Poly pirkti naudotą (2 148)

Sąlyga: naujas, spalva: kitas, Intended use: Mining We manufacture mobile impact crushers for primary, primary-secondary, or tertiary crushing. Mounted on a trailer, equipped with a hopper, conveyor belt, and grizzly feeder to separate clay and soil from the stone. Combinations of crushers and screens are also available, with screening units featuring two, three, or four decks. The final products are base layers ("tampons") in sizes of 0-30 mm, 0-60 mm, or 0-100 mm, or asphalt construction fractions: 0/4, 4/8, 8/11, 11/16, 8/16, 16/22, 16/32 mm. The plant is designed for processing soft and medium-hard rock. Advancements in technology mean that today, impact crushers can operate even in demanding working conditions. On tertiary impact crushers in challenging tasks, the impact hammers can pre-crush up to 40,000 m³ of gravel or volcanic rock. The plant is powered either via cable from a transformer station or by a generator. The configuration and size of the plant are customized according to project requirements. ----- - ----- - ----- Mining crushing plants are available as trailer-mounted units: Jaw crushers, cone crushers, vertical shaft impactors, various separation solutions; DRY and WET PROCESSING, including washing systems. Kfedpfsx D Dcbjx Abkja ----- - ----- - ----- All plants come with a 2-year warranty. Service and all spare parts are available.

Sąlyga: naujas, spalva: oranžinė, Usable material: Concrete Unladen weight: 26,000 kg Dimensions (L x W x H): 1,650 x 290 x 430 cm Load compartment volume: 60,000 l GENERAL FEATURES OF THE MOBILE CONCRETE PLANT: Plant capacity: 60 m³/h Control type: Fully automatic Kedjx D Db Rspfx Abkjfa Mixer: 1500/1000 twin-shaft mixer, 1 m³ fresh concrete per batch. Concrete plant weight: 27 tons, excluding cement silo. Concrete plant size: 16.5 (L) x 2.8 (W) x 4.2 (H) meters Total motor power: 165 kW, including screw conveyor. Voltage / Frequency: 380 V / 50 Hz Required installation area: 300 m² (excluding storage, truck parking, and office building) Number of operators required: 1 Coating: 1 layer of anti-corrosion primer, 2 layers of final coat epoxy paint, total paint thickness: 140 microns Number of trucks: 1 head truck (silo not included) CONCRETE PLANT DETAILS MANUFACTURER: POLYGON PLANT TYPE: POLYGON PMC60 MOBILE CONCRETE PLANT WITH TWIN-SHAFT MIXER PLANT CAPACITY: 60 m³ of fresh concrete per hour AGGREGATE BUNKER CAPACITY: 4x12 = 48 m³ CEMENT WEIGHING: 600 kg WATER WEIGHING: 300 kg MIXER CAPACITY: 1500-1000 L twin-shaft mixer (PMX 1000) TOTAL MOTOR POWER: 145 kW NUMBER OF DRIVE MOTORS: 18.5x2 kW GAMAK VOLTAGE: 380V - 50 Hz

Sąlyga: naujas, spalva: mėlyna, Intended use: Mining Unladen weight: 120,000 kg Fully automatic stationary crushing and screening plant Hard rock crusher for granite, basalt, and gabbro = +160 MPa Max. feed size: - 800 mm 35 m³ vibrating grizzly feeder 1 unit Jaw crusher 1100x850 mm 1 unit Belt conveyor 1200x6000 mm 1 unit Belt conveyor 1200x3300 mm 1 unit Kjdex D Db Dopfx Abkofa 30 m³ hopper 1 unit Metso HP400 cone crusher (chassis, software, motor) 1 unit (can also be a Turkish version of the cone crusher) Vibrating screen 2400x6000 mm 1 unit Conveyor belt 800x30000 mm 1 unit Conveyor belt 800x6000 mm 1 unit Conveyor belt 800x17000 mm 1 unit Belt conveyor 1000x33000 mm 1 unit Filling hopper with 20 m³ dispenser 2 units VSI900 2x200kW vertical shaft impact crusher 2 units Belt conveyor 1000x10000 mm 1 unit Conveyor belt 1000x28000 mm 1 unit Vibrating screen 2200x6000 mm 2 units Conveyor belt 800x10000 mm 1 unit Belt conveyor 600x10000 mm 1 unit Conveyor belt 600x20000 mm 5 units Conveyor belt 1000x2000 mm 1 unit Air-conditioned operator control room 1 unit

