Poly Clip pirkti naudotą (2 429)

Sąlyga: naujas, Unladen weight: 176,000 kg Dimensions (L x W x H): 1,500 x 1,500 x 3,500 cm Cargo volume: 2,200,000 l Hsdjx D Dgyepfx Abmofr 1. SILO CAPACITY: 3,000 TONS 2. SILO HEIGHT: 35,000 mm 3. SILO DIAMETER: Ø 12,400 mm 4. NUMBER OF SUPPORT LEGS: 7 5. OUTLET DIAMETER: Ø 400 mm 7. SILO WEIGHT: 176,000 kg 8. SUPPORT LEG MATERIAL: Ø273 x 20 mm STEEL PIPE 9. SUPPORT FOOT: NPL 80 mm 10. SUPPORT FOOT PLATES: 20-25 mm 11. SUPPORT MATERIAL FOR CONICAL SECTIONS: STEEL C-CHANNEL 160 mm 12. CONICAL SECTION MATERIAL: ST-37, 10 mm SHEET 13. SILO BODY: ST-37, 10-8-6-5 mm SHEET 14. UPPER COVER MATERIAL: ST-37, 5 mm SHEET 15. INTERNAL MANHOLE INCLUDED 16. EXTERNAL MANHOLE INCLUDED 17. SILO ROOF INCLUDES LADDERS 18. MAINTENANCE PLATFORM INCLUDED 19. TUBE LOADING: 4” TUBE TO SILO FOOT 20. STRUCTURAL ANALYSIS IS CARRIED OUT FOR THE SILOS AND THE PRODUCTION PROCESS DEPENDS ON PROJECT REQUIREMENTS. Painting: 1 coat of anti-corrosion primer, 2 coats of final epoxy paint, total paint thickness: 140 microns

Sąlyga: naujas, Unladen weight: 18,600 kg Dimensions (L x W x H): 365 x 365 x 2,500 cm Cargo hold volume: 220,000 l 1. SILO CAPACITY: 300 tons 2. SILO HEIGHT: 25,110 mm (with 3 m concrete base) 3. SILO DIAMETER: Ø 3,650 mm 4. NUMBER OF SUPPORT LEGS: 4 5. OUTLET DIAMETER: Ø 300 mm 7. SILO WEIGHT: 18,600 kg 8. SUPPORT LEG MATERIAL: Ø219 x 18 mm steel tube Hedpfxex D Dgto Abmofr 9. SUPPORT LEG PROFILE: NPL 80 mm 10. SUPPORT LEG PLATES: 20–25 mm 11. SUPPORT STRUCTURE MATERIAL FOR CONICAL PARTS: 100 mm steel channel 12. CONICAL PART MATERIAL: ST-37, 6 mm sheet steel (S265) 13. SILO BODY: ST-37, 5–4 mm LIM 14. SILO TOP COVER: ST-37, 4 mm sheet steel 15. Internal manhole is not closed 16. External manhole is included 17. SILO ROOF INCLUDES LADDERS 18. Maintenance platform is included 19. FILL PIPE: 4" pipe to silo base 20. PLATFORMS AND LADDERS FOR START-UP SERVICE INCLUDED 21. ALL PNEUMATIC AND ELECTRICAL CONNECTIONS INSTALLED Coating: 1 coat corrosion protection primer, 2 coats final epoxy paint, total paint thickness: 125–140 microns ----- 500 TON CEMENT SILOS, TECHNICAL SPECIFICATIONS SILO CAPACITY 500 tons, 385 m³ (based on cement density 1.3 t/m³) SILO HEIGHT 19,945 mm SILO DIAMETER Ø 6,180 mm NUMBER OF LEGS 6 OUTLET DIAMETER Ø 300 mm NUMBER OF COMPONENTS 250 SILO WEIGHT 28,000 kg (with legs: 35,000 kg) SUPPORT LEG MATERIAL Ø273 x 12 mm steel pipe LEG BRACKETS NPL 80 mm angle iron profile SUPPORT PLATES FOR SILO LEGS 20 mm SUPPORT MATERIAL FOR CONICAL PARTS: 200 mm C channel CONICAL PARTS MATERIAL ST-37, 8 mm sheet steel SILO BODY MATERIAL ST-37, 8–6–5 mm LIM TOP COVER MATERIAL ST-37, 6 mm LIM FILL CHAMBER: 4" steel chamber to silo legs INTERNAL INSPECTION EXTERNAL INSPECTION Silos equipped with ladder MAINTENANCE PLATFORM INCLUDED CUSTOM SILO PRODUCTION UPON REQUEST, ACCORDING TO PROJECT REQUIREMENTS Coating: 1 coat corrosion protection primer, 2 coats final epoxy paint, total paint thickness: 140 microns ----- SILO CAPACITY 1,000 tons SILO HEIGHT 20,840 mm SILO DIAMETER Ø 8,250 mm NUMBER OF SUPPORT LEGS 8 OUTLET DIAMETER Ø 300 mm NUMBER OF COMPONENTS 191 SILO WEIGHT 72,000 kg (with legs: 75,000 kg) SUPPORT LEG MATERIAL Ø273 x 10 mm steel tube BASE SUPPORT 100 mm C channel LEG PLATES 25–30 mm CONICAL SUPPORT MATERIAL: 160 mm C channel CONICAL PART MATERIAL S235JR, 10 mm LIM SILO BODY S235JR, 8–6–5 mm LIM SILO TOP COVER S235JR, 5 mm LIM FILL PIPE: 4" steel pipe to outlet legs Internal inspection available External manhole available SILO ROOF INCLUDES SAFETY RAILINGS MAINTENANCE PLATFORM STRUCTURAL ANALYSIS AND PRODUCTION PROCESSES ARE CARRIED OUT DEPENDING ON PROJECT REQUIREMENTS.

