Portal pirkti naudotą (1 416)

Būklė: naudotas, Gamybos metai: 1965, Dimensions (length/width/height): 10,460 × 5,715 × 5,537 mm Horizontal travel of spindle head: 3,160 mm Vertical travel of spindle head: 1,000 mm Milling length: 2,250 mm Cpodeuh E Tbepfx Aahew Machine weight approx.: 76,660 kg

Būklė: geras (naudotas), Gamybos metai: 1997, Portal centre with high rigidity due to a cast construction and the latest technology in control systems, vibration damping, dynamic axis movements, and temperature stabilization of the machine frame. Even grinding operations can be performed with high precision. Year of manufacture: 1997 Renewed assemblies: - Milling spindle - Complete control unit - Guideways Technical Data: - Travel ranges: X 1,000 mm, Y 800 mm, Z 600 mm - Drive power: 25 kW - Spindle speed: 30,000 rpm - Spindle interface: HSK E 50 - Feed speed: up to 30 m/min Work Table: - Dimensions: 1,200 mm x 1,000 mm - Max workpiece weight: 1,000 kg - Table equipped with 3R system for workpiece clamping Control: - RMS 6 Windows NT, including latest version of NC milling simulation software - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT allows direct toolpath programming - Adjustable dynamics for high precision Csdpfjvt Dwbsx Aahopw Machine Design: - High machine rigidity due to gantry design with cast construction - Optimum spindle vibration damping through embedded special polymer - Temperature stabilization of the entire machine body - Crane loading possible Tool Changer: - 18 stations, dust-protected, with integrated measuring laser for tool length and diameter - Automatic sister tool replacement, distance-dependent Equipment: - Cooling unit for temperature stabilization - Full protective enclosure, roof can be opened - Probing with 3D probe for quick setup - Integrated chip conveyor for easy chip disposal Machine Data: - Space requirement (excluding service area): approx. 4,200 mm x 3,350 mm x 4,200 mm (LxWxH) - Weight: approx. 13,000 kg - Connected load: 50 kVA, 400V, 50/60 Hz The machining centre is in very good condition and operates reliably. There are no outstanding maintenance or repair works. Inspection under power and in operation is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Būklė: naudotas, Gamybos metai: 2000, Gamintojas: DROOP + REIN, tipas: T2540R50E, pagaminimo metai: 2000, serijos nr.: 01540, valdymas: gamintojas Fidia, tipas C20/M30, eigos X/Y/Z: 5.000 x 3.000 x 1.950 mm, 5 ašių, įrankių laikiklis SK 50, stalo dydis: 5.000 x 3.500 mm, verpstės apsisukimai: 6.000 aps/min, 60 vietų įrankių keitiklis, matavimo įrenginys – gamintojas Braankamp, saugos šviesos užtvaros, 1 darbastalis, 3 stalčių spintelės, 3 WTS vežimėliai, 6 WTS spintelės su roletais, turinys: 250 SK 50 įrankių laikiklių, matavimo jutiklis, tvirtinimo priemonės, įrankiai paruošimui. Csdpfx Aasx R Dr Eehspw +++ Dėmesio: Įranga yra internetinės aukciono dalis! +++

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2020, veikimo valandos: 12 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 5645, X ašies eiga: 6 000 mm, Y ašies eiga: 4 000 mm, Z ašies eigos atstumas: 1 600 mm, X ašies padavimo greitis: 25 000 m/min, Y ašies padavimo greitis: 25 000 m/min, padavimo greitis Z ašis: 25 000 m/min, bendras ilgis: 6 550 mm, stalo ilgis: 2 500 mm, stalo plotis: 2 500 mm, bendras plotis: 15 900 mm, veleno greitis (maks.): 4 000 aps./min, bendras aukštis: 11 500 mm, bendras svoris: 57 000 kg, darbo diapazonas: 2 500 mm, šlifavimo veleno variklio galia: 46 000 W, Dear Sir or Madam, We hereby offer our gantry bed milling machine for sale. It was installed during the winter of 2019/2020 and has accumulated 12,000 operating hours. Price information is available upon request. The machine is currently still in operation. The quoted price pertains to the machine only. Dismantling, transport, and installation are the responsibility of the buyer. We look forward to receiving serious inquiries. Thank you in advance. Cpodpfottri Tsx Aahsw