Sąlyga: naujas, spalva: mėlyna, Gamybos metai: 2024, Purpose: Mining Unladen weight: 54,000 kg Payload: 2,000 kg Gross vehicle weight (GVW): 56,000 kg Dimensions (L x W x H): 300 x 500 x 300 cm Loading area volume: 30,000 l Hopper, vibrating feeder, scalp or grizzly screen, and jaw crusher We are advertising the primary jaw crusher for demanding working conditions: • Dimensions: 1000 x 4000 mm • Feed hopper: 25 m³ • Throughput: 250–350 tons/hour • Body liners: HARDOX 450 – 10 mm • Weight: 22.5 tons Ksdsx D Dbwopfx Abkjfa • Vibro motors: 2 x 4.4 kW – Brand: KEMP-MEGATECH, Origin: ITALY • Walkways are included for servicing around the plant. Our main assembly, service, and spare parts. The warranty on the machine or plant is two years. NOTE: We manufacture all types of crushers and screening plants for every capacity!

Sąlyga: naujas, Unladen weight: 120,000 kg Cargo volume: 160,000 l STANDARD CONDITIONS The plant is designed for the production of 160 t/h of asphalt mix with a finished product at an initial moisture content of 4% and 160°C under the following standard conditions: • Aggregate temperature at dryer inlet: 10°C. • Sea level altitude • Average density of feed aggregates: 1,650 kg/m³ • Heavy fuel oil no. 6 calorific value ≥ 9,200 kCal/kg • Heavy fuel oil no. 4 calorific value ≥ 9,700 kCal/kg • Calorific value for diesel oil ≥ 10,200 kCal/kg • Natural gas calorific value ≥ 7,600 kCal/kg • Temperature increase of hot aggregates: 160 K • Residual moisture content in the mix: 0.3% • Max. aggregate size: 40 mm • 35% material passing through 3 mm sieve • Material is non-porous and non-hygroscopic with normal shape • Production tolerance rate according to environmental and parameter conditions: ±4% COLD AGGREGATE BUNKERS • Four cold aggregate bins made from 5 mm St 37 steel plate must be provided, each with an approximate capacity of 20 m³ and manufactured separately. • The bins must have a 800 mm high top extension fabricated from 6 mm plate to prevent material overflow. • Bunker discharge must be equipped with a movable unit. • Discharge flow from each bin must be optionally frequency-controlled (speed-controlled) and adjustable via the computer screen. • The discharge rate for each bunker must be settable via manual gates that can be mounted to each bin. • A warning system must be in place for aggregate run-out from the bunkers, with a warning indicator on the computer screen to alert the operator. Kfsdex D Dbqjpfx Abksa • Vibrator motor, controlled from the computer screen, must be installed to facilitate material flow and prevent clogging when handling fine materials. • A conveyor belt system must be installed under each bin to ensure reliable material flow. • Each bunker must be fitted with modular grids made from 10x50 mm plates with 10 mm diameter. • Silo loading width must be 3000x2400 mm. • An emergency stop rope system must be provided. • Possible belt faults must be displayed on the computer screen. 2. SUB-BUNKER – COLD AGGREGATE COLLECTING BELT • The horizontal belt must transport material drawn from each bin separately and in a controlled fashion to the inclined dryer feed belt, and provide material flow to a plant with 160 t/h capacity. • The rubber belt must be 10 mm thick, 800 mm wide, 4-ply with EP 125 class fabric. • Belt start/stop must be controlled from the computer screen. For emptying bins at the end of season, the belt must be run in reverse independently from other units. • The horizontal belt chassis must be made from steel construction, ensuring smooth operation and equipped with a belt tensioning system. • Each end of the belt must have a separation system. • Drive drum must be rubber-coated and have a 1-degree taper. • In emergencies...