Sąlyga: naujas, spalva: mėlyna, Gamybos metai: 2025, Year of manufacture: 2025 Usable material: Concrete STABLE CONCRETE PLANT BRAND: POLYGONMACH MODEL: POLYGONMACH S120-135 CONCRETE BATCHING PLANT PLANT MODEL: CONCRETE PLANT WITH TWIN SHAFT MIXER PLANT CAPACITY: Fresh concrete 120-135 m³/hour AGGREGATE HOPPER CAPACITY: 5x30 = 150 m³ CEMENT WEIGHING CAPACITY: 1500 kg WATER WEIGHING CAPACITY: 750 L MIXER CAPACITY: 3000–2000 L PLANETARY MIXER (POLYGONMACH T2000) TOTAL ENGINE POWER: 240 kW NUMBER OF MIXER MOTORS: 2x55 kW GAMAK VOLTAGE: 380V – 50 Hz Fully automated Aggregate bunker and weighing bunker: 1 pc (galvanised) Capacity: 5 x 30 m³ = 150 m³ Bunker discharge chute: 4 pcs/ compartment Sand compartment: 4 pcs Vibrator for each sand compartment: 1 pc OXB / WAM 200/3 Pneumatic cylinder: TEKMAK Pneumatic valves: SEMAKMATIC – ITALY FRY Conditioner: SEMAKMATIC – ITALY Weighing belt conveyor: 1 pc Load cells: 4 x 2000 kg, ZEMIC Conveyor belt: DERBY-BANDSAN Belt size: 1000 mm x 10,500 mm + 1000 x 7000 mm Reduction gearbox: 7.5 kW, + 7.5 kW, 1500 rpm, GAMAK-DİŞSAN DG2 – 250x2 Belt tracking switch: 6 units Belt safety switch: 2 units Belt rupture sensor: 2 units Emergency stop button: 2 units Bearings: SKF series with grease nipples Drums: 10 mm, rubberized Roller bearings: Standard SKF Scraper: V-type, with counterweights Vibrator for weighing bunker: WAM 400/3 2 - Feed conveyor with aggregate supply Width: 1000 mm Hodpfxex D Dgmo Abmsfr Length: 32,000 mm Drive system: belt pulley Drive drum: 10 mm rubberized Electric motor power: 22–30 kW Reducer: Dg 2 series Dişsan DG 2 Bed type: Cast iron bed of SNH series with extra lubrication Belt connection: Half-moon zinc closure Platform: One-sided walkway Belt: TS 542 standard, 4 layers, 4/2 Belt storage switch: 2 units Rope switch: 1 unit Guide roller: 6 units 3 - Plant enclosure The main frame and steel construction, manufactured from high-quality steel and workmanship, comply with ISO9001, CE standards and international requirements, providing a height of 4100 mm to 4250 mm. With an average width of 5000 mm, the main frame enables easy maneuvering and loading of truck mixers, as well as simple operation. Main frame is equipped with platform, handrails, and stairs. 3.1 - Cement weighing bunker: 1 pc Weighing capacity: 1500 kg Load cell: 3 x 3000 kg, ZEMIC Valves: BV1FS250NN, diameter 250 Driver: ACP13 pneumatic actuator Vibrator: 1 pc, WAM 3.2 - Water weighing bunker: 1 pc Weighing capacity: 750 L Valve: WAM, diameter 150 Actuator: ACP13 pneumatic actuator Load cell: 2 x 3000 kg, ZEMIC 3.3 - Additive weighing bunker: 1 pc Weighing capacity: 50 L (2x25 L) Load cell: 1 x 100 kg, ZEMIC Valve: 1 ½’’ TORKx2 Pump: 0.37 kW, Standard – Turkey x2 3.4 - Compressed air equipment: 1 pc Manufacturer: ATLAS COPCO (screw type) Air tank – Pressure and volume: 500 L/min flow rate and volume: 270 L Operating pressure: 7.5 bar Motor power: 4 kW

Sąlyga: naujas, spalva: oranžinė, Usable material: Concrete Unladen weight: 26,000 kg Dimensions (L x W x H): 1,650 x 290 x 430 cm Load compartment volume: 60,000 l GENERAL FEATURES OF THE MOBILE CONCRETE PLANT: Plant capacity: 60 m³/h Control type: Fully automatic Mixer: 1500/1000 twin-shaft mixer, 1 m³ fresh concrete per batch. Concrete plant weight: 27 tons, excluding cement silo. Concrete plant size: 16.5 (L) x 2.8 (W) x 4.2 (H) meters Total motor power: 165 kW, including screw conveyor. Voltage / Frequency: 380 V / 50 Hz Required installation area: 300 m² (excluding storage, truck parking, and office building) Number of operators required: 1 Coating: 1 layer of anti-corrosion primer, 2 layers of final coat epoxy paint, total paint thickness: 140 microns Number of trucks: 1 head truck (silo not included) CONCRETE PLANT DETAILS MANUFACTURER: POLYGON PLANT TYPE: POLYGON PMC60 Hfjdpfjx D Dggex Abmor MOBILE CONCRETE PLANT WITH TWIN-SHAFT MIXER PLANT CAPACITY: 60 m³ of fresh concrete per hour AGGREGATE BUNKER CAPACITY: 4x12 = 48 m³ CEMENT WEIGHING: 600 kg WATER WEIGHING: 300 kg MIXER CAPACITY: 1500-1000 L twin-shaft mixer (PMX 1000) TOTAL MOTOR POWER: 145 kW NUMBER OF DRIVE MOTORS: 18.5x2 kW GAMAK VOLTAGE: 380V - 50 Hz