Būklė: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 23750, X ašies eiga: 7 500 mm, Y ašies eiga: 3 500 mm, Z ašies eigos atstumas: 2 300 mm, veleno greitis (maks.): 24 000 aps./min, bendras svoris: 120 000 kg, šlifavimo veleno variklio galia: 32 000 W, Siūlome šį naudotą FOOKE Endura 905 Linear sijos tipo frezavimo staklę su dviem kolonomis, pagamintą 2008 metais. Staklių tipas: Endura 905 Linear Pagaminimo metai: 2008 Įtampa: 400/230 V Dažnis: 50 Hz Galia: 130 kW Elektros spintos apsaugos klasė: IP54 Svoris: 120 000 kg Jei turite klausimų ar reikia daugiau informacijos, drąsiai rašykite arba skambinkite mums. Cedpfxeyazmke Aahepw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 19 394 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2522027, X ašies eiga: 2 500 mm, Y ašies eiga: 2 200 mm, Z ašies eigos atstumas: 1 250 mm, bendras ilgis: 5 900 mm, stalo ilgis: 2 500 mm, stalo plotis: 2 500 mm, bendras plotis: 6 139 mm, bendras aukštis: 5 980 mm, greitas poslinkis X ašimi: 60 m/min, greitas poslinkis Y ašis: 60 m/min, greitasis eiga Z ašyje: 50 m/min, atstumas tarp stulpų: 3 225 mm, stalo apkrova: 4 000 kg, ruošinio svoris (maks.): 16 000 kg, sukimosi greitis (min.): 1 aps./min, sukimosi greitis (maks.): 15 000 aps./min, atstumas nuo stalo centro iki veleno galo: 1 500 mm, įrankio svoris: 8 000 g, Įranga: sūkių greitis be galo kintamas, Valdymas: Heidenhain TNC640 Valdomų ašių skaičius: 5; sinchroniškai Eksploatacijos pradžia: 2019 Veleno darbo valandos: 12 629 Įrankio tvirtinimas: HSK 100 Įrankių keitiklis: 30 padėčių Linijinis variklis Vidinis aušinimas (IKZ): 65 barai įskaitant drožlių transporterį įskaitant specialų valdymo pultą Cpedpfx Aoxx Svxoahew

Būklė: labai geros būklės (naudotas), rida: 20 226 km, galia: 316 kW (429,64 AG), pirmoji registracija: 12/2021, kuro tipas: dyzelinas, ašių konfigūracija: 4x2, kuras: dyzelinas, stabdžiai: variklio stabdymas, spalva: oranžinė, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: oras, Gamybos metai: 2021, Įranga: EBS (Elektroninė stabdžių sistema), elektrinis langų reguliavimas, oro kondicionavimas,

Būklė: naudotas, Gamybos metai: 2008, Technical details: Drilling capacity in steel (diameter): 100 mm Maximum pitch circle diameter: 7000 mm Number of spindles: 2 Drill spindle speed range: 1 - 3000 rpm Rapid-traverse spindle taper ISO: 50 Drill slide travel: 900 mm Feed rate: 1 - 6000 mm/min Maximum workpiece weight: 18,000 kg Total power requirement: 125 kW Space required approx.: 13 x 11 x 5.1 m Cjdpevb Drhofx Aahjpw Equipped with CNC SIEMENS 840 D Workpiece clamping range up to 7000 mm diameter The machine is equipped with 2 drilling spindle supports and ICS (50 bar) allowing simultaneous drilling. Spindle taper SK 50, 2 speed stages: 1 - 600 rpm, 1650 Nm; 1 - 3000 rpm, 300 Nm. Chip conveyor and coolant system

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Heyligenstaedt Heynumill 2700-PF 3/5 ašių CNC portikinis frezavimo staklės su integruota C ašimi ir keičiamos galvos frezavimui. Valdymas Heidenhain TNC 430 X ašis Y ašis Z ašis Cpodpfx Aeyaazmeahjw 3.000 mm 4.000 mm 1.500 mm 2018 metais Heynumill staklėse buvo visiškai atnaujinta hidraulika, pakeisti visi elektros laidai, atnaujintas veleno aušinimo įrenginys, abu išilginiai transporteriai ir visiškai suremontuotos galvos. Bendra remonto suma siekė 160.000 €. 2020 metais buvo pakeista frezavimo pavarų dėžė.

