Pneumatiniai Pistoletai pirkti naudotą (1 909)

Būklė: geras (naudotas), Pneumatic grease gun, air-operated lubrication press, grease pump - Grease gun: pneumatic, air-operated lubrication press, mobile version - Container capacity: approx. 100 liters / Ø 462 x 625 mm Dkodsi Agxqepfx Ag Noi - Overall dimensions: Ø 606 x H1020 mm - Weight: 63 kg

Gamybos metai: 2017, veikimo valandos: 3 h, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2051476364, From our demonstration tool inventory, inspected and fully functional: Used Desoutter SDT035-T2200-R4Q pneumatic pistol screwdriver with ratchet clutch Dedpfx Agev Imyus Nski with push-to-start function Drive: Hex 1/4" Torque: 1.0 to 3.5 Nm No-load speed: 2200 rpm Length: 212 mm Weight: 1.1 kg Other tools for industrial production and maintenance available on request.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, KATALOGO NUMERIS 7558 TECHNINIAI DUOMENYS - pakrovimo laukai: 2 - šoniniai spaustuvai, reguliuojami rankiniu būdu: 2x4 vnt. - pneumatiniai vertikalūs spaustuvai: 2x4 vnt. - maksim. klijuojamų elementų ilgis: 3300 mm - maksim. klijuojamų elementų aukštis: 1020 mm - maksim. klijuojamų elementų storis: 100 mm - matmenys (ilgis/plotis/aukštis): 4270x1600x2000 mm - svoris apie: 800 kg PRIVALUMAI Dsdeyarabjpfx Ag Nski – dvi darbo zonos – klijavimo ilgis 3300 mm – pneumatiniai cilindrai – naudotas presas, labai gera būklė Grynasis kaina: 10 900 PLN Grynasis kaina: 2 600 EUR pagal 4,2 EUR kursą (Kainos gali keistis dėl didesnių svyravimų)

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), LARIUS 10:1 Pneumatic Press For sale: Pneumatic press from the renowned manufacturer LARIUS, made in Italy. This device is designed for dispensing high-viscosity liquids—ideal for greases, adhesives, industrial paints, silicones, etc. Technical data: • Ratio: 10:1 • Max. fluid pressure: 70 bar / 1,015 psi • Operating air pressure: 3–7 bar (40–100 psi) • Output: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 Djdpfswqx H Rox Ag Neki • Manufacturer: LARIUS – Italy Condition: Very good

Būklė: geras (naudotas), For sale: individual units of original deep hole drilling tools from Botek (Germany) – a renowned manufacturer of precision metalworking tools. Single-lip drills with internal cooling, made from K15B carbide – extremely hard and wear-resistant. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the tool body • Material: K15B ultra-fine grain carbide • Suitable for steel, stainless steel, aluminum, bronze, and engineering plastics The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulics industries, and toolmaking. Condition: New and used (in operation), but in good technical shape. Some may require re-sharpening – an ideal base for professionals. //// PRICE GIVEN PER PIECE ///// Dkedpswg R I Eefx Ag Nei

Būklė: labai geros būklės (naudotas), For sale: a complete, industrial pneumatic press in a workshop housing, ideal for punching, pressing, stamping, or other assembly processes. The set includes: • Pneumatic column press with a robust steel construction • Control valve, actuator, and pneumatic distribution system • Integrated control panel with emergency stop switch • Steel work table with adjustable side guides • Power cabinet, distribution box, and cable management • Mobile table with transport brake Drive: Pneumatic supply Control: Solenoid valves, start/stop buttons Dodpfx Aoud Rddeg Njki Power supply: 230 V (electrical system built into the base) Technical condition: Very good. Used, fully functional set ready for use in a production facility. Industrial-grade construction, not for amateur use.