Sąlyga: naujas, Unladen weight: 75,000 kg Dimensions (L x W x H): 825 x 825 x 2,084 cm Cargo volume: 740,000 l SILO CAPACITY: 1,000 tons SILO HEIGHT: 20,840 mm Hfodpfjx D Dgasx Abmsr SILO DIAMETER: Ø 8,250 mm NUMBER OF SUPPORT LEGS: 8 OUTLET DIAMETER: Ø 300 mm NUMBER OF COMPONENTS: 191 SILO WEIGHT: 72,000 kg (with legs: 75,000 kg) SUPPORT LEG MATERIAL: Ø273 x 10 mm steel tube FOOT SUPPORT: 100 mm C-channel SILO LEG PLATES: 25-30 mm CONICAL SECTION MATERIAL: 160 mm steel C-channel CONICAL SECTION: S235JR, 10 mm sheet SILO BODY: S235JR, 8 - 6 - 5 mm sheet SILO TOP COVER: S235JR, 5 mm sheet FILL PIPE: 4" steel pipe for strengthening legs Internal inspection available External manhole available SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM STRUCTURAL ANALYSIS IS PERFORMED FOR SILOS AND PRODUCTION PROCESSES DEPENDING ON PROJECT REQUIREMENTS.

Sąlyga: naudotas, New: Yes Processable material: Bitumen Unladen weight: 18,000 kg Fully automatic polymer modification plant TECHNICAL SPECIFICATIONS Grinding and homogenizing of polymer (SBS, APP, KRATON, etc.) and bitumen. Feeding: Bitumen-polymer premix Flow rate: max. 15 t/h, density: 1.1 g/cm³ Viscosity: max. 20,000 mPa·s (cP) Temperature: 190°C Solid matter: Machine inlet: max. 3–6 mm, machine outlet: max. 0.2 mm MOTOR 130 kW Speed: 3000 rpm Voltage: 400 V, 50 Hz, 3 phase, starting mode Y / Δ 2. VERTICAL MIXING TANK Frame: - Manufactured as a vertical rectangular profile - Dimensions for a volume of 11 m³ - Tank body made from 5 mm St37 quality plate - Bitumen fill pipe: 3" DN80, PN16, DIN2633, 1 unit; outlet pipe: 3" DN150, PN16, DIN2633; and 3" DN80, PN16, DIN2633, 2 units - Maintenance cover dimensions: 500 x 500 mm b) Heating - External diathermic oil heating - Leak test performed at minimum 6 bar c) Insulation - 100 mm wire mesh rock wool complies with Turkish Standards Institute (TSE) - Outer surface made of stainless steel sheeting, manufactured according to tank dimensions d) Mixing system - 2 × 7.5 kW mixing motors with 60 rpm - Drive system with sprockets - Leak protection at shaft seals - Bearings from SKF or FAG - Fixed paddles mounted to the tank walls for increased dispersion and homogeneous mixing e) Temperature indicators are both digital and analog, with two outputs f) Integrated connection paddle, ladders, and platform included 3. BITUMEN PUMPS - 2 ½ XLA type with oil heating - Pumping capacity: 25 t/h - Coupled with 7.5 kW, 400 rpm geared motor 4. SBS FEED UNIT (POLYMER MODIFIED GRANULE) a) Feed hopper - Slot width: 500 x 500 mm - Made of 4 mm plate - Equipped with a granulate feed helix (30 m³/h capacity) - Frame tube wall thickness: 5 mm, tube diameter: 220 mm - Shaft seal leak protection - Bearings from SKF or FAG - 5.5 kW, 80 rpm geared drive with clutch 5. PIPE NETWORK AND EQUIPMENT a) Pipes - Steel pipes according to DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25) - Mill line: 3" internal pipe, 4" external jacket pipe - Jacket pipes welded as per TSE standards - Bridge pipes at designated points, 1 inch b) Compensators - DN 50, DN 80, PN 16, 400°C c) 3-way and 2-way heated valves - Compliant with TSE standards - Pneumatic control - Operating under high pressure (16 bar) and temperature (230°C) d) Hot oil valves Hodpfx Ajx D Df Nsbmsfr - KLINGER or THERMO brand piston hot oil valve - DN 25 PN16, DN65 PN16, DN50 PN16, ...

Sąlyga: naujas, Unladen weight: 240,000 kg Cargo compartment capacity: 3,000,000 l FULLY AUTOMATIC ASPHALT PLANT 1.1 AGGREGATE BUNKERS (6 x 12 m³) – 6 pcs 1.2 Bunker and dosing belts, 1 + 1 feed 1.3 Distributor and dryer mounted on conveyor – 1 unit 1.4 STATIONARY CHASSIS – 1 1.5 ROTARY DRYER UNIT – 1 1.6 Dryer drum – 1 1.7 Common inlet – 1 1.8 Common outlet – 1 1.9 Burner unit (BALTUR) – 1 SET 1.10 Burner fuel pump – 1 1.11 Burner blower – 1 1.12 Elevator inlet – 1 2.1 MIXER CHASSIS GROUP – 1 2.2 Asphalt mixer + hot aggregate elevator – 1 2.3 Common weighing hopper – 1 2.4 Loading crane and weighing vessel – 1 2.5 Screw conveyor for loading – 1 2.6 Bitumen weighing vessel – 1 2.7 Bitumen pump mixer – 1 2.8 Hot silo (50t) – 3 2.9 Stock filling silo 25 m³ – 2 2.10 Vibrating screen – 1 3 DUST COLLECTION FILTER 3.1 Jet-pulse filter body – 1 set 3.2 Nomex filter bags and cartridges – 1 set 3.3 V spiral dust separator and 1 + 1 bunker set 3.4 Filling silo (25 tons) – 2 sets 3.5 Loading screw conveyor set – 2 3.6 Filter extraction fan – 1 set 3.7 Set 1 for polluted gas duct 3.8 Housing group set 1 4 BITUMEN TANK 4.1 Thermally insulated bitumen tank for oil heating with 50 ton capacity (1 for PMB) with mixer (vertical) – 3 SETS 4.2 3-way pneumatic lining valve group – 2 SETS 4.3 Bitumen pump mixer – 1 SET 4.5 Dosing pipe for bitumen balance to mixer – 1 SET 4.6 Bitumen transfer pump – 1 SET 4.7 Installation of double-walled bitumen pipes – 1 SET 4.8 Bitumen tank for heating oil with 50 ton hot oil capacity – 1 SET Hjdsx D Dfispfx Abmefr 4.9 Three-way valve group with pneumatic lining, 2 SETS 5 CHASSIS FOR FUEL AND THERMAL OIL GROUPS 5.1 1,000,000 kcal/h thermal oil generator – 1 SET 5.2 Oil heating boiler – 1 SET 5.3 Circulation pump for heating oil – 1 SET 5.4 Fuel pump – 1 SET 5.5 Fuel pump – 1 SET 5.6 Compressor for automation, for cabin control software – 1 SET 6 Granulation feeder (fraction feed with fan drive) – 1 SET 7 Cold asphalt recycling system (hopper 5 m³, belt conveyor 500x22000 mm, belt conveyor 800x4000 mm with weighing system) – 1 SET 8 Lining (3 mm layer on 50x50 profile cladding) for aggregate tank and mixer bottom – 1 SET 9 Real-time gas emission measurement and monitoring system (integrated in PLC and plant automation, accessible via internet connection) – 1 SET 10 Dust monitoring PCE-PQC 23US incl. calibration certificate – 1 SET