Būklė: geras (naudotas), Gamybos metai: 1995, veikimo valandos: 43 499 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 000 mm, Y ašies eiga: 2 500 mm, Z ašies eigos atstumas: 1 000 mm, 5-Axis Gantry Milling Machine WALDRICH Product manufactured on this machine: AIRBUS LANDING GEAR (aerospace) Year of Manufacture: 1995; Year of Delivery: 1998 Installation & Commissioning: 1999 Operating Time: 03/1999 to 07/2022 (21 years) Condition: Very Good Customer Specifications / History Previous Owner (1999–2022): German aerospace group Technical Data Travel Axes & Working Area X-Axis (table longitudinal travel): 4,000 mm Y-Axis (cross slide transverse travel): 2,500 mm Z-Axis (ram vertical travel): 1,000 mm Clearance between columns: 2,000 mm C-Axis: 360,000 positions (0.001° increments) B-Axis: 360,000 positions Tables & Pallets Number of tables: 2 Table dimensions: 1,500 x 3,000 mm Table height above floor: 740 mm Max. table load: 12,000 kg Feed & Rapid Traverse X/Y/Z: Feed 0–6,000 mm/min, Rapid traverse 15,000 mm/min B-Axis nutator: 0–3,600 deg/min C-Axis nutator: 0–3,600 deg/min Feed Forces / Torque X/Y/Z max.: 30 kN each C-Axis removable torque: max. 20,000 Nm C-Axis position control: max. 4,000 Nm Speed Range Stage I: 20–875 rpm Stage II: 876–4,000 rpm Spindle Drive Power: 50 kW Speed range: 20–4,000 rpm Tool Changer System Type: Chain magazine Capacity: 120 tools Tool holder: ISO 50 Max. tool Ø: 315 mm Tool Ø at full capacity: 100 mm Max. tool length: 550 mm Max. tool weight per gripper: 35 kg Spindle Units / Distances Vertical spindle unit: spindle face – table surface 250–1,250 mm Horizontal spindle unit: spindle center – table surface 150–1,150 mm Nutator (MC303): spindle center – table surface 45–1,045 mm Coolant & Lubrication Coolant supply: available internally and externally Lubrication: automatic (spindle bearings and gearboxes) Dimensions & Weight Machine dimensions (approx.): Length: 14,700 mm Width: 10,000 mm Height above floor: 6,079 mm Total machine weight (approx.): 72,500 kg Machine bed: 8,500 kg Machine table & pallet: 16,000 kg 2 columns: 10,200 kg Crossbeam with platform: 20,000 kg Special Features & Accessories Fully automatic tool changer (ATC): 120 positions (ISO 50) Fully automatic head changer incl. universal milling heads Milling head: C-Axis: 360,000 x 0.001° B-Axis: 360,000° Accessories: 3 chip conveyors Tool box + pallets with loose accessories Packing List (Transport Dimensions) Axes: 8,950 x 1,700 x H 1,000 mm 2 tables: 3,300 x 1,700 x H 340 mm Tool changer with slide: 3,500 x 2,300 x H 2,670 mm Tool changer without slide: 4,450 x 1,060 x H 1,870 mm Pick-up heads: 3,000 x 470 x H 2,200 mm Crossbeam: 7,000 x 2,000 x H 2,500 mm 2 support columns: 2,900 x 1,000 x H 1,500 mm Slide with ram: 3,450 x 1,800 x H 2,100 mm Chain section: 3,700 x 2,000 x H 1,100 mm Electrical cabinet No. 1: 5,400 x 600 x H 2,000 mm Electrical cabinet No. 2: 2,100 x 650 x H 2,000 mm Chip conveyor: 5,000 x 500 x H 2,300 mm Csdpfjx Hxdzsx Aahopw Head: 900 x 600 x H 700 mm Tool box: 2,100 x 1,200 x H 600 mm 7 pallets with loose accessories This WALDRICH SIEGEN 5-axis gantry milling machine is ideally suited for machining steel, cast iron, and non-ferrous metals. The combination of a 50 kW spindle drive, automatic tool changer (120 positions), fully automatic head changer, and high-precision B/C-axis positioning (0.001°) makes it the ideal solution for demanding and complex manufacturing tasks.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, Perstatomo tipo kranas, atnaujintas, 35 tonų keliamoji galia, 18 metrų tarpatramis Cpsdpfegggh Ajx Aahow