Būklė: labai geros būklės (naudotas), Parduodu originalų J.D. Neuhaus PROFI pneumatinį keltuvą, modelis LN-1T, su 250 kg (0,25 t) keliamąja galia. Pagamintas Vokietijoje, 1991 m., gamintojas J.D. Neuhaus Hebezeuge GmbH & Co., Witten-Heven – pasaulio lyderis pneumatinių kėlimo sistemų srityje. Techniniai duomenys: • Modelis: PROFI LN-1T • Kėlimo galia: 250 kg (0,25 t) • Gamybos metai: 1991 • Maitinimas: oras 6 bar • Oro sunaudojimas: apie 3–4 m³/min • Grandinė: plieninė, 5 x 15 mm pagal DIN 5684-8 • Valdymas: dviejų svertų (aukštyn / žemyn) • Svoris apie 35 kg Būklė: • Naudotas, techniškai tvarkingas. • Pilnas komplektas su kabliu, valdymo vožtuvu ir grandinės maišeliu. • Natūralūs naudojimo požymiai – be mechaninių pažeidimų. Pritaikymas: Skirtas įrankių, detalių ir elementų kėlimui dirbtuvėse, surinkimo linijose, pramonės įmonėse ir ATEX zonose (priklauso nuo versijos). JDN konstrukcija užtikrina patikimumą ir ilgaamžiškumą – gaminama Vokietijoje, naudojama aviacijos, naftos chemijos ir automobilių pramonėje. Dksdpfx Agjxtfnwo Nei

Būklė: labai geros būklės (naudotas), spaudimo jėga: 5 t, For sale: Schling DUO 5T pneumatic press. Dkodpeudph Uofx Ag Nsi

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Pneumatic clamp ensuring precise pressing of the material onto the saw table during cutting. This significantly increases the accuracy and quality of the cut, facilitating and speeding up panel sizing operations. The clamp is very easy to install and operate. Application of a woodworking pneumatic clamp for a panel saw The lack of proper pressure securing the panel on the saw table can cause a number of issues that significantly impact the efficiency and quality of the cutting process. These issues include: - Uncontrolled chipping: Without solid clamping, the panel isn't held securely on the table, which during cutting can result in uncontrolled chips or splinters. This poses a safety risk to operators and may damage both tools and workpieces, raising production costs. - Excessive material waste: Insufficient pressure can allow the panel to shift during cutting, leading to improper cuts and increased material loss. This may necessitate additional cuts or even complete rejection of the workpiece. Djdpfx Asvxtcqog Neki - Frayed panel edges: Without stable clamping, vibration and inaccurate cutting may occur, resulting in frayed edges. This not only detracts from the panel’s visual appeal but also from its usability, especially for finishing materials. Benefits of the 3200 mm two-zone pneumatic clamp for panel saws: The solution to these problems is the use of a pneumatic clamp, which ensures the material is firmly pressed against the panel saw table. Key benefits include: - Increased cutting accuracy: The pneumatic clamp ensures stable, even holding of the material, resulting in higher cutting precision and preventing uncontrolled chipping and frayed edges. - Improved cutting quality: With a stable hold, the quality of the cut is significantly improved. Panels are cut cleanly and undamaged, enhancing their value and appearance. - Faster, easier panel processing: Reliable clamping allows operators to work more efficiently and safely, accelerating panel processing and increasing production output. - Easy installation and operation: The pneumatic clamp is straightforward to install and use, requiring no complex procedures and allowing for easy operation. - Two-zone clamping: The pneumatic clamp features two zones (each side equipped with two cylinders), allowing independent control for each side of the saw table. This provides greater flexibility and allows for adaptation to various materials and production requirements. In summary, the pneumatic clamp is a reliable solution for improving panel cutting quality, precision, and efficiency, helping save time and material while reducing the risk of damage and accidents. Technical specifications Clamp length: 3200 mm Material height: 100 mm Number of cylinders: 4 Operating pressure: 2.0 bar Manufacturer: Cormak

