Open at the front and rear Condition: Very good used condition Shipping: - Delivery or self-collection by arrangement - Worldwide shipping available on request Dkjdpsvclc Djfx Aaier - Shipping to islands or mountain stations only by arrangement If you have any questions, would like advice, or wish to view the item onsite, you can reach us by phone during our business hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is subject exclusively to our General Terms and Conditions (GTC).

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), Ruchser roller conveyor for windows with 90° rotation device left/right, length 4400mm Dsdpfolpcc Isx Aaijkr Electrically driven accumulation rollers with 2 parallel support sections, pneumatically tiltable from vertical 7° outside to vertical 7° inside. Support sections 1900mm high with rubber roller strips. Between the rubber strips, stainless steel plates 2mm lower serve as a gliding surface with clip holders. Infeed and outfeed with edge protection rollers up to 3000mm high using rubber rollers. Infeed conveyor 2000mm, outfeed conveyor 4000mm with driven accumulation rollers. Control system and operator panel mounted on a freely adjustable stand.

Būklė: naudotas, Gamybos metai: 1950, Spaudimas 500 t Statramsčių atstumas 1600 mm Eiga 60 mm Didž. stūmoklio eiga 60 k./min Stūmoklio reguliavimas 100 mm Įrengimo aukštis 700 mm Stalo paviršius 1600x1400 mm Stūmoklio paviršius 1400x1150 mm Mašinos svoris apie 40 t Techniniai duomenys pateikti gamintojo arba eksploatuotojo, todėl yra informacinio pobūdžio. Tarpinis pardavimas galimas; galioja tik mūsų bendrosios verslo ir pardavimo sąlygos. Apie mus Daugiau nei 400 nuosavų mašinų sandėlyje Daugiau nei 15 000 m² sandėliavimo ploto, krano keliamoji galia 70 t Daugiau nei 10 000 priedų jūsų dirbtuvėms Jei norite parduoti mašinas, gamybos linijas ar savo įmonę – susisiekite su mumis. Daugiau pasiūlymų rasite mūsų interneto svetainėje. Apžiūra galima susitarus iš anksto. Laukiame jūsų apsilankymo! Jūsų Markus Hirsch komanda Dkodpfxeyutvyj Aaisr

Būklė: naujas, Technical Data • System: for frame assembly • Minimum frame outer dimensions (mm): 120 x 120 Dkjdpfofiqllox Aaijr • Maximum frame outer dimensions (mm): 700 x 2200 • System length (mm): 2750 • System width (mm): 1250 • System height (mm): 900 • Custom sizes: available Machine Features • Precisely aligned assembly of frame rails prevents any shifting of the mitre surfaces • Manual alignment of frame rails is not required • Cost-effective frame production through automation • No fixture-based limitation of frame dimensions • Popular methods for joining frame mitres can be utilized • Minimal footprint due to compact design • Simultaneous gluing of the center layer possible • Complete fronts can be glued in a single operation

Būklė: naudotas, Gamybos metai: 2000, For fully automatic assembly of frame components. Dedod H Irfspfx Aaiskr Frame external dimensions: min. 120 x 120 mm, max. 1050 x 2,500 mm 2 heating rails

Būklė: geras (naudotas), For the fully automatic assembly of frame components. Dksdpodhdg Iefx Aaior Frame outer dimensions: min. 120 x 120 mm max. 700 x 2,500 mm

Būklė: naudotas, Gamybos metai: 1986, - 2 pneumatic pressure cylinders (longitudinal) - 2 pneumatic pressure cylinders (lateral) - 2 pneumatic workpiece hold-downs - Feed belt width: approx. 680 mm - Feed belt length: approx. 3,400 mm - Clamping surface: 680 x 1,400 mm Dkodpfx Aoiim Rneaior - Control panel Machine dimensions: - Length: approx. 3,400 mm - Width: approx. 1,700 mm - Height: approx. 1,400 mm - Weight: approx. 800 kg

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Pilno surinkimo pjūklo rėmas, tinkantis Esterer Gatter HDE arba SS 71. Dodexw Ubnjpfx Aaiskr

Būklė: geras (naudotas), WD gate saw type GXW 71, with pendulum roller bearings on the main shaft. Suitable for all GXV and GXW gate saw base plates. Fully hydraulic, with hydraulic saw tensioner. Ideal as a replacement saw frame or for flywheel exchange. Dksdpfsuql Iljx Aaier

Būklė: naujas, Working width: 3500 mm Working height: 2300 mm Number of pressing cylinders: 4 pcs. S&S Frame Press Type RP 2000 – CE version Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment includes intermediate pressure bars, slanted window device, counter profiles for single-part production, and much more! Request our complete price list! Description: Dkodped Ih H Sjfx Aaisr Robust welded frame construction made from thick-walled special profiles, sliding carriages, and pressure bars with 50 mm hole grid. Continuous stop on the left side for width pressing, lower stop adjustable in 2 levels. Vertical pressing cylinders mounted on special pressure bar, with single-handed quick adjustment with weight compensation, height-adjustable in 50 mm increments; long sliding carriages ensure long-term durability for high pressing forces. Fast and smooth width adjustment via ball-bearing mounted carriage with central locking, locked in 50 mm hole grid. Upper horizontal pressing cylinder is continuously height-adjustable and fitted with weight compensation. Lower horizontal pressing cylinder with centering bores for both stop levels, without weight compensation. Stop and pressure plate depth: 100 mm. Pressure plate and support width: 130 mm. Machine is electro-hydraulically controlled, equipped with 2 vertical single-acting pressure cylinders (d = 50 mm, stroke 120 mm) with weight compensation and one-handed quick adjustment; 2 horizontal double-acting pressure cylinders (d = 40 mm, stroke 120 mm) with weight compensation; 2 manual control valves, pressure gauge, 1 pressure control valve adjustable from 20 to 100 bar (corresponds to 400 to 2000 kg vertical pressing force); powered by a 3 kW three-phase motor for 400 V, 50 Hz operating voltage. Completely wired for electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey. (Technical data as provided by the manufacturer, subject to change. Images may show optional equipment!)