Sąlyga: naudotas, New: Yes Color: Silver Usable Material: Bitumen Unladen Weight: 9,500 kg Cargo Space Volume: 50,000 l BITUMEN TANK (50 TONS) • The tank capacity must be 50 tons. • The tanks must be manufactured in accordance with TSE and Highway Commission standards. Ksdpjx D Dbksfx Abkofa • The tank must be equipped with a thermal oil heating system. • Seamless serpentine piping system for heating • The bitumen temperature must reach mixing temperature • The fuel tank must include a level and temperature indicator, suction nozzle, filling port and ventilation system, inspection hatch, and drain. • There must be support legs under the tank, and its surface must be insulated with 50 mm rock wool and covered with 0.80 mm galvanized sheet metal. 1. THERMAL OIL GENERATOR • The generator capacity must be 2,000,000 kcal/h. • The system must be designed for diesel fuel operation. • The generator must include a 1,500 l supply tank. • The generator must be horizontal, have a seamless steel-drawn thermal oil line, be double-walled, and of circulating body type. • The generator body must be insulated with 100 mm rock wool and covered with aluminum sheeting. • The generator system must be manufactured according to production standards and must include an expansion tank, a degasser, oil filter, valves, and a fully automatic ignition-controlled burner, control panel, pump, and necessary safety equipment. • The serpentine coil must be made of at least 30 m² of seamless steel pipe. • The generator must be equipped with a coupled warning system to protect the entire system in case of hazardous situations due to high oil level or decreasing heat transfer oil level. • The burner system must be designed for automatic activation according to the operational temperature setting of the heat transfer oil. • The system must be manufactured as a complete package.

Sąlyga: naujas, spalva: pilkas, Unladen weight: 35,000 kg Dimensions (L x W x H): 360 x 360 x 1,250 cm Cargo hold volume: 384,000 l 500 TON CEMENT SILOS, TECHNICAL SPECIFICATIONS SILO CAPACITY: 500 tons, 385 m³ (based on specific cement density of 1.3 tons/m³) SILO HEIGHT: 19,945 mm SILO DIAMETER: Ø 6,180 mm NUMBER OF SILO LEGS: 6 OUTLET DIAMETER: Ø 300 mm NUMBER OF COMPONENTS: 250 SILO WEIGHT: 28,000 kg (incl. legs: 35,000 kg) LEG MATERIAL FOR SILO: Ø273 x 12 mm steel pipe SILO FEET BRACKETS: NPL 80 mm angle profile Kjdpfxex D Dbde Abkjfa SILO SHELL PLATES: 20 mm CONICAL PARTS MATERIAL: 200 mm steel channel CONICAL PARTS: ST-37, 8 mm sheet steel SILO BODY MATERIAL: ST-37, 8 - 6 - 5 mm sheet TOP LID MATERIAL: ST-37, 6 mm sheet FILL CHAMBER: 4" steel chamber to silo legs INTERNAL INSPECTION EXTERNAL INSPECTION Access ladder installed on silos MAINTENANCE PLATFORM INCLUDED We manufacture silos based on requested specifications or individual project requirements. Painting: 1 layer of anti-corrosion primer, 2 layers of final coat epoxy paint, total paint thickness: 140 microns

Sąlyga: naujas, spalva: pilkas, Unladen weight: 35,000 kg Dimensions (L x W x H): 360 x 360 x 1,250 cm Cargo hold volume: 384,000 l 500 TON CEMENT SILOS, TECHNICAL SPECIFICATIONS SILO CAPACITY: 500 tons, 385 m³ (based on specific cement density of 1.3 tons/m³) SILO HEIGHT: 19,945 mm SILO DIAMETER: Ø 6,180 mm NUMBER OF SILO LEGS: 6 OUTLET DIAMETER: Ø 300 mm NUMBER OF COMPONENTS: 250 SILO WEIGHT: 28,000 kg (incl. legs: 35,000 kg) LEG MATERIAL FOR SILO: Ø273 x 12 mm steel pipe SILO FEET BRACKETS: NPL 80 mm angle profile SILO SHELL PLATES: 20 mm CONICAL PARTS MATERIAL: 200 mm steel channel CONICAL PARTS: ST-37, 8 mm sheet steel SILO BODY MATERIAL: ST-37, 8 - 6 - 5 mm sheet Kfsdpfx Aex D Daysbksa TOP LID MATERIAL: ST-37, 6 mm sheet FILL CHAMBER: 4" steel chamber to silo legs INTERNAL INSPECTION EXTERNAL INSPECTION Access ladder installed on silos MAINTENANCE PLATFORM INCLUDED We manufacture silos based on requested specifications or individual project requirements. Painting: 1 layer of anti-corrosion primer, 2 layers of final coat epoxy paint, total paint thickness: 140 microns