Sąlyga: naujas, galia: 450 kW (611,83 AG), kuro tipas: dujos, spalva: mėlyna, Gamybos metai: 2021, Year of manufacture: 2021 Unladen weight: 215,000 kg Engine brand: Perkins Load compartment capacity: 4,000 l Robust asphalt plant, 240 tons/hour 1.1 Cold aggregate feeding chassis 5 1.2 Feeder bins and dosing conveyor belts 1 + 1 Hfodjx D Dfcepfx Abmsr 1.3 Collector and dryer mounted on conveyor belt 1 1.4 Stationary chassis 1 1.5 Rotary dryer group 1 1.6 Dryer drum 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner unit (BALTUR) 1 set 1.10 Burner fuel pump 1 1.11 Burner blower 1 1.12 Elevator inlet 1 2.1 Mixer chassis group 1 2.2 Asphalt mixer + hot aggregate elevator 1 2.3 Total weighing hopper 1 2.4 Filler elevator and weighing hopper 1 2.5 Filler screw conveyor 1 2.6 Bitumen weighing hopper 1 2.7 Mixed bitumen pump 1 2.8 Hot aggregate silo (50T) under-sized 1 2.9 Filler silo 25 m³ 1 2.10 Vibrating screen 1 3 DUST COLLECTION FILTER SET 3.1 Jet-pulse filter body 1 set 3.2 Nomex filter bags and cartridges 1 set 3.3 Dust collector with spiral and hopper 1 + 1 set 3.4 Filler silo (25 tons) 1 set 3.5 Filler screw conveyor 1 set 3.6 Filter suction fan 1 set 3.7 Dirty gas channel 1 set 3.8 Housing assembly 1 set 4 BITUMEN STOCK TANK 4.1 40-ton capacity thermal oil heated insulated bitumen tank 4 sets 4.2 3-way pneumatic jacketed valve group 2 sets 4.3 Bitumen transfer pump 1 set 4.5 Mixed bitumen scale supply line 1 set 4.6 Bitumen transfer pump 1 set 4.7 Double-walled bitumen piping installations 1 set 4.8 30-ton capacity bitumen tank for thermal oil heating 3 sets 4.9 3-way pneumatic jacketed valve group 2 sets 5 FUEL AND THERMAL GENERATOR CHASSIS GROUP 5.1 Capacity 1,500,000 kcal/h thermal oil generator 1 set 5.2 Oil-fired boiler 1 set 5.3 Circulating pump for thermal oil 1 set 5.4 Fuel filling pump 1 set 5.5 Fuel pump 1 set 5.6 Automation, control cabin, software, compressor 1 set

Sąlyga: naujas, Unladen weight: 16,000 kg Fully automatic bitumen emulsion system 1. COLLOID MILL (10 m³/h) – 1 unit 2. FOAM TANK (5 m³) – 1 unit 3. BITUMEN FEED PUMP – 1 unit 4. FOAMING SYSTEM – 1 unit 5. PIPE NETWORK AND FITTINGS – 1 set 6. CONTROL PANEL – 1 unit 7. CHASSIS – 1 unit FOAM TANK (1 unit) A frame: - Box profile - Capacity: 5 m³ - Tank body is manufactured from 3 mm AISI 304 stainless steel sheet - Welds are executed using appropriate stainless steel TIG welding b) Heating: - 2-inch stainless steel piping - Oil inlet and outlet pipes are 1 inch, DN50, PN16, DIN 2633 - Tightness test is carried out at a pressure of 6 bar c) Mixing system: - 3 kW, 60 rpm mixing motor Hfjdpfx Abex D Dd Somor - Drive is via sprockets - Leakproofness is ensured at the seals - Bearings are SKF or FAG - Fixed blades are mounted on the outer walls to improve dispersion and ensure a homogeneous mixture d) The temperature displays are both digital and analog, with two outputs provided - Bitumen pump capacity up to max. 8 m³/h - Coupled to 7.5 kW, 400 rpm gear motor - The bitumen meter is a system rated for 10 m³/h a) Piping: - Steel pipes according to DIN 17175 (DN200, DN150, DN100, DN80, DN65, DN25) - The mill line is constructed with 1.5-inch inner pipe and 2-inch outer jacket pipe - Jacket pipes are welded according to TSE standards - Bridging pipes are 0.5 inch at appropriate locations b) Compensators: - DN50, DN80, PN16, 200°C c) 3-way and 2-way heated valves: - Conforming to TSE standards - Suitable for operating conditions at high pressure (16 bar) and high temperature (230°C) d) Hot oil valves: - Hot oil valve, make KLINGER or THERMO, heat-resistant - Sizes: DN25 PN16, DN65 PN16, DN50 PN16 e) Filter: - Equipped with a 3 mm wire inner container, easy and frequent cleaning possible - - The control panel is assembled in accordance with IC standards.