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, CORMAK BBM40PNEU Hinge Boring Machine – Precision Fitting Machining for Furniture Hardware The CORMAK BBM40PNEU hinge boring machine is a compact, efficient, and easy-to-operate woodworking drill, specifically designed for precise drilling of furniture hinge holes. This machine is ideally suited for furniture production, offering repeatable drilling and stable tool guidance. Thanks to its intuitive design and robust components, the BBM40PNEU ensures high-quality operation while maintaining simplicity of use. Key Features of the Machine - Pneumatic System – Pneumatic spindle lowering provides convenient and precise positioning as well as repeatable drilling, significantly increasing efficiency and quality when fitting hinges. - Pneumatic System with Quick Couplers – Enables easy disconnection of the machine from a stationary compressed air supply, which, combined with its compact construction, allows for use as a hand-held drill directly on-site. - Precision Drilling for Furniture Hinges – An adjustable depth stop located at the rear ensures full control over drilling parameters, minimizing the risk of material damage. - Compact and Stable Construction – A rigid base with a large worktable (350 x 300 mm) provides operator comfort and work safety. - Very Powerful 1.1 kW Motor – A uniquely powerful 1.1 kW motor, unattainable in competitive machines, guarantees adequate torque for working with Blum-type hinges and other hardware systems. - 3 Working Spindles – Allow simultaneous drilling of the main hinge hole and side panel pilot holes. Dksdpoxzdhrjfx Ag Nji Applications The CORMAK BBM40MAN hinge boring machine is used in: - Kitchen, bathroom, and office furniture production, - Carpentry workshops and maintenance departments, - Service shops specializing in hardware installation, - Schools and training centers focusing on woodworking. Standard Equipment - 3-spindle drilling head for hinge boring, - Pneumatic fence travel (110 mm), - Adjustable depth stop, - Worktable 300 x 260 mm, - Powerful 1.1 kW motor (230 V), - Set: 35 mm boring bit + two 2 mm drill bits for BLUM hinges Technical Data Table dimensions: 300 x 260 mm Fence travel: 110 mm Spindle-to-table distance: 130 mm Tool shank diameter: 10 mm Number of spindles: 3 Spindle speed: 2,800 rpm Workpiece clamping: manual Control: pneumatic Motor: 1.1 kW Power supply: 230 V Overall dimensions: 350 x 500 x 550 mm Weight: 20 kg

Gamybos metai: 2019, būklė: labai geros būklės (naudotas), Load capacity: max. 360 kg Dsdpfopu D Dzox Ag Nski Extendable: 700 mm x 1400 mm Rotation angle about longitudinal pivot: 360°

Būklė: naudotas, Pneumatinis skylučių skylių pjovimo įrenginys TÜNKERS arba DE-STA-CO, pneumatinis jėgos cilindras Suspausto oro staklės, štampavimo stovas, štampavimo įrenginys, štampavimo stovas Pagaminimo metai: 2019 Modelio Nr.: 141-1040F Štampavimo stovo Nr.: B-13-26/100 Presavimo jėga: 4 t (40 kN prie 8 bar) Djdpfoxf Uqxsx Ag Noki Oro jungtis maks. 8 bar Iškyša 100 mm Stovo plotis 60 mm Skylių diametras: Ø 2-13 mm Skylių diametras (įmontuotas štampus): Ø 4 mm Matricos diametras (išorinis): Ø 22 mm - Atstūmimo įtaisas su Vulkollan poliuretano elastomeru Matmenys I x P x A: 280 x 110 x 480 mm Svoris: 36 kg Labai gera būklė

Gamybos metai: 2015, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, The Sv‑63P pneumatic butt welding machine features a robust vertical frame design incorporating vertical clamping jaws and a sliding movable platen. Clamping is performed via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages connected to a horizontal cylinder for pressing the workpiece together. The carriage travel is limited in both directions—for both pressing and opening—and the clamping jaw distance can be adjusted according to the cross-section or diameter of the workpiece. Clamping with a preset jaw distance is actuated by foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding modes. After welding, the clamping jaws are lifted and the carriages return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage regulation is achieved using thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws through laminated conductors. Inside the machine, a power board with a thyristor and a main control board ensure smooth operation. An air preparation unit with a pressure regulator for setting the clamping force is located on the machine cover. The main switch to activate the unit is located on the controller for setting welding parameters. Dkjdpfx Agoyqr Sxj Noi

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, darbinis plotis: 550 mm, darbinis ilgis: 2 950 mm, working area 2950x550mm 10 arms Dodpfx Aeqfactsg Nski pneumatic clamps arms adjustable manually