Būklė: naujas, Gamybos metai: 2025, Table surface: 2000 x 1000 mm Installation height: 700 mm (distance between table and piston tip) Table height: 800 mm Cylinder diameter: 240 mm Motor power: 7.5 kW Pump capacity: 22 L/min Cpodpjhu H Dpofx Aahsw Forward travel speed: 9 mm/sec Return speed: 13 mm/sec Tank capacity: 70 L Capacity: 150 tons – 340 bar / 172 tons – 380 bar Motor control via hand lever Cylinder manually adjustable sideways Bridge adjustable via handwheel Table surface: 2000 x 1000 mm Installation height: 700 mm (distance between table and piston tip) Piston stroke: 400 mm Table height: 800 mm Cylinder: Ø 240 mm Motor: 7.5 kW Pump: 22 L/min – ASC Speed: forward 9 mm/sec – return 13 mm/sec Tank volume: 70 L Pressure regulator valve Pressure gauge display Pressure-hold valve Weight: 2300 kg

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Portalinis kranas Bollegraaf, 30 tonų, 32 metrų, kėlimo aukštis 10 metrų Cjdpfxsw S Ea Sj Aahspw

Gamybos metai: 2015, būklė: visiškai atnaujintas (naudotas),

Būklė: geras (naudotas), Gamybos metai: 2004, X ašies eiga: 1 750 mm, Y ašies eiga: 1 400 mm, Z ašies eigos atstumas: 600 mm, CNC Gantry Milling Machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Model: STINGER Control: Heidenhain iTNC530 Year of manufacture: 2004 Chip conveyor Laser tool setter Portal handwheel Fully automatic A/B head High-pressure coolant system Specifications Metric US Standard X-axis travel: 1750 mm Y-axis travel: 1400 mm Z-axis travel: 600 mm Table length: 1200 mm Table width: 1000 mm Table load capacity: 5000 kg Feed rate X-axis: 35000 mm/min Feed rate Y-axis: 35000 mm/min Feed rate Z-axis: 35000 mm/min Tool holder: HSK 63 ISO/Bt/Mk Spindle power: 25 kW Spindle speed: 18000 rpm Tool changer: 30 positions Through-spindle coolant: 20 bar Number of controlled axes: 5 Chip conveyor: Yes Coolant system: Yes Dimensions (approximate) Cjdpfx Asuni D Eoahopw Length: 6000 mm Width: 4000 mm Height: 3850 mm Weight: 21000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all critical details.

Būklė: naudotas, Gamybos metai: 2016, x-axis: 6,800 mm y-axis: 4,000 mm z-axis: 1,500 mm Control: iTNC 530 HSCI Heidenhain Clearance between columns max.: 5,090 mm Distance spindle center to table: 1,825 mm Type: 175149A-0007 Spindle speed range max.: 19,800 rpm Main spindle drive power: 20 kW Tool holder: HSK-A63 Swivel range B-axis: +115° / -115° Rotational range C-axis: +/- 200° Type: 178099-0005 Spindle speed range max.: 10,020 rpm Main spindle drive power: 20 kW Cedpfx Aaex Avqbshopw Tool holder: HSK-A100 Swivel range B-axis: +115° / -115° Rotational range C-axis: +/- 200° Clamping area table: 6,000 x 3,000 mm Max. table load: 50.0 t Height above floor: 100 mm Number of T-slots: 12 T-slots width: 28H12 mm T-slot spacing: 250 mm Number of tool stations: 62 (38+24) positions Number of tool stations HSK A63: 37+1 positions Number of tool stations HSK A100: 23+1 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 mm Max. tool weight HSK A63: - kg Max. tool diameter HSK A100: 80 mm Max. tool length HSK A100: 450 mm Max. tool weight HSK A100: - kg Rapid traverse (X / Y / Z): 40,000 mm/min Rapid traverse B/C: 4,320 °/min Feed rate X/Y/Z: 30,000 mm/min Feed rate B/C: 2,160 °/min Max. acceleration: 3.2 m/s² x-axis: 6,800 mm y-axis: 4,000 mm z-axis: 1,500 mm b-axis: +115° / -115° c-axis: +/- 200° Total power requirement: 180 kVA Space requirement approx.: 12.5 x 15.0 x 7.0 m 5-axis high-speed portal large machining center DROOP & Rein - FOGS 40 60 C - Fork-type head