Sąlyga: naujas, spalva: mėlyna, Gamybos metai: 2022, Unladen weight: 300,000 kg Cargo hold capacity: 3,000,000 l Warranty: 24 months 1.1 Combined Aggregate Feeding Chassis 5 1.2 Supply of Hoppers and Dosing Conveyor Belts 1 + 1 1.3 Collector and Dryer mounted on Conveyor Belt 1 1.4 Stationary Chassis 1 1.5 Rotary Dryer Group 1 Hedpfsx D Ddxjx Abmofr 1.6 Dryer Body 1 1.7 Aggregate Inlet Head 1 1.8 Aggregate Outlet Head 1 1.9 Burner Group (BALTUR) 1 set 1.10 Burner Fuel Pump 1 1.11 Burner Blower 1 1.12 Elevator Inlet 1 2.1 Mixer Chassis Group 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Total Scale Hopper 1 2.4 Filler Elevator and Weighing Hopper 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen Weighing Hopper 1 2.7 Mixing Bitumen Pump 1 2.8 Hot Aggregate Silo (50T) Undersize 1 2.9 Filler Silo 25 m³ 1 2.10 Vibrating Screen 1 3 Dust Collection Filter Set 3.1 Jet-Pulse Filter Body 1 set 3.2 Nomex Filter Bags and Cartridges 1 set 3.3 Dust Collector V Spiral and Hopper 1 + 1 set 3.4 Filler Silo (25 tons) 1 set 3.5 Filler Screw Conveyor 1 set 3.6 Filter Extraction Fan 1 set 3.7 Dirty Gas Duct 1 set 3.8 Housing Group 1 set 4 Bitumen Storage Tank 4.1 40 tons capacity thermal oil-heated insulated bitumen tank 4 sets 4.2 3-way pneumatic jacket valve group 2 sets 4.3 Bitumen Transfer Pump 1 set 4.5 Mixing Bitumen Weighing Line 1 set 4.6 Bitumen Transfer Pump 1 set 4.7 Double-walled Bitumen Pipe Installations 1 set 4.8 30 tons capacity bitumen container for thermal oil heating 3 sets 4.9 3-way pneumatic jacket valve group 2 sets 5 Chassis Group for Fuel and Thermal Oil Generators 5.1 1,500,000 kcal/h capacity thermal oil generator 1 set 5.2 Heavy Oil Boiler 1 set 5.3 Circulation Pump for Hot Oil 1 set 5.4 Fuel Refill Pump 1 set 5.5 Fuel Pump 1 set 5.6 Automation-Control Cabin-Software-Compressor 1 set

Sąlyga: naudotas, Naudojama medžiaga: betonas Hfsdpfxox D Ddlj Abmor

Sąlyga: naujas, spalva: oranžinė, Gamybos metai: 2025, Usable material: Concrete Unladen weight: 8,500 kg Loading chamber capacity: 30,000 l Warranty: 24 months Possible bunker configurations for fractions: 4 x 6 m³ or 2 x 12 m³ Collecting conveyor for fractions: 650 mm x 2,450 mm Main chassis Cement weighing hopper – 300 kg Water weighing tank – 200 l (galvanised) Additive weighing tank – 50 l (galvanised) Compressed air system – Pressus POLYGON P500 planetary mixer: 0.75 / 0.5 m³ (Brand: Polygon) 18.5 kW Ermaksan gearbox, Gamak motor Automation system for power supply and control panel – PLC (Siemens) + computer, printer, touch panel, and electrical components Water pump (20 m³/hour) Tandem axles, tyres and hook for carrying frame for easier transport Handrails, maintenance platform, and ladders galvanised 800x13 500 mm belt conveyor for transmixer with special scraper (height 4 metres) Cement silo (50 tonne) + cement screw conveyor (WAM) 168 x 5,000 mm + silo equipment (WAM) (silo filter, air jet, safety valve, max-min level indicator with alarm systems) (all WAM) CONCRETE PLANT SPECIFICATIONS Brand: Polygon Type: Polygon PAC30 With planetary mixer Fresh concrete production capacity: 30 m³/h Bunker volume for fractions 4 x 6 = 24 m³ Cement weight: 300 kg Water weight: 150 kg Mixer capacity: 750-500 l planetary mixer (P S1000) Total motor power: 65 kW Mixer motor power: 18.5 kW Gamak Voltage: 380V – 50 Hz METAL STRUCTURE / MAIN CHASSIS The main chassis is designed based on on-site experience to facilitate transportation, installation, maintenance, and operation processes. Aggregate bin Weighing capacity: 24 m³ Fraction bin volume: 4 x 6 m³ chambers, 1 discharge door per chamber Vibrator: 2 units Kemp 200/3 Common dosing belt Dimensions: 650 mm x 2,450 mm Gear motor: 3 kW Drive drum: 10 mm rubber-coated Type: Cast iron felt series SNH with lubrication Conveyor belt: TS 542 Standard, 4 layers, 4/2 Collective weighing hopper Weighing capacity: 1 m³ Load cell: 4 x 1,000 kg Zemic Vibrator: 2 units Kemp 200/3 Cement weighing tank Weighing capacity: 300 kg Load cell: 3 x 500 kg Zemic Pneumatic valve: Wam Bv1fs250nn, diameter: 250 mm Feeder: pneumatic drive Wam Acp13 Vibrator: 1 unit Kemp 100/3 Water weighing tank Weighing capacity: 200 l Load cell: 3 x 500 kg Zemic Pneumatic valve: Bv1fs150nn – diameter: 150 mm Driver: pneumatic actuator Acp13 Additive weighing tank Weighing capacity: 20 l Load cell: 1 x 100 kg Zemic Pneumatic valve: 1" TORK Pump: 0.37 kW Hedpfxjx D Ddfe Abmefr Weighing system: 1 chemical dosing system Piston air compressor The system has a stop-start operation, belt-driven. It is equipped with a three-phase electric motor. Flow rate: 200 l/min. Pressure: 6–8 bar MIXER TECHNICAL SPECIFICATIONS Application value / per unit capacity Load capacity m³/h: 0.5 Fresh concrete capacity m³: 0.5 Capacity l: 750 Gearbox/motor kW: 18.5 Ermaksan / Gamak @ 1,500 rpm Side wall thickness mm: 8 HARDOX Mixer body thickness mm: 10 HARDOX Number of scrapers: 1 Number of mixing arms: 2 Scraper and mixing paddles: 32 mm NI-HARD-4