Sąlyga: naudotas, Nauja: Taip Naudojimo paskirtis: Kasyba Galia: 110 kW (150 AG) Savasis svoris: 35 000 kg Išmatavimai (I x P x A): 700 x 240 x 240 cm Žvyro plovimo mašina (su automatiniu SKF tepimu) Modelis: LW25 Mašinos dydis: 2000 x 7000 x 2 (dvejų eilių) Pavaros sistema: 2 x 55 kW Didžiausias įeinančios frakcijos dydis: 0 - 50 mm Pagrindinis korpusas: 8 mm kokybiškas ST37 A1 lakštinis plienas su susukta konstrukcija. Priekinė reduktoriaus grupė yra sujungta su 12 mm lakštiniu plienu. Spiraliniai kaušeliai su dvejų eilių laikikliu ST 37 pagaminti iš 8 mm lakšto; apsauginės nusidėvėjimo svirtys dengtos liejiniu, sraigto paviršius padengtas pakankamai kietu sluoksniu. Velenas: Iš Cr-Ni-Mo lydinio plieno. Kfjdpfx Ajx D Dagsbksa Korpusas: Iš naudoto GS52 plieninio liejinio. Guoliai: Aukštos klasės sferiniai ritininiai guoliai SKF arba FAG markės.

Gamybos metai: 2020, Sąlyga: naudotas, New: Yes Color: Orange Intended use: Mining Depending on your project requirements, we manufacture all types of screening machines: 1. Dry or wet screening machines 2. Available variants: a) Stationary – fully mounted on a concrete base, b) Semi-mobile plant on steel construction, c) Mobile screening plant mounted on a trailer, d) Mobile plant mounted on a tracked chassis We also build systems for micron fraction separation and filter presses. We provide generators to power the equipment as needed. Separation screens available: Polyurethane and # wire mesh. The equipment comes with a two-year warranty. Delivery approximately 6 weeks. We offer service, spare parts, and main installation. Siemens switches, SKF bearings, Lincoln centralized lubrication systems. Compliance with all EU standards and regulations. Kodpfsx D A Upsx Abkjfa

Sąlyga: naujas, galia: 132 kW (179,47 AG), kuro tipas: elektrinis, spalva: juodas, Intended application: Mining Unladen weight: 16,500 kg Dimensions (L x W x H): 250 x 300 x 400 cm Engine brand: Siemens Model 1: VSI 700 -CR Maximum feed size: 35 mm. Hard material Rotor diameter: 760 mm / closed rotor type Rotor speed: 50-70 m/s Drive: 132 kW / 1500 rpm Capacity: 40-60 t/h (0-5 mm sand production with 5-32 mm feed) Kfsdpfex D A Ucex Abkoa Total capacity: 80-120 t/h Weight: 8,500 kg Rotor diamond inserts (double row - 6 pieces tungsten carbide in ductile iron) Other wear parts (2 molybdenum, 22 chromium alloy castings) Electrically operated hydraulic unit (for belt tensioning and upper body lifting) Single-sided maintenance platform with ladder Drive sheave for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance crane Model 3: VSI 800 -CR Maximum feed size: 50 mm. Rotor diameter: 1000 mm / Standard rotor / closed rotor Rotor speed: 50-70 m/s Drive: 180 kW / 1500 rpm Capacity: 70-100 t/h (0-5 mm sand production with 5-50 mm feed) Total capacity: 100-150 t/h VSI-900-CR 1. Rotor diamond inserts (double row - 6 pieces tungsten carbide with ductile iron) 2. Other wear parts (2 molybdenum, 22 chromium alloy castings) 3. Electrically operated hydraulic unit (for belt tensioning and upper body lifting) 4. Single-sided maintenance platform with ladder 5. Drive sheave for two separate speeds (1400 rpm - 1600 rpm) 6. Vibration sensor switch 7. Maintenance crane Model 3: VSI 900 -CR Maximum feed: 45 mm Rotor diameter: 900 mm / CLOSED ROTOR Rotor speed: 50-70 m/s Drive: 185 kW x 2 / 1500 rpm Capacity: 70-80 t/h (0-5 mm sand production with 5-15 mm feed) Total capacity: 230 t/h Weight: 14,500 kg Standard equipment: 1. Electrically operated hydraulic unit (for belt tensioning and upper body lifting) 2. Single-sided maintenance platform (galvanized grating and steps) 3. Drive sheave for two separate speeds (1400 rpm - 1600 rpm) 4. Automation control panel (vibration sensor switch – power switch operation time control) 5. Maintenance crane