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1999, X ašies eiga: 11 450 mm, Y ašies eiga: 3 500 mm, Z ašies eigos atstumas: 1 250 mm, Technical Specification Value Unit Travel distances X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of Z-axis slide: 360 x 360 mm Gantry clearance: 3,000 mm Height under vertical spindle: 1,400 mm Working table span width: 2,500 mm Milling Unit: Type FA 305 C Power output: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Slide cross-section: 360 x 360 mm Vertical head with spindle Power output: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse X, Z: 25,000 mm/min Rapid traverse Y: 20,000 mm/min Stepless feed rate in X, Y, and Z: 10,000 mm/min Feed force per axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° indexing, with SK50 spindle Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system 1 pallet shuttle with 2 storage stations Cpedpfxjtix S Ns Aahjw 1 manual pallet transfer system between machine and shuttle 2 workpiece holding pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Distance between locations on chain: 130 mm Diameter of successive tools: 125 mm Max. tool diameter: 200 mm Max. tool length: 400 mm Max. tool weight: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling systems: - Coolant supply via adjustable nozzles - ICS / through-spindle coolant, 3,000 l tank, Flow rate: 30 l/min, Pressure: 7 bar at tool 2 chip conveyors: 1 Gantry enclosure Touch probe, brand: RENISHAW, type: MP14 Electronic handwheel Remote diagnostics Tool management and wear monitoring Documentation in two copies: German / French CE certification Very well-maintained, regularly serviced condition!

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 200 mm, Y ašies eiga: 2 100 mm, Z ašies eigos atstumas: 900 mm, Travel distances: X-axis (longitudinal) 3200 mm Y-axis (transversal) 2100 mm Z-axis (vertical) 900 mm Cpjdpfx Aox H Srloahew Working area: Table clamping surface 3000 x 1700 mm Spindle nose – table 66 – 966 mm Table load capacity 11,000 kg 5-axis fork head: Tool holder HSK 63 A C-axis (4th axis) +/- 360° B-axis (5th axis) +100° / -110° Main drive: Drive type Motor spindle Drive power 63 kW Spindle speed: Spindle speed 18,000 rpm Torque 106 Nm Max. rapid traverse speed: X and Y axes 15,000 mm/min Machine weight: 37,700 kg Equipment: HURCO CNC Machining Center DCX 32-5 Si (ATC 60) with MAX5 Control - AXS control with detachable electronic handwheel - Pentium technology, SSD (Solid-State Drive) storage, 2 GB RAM, Ethernet interface, USB interface, integrated self-diagnosis, WINDOWS platform - Synchronous tapping (thread tapping without floating chuck) - 60-position tool changer - 5-axis fork head - Motor spindle - Spindle cooler - Chip conveyor 5-axis simultaneous machining, enables simultaneous movement of 4 or 5 axes during NC operation.

Gamybos metai: 2010, būklė: naudotas, Rok produkcji: marzec 2010 Csdov Sra Ispfx Aahspw Nowy: Nie

Gamybos metai: 2003, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: MBUT133-544, DEMAG KBK crane runway overhead crane, dimensions approx. 10.5 x 6 m Load capacity / lifting capacity: 500 kg (0.5 t) Technical details of the system: - Crane runway made of Demag KBK1/2 rails Cpedpfxety Sxws Aahow - The system is delivered complete: * KBK rails * Rail connectors * Trolleys * End plates * Cable management system (energy chain) * Mounting brackets Includes steel 500 kg chain hoist – lifting height approx. 3 m Crane is dismantled and available immediately. Used condition, see pictures. Item location: 75053 Gondelsheim Shipping by freight forwarder or collection only by appointment. Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems available as well. Load capacities from 125 kg to 1600 kg. Please send your inquiry for crane runways with required load capacity and dimensions without obligation.