Sąlyga: naujas, galia: 154 kW (209,38 AG), kuro tipas: hibridas, spalva: mėlyna, Gamybos metai: 2022, Fuel type: Hybrid (electric and petrol) Usable material: Concrete Unladen weight: 38,000 kg Dimensions (L x W x H): 1600 x 280 x 420 cm Engine manufacturer: Siemens Cargo bay capacity: 135,000 l UNIT STORAGE FOR AGGREGATES, FRACTIONS IN BINS – 4 x 30 m³ 1 AGGREGATE WEIGHING CONVEYOR 1000x13000mm 1 PORTABLE CONVEYOR FOR AGGREGATES – 1000 x 11,000 mm 1 TWIN SHAFT MIXER WITH LUBRICATION SYSTEM – 3 m³ 1 CEMENT WEIGHING BIN – 1500 kg 1 WATER WEIGHING BIN – 1000 l 1 ADDITIVE WEIGHING BIN – 50 l 1 AIR COMPRESSOR – 800 l 1 CONTROL CABIN WITH AIR CONDITIONING 1 ELECTRICAL CABINET, PC AND PLOTTER, OPERATOR PANEL 1 MOBILE CHASSIS – twin-axle 1 GENERAL FEATURES OF THE PLANT Fresh concrete production capacity: 120–135 m³/h Control type: fully automatic Mixer: 4500/3000 twin-shaft mixer, 3 m³ fresh concrete. Plant weight: 45 tons, excluding cement silo. Plant dimensions: 16.5 (L) x 2.8 (W) x 4.2 (H) meters x2 Total motor power: 215 kW, including screw conveyor. Voltage / Frequency: 380 V / 50 Hz Required area for installation: 300 m² (excl. storage areas, truck parking, and administration building) Number of operators required: 1 Coating: 1 layer of corrosion protection, 2 layers FINAL COAT EPOXY PAINT, total paint thickness: 140 microns Number of trucks: 1 tractor unit + 2 tipper trucks BATCHING PLANT DETAILS POLYGON brand BATCHING PLANT TYPE PMC120 Hsdpex D Dc Uofx Abmjfr TWIN SHAFT MIXER PLANT CAPACITY for fresh concrete production 120 m³/hour AGGREGATE HOPPER VOLUME 4x30 = 120 m³ CEMENT WEIGHING CAPACITY 1500 kg WATER WEIGHING CAPACITY 1000 kg MIXER CAPACITY 4500-3000 L TWIN SHAFT MIXER (PMX 3000) TOTAL PLANT POWER 215 kW NUMBER OF MOTORS FOR MIXER DRIVE 55x2 kW GAMAK VOLTAGE 380 V – 50 Hz TECHNICAL SPECIFICATION OF THE MIXER Value – Feature / Unit – Capacity Input capacity m³/h 3 Fresh concrete capacity m³ 3 Capacity L 4500 Gearbox / Motor kW 55x2 ERMAKSAN / GAMAK 1500 rpm Side wall thickness mm 8 HARDOX Mixer housing m³ 10 HARDOX Number of scrapers pcs. 4 Number of mixing arms pcs. 14 Scraper and mixing paddles mm 32 mm NI-HARD-4 Motor power kW 110 Water distributor available Pneumatic discharge cover kW available Maintenance and safety valves available Emergency stop switch available Mixer cover system hydraulic Cover open/close sensor available

Sąlyga: naudotas, Gamybos metai: 2022, Naudojama medžiaga: betonas Hfedpex D Dc Iefx Abmsr

Sąlyga: naudotas, Naudojama medžiaga: betonas Hfsdpox D Dczjfx Abmor Krovinių skyriaus talpa: 100 000 l

Sąlyga: naudotas, Naudojama medžiaga: betonas Hodpfx Abex D Dcuomjfr

Sąlyga: naudotas, Naudojama medžiaga: betonas Hsdpfx Aox D Dcnobmofr

Sąlyga: naujas, galia: 210 kW (285,52 AG), spalva: oranžinė, Naudojimo paskirtis: kasyba Tuščias svoris: 44 000 kg Mobilus, sausas, pirminio-antrinio tipo trupinimo įrenginys, Q = 80–150 t/h Hjdjx D Dchopfx Abmsfr Trupinimo įrenginys naudojamas darbui su minkštais ir vidutinio kietumo uolienomis. Maksimalus įeinančios frakcijos dydis – 650 mm, Bunkeris (užpildymas savivarčiu, ratiniu krautuvu arba ekskavatoriaus kaušu), Grizzly arba ritininės grotelės moliui, žemei pašalinti, Gamybinis pajėgumas: 80–150 tonų/val., Smūginis trupintuvas, Sietas su 4 aukštais, Trijų ašių puspriekabė, Visi transporteriai, Įrenginio valdymo skydas, Svoris 44 tonos, Įrenginio galia: P = 210 kW, SKF guoliai ir Siemens elektronika iš Vokietijos. 2 metų garantija.