Būklė: naudotas, Gamybos metai: 2005, Spaudimo galia 30 t Eiga 190 mm Stovo plotis 440 mm Šoninis stovo praėjimas 450 mm Montavimo aukštis (viršuje, reguliuojamas viršuje) 350 mm Stalo paviršius 595x450 / 440x595 mm Stalo aukštis virš grindų 725 - 900 mm Stalo reguliuojamumas 175 mm Stūmoklio paviršius 90 mm Variklio galia 0,5 kW Svoris 1,20 kg Dkedsyfwvrepfx Ag Noi Užimama erdvė (PxGxA) 1,5 x 1,0 x 2,9 m SPECIALUS PASIŪLYMAS kaip yra, BE papildomų darbų pakrauta ant sunkvežimio Pagrindinis įrenginys Kraftpaket K 30.181-190.10 su bendra eigos ribojimu, nuo pasisukimo apsauga Universalus stovas UUM 1-200.031 Darbo aukštis reguliuojamas Bendra eiga 190 mm / efektyvioji eiga 10 mm

Būklė: naudotas, Pneumatiniai vožtuvai iš GEA, Alfa Laval, APV. (10 palečių) Apie 150–170 vnt. Dkodpfxoyk Hlye Ag Nji Dvi paletės su Alfa Laval vožtuvų valdymo galvomis. Viena paletė su nenaudotais vožtuvais.

Būklė: nepatikrintas (naudotas), Gamybos metai: 1995, Funkcionalumas: nepatikrintas, spaudimo jėga: 4 t, stalo plotis: 245 mm, stalo ilgis: 360 mm, eigos ilgis: 50 mm, Nėra minimalios kainos – garantuotas pardavimas didžiausią pasiūliusiam! Dkjdoyn Hncjpfx Ag Nsi Pateikus pasiūlymą, įsipareigojama atsiimti prekę laiku – arba nuo 2026-05-11 iki 2026-05-13, arba nuo 2026-05-18 iki 2026-05-21! TECHNINIAI DUOMENYS Didž. eiga: 50 mm Didž. presavimo jėga: 4 t Stalo matmenys: apie 360 x 245 mm ĮRANGOS DUOMENYS Matmenys ir svoris Matmenys (I x P x A): 800 x 700 x 1800 mm Įrenginio svoris: 600 kg ĮRANGA Ant pagrindo rėmo Išorinė nuoroda: Groven - Lotas 5

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, stalo plotis: 200 mm, stalo ilgis: 300 mm, Nėra minimalios kainos – garantuotas pardavimas aukščiausią pasiūlymą pateikusiam! Pasiūlymo pateikimas įpareigoja laiku atsiimti prekę arba 2026-05-11 – 2026-05-13, arba 2026-05-18 – 2026-05-21 laikotarpiais! TECHNINIAI DUOMENYS Stalo matmenys: 300 x 200 mm ĮRANGOS DUOMENYS Matmenys ir svoris Matmenys (I x P x A): 500 x 500 x 1400 mm Įrenginio svoris: 200 kg Dkodjyn Hcmspfx Ag Nji Išorinis nuoroda: Groven - Lot 1

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, bendras aukštis: 1 100 mm, bendras svoris: 150 kg, bendras plotis: 550 mm, bendras ilgis: 900 mm, Nėra minimalaus kainos – garantuotas pardavimas aukščiausią kainą pasiūliusiam! Pateikus pasiūlymą, įsipareigojama laiku atsiimti įrangą – arba 2026-05-11–2026-05-13, arba 2026-05-18–2026-05-21 laikotarpiu! Dodpfx Ajyn Eqceg Noki ĮRENGINIO DUOMENYS Matmenys ir svoris Matmenys (I x P x A): 900 x 550 x 1.100 mm Svoris: 150 kg ĮRANGA Pagrindinė konstrukcija Išorės nuoroda: Groven - Lot 21