Būklė: naujas, Gamybos metai: 2025, Ref. no.: 10463 Manufacturer: IGREK Model: FR 3500 XL Year of manufacture: 2025 Control system: CNC Controller: Siemens 840 D / Heidenhain iTNC 640 Location: Istanbul Country of origin: Türkiye X travel: 6500 mm Y travel: 3500 mm Z travel: 1400 mm Cpodpfx Aasxmd Szshsw A-axis: +/- 115° C-axis: 360° Spindle speed: 12,500 rpm Max. torque: 235 Nm Rapid traverse X/Y/Z: 30 m/min Table size (LxW): 2290 – 6490 x 3580 mm Spindle drive power: 54 kW Max. table load: 4000 kg Tool holder: HSK-A100 Machine length: 11,500 mm Machine width: 7,400 mm Machine height: 6,600 mm Weight: 120 t Additional information: IGREK FR 3500 XL – Precision and Performance at the Highest Level The IGREK FR 3500 XL is a next-generation, CNC-controlled 5-axis gantry milling machine (year of manufacture: 2024). Specially designed for demanding machining of large workpieces, this machine excels in versatility and precision. Featuring advanced control via Siemens 840D or Heidenhain iTNC 640 and a robust construction, the machine offers optimal conditions for production across a wide range of industries. Key Features: Large machining travels: With travel ranges of 6,500 mm (X), 3,500 mm (Y), and 1,400 mm (Z), this machine is ideally suited for the machining of oversized components. 5-axis simultaneous machining: The A-axis, with a swivel range of +/- 115°, and the C-axis, with 360° rotation, enable highly precise machining of complex geometries. High-performance spindle: The spindle achieves speeds of up to 12,500 rpm and a maximum torque of 235 Nm—ideal for demanding milling operations. Exceptional stability: With a machine weight of 120 tons and a table load capacity of up to 4,000 kg, vibration-free machining is assured, even with heavy workpieces. Flexible tool interface: The HSK-A100 tool holder allows for rapid tool changes and optimal process times. High rapid traverse speed: With 30 m/min in X, Y, and Z axes, high productivity is achieved. Technical Data Overview: Table size: 2,290 – 6,490 x 3,580 mm Spindle power: 54 kW Max. torque: 235 Nm Tool interface: HSK-A100 Machine dimensions (LxWxH): 11,500 x 7,400 x 6,600 mm Max. table load: 4,000 kg The IGREK FR 3500 XL sets new benchmarks in large-part machining. Available immediately, it comes with comprehensive warranties and direct manufacturer service, both nationally and internationally. Take advantage of the latest technology for your production—contact us for more details!

Būklė: naujas, Gamybos metai: 2025, Ref. No.: 10464 Manufacturer: IGREK Model: 3500 XXL Year of manufacture: 2025 Control type: CNC Control system: Siemens 840 D / Heidenhain iTNC 640 Location: Istanbul Country of origin: Türkiye X-axis travel: 10,500 mm Y-axis travel: 3,500 mm Z-axis travel: 1,400 mm A-axis: +/- 115° B-axis: 360° Max. torque: 235 Nm Rapid traverse X/Y/Z: 30 m/min Spindle drive power: 54 kW Max. table load: 4,000 kg Tool holder: HSK-A100 Spindle speeds: 12,500 rpm Machine length: 16,000 mm Machine width: 7,400 mm Machine height: 8,500 mm Weight: 195 t Additional information: IGREK 3500 XXL – Custom Precision for Large-Scale Projects The IGREK 3500 XXL is a state-of-the-art CNC 5-axis gantry milling machine, developed for the highest precision machining of large components. Built in 2024, immediately available, and equipped with the latest technology, it meets the most demanding requirements in heavy industry and mechanical engineering. Key features: • Vast machining area: With travels of 10,500 mm (X), 3,500 mm (Y), and 1,400 mm (Z), the machine offers exceptional flexibility for processing large workpieces. • 5-axis simultaneous machining: The A-axis (+/- 115°) and B-axis (360°) provide maximum precision and versatility for complex workpiece machining. • Powerful spindle: Featuring speeds up to 12,500 rpm, a maximum torque of 235 Nm, and a drive power of 54 kW – ideal for high-performance applications. • Robust and durable: With a weight of 195 tonnes and a maximum table load of 4,000 kg, the machine is designed for heavy-duty machining. • Innovative tool clamping: The HSK-A100 tool holder enables rapid tool changes and increased efficiency. • Speed and efficiency: Rapid traverse rates of 30 m/min on all axes ensure maximum productivity. Cjdpsxc Tr Aefx Aahjpw Technical data at a glance: • Travels: X 10,500 mm / Y 3,500 mm / Z 1,400 mm • Spindle power: 54 kW • Spindle speed: 12,500 rpm • Table load: up to 4,000 kg • Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm • Weight: 195 tonnes Additional benefits: Delivered with the advanced Siemens 840D or Heidenhain iTNC 640 control system, the machine comes with global warranty and service support from the manufacturer. Choose the IGREK 3500 XXL for unmatched precision and efficiency in large component machining. Contact us now for a non-binding offer!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, tuščias svoris: 8 400 kg, Pateikus pasiūlymą įsipareigojama laiku atsiimti įrangą 2026 m. 1 arba 2 savaitę! Cjdpfx Aoxzubpoahspw