Sąlyga: naujas, spalva: kitas, Intended use: Mining We manufacture mobile impact crushers for primary, primary-secondary, or tertiary crushing. Mounted on a trailer, equipped with a hopper, conveyor belt, and grizzly feeder to separate clay and soil from the stone. Combinations of crushers and screens are also available, with screening units featuring two, three, or four decks. The final products are base layers ("tampons") in sizes of 0-30 mm, 0-60 mm, or 0-100 mm, or asphalt construction fractions: 0/4, 4/8, 8/11, 11/16, 8/16, 16/22, 16/32 mm. The plant is designed for processing soft and medium-hard rock. Advancements in technology mean that today, impact crushers can operate even in demanding working conditions. On tertiary impact crushers in challenging tasks, the impact hammers can pre-crush up to 40,000 m³ of gravel or volcanic rock. Hfjdpfx Aex D Dcbsbmsr The plant is powered either via cable from a transformer station or by a generator. The configuration and size of the plant are customized according to project requirements. ----- - ----- - ----- Mining crushing plants are available as trailer-mounted units: Jaw crushers, cone crushers, vertical shaft impactors, various separation solutions; DRY and WET PROCESSING, including washing systems. ----- - ----- - ----- All plants come with a 2-year warranty. Service and all spare parts are available.

Sąlyga: naujas, spalva: oranžinė, Usable material: Concrete Unladen weight: 26,000 kg Dimensions (L x W x H): 1,650 x 290 x 430 cm Load compartment volume: 60,000 l GENERAL FEATURES OF THE MOBILE CONCRETE PLANT: Plant capacity: 60 m³/h Control type: Fully automatic Mixer: 1500/1000 twin-shaft mixer, 1 m³ fresh concrete per batch. Concrete plant weight: 27 tons, excluding cement silo. Concrete plant size: 16.5 (L) x 2.8 (W) x 4.2 (H) meters Total motor power: 165 kW, including screw conveyor. Voltage / Frequency: 380 V / 50 Hz Required installation area: 300 m² (excluding storage, truck parking, and office building) Number of operators required: 1 Coating: 1 layer of anti-corrosion primer, 2 layers of final coat epoxy paint, total paint thickness: 140 microns Number of trucks: 1 head truck (silo not included) CONCRETE PLANT DETAILS MANUFACTURER: POLYGON PLANT TYPE: POLYGON PMC60 MOBILE CONCRETE PLANT WITH TWIN-SHAFT MIXER PLANT CAPACITY: 60 m³ of fresh concrete per hour AGGREGATE BUNKER CAPACITY: 4x12 = 48 m³ CEMENT WEIGHING: 600 kg WATER WEIGHING: 300 kg MIXER CAPACITY: 1500-1000 L twin-shaft mixer (PMX 1000) TOTAL MOTOR POWER: 145 kW NUMBER OF DRIVE MOTORS: 18.5x2 kW GAMAK VOLTAGE: 380V - 50 Hz Hjdpfx Absx D Db Remofr

Sąlyga: naujas, spalva: mėlyna, Intended use: Mining Unladen weight: 120,000 kg Fully automatic stationary crushing and screening plant Hard rock crusher for granite, basalt, and gabbro = +160 MPa Max. feed size: - 800 mm 35 m³ vibrating grizzly feeder 1 unit Jaw crusher 1100x850 mm 1 unit Belt conveyor 1200x6000 mm 1 unit Belt conveyor 1200x3300 mm 1 unit 30 m³ hopper 1 unit Metso HP400 cone crusher (chassis, software, motor) 1 unit (can also be a Turkish version of the cone crusher) Vibrating screen 2400x6000 mm 1 unit Conveyor belt 800x30000 mm 1 unit Conveyor belt 800x6000 mm 1 unit Conveyor belt 800x17000 mm 1 unit Belt conveyor 1000x33000 mm 1 unit Filling hopper with 20 m³ dispenser 2 units VSI900 2x200kW vertical shaft impact crusher 2 units Belt conveyor 1000x10000 mm 1 unit Conveyor belt 1000x28000 mm 1 unit Hodpfxsx D Db Ds Abmjfr Vibrating screen 2200x6000 mm 2 units Conveyor belt 800x10000 mm 1 unit Belt conveyor 600x10000 mm 1 unit Conveyor belt 600x20000 mm 5 units Conveyor belt 1000x2000 mm 1 unit Air-conditioned operator control room 1 unit

Sąlyga: naujas, spalva: mėlyna, Gamybos metai: 2024, Purpose: Mining Unladen weight: 54,000 kg Payload: 2,000 kg Gross vehicle weight (GVW): 56,000 kg Dimensions (L x W x H): 300 x 500 x 300 cm Loading area volume: 30,000 l Hopper, vibrating feeder, scalp or grizzly screen, and jaw crusher We are advertising the primary jaw crusher for demanding working conditions: • Dimensions: 1000 x 4000 mm • Feed hopper: 25 m³ • Throughput: 250–350 tons/hour • Body liners: HARDOX 450 – 10 mm • Weight: 22.5 tons • Vibro motors: 2 x 4.4 kW – Brand: KEMP-MEGATECH, Origin: ITALY Hsdpfx Aox D Dbwobmofr • Walkways are included for servicing around the plant. Our main assembly, service, and spare parts. The warranty on the machine or plant is two years. NOTE: We manufacture all types of crushers and screening plants for every capacity!