Sąlyga: naujas, galia: 250 kW (339,91 AG), Spalva: Nežinomos metalinės spalvos Paskirtis: Kasyba Savasis svoris: 24 000 kg Kfedpex D A T Eefx Abkoa ANTRINIS smūginis trupintuvas • Modelis: PPI-1412 • Maks. įeinančio grūdo dydis: 250 mm • Rotoriaus dydis: 1 400 x 1 125 mm • Rotoriaus apsukos: 750 aps./min. • Našumas: 150–250 t/h • Variklio galia: 250 kW • Svoris: 26 tonos • Pelkių plaktukų medžiaga: Mn-Cr 18% 2,2 Mo • Komplekte hidraulinio reguliavimo mechanizmas • Komplekte kranai.

Sąlyga: naujas, Gamybos metai: 2025, Naudojama medžiaga: betonas Kodsx D A Tlepfx Abkofa

Sąlyga: naudotas, Naudojama medžiaga: betonas Krovinių skyriaus talpa: 30 000 l Kfodsx D A Tfepfx Abkja

Sąlyga: naujas, Gamybos metai: 2023, bendras ilgis: 44 000 mm, bendras plotis: 1 000 mm, Tuščiasvoris: 37 000 kg Kfjdox D A S Uopfx Abkea

Sąlyga: naudotas, Gamybos metai: 2022, Naudojama medžiaga: betonas Kedsx D A S Ispfx Abkefa

Sąlyga: naudotas, galia: 115 kW (156,36 AG), Naudojama medžiaga: Betonas Kfjdpfxjx D A Szo Abkea Krovinių skyriaus talpa: 45 000 l

Sąlyga: naujas, Unladen weight: 18,600 kg Dimensions (L x W x H): 365 x 365 x 2,500 cm Loading compartment volume: 220,000 l 1. SILO CAPACITY: 300 TONS 2. SILO HEIGHT: 25,110 mm (including 3-meter concrete frame) 3. SILO DIAMETER: Ø 3,650 mm 4. NUMBER OF SILO LEGS: 4 5. SILO OUTLET DIAMETER: Ø 300 mm 7. SILO WEIGHT: 18,600 kg 8. MATERIAL OF SILO LEGS: Ø219 x 18 mm STEEL PIPE 9. SUPPORT FOR SILO LEGS: NPL 80 mm Kfodpfxsx D A Sus Abkea 10. SILO LEG PLATES: 20–25 mm 11. SUPPORT MATERIAL FOR CONICAL SECTIONS: 100 mm STEEL C-CHANNEL 12. CONICAL SECTION MATERIAL: ST-37, 6 mm SHEET METAL (S265) 13. SILO BODY MATERIAL: ST-37, 5–4 mm SHEET METAL 14. UPPER COVER MATERIAL OF SILO: ST-37, 4 mm SHEET METAL 15. INTERNAL MANHOLE IS INCLUDED (optional) 16. EXTERNAL MANHOLES ARE INCLUDED 17. SILO ROOF INCLUDES PARAPETS 18. MAINTENANCE PLATFORM IS INCLUDED 19. LOADING PIPE: 4-inch PIPE TO THE SILO LEG 20. PLATFORMS AND SERVICE LADDER FOR GALVANIZED PLATFORMS 21. ALL PNEUMATIC AND ELECTRICAL CONNECTIONS DONE Coating: 1 layer of anti-corrosion primer, 2 layers of final coat epoxy paint, total paint thickness: 125–140 microns