Būklė: geras (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 2 500 mm, Z ašies eigos atstumas: 1 250 mm, veleno greitis (maks.): 10 000 aps./min, Zimmermann FZ38 - 5 ašių portalas Pagaminimo metai – 2005; 2022 m. Zimmermann visiškai atnaujino, investuota 600 000 eurų, visi dokumentai pridėti X 3000 Y 2500 Z 1250 A +/- 100 laipsnių Csdoxziamjpfx Aahspw C +/- 360 laipsnių 2 verpstės: 50 kW – 24 000 aps./min ir 44 kW – 10 000 aps./min HSK 100 Linijinių ašių sertifikatas 5/m Siemens valdymas U… Prieinama iš karto Šis įrenginys 2022 m. buvo visiškai atnaujintas ir suremontuotas Zimmermann įmonės. Tam buvo investuota apie 600 000 eurų, visi sąskaitų dokumentai yra. Įrenginys labai geros, kaip naujas, būklės.

Būklė: naujas, X ašies eiga: 600 mm, Y ašies eiga: 1 200 mm, Z ašies eigos atstumas: 150 mm, ašies variklio galia: 2 200 W, ašies skaičius: 1, veleno greitis (maks.): 24 000 aps./min, Įranga: sūkių greitis be galo kintamas, CNC4ALL Professional 1200 × 600 💪 Compact Precision CNC Milling Machine – powerful, versatile & in stock! Features (Premium Configuration): 💨 2.2 kW Spindle Motor (water-cooled) – powerful & quiet for continuous operation ⚙️ 9 Nm Stepper Motors (micro-stepping) – precise movements & smooth running 💧 Minimum Quantity Lubrication – extends tool life & reduces maintenance 🌪️ Extraction Hood – clean workspace & clear view while milling 🔄 Rotary Axis D 80 mm × 900 mm – ideal for round parts, engravings & 3D machining Cedpfjxwdkrsx Aahepw ❄️ Cooling System for Spindle Motor – consistent temperature for long service life 🧲 Vacuum Pump (side channel blower) – secure clamping of both large and small workpieces 💻 Control software included – Plug & Play: connect, start, mill! 📐 Technical Data: * Working area: 1200 × 600 × 150 mm * Accuracy: Positioning ± 0.02 mm | Repeatability ± 0.03 mm * Travel speed: up to 8,000 mm/min * Guide system: Hiwin linear guides, size 20 mm * Drive: TBI ball screw spindles * Machine table: Cast iron table with T-slot/vacuum table combination * Frame: Welded steel subframe, CNC-machined for flatness & stability 🚀Your Advantages at a Glance: ✅ In stock – available for immediate delivery & ready for operation! ✅ Compact with industrial precision – perfect for workshops & small-batch production ✅ High performance for wood, plastic, aluminium & composite materials ✅ Clean, efficient production thanks to extraction hood & minimum quantity lubrication ✅ Flexible with rotary axis & vacuum table – for flat and round workpieces ✅ User-friendly control – quick setup & easy operation 🪵 Ideal for: Carpentries • Model makers • Sign making • Prototyping • Plastics & aluminium machining 📦 Order now! The CNC4ALL Professional 1200 × 600 offers precision, performance and reliability in a compact format – in stock & ready to use. 👉 Contact us now for your personal quote or to arrange a demonstration in our showroom