Sąlyga: naujas, Unladen weight: 120,000 kg Cargo volume: 160,000 l STANDARD CONDITIONS The plant is designed for the production of 160 t/h of asphalt mix with a finished product at an initial moisture content of 4% and 160°C under the following standard conditions: Hfodpfsx D Dbqex Abmjr • Aggregate temperature at dryer inlet: 10°C. • Sea level altitude • Average density of feed aggregates: 1,650 kg/m³ • Heavy fuel oil no. 6 calorific value ≥ 9,200 kCal/kg • Heavy fuel oil no. 4 calorific value ≥ 9,700 kCal/kg • Calorific value for diesel oil ≥ 10,200 kCal/kg • Natural gas calorific value ≥ 7,600 kCal/kg • Temperature increase of hot aggregates: 160 K • Residual moisture content in the mix: 0.3% • Max. aggregate size: 40 mm • 35% material passing through 3 mm sieve • Material is non-porous and non-hygroscopic with normal shape • Production tolerance rate according to environmental and parameter conditions: ±4% COLD AGGREGATE BUNKERS • Four cold aggregate bins made from 5 mm St 37 steel plate must be provided, each with an approximate capacity of 20 m³ and manufactured separately. • The bins must have a 800 mm high top extension fabricated from 6 mm plate to prevent material overflow. • Bunker discharge must be equipped with a movable unit. • Discharge flow from each bin must be optionally frequency-controlled (speed-controlled) and adjustable via the computer screen. • The discharge rate for each bunker must be settable via manual gates that can be mounted to each bin. • A warning system must be in place for aggregate run-out from the bunkers, with a warning indicator on the computer screen to alert the operator. • Vibrator motor, controlled from the computer screen, must be installed to facilitate material flow and prevent clogging when handling fine materials. • A conveyor belt system must be installed under each bin to ensure reliable material flow. • Each bunker must be fitted with modular grids made from 10x50 mm plates with 10 mm diameter. • Silo loading width must be 3000x2400 mm. • An emergency stop rope system must be provided. • Possible belt faults must be displayed on the computer screen. 2. SUB-BUNKER – COLD AGGREGATE COLLECTING BELT • The horizontal belt must transport material drawn from each bin separately and in a controlled fashion to the inclined dryer feed belt, and provide material flow to a plant with 160 t/h capacity. • The rubber belt must be 10 mm thick, 800 mm wide, 4-ply with EP 125 class fabric. • Belt start/stop must be controlled from the computer screen. For emptying bins at the end of season, the belt must be run in reverse independently from other units. • The horizontal belt chassis must be made from steel construction, ensuring smooth operation and equipped with a belt tensioning system. • Each end of the belt must have a separation system. • Drive drum must be rubber-coated and have a 1-degree taper. • In emergencies...

Sąlyga: naudotas, New: Yes Hodpfx Abex D Dbkemsfr Color: Silver Usable Material: Bitumen Unladen Weight: 9,500 kg Cargo Space Volume: 50,000 l BITUMEN TANK (50 TONS) • The tank capacity must be 50 tons. • The tanks must be manufactured in accordance with TSE and Highway Commission standards. • The tank must be equipped with a thermal oil heating system. • Seamless serpentine piping system for heating • The bitumen temperature must reach mixing temperature • The fuel tank must include a level and temperature indicator, suction nozzle, filling port and ventilation system, inspection hatch, and drain. • There must be support legs under the tank, and its surface must be insulated with 50 mm rock wool and covered with 0.80 mm galvanized sheet metal. 1. THERMAL OIL GENERATOR • The generator capacity must be 2,000,000 kcal/h. • The system must be designed for diesel fuel operation. • The generator must include a 1,500 l supply tank. • The generator must be horizontal, have a seamless steel-drawn thermal oil line, be double-walled, and of circulating body type. • The generator body must be insulated with 100 mm rock wool and covered with aluminum sheeting. • The generator system must be manufactured according to production standards and must include an expansion tank, a degasser, oil filter, valves, and a fully automatic ignition-controlled burner, control panel, pump, and necessary safety equipment. • The serpentine coil must be made of at least 30 m² of seamless steel pipe. • The generator must be equipped with a coupled warning system to protect the entire system in case of hazardous situations due to high oil level or decreasing heat transfer oil level. • The burner system must be designed for automatic activation according to the operational temperature setting of the heat transfer oil. • The system must be manufactured as a complete package.

Sąlyga: naujas, spalva: pilkas, Unladen weight: 35,000 kg Dimensions (L x W x H): 360 x 360 x 1,250 cm Cargo hold volume: 384,000 l 500 TON CEMENT SILOS, TECHNICAL SPECIFICATIONS SILO CAPACITY: 500 tons, 385 m³ (based on specific cement density of 1.3 tons/m³) SILO HEIGHT: 19,945 mm SILO DIAMETER: Ø 6,180 mm NUMBER OF SILO LEGS: 6 OUTLET DIAMETER: Ø 300 mm NUMBER OF COMPONENTS: 250 SILO WEIGHT: 28,000 kg (incl. legs: 35,000 kg) LEG MATERIAL FOR SILO: Ø273 x 12 mm steel pipe SILO FEET BRACKETS: NPL 80 mm angle profile SILO SHELL PLATES: 20 mm CONICAL PARTS MATERIAL: 200 mm steel channel CONICAL PARTS: ST-37, 8 mm sheet steel SILO BODY MATERIAL: ST-37, 8 - 6 - 5 mm sheet TOP LID MATERIAL: ST-37, 6 mm sheet FILL CHAMBER: 4" steel chamber to silo legs INTERNAL INSPECTION EXTERNAL INSPECTION Hjdpfxox D Dbds Abmofr Access ladder installed on silos MAINTENANCE PLATFORM INCLUDED We manufacture silos based on requested specifications or individual project requirements. Painting: 1 layer of anti-corrosion primer, 2 layers of final coat epoxy paint, total paint thickness: 140 microns