Sąlyga: naudotas, Naudojama medžiaga: betonas Kfsdpsx D A Snjfx Abkja

Sąlyga: naujas, spalva: balta, Naudojimo paskirtis: kasyba Svoris be krovinio: 11 000 kg Kfedpfx Aex D A Shjbkea Matmenys (I x P x A): 450 x 250 x 320 cm Terciarinė smūginė malūnas Modelis: PTC-1275 Didž. įeinančio grūdo dydis: 100–130 mm Rotoriaus matmenys: 1100x750 mm Įvado dydis: 500 x 1100 mm Rotoriaus greitis: 900 aps./min. Našumas: 50–100 t/val. Variklis: 60–80 kW / 1500 aps./min. Svoris: 9,5 t Komplekte važiuoklė, aptarnavimo aikštelė ir priežiūros kranas.

Sąlyga: naujas, spalva: oranžinė, Gamybos metai: 2025, Usable material: Concrete Unladen weight: 8,500 kg Loading bay capacity: 30,000 l Possible bunker configurations for fractions: 4 x 6 m³ or 2 x 12 m³ Collection conveyor for fractions: 650 mm x 2,450 mm Main chassis Cement weighing container – 300 kg Water scale – 200 l (galvanised) Additive weighing container – 50 l (galvanised) Compressed air systems – Pressus POLYGON P500 – planetary mixer: 0.75 / 0.5 m³ (Brand: Polygon) 18.5 kW Ermaksan gearbox, Gamak motor Automation system for power supply and operator panel – PLC (Siemens) + computer, printer, touch panel and electrical components Water pump 20 m³ / hour Tandem axles, tyres and hooks for carrier structure to facilitate transportation Handrails, maintenance platform, ladders are galvanised 800x13 500-mm belt conveyor for truck mixer with special scraper (height 4 metres) Cement silo (50 tonnes) + cement screw conveyor (WAM) 168 x 5,000 mm + silo equipment (WAM) (silo filter, air jet, safety valve, max-min level indicator with alarm systems) (all WAM) CONCRETE PLANT DETAILS POLYGON BRAND TYPE POLYGON PAC30 WITH PLANETARY MIXER FRESH CONCRETE PRODUCTION CAPACITY: 30 m³ / hour BUNKER VOLUME for fractions 4x6 = 24 m³ CEMENT WEIGHING CAPACITY: 300 kg WATER WEIGHING CAPACITY: 150 kg MIXER CAPACITY 750-500 l PLANETARY MIXER (P S1000) TOTAL MOTOR POWER: 65 kW MIXER ENGINE POWER: 18.5 kW GAMAK VOLTAGE: 380V – 50 Hz METAL STRUCTURE / MAIN CHASSIS The main chassis is designed based on field experience to facilitate transport, installation, maintenance, and operation processes. Aggregate bunker Weighing capacity: 24 m³ Aggregate bin volume: 4 x 6 m³ compartment, 1 discharge door per bin Vibrator: 2 pcs Kemp 200/3 Common dosing belt Dimensions: 650 mm x 2,450 mm Gearmotor: 3 kW Drive drum: 10 mm rubberised Type: Cast iron felt bearing housing SNH with lubrication Belt: TS 542 standard, 4 layers, 4/2, Collective weighing container Weighing capacity: 1 m³ Load cells: 4 x 1,000 kg Zemic Vibrator: 2 pcs Kemp 200/3 Cement weighing tank Weighing capacity: 300 kg Load cells: 3 x 500 kg Zemic Pneumatic valve: WAM BV1FS250NN diameter: 250 mm Feeder: pneumatic drive WAM ACP13 Vibrator: 1 pc Kemp 100/3 Water weighing tank Weighing capacity: 200 l Load cells: 3 x 500 kg ZEMIC Kfodpox D A Sbofx Abksa Pneumatic valve: BV1FS150NN – diameter: 150 mm Driver: pneumatic drive ACP13 Additive weighing tank Weighing capacity: 20 l Load cell: 1 x 100 kg ZEMIC Pneumatic valve: 1" TORK Pump: 0.37 kW Weighing system: 1 pc chemical weighing system Piston air compressor Features a stop-start operating system driven by pulley Equipped with three-phase electric motor Flow rate: 200 l / min Pressure: 6-8 bar MIXER TECHNICAL SPECIFICATION Performance value / unit capacity Load-carrying m³/h: 0.5 Fresh concrete capacity m³: 0.5 Capacity l: 750 Gearbox / Motor kW: 18.5 ERMAKSAN / GAMAK 1,500 rpm Side plates mm: 8 HARDOX Mixer housing thickness mm: 10 HARDOX Number of scrapers: 1 Number of mixing arms: 2 Scraper & mixing paddles mm: 32 mm Ni-Hard-4 Motor power kW: 18.5...