Būklė: naudotas, Electric dual screwdriver unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit features a pneumatic double stroke controlled via Festo valves and cylinders. Various monitoring systems for full automation are installed. Technical specifications: - Torque electric screwdriver: 0.6 Nm - Torque gearbox: max. 10 Nm - Speed: max. 20,000 rpm - Rated voltage: 3~ 0-230 VAC - Power consumption: max. 7 A (per screwdriver) - Pneumatic long-stroke cylinder: 80 mm - Pneumatic short-stroke cylinder: 20 mm - Pneumatic total stroke: 100 mm - Screwdriver spring stroke: 20 mm - Distance between the two screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Operation requires a Bosch Rexroth LT303 power module (power module not included) Both Screwdriver 1 and 2 each consist of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive Component details: Rexroth electric screwdriver unit Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Power consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Rexroth gearbox unit Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Rexroth encoder Type: 2DMC012 SZ2 Material No.: 0 Rated torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Rexroth straight drive Type: 2GA82 SZ2 1/4" SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Dkodpfx Agehxvu Eo Nji Installation length: 90 mm A 7m motor connection cable is included in the scope of supply. Overall dimensions (W x H x D): approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Būklė: naudotas, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on a handling device, handling system, or manipulator for screwdriving applications. Screwdriving unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed for full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight-drive output Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset output Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long-stroke: 30 mm Pneumatic short-stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Weight: 0.8 kg Gear unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Overall length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Overall length: 118.5 mm Straight-drive output Rexroth Type: 2GA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool fitting: 1/4" square Max. torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Overall length: 90 mm Djdpfxjfx Hyfe Ag Njki Offset output Rexroth Type: 2VNA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool fitting: 1/4" square Max. torque: 10 Nm Gear ratio: 1 Weight: 0.6 kg Overall length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Max. load capacity: 14 kg Handyflex outreach: 250 to 650 mm Handyflex outreach swivelled: max. 860 mm Swivel radius at full outreach: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition The blue steel pallet as a baseplate is not included. The blue steel baseplate is not part of the delivery.

Būklė: naudotas, Pneumatic press, compressed air press BOSCH type Serial no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 mm Ram surface: Ø 45 mm Maximum installation height: 235 mm Clamping shank bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force is infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic two-hand safety controls - Mounted on metal base frame with wooden panels Dodpfoh U Dtusx Ag Noki Space requirements (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table substructure: 140 kg Good condition

Būklė: naudotas, Pneumatic folding and bending machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-bending sheet metal seams Dsdpfxodzqblo Ag Njki For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is a double-over edge of sheet metal, created by folding it once over itself to increase its rigidity. Folding produces a rounded edge, reducing the risk of injury from cutting on a sharp sheet metal edge. Ideal for sheet metal processing for sheet metal furniture, cladding panels, or for air duct and silencer construction.

Būklė: naudotas, Pneumatic Screwdriver, Air Screwdriver DESOUTTER Pneumatic screwdriver, inline screwdriver for assembly technology Model: SD 140-AR510-S4Q Torque range: 0.6–14.0 Nm Speed: max. 510 rpm Operating pressure: 6 bar Air consumption: 8.7 l/s Bit holder: M6 Dkedpfx Asfgrrhog Nji - Selector switch for forward/reverse operation (rotary ring control) - Without automatic shut-off - Pneumatic control line Ø 4 mm - Pneumatic connection for screwdriver function min. Ø 10 mm - Aluminum bracket for handling device - Screw feed tube Ø 12 mm (internal diameter) Dimensions (L x W x H): 60 x 46 x 870 mm Weight: 2.8 kg Good condition 4 units available, price per screwdriver

Būklė: naudotas, TOX Clinching Unit – Pneumatic-Hydro TOX Press Hydro-Pneumatic Press TOX Pressotechnik KRAFT PAKET Model: CRS 03.62 Serial No.: 207599.2 Year of manufacture: approx. 2005 Pressing force: max. 80 kN = 8 tons Throat depth: 20 mm Installation height: 32 mm - integrated clinching tool - pneumatic valve for actuation - for joining by mechanical interlock (clinching) - for creating a form-fit connection between two sheets without piercing or heating the material Djdpodz Sqqsfx Ag Nski - mounted on stand - with basic electrical control and foot switch Net weight: 230 kg From a production line, sold without electrical control unit