Sąlyga: naujas, Gamybos metai: 2024, Paskirtis: kasyba Kfsdpfx Abjx D A R Rsksa

Sąlyga: naudotas, New: Yes Color: Silver Usable Material: Bitumen Unladen Weight: 9,500 kg Cargo Space Volume: 50,000 l BITUMEN TANK (50 TONS) • The tank capacity must be 50 tons. • The tanks must be manufactured in accordance with TSE and Highway Commission standards. • The tank must be equipped with a thermal oil heating system. • Seamless serpentine piping system for heating • The bitumen temperature must reach mixing temperature • The fuel tank must include a level and temperature indicator, suction nozzle, filling port and ventilation system, inspection hatch, and drain. • There must be support legs under the tank, and its surface must be insulated with 50 mm rock wool and covered with 0.80 mm galvanized sheet metal. 1. THERMAL OIL GENERATOR • The generator capacity must be 2,000,000 kcal/h. • The system must be designed for diesel fuel operation. • The generator must include a 1,500 l supply tank. • The generator must be horizontal, have a seamless steel-drawn thermal oil line, be double-walled, and of circulating body type. • The generator body must be insulated with 100 mm rock wool and covered with aluminum sheeting. • The generator system must be manufactured according to production standards and must include an expansion tank, a degasser, oil filter, valves, and a fully automatic ignition-controlled burner, control panel, pump, and necessary safety equipment. • The serpentine coil must be made of at least 30 m² of seamless steel pipe. • The generator must be equipped with a coupled warning system to protect the entire system in case of hazardous situations due to high oil level or decreasing heat transfer oil level. • The burner system must be designed for automatic activation according to the operational temperature setting of the heat transfer oil. • The system must be manufactured as a complete package. Ksdpfx Asx D A R Djbkefa

Sąlyga: naujas, spalva: mėlyna, Gamybos metai: 2020, Intended use: Mining Unladen weight: 34,000 kg Payload: 2,000 kg GVW: 36,000 kg Dimensions (L x W x H): 300 x 500 x 300 cm Cargo hold volume: 30,000 l Hopper, vibrating feeder, waste or grizzly screen, and jaw crusher Kodpsx D A Rwefx Abkjfa Offered for sale is the primary jaw crusher designed for demanding working conditions: • Dimensions: 1000 x 4000 mm • Feed hopper: 25 m³ • Inlet capacity: 250-350 tons/hour • Casing plates: HARDOX 450 – 10 mm • Weight: 22.5 tons • Vibration motors: 2 x 4.4 kW – Brand: KEMP-MEGATECH, Origin: ITALY • Standing service platforms included around the unit. Assembly, service, and spare parts are provided by us. Warranty on the machine or plant is two years. NOTE: We manufacture all types of crushers and screening plants for all capacities!

Sąlyga: naujas, Svoris be krovinio: 290 000 kg Kfsdpfex D A Rqjx Abkea Krovinių skyriaus tūris: 3 000